An in vitro evaluation of orthodontic aligner biomechanics around the maxillary arch.

INTRODUCTION: The objective of this study was to evaluate the forces and moments exerted by orthodontic aligners on 3 different displaced maxillary teeth and their adjacent supporting teeth. METHODS: An in vitro orthodontic simulator was used to measure the forces and moments of a 0.75-mm thick glycol-modified polyethylene terephthalate material for 3 maxillary teeth: central incisor, canine, and second premolar. Forces and moments were recorded for tested teeth displaced lingually one by one for 0.20 mm. Repeated measures of multivariate analysis of variance was used to assess the outcome. RESULTS: The mean buccolingual force applied on a displaced canine (2.25 ± 0.38 N) was significantly (P <0.001) more than the central incisor (1.49 ± 0.18 N) and second premolar (1.50 ± 0.16 N). The mean moment (that tends to tip the teeth buccally) exerted on a canine (-20.11 ± 5.27 Nmm) was significantly more (P <0.001) than the central incisor (-8.42 ± 1.67 Nmm) and second premolar (-11.45 ± 1.29 Nmm). The forces and moments acting on teeth adjacent to the displaced tooth were clinically significant and acted in opposing directions to those on the displaced tooth. CONCLUSIONS: The results of this study highlighted that for the same amount of displacement on a given tooth, the forces and moments imposed by the orthodontic aligner depend on location around the arch. These findings highlight the need to further study aligner mechanics around the dental arch and optimize aligner design to impose desired mechanical loads to avoid detrimental effects during orthodontic tooth movement.

Modern 3D cephalometry in pediatric orthodontics-downsizing the FOV and development of a new 3D cephalometric analysis within a minimized large FOV for dose reduction.

OBJECTIVES: Dose reduction achieved by downsizing the field of view (FOV) in CBCT scans has brought no benefit for pediatric orthodontics, until now. Standard 2D or 3D full-size cephalometric analyses require large FOVs and high effective doses. The aim of this study was to compare a new 3D reduced-FOV analysis using the Frankfurt horizontal (FH) plane as reference plane with a conventional full-size analysis using the Sella-Nasion (S-N) plane as reference plane. MATERIALS AND METHODS: Thirty-eight CBCT data sets were evaluated using full- and reduced-FOV analysis. The measurements of a total of 20 skeletal and dental standard 3D full-size variables were compared with the measurements of 22 corresponding 3D reduced-FOV variables. Statistical analysis was performed to prove mathematic relation between standard and alternative variables. Regression analyses were carried out. RESULTS: Coefficients of determination (R2) between 0.15 and 0.95 (p < 0.001-0.055) were described. All variables showed obvious relations of different strength except for SNA and its alternative Po_R-Or_R-A (°) (R2 = 0.15, p = 0.055), but a second variable Ba_A (mm) showed stronger relation (R2 = 0.28, p = 0.003). CONCLUSIONS: All standard variables related to the reference plane S-N could be described with alternative variables related to the FH. Further research should define more reliable landmarks for coordinate systems and reference points. CLINICAL RELEVANCE: Minimized large FOVs meet the demand of 3D cephalometric analyses and enable the application of CBCT scans in pediatric orthodontic patients in many specific indications. Dose reduction is accompanied by increasing access to all the advantages of 3D imaging over 2D imaging.

Craniofacial Analysis May Indicate Co-Occurrence of Skeletal Malocclusions and Associated Risks in Development of Cleft Lip and Palate.

