Exploring the potential of broadband Tamm plasmon resonance for enhanced photodetection.

Tamm plasmon polaritons (TPPs) have emerged as a promising platform for photodetector applications due to their strong light-matter interaction and potential for efficient light absorption. In this work, a design for a broadband photodetector (PD) based on the optical Tamm plasmon (OTS) state generated in a periodic metal-semiconductor-distributed Bragg reflector (DBR) geometry is proposed. The transfer matrix method (TMM) was used to study the propagation of electromagnetic waves through the proposed structure. By exciting the structure with incident light and analyzing the electric field profile within the multilayer structure at the resonant wavelength, we observe a distinctive electric field distribution that indicates the presence of Tamm plasmon modes. A comparative study was conducted to investigate the optical properties of a photodetector in the near-infrared (NIR) range by varying parameters such as thickness. By optimizing the thickness, we successfully achieved a broadband photoresponse in the photodetector, with a maximum responsivity of 21.8 mA/W at a wavelength of 1354 nm, which falls within the photonic bandgap region. FWHM was found to be 590 nm for the responsivity spectrum. The geometry also presents maximum absorption with FWHM calculated to be about 871.5 nm. The proposed geometry offers a broadband photoresponse, which is advantageous for the advancement of Tamm-based detector technologies. The ability to detect light over a wide operation range makes this mechanism highly beneficial for various applications.

N-Heterocyclic imino-catalyzed 1,4-regioselective azide-alkyne cycloaddition (AAC): a metal-free approach.

An unprecedented synthetic approach has been devised to efficiently synthesize regioselective 1,4-disubstituted 1,2,3-triazoles. This technique relies on the use of innovative metal-free highly basic N-heterocyclic imino catalysts. The experimental observations have been supported further by TD-DFT computational studies.

Efficient Synergistic Antibacterial Activity of α-MSH Using Chitosan-Based Versatile Nanoconjugates.

The application of antimicrobial peptides has emerged as an alternative therapeutic tool to encounter against multidrug resistance of different pathogenic organisms. α-Melanocyte stimulating hormone (α-MSH), an endogenous neuropeptide, is found to be efficient in eradicating infection of various kinds of Staphylococcus aureus, including methicillin-resistant Staphylococcus aureus (MRSA). However, the chemical stability and efficient delivery of these biopharmaceuticals (i.e., α-MSH) to bacterial cells with a significant antibacterial effect remains a key challenge. To address this issue, we have developed a chitosan-cholesterol polymer using a single-step, one-pot, and simple chemical conjugation technique, where α-MSH is loaded with a significantly high amount (37.7%), and the final product is obtained as chitosan-cholesterol α-MSH polymer-drug nanoconjugates. A staphylococcal growth inhibition experiment was performed using chitosan-cholesterol α-MSH and individual controls. α-MSH and chitosan-cholesterol both show bacterial growth inhibition by a magnitude of 50 and 79%, respectively. The killing efficiency of polymer-drug nanoconjugates was very drastic, and almost no bacterial colony was observed (∼100% inhibition) after overnight incubation. Phenotypic alternation was observed in the presence of α-MSH causing changes in the cell structure and shape, indicating stress on Staphylococcus aureus. As a further consequence, vigorous cell lysis with concomitant release of the cellular material in the nearby medium was observed after treatment of chitosan-cholesterol α-MSH nanoconjugates. This vigorous lysis of the cell structure is associated with extensive aggregation of the bacterial cells evident in scanning electron microscopy (SEM). The dose-response experiment was performed with various concentrations of chitosan-cholesterol α-MSH nanoconjugates to decipher the degree of the bactericidal effect. The concentration of α-MSH as low as 1 pM also shows significant inhibition of bacterial growth (∼40% growth inhibition) of Staphylococcus aureus. Despite playing an important role in inhibiting bacterial growth, our investigation on hemolytic assay shows that chitosan-cholesterol α-MSH is significantly nontoxic at a wide range of concentrations. In a nutshell, our analysis demonstrated novel antimicrobial activity of nanoparticle-conjugated α-MSH, which could be used as future therapeutics against multidrug-resistant Staphylococcus aureus and other types of bacterial cells.

Kinetics of Nanomedicine in Tumor Spheroid as an In Vitro Model System for Efficient Tumor-Targeted Drug Delivery With Insights From Mathematical Models.

Numerous strategies have been developed to treat cancer conventionally. Most importantly, chemotherapy shows its huge promise as a better treatment modality over others. Nonetheless, the very complex behavior of the tumor microenvironment frequently impedes successful drug delivery to the tumor sites that further demands very urgent and effective distribution mechanisms of anticancer drugs specifically to the tumor sites. Hence, targeted drug delivery to tumor sites has become a major challenge to the scientific community for cancer therapy by assuring drug effects to selective tumor tissue and overcoming undesired toxic side effects to the normal tissues. The application of nanotechnology to the drug delivery system pays heed to the design of nanomedicine for specific cell distribution. Aiming to limit the use of traditional strategies, the adequacy of drug-loaded nanocarriers (i.e., nanomedicine) proves worthwhile. After systemic blood circulation, a typical nanomedicine follows three levels of disposition to tumor cells in order to exhibit efficient pharmacological effects induced by the drug candidates residing within it. As a result, nanomedicine propounds the assurance towards the improved bioavailability of anticancer drug candidates, increased dose responses, and enhanced targeted efficiency towards delivery and distribution of effective therapeutic concentration, limiting toxic concentration. These aspects emanate the proficiency of drug delivery mechanisms. Understanding the potential tumor targeting barriers and limiting conditions for nanomedicine extravasation, tumor penetration, and final accumulation of the anticancer drug to tumor mass, experiments with in vivo animal models for nanomedicine screening are a key step before it reaches clinical translation. Although the study with animals is undoubtedly valuable, it has many associated ethical issues. Moreover, individual experiments are very expensive and take a longer time to conclude. To overcome these issues, nowadays, multicellular tumor spheroids are considered a promising in vitro model system that proposes better replication of in vivo tumor properties for the future development of new therapeutics. In this review, we will discuss how tumor spheroids could be used as an in vitro model system to screen nanomedicine used in targeted drug delivery, aiming for better therapeutic benefits. In addition, the recent proliferation of mathematical modeling approaches gives profound insight into the underlying physical principles and produces quantitative predictions. The hierarchical tumor structure is already well decorous to be treated mathematically. To study targeted drug delivery, mathematical modeling of tumor architecture, its growth, and the concentration gradient of oxygen are the points of prime focus. Not only are the quantitative models circumscribed to the spheroid, but also the role of modeling for the nanoparticle is equally inevitable. Abundant mathematical models have been set in motion for more elaborative and meticulous designing of nanomedicine, addressing the question regarding the objective of nanoparticle delivery to increase the concentration and the augmentative exposure of the therapeutic drug molecule to the core. Thus, to diffuse the dichotomy among the chemistry involved, biological data, and the underlying physics, the mathematical models play an indispensable role in assisting the experimentalist with further evaluation by providing the admissible quantitative approach that can be validated. This review will provide an overview of the targeted drug delivery mechanism for spheroid, using nanomedicine as an advantageous tool.

