The Influence of Wet Granulation Parameters on the Compaction Behavior and Tablet Strength of a Hydralazine Powder Mixture.

The aim of this paper was to describe the influence of high-shear wet granulation process parameters on tablet tensile strength and compaction behavior of a powder mixture and granules containing hydralazine. The hydralazine powder mixture and eight types of granules were compacted into tablets and evaluated using the Heckel, Kawakita and Adams analyses. The granules were created using two types of granulation liquid (distilled water and aqueous solution of polyvinylpyrrolidone), at different impeller speeds (500 and 700 rpm) and with different wet massing times (without wet massing and for 2 min). Granulation resulted in improved compressibility, reduced dustiness and narrower particle-size distribution. A significant influence of wet massing time on parameters from the Kawakita and Adams analysis was found. Wet massing time had an equally significant effect on tablet tensile strength, regardless of the granulation liquid used. Granules formed with the same wet massing time showed the same trends in tabletability graphs. Tablets created using a single-tablet press (batch compaction) and an eccentric tablet press showed opposite values of tensile strength. Tablets from granules with a higher bulk density showed lower strength during batch compaction and, conversely, higher strength during eccentric tableting.

Chitosan and Sodium Alginate Implementation as Pharmaceutical Excipients in Multiple-Unit Particulate Systems.

This study aimed to prepare and evaluate pellets containing acyclovir as a model drug. Pellets were prepared by the extrusion-spheronization process. Aqueous solutions of natural marine polymers (sodium alginate, chitosan) were compared to semi-synthetic hydroxypropyl methylcellulose (HPMC) in the role of binders. The study focused on the characterization of the pellet properties that are crucial for the formulation of the final dosage form, such as in multi-unit pellet system (MUPS) tablets or hard gelatin capsules filled with the pellets. Finally, the mentioned dosage forms were tested for drug dissolution. The morphology of pellets observed by scanning electron microscopy correlated with the shape evaluation performed by dynamic image analysis. Sodium alginate pellets exhibited the lowest value of sphericity (0.93), and many elongated rods and dumbbells were observed in this batch. Chitosan pellets had the highest value of sphericity (0.97) and were also less rough on the surface. The pellets maintained a constant surface geometry during the dissolution studies; they only reduced in size. The most significant reduction in size and weight was assessed after 2 h of dissolution testing. This fact was in line with the drug release from pellets in capsules or MUPS tablets, which was massive during the first hour, in both cases. The dissolution profiles of all of the batches were comparable.

Study of rheological and tableting properties of lubricated mixtures of co-processed dry binders for orally disintegrating tablets.

Co-processed dry binders for ODTs are important multifunctional excipients for tablet manufacturing by direct compression. Testing their binary mixtures with lubricants is an important aspect of their use in combination with drugs. The aim of this study was to evaluate the rheological and compression properties of lubricated mixtures of co-processed dry binders Parteck® ODT, Prosolv® ODT G2 and Ludiflash®, and subsequently also the compactability and disintegration time of the tablets made thereof. The lubricants employed were magnesium stearate and sodium stearyl fumarate in the concentrations of 0.5% and 1%. The best flowability was shown by Prosolv® ODT G2 combined with magnesium stearate in the concentration of 0.5%. Lubricated mixtures with Prosolv® ODT G2 showed a lower angle of internal friction as well as lower pre-compression energy values. The values of plastic deformation energy were the highest in the case of Prosolv® ODT G2, which was also reflected in the highest tablet strength. On the contrary, the ejection force values were the lowest for this co-processed dry binder. Magnesium stearate reduced the ejection force more effectively than sodium stearyl fumarate. Prosolv® ODT G2 tablets exhibited the highest tensile strength and shortest disintegration time.

Systematic Study of the Effects of High Shear Granulation Parameters on Process Yield, Granule Size, and Shape by Dynamic Image Analysis.

The aim of the work was to analyze the influence of process parameters of high shear granulation on the process yield and on the morphology of granules on the basis of dynamic image analysis. The amount of added granulation liquid had a significant effect on all monitored granulometric parameters and caused significant changes in the yield of the process. In regard of the shape, the most spherical granules with the smoothest surface were formed at a liquid to solid ratio of ≈1. The smallest granules were formed at an impeller speed of 700 rpm, but the granules formed at 500 rpm showed both the most desirable shape and the highest process yield. Variation in the shape factors relied not only on the process parameters, but also on the area equivalent diameter of the individual granules in the batch. A linear relationship was found between the amount of granulation liquid and the compressibility of the granules. Using response surface methodology, models for predicting the size of granules and process yield related to the amount of added liquid and the impeller speed were generated, on the basis of which the size of granules and yield can be determined with great accuracy.

Systematic study of paracetamol powder mixtures and granules tabletability: Key role of rheological properties and dynamic image analysis.

The aim of this systematic study was to analyze the granulometric and rheological behavior of tableting mixtures in relation to tabletability by single tablet and lab-scale batch compression with an eccentric tablet machine. Three mixtures containing 33, 50, and 66% of the cohesive drug paracetamol were prepared. The high compressibility of the powder mixtures caused problems with overcompaction or lamination in the single tablet compression method; due to jamming of the material during the filling of the die, the lab-scale batch compression was impossible. Using high shear granulation, the flow properties and tabletability were adjusted. A linear relationship between the span of granules and the specific energy measured by FT4 powder rheometer was detected. In parallel, a linear relationship between conditioned bulk density and the tensile strength of the tablets at lab-scale batch tableting was noted. The combination of dynamic image analysis and powder rheometry was useful for predicting the tabletability of pharmaceutical mixtures during the single tablet (design) compression and the lab-scale batch compression.