Non-syndromic orofacial clefts encompass a range of morphological changes affecting the oral cavity and the craniofacial skeleton, of which the genetic and epigenetic etiologic factors remain largely unknown. The objective of this study is to explore the contribution of underlying dentofacial deformities (also known as skeletal malocclusions) in the craniofacial morphology of non-syndromic cleft lip and palate patients (nsCLP). For that purpose, geometric morphometric analysis was performed using full skull cone beam computed tomography (CBCT) images of patients with nsCLP (n = 30), normocephalic controls (n = 60), as well as to sex- and ethnicity- matched patients with an equivalent dentofacial deformity (n = 30). Our outcome measures were shape differences among the groups quantified via principal component analysis and associated principal component loadings, as well as mean shape differences quantified via a Procrustes distance among groups. According to our results, despite the shape differences among all three groups, the nsCLP group shares many morphological similarities in the maxilla and mandible with the dentofacial deformity group. Therefore, the dentoskeletal phenotype in nsCLP could be the result of the cleft and the coexisting dentofacial deformity and not simply the impact of the cleft.

Peridental bone changes after orthodontic tooth movement with fixed appliances: A cone-beam computed tomographic study.

OBJECTIVE: To quantify treatment-related changes in peridental bone height and thickness in orthodontic patients. MATERIALS AND METHODS: Cone-beam computed tomographs (CBCTs) of 43 patients (24 female, 19 male; mean age: 25 years, 5 months) who underwent orthodontic treatment with multibracket appliances for at least 1 year were chosen for retrospective evaluation. Dehiscence depth and changes in bone width and tooth inclination were determined for 954 teeth. RESULTS: There was a significant decrease in peridental bone height (dehiscence; -0.82 ± 1.47 mm) and bone thickness (-0.56 ± 0.7 and -0.69 ± 0.9 mm at 5 mm and 10 mm apical to the CEJ, respectively) during treatment (P < .001). A significantly greater dehiscence depth with increased vertical bone loss occurred in patients older than 30 years. In patients <30 years old, approximately 20% of the teeth showed defect depths >2 mm before treatment. In 90% of these patients, at least one tooth was affected. The maxillary canines and all mandibular teeth showed a higher risk for vestibular bone loss. Treatment changes in tooth inclination were correlated with horizontal bone loss. CONCLUSIONS: Based on these results, it seems reasonable to recommend that peridental bone in orthodontic patients older than 30 be evaluated on a routine basis due to the risk of increased vertical bone loss. Ninety percent of patients younger than 30 showed reduced bone height (dehiscence) of the periodontium of at least one tooth.

Use of cone beam computed tomography in implant dentistry: the International Congress of Oral Implantologists consensus report.

PURPOSE: The International Congress of Oral Implantologists has supported the development of this consensus report involving the use of Cone Beam Computed Tomography (CBCT) in implant dentistry with the intent of providing scientifically based guidance to clinicians regarding its use as an adjunct to traditional imaging modalities. MATERIALS AND METHODS: The literature regarding CBCT and implant dentistry was systematically reviewed. A PubMed search that included studies published between January 1, 2000, and July 31, 2011, was conducted. Oral presentations, in conjunction with these studies, were given by Dr. Erika Benavides, Dr. Scott Ganz, Dr. James Mah, Dr. Myung-Jin Kim, and Dr. David Hatcher at a meeting of the International Congress of Oral Implantologists in Seoul, Korea, on October 6-8, 2011. RESULTS: The studies published could be divided into four main groups: diagnostics, implant planning, surgical guidance, and postimplant evaluation. CONCLUSIONS: The literature supports the use of CBCT in dental implant treatment planning particularly in regards to linear measurements, three-dimensional evaluation of alveolar ridge topography, proximity to vital anatomical structures, and fabrication of surgical guides. Areas such as CBCT-derived bone density measurements, CBCT-aided surgical navigation, and postimplant CBCT artifacts need further research. ICOI RECOMMENDATIONS: All CBCT examinations, as all other radiographic examinations, must be justified on an individualized needs basis. The benefits to the patient for each CBCT scan must outweigh the potential risks. CBCT scans should not be taken without initially obtaining thorough medical and dental histories and performing a comprehensive clinical examination. CBCT should be considered as an imaging alternative in cases where the projected implant receptor or bone augmentation site(s) are suspect, and conventional radiography may not be able to assess the true regional three-dimensional anatomical presentation. The smallest possible field of view should be used, and the entire image volume should be interpreted.

Practical applications of cone-beam computed tomography in orthodontics.

BACKGROUND: Comprehensive visualization and records of the craniofacial complex have been goals in orthodontic imaging. These tasks have been performed by means of plaster, photographs and radiographs. These approaches have evolved across time, and cone-beam computed tomography (CBCT) has emerged as a comprehensive imaging modality for orthodontics. METHODS: The authors provide a practical guide for applying CBCT in orthodontics, with an emphasis on situations in which conventional imaging is limited. These situations include dental development, limits of tooth movement, airway assessment, craniofacial morphology and superimposition. RESULTS: Complexities of the craniofacial complex, dentition and airway present challenges in obtaining conventional images. CBCT has image-fidelity advantages over conventional imaging that can lead to improved visualization. CONCLUSIONS: CBCT is changing orthodontics with respect to clinically assessing patients and is evolving with respect to diagnosis, clinical techniques and outcomes. CLINICAL IMPLICATIONS: The clinical value proposition of CBCT is to describe craniofacial anatomy accurately and provide comprehensive information regarding anatomical relationships and individual patient findings for improved diagnosis, treatment planning and prognostication.

Oropharyngeal airway changes after rapid palatal expansion evaluated with cone-beam computed tomography.

INTRODUCTION: The aims of this retrospective study were to use cone-beam computed tomography (CBCT) to assess changes in the volume of the oropharynx in growing patients with maxillary constriction treated by rapid palatal expansion (RPE) and to compare them with changes in age- and sex-matched orthodontic patients. METHODS: The experimental group consisted of 24 patients (mean age, 12.8+/-1.88 years) with maxillary constriction who were treated with hyrax palatal expanders; the control group comprised 24 age- and sex-matched patients (mean age, 12.8+/-1.85 years) who were just starting regular orthodontic treatment. Beginning and progress CBCT scans, taken in the supine position, were analyzed with software to measure volume, length, and minimal cross-sectional area of the oropharyngeal airway. The 2 groups were compared with paired t tests. RESULTS: Only retropalatal airway volume was found to be significantly different between groups before treatment (P = 0.011), and this difference remained after treatment (P = 0.024). No other statistically significant differences were found relative to changes in volume, length, or minimum cross-sectional area of the oropharyngeal airway between the groups, but the molar-to-molar width after RPE increased significantly compared with the controls (P <0.001). CONCLUSIONS: Narrow oropharyngeal airways in growing patients with maxillary constriction was demonstrated. But there was no evidence to support the hypothesis that RPE could enlarge oropharyngeal airway volume.

Mini-implant behavior to shear tensile forces in the porcine mandible.

AIM: To determine the tangential tensile force loading behavior of mini-implants relative to cortical bone thickness in the porcine mandible. METHODS: Eighteen mini-implants were placed both anteriorly and posteriorly perpendicular to the bone surface in porcine mandibles and subjected to shear tests using a Universal Testing Machine (Instron). Further, cone beam CT was used to measure cortical bone thickness at each mini-implant site. RESULTS: The shear strength differed significantly between the anterior (mean 89.05 ± 35.9 N) and posterior (mean 179.85 ± 29.01 N) sites. The same was true for the cortical bone thickness (anteriorly, mean 3.59 ± 0.49 mm; posteriorly, mean 4.24 ± 0.5 mm). CONCLUSION: The shear forces required to dislodge mini-implants were much higher than forces typically applied for orthodontic purposes. Therefore, mandibular cortical bone supporting monocortical orthodontic mini-implants would most likely withstand immediate loading with tangential shear forces. In addition, it seems that mini-implants loaded tangentially continue to exhibit adequate anchorage for orthodontic forces even after they are displaced.

The validity of in vivo tooth volume determinations from cone-beam computed tomography.

OBJECTIVE: To determine the accuracy of volumetric analysis of teeth in vivo using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: The physical volume (Vw) of 24 bicuspids extracted for orthodontic purposes (16 were imaged with the I-CAT and 8 with the CB MercuRay) were determined using the water displacement technique. Corresponding pretreatment CBCT image data were uploaded into Amira 4.0 for segmentation and radiographic volume (Va). All measurements were performed twice by two observers. The statistical difference between Vw and Va was assessed using a paired t-test. The intraobserver and interobserver reliability were determined by calculating Pearson correlation coefficients and intraclass correlation coefficients. RESULTS: The overall mean Vw of teeth specimens was 0.553 +/- 0.082 cm3, while the overall mean Va was 0.548 +/- 0.079 cm3 (0.529 +/- 0.078 cm3 for observer 1 and 0.567 +/- 0.085 cm3 for observer 2). There were statistically significant differences between Va and Vw (P < .05). Between observer 1 and observer 2, Va measurements were statistically significantly different (P < .05). The interobserver and intraobserver correlation coefficient for Vw was high. Lastly, surface smoothing reduced the volume by 3% to 12%. CONCLUSIONS: In vivo determination of tooth volumes from CBCT data is feasible. The measurements slightly deviate from the physical volumes within -4% to 7%. Smoothing operations reduce volume measurements. Currently, no requirements for accuracy of volumetric determinations of tooth volume have been established.

Evaluation of 3D airway imaging of obstructive sleep apnea with cone-beam computed tomography.

This study evaluates the use of cone-beam Computer Tomography (CT) for imaging the upper airway structure of Obstructive Sleep Apnea (OSA) patients. The total airway volume and the anteroposterior dimension of oropharyngeal airway showed significant group differences between OSA and gender-matched controls, so if we increase sample size these measurements may distinguish the two groups. We demonstrate the utility of diagnosis of anatomy with the 3D airway imaging with cone-beam Computed Tomography.

Radiation absorbed in maxillofacial imaging with a new dental computed tomography device.

OBJECTIVE: The purpose of this investigation was to measure the tissue-absorbed dose and to calculate the effective dose for the NewTom 9000, a new generation of computed tomographic devices designed specifically for dental applications. Comparisons are made with existing reports on dose measurement and effective dose estimates for panoramic examinations and other computed tomographic imaging modalities for dental implants. STUDY DESIGN: Thermoluminescent dosimeters were implanted in a tissue-equivalent humanoid phantom at anatomic sites of interest. Absorbed dose measurements were obtained after single and double exposures. The averaged tissue-absorbed doses were used for the calculation of the whole-body effective dose. RESULTS: The effective dose for imaging of maxillomandibular volume with a NewTom 9000 machine is 50.3 muSv. CONCLUSION: The effective dose with the NewTom 9000 machine is significantly less than that achieved with other computed tomographic imaging methods and is within the range of traditional dental imaging modalities.

Teledentistry in rural California: a USC initiative.

Dentistry, in a synergistic combination with telecommunications technology and the Internet, has yielded a relatively new and exciting field that has endless potential. "Teledentistry" emerges from the fusion of dental practice and technology and can take on two forms--real-time consultation and "store and forward." The first entity to put teledentistry into practice was the Army, which, in 1994, successfully undertook consultations between dentists and service personnel located more than 100 miles apart. Since then, various institutions and organizations in the United States and farther afield have practiced teledentistry, with varying degrees of success. The Children's Hospital Los Angeles Teledentistry Project, being run in association with the University of Southern California's Mobile Dental Clinic, seeks to increase and enhance the quality of oral health care that is provided to children living in remote rural areas of California, areas often severely underserved by dental health providers. The project has three phases: Phase I involves the establishment and organization of the teledentistry network; Phase II will introduce technologies to provide orthodontic consultation and treatment; and Phase III will expand the network and provide increased specialty care into further areas of California and beyond, providing services to more children in desperate need of dental health care.