Supramolecularly enabled pH- triggered drug action at tumor microenvironment potentiates nanomedicine efficacy against glioblastoma.

The crucial balance of stability in blood-circulation and tumor-specific delivery has been suggested as one of the challenges for effective bench-to-bedside translation of nanomedicines (NMs). Herein, we developed a supramolecularly enabled tumor-extracellular (Tex) pH-triggered NM that can maintain the micellar structure with the entrapped-drug during systemic circulation and progressively release drug in the tumor by rightly sensing heterogeneous tumor-pH. Desacetylvinblastine hydrazide (DAVBNH), a derivative of potent anticancer drug vinblastine, was conjugated to an aliphatic ketone-functionalized poly(ethylene glycol)-b-poly(amino acid) copolymer and the hydrolytic stability of the derived hydrazone bond was efficiently tailored by exploiting the compartmentalized structure of polymer micelle. We confirmed an effective and safe therapeutic application of Tex pH-sensitive DAVBNH-loaded micelle (Tex-micelle) in orthotopic glioblastoma (GBM) models, extending median survival to 1.4 times in GBM xenograft and 2.6 times in GBM syngeneic model, compared to that of the free DAVBNH. The work presented here offers novel chemical insights into the molecular design of smart NMs correctly sensing Tex-pH via programmed functionalities. The practical engineering strategy based on a clinically relevant NM platform, and the encouraging therapeutic application of Tex-micelle in GBM, one of the most lethal human cancers, thus suggests the potential clinical translation of this system against other types of common cancers, including GBM.

Nuclear and perinuclear targeting efficiency of quantum dots depends on density of peptidic targeting residues on their surface.

Targeted delivery to the cell nucleus can enhance the efficiency of drugs with nuclear site of action (some anti-cancer agents, DNA drugs, etc.), and can reduce their toxicity. Such targeting can be attained using nano-drug delivery systems (nano-DDSs) decorated with nuclear targeting sequences (such as nuclear localization sequence peptides, NLS). Several types of nano-DDSs decorated with NLS peptides were designed, but their investigation usually did not include quantitate analysis of the decoration efficiency and its correlation with the nano-DDSs intracellular localization. Thus, the major mechanisms and limiting factors of the nano-DDSs nuclear targeting are largely unknown yet. In this study, we report quantitative data for specific nano-formulation (CdSe-ZnS quantum dots) that include the efficiencies of its decoration with NLS residues and of its nuclear and perinuclear targeting, and demonstrate correlation between these parameters. For instance, QDs decorated with 83, 246, and 265 NLS peptides accumulated efficiently in the nucleus of HeLa cells or its vicinity (an average of 30.4%, 43.3%, and 49.0% of the intracellular QDs, respectively). On the other hand, QDs decorated with 63, 231, and 308 scrambled peptides accumulated in the nucleus of HeLa cells or its vicinity to a much lower extent (an average of 17.3%, 21.1%, and 25.5% of the intracellular QDs, respectively). Thus, results of our study provide important insights into the structure-activity correlations (i.e., the relationships between the formulation properties and the intracellular fate of nano-DDSs) of nuclear-targeted drug delivery. We plan to apply the research tools that were developed in the course of this and our previous studies to investigate the nuclear and perinuclear targeting activities of different NLS sequences, and to investigate the effects of nano-DDSs size, charge, shape, decoration efficiency with nuclear targeting sequences, and other structural factors on nuclear and perinuclear targeting efficiency.

Efficient Subcellular Targeting to the Cell Nucleus of Quantum Dots Densely Decorated with a Nuclear Localization Sequence Peptide.

Organelle-targeted drug delivery can enhance the efficiency of the intracellularly acting drugs and reduce their toxicity. We generated core-shell type CdSe-ZnS quantum dots (QDs) densely decorated with NLS peptidic targeting residues using a 3-stage decoration approach and investigated their endocytosis and nuclear targeting efficiencies. The diameter of the generated QDs increased following the individual decoration stages (16.3, 18.9, and 21.9 nm), the ζ-potential became less negative (-33.2, -17.5, and -11.9 mV), and characteristic changes appeared in the FTIR spectra following decoration with the linker and NLS peptides. Quantitative analysis of the last decoration stage revealed that 37.9% and 33.2% of the alkyne-modified NLS groups that were added to the reaction mix became covalently attached or adsorbed to the QDs surface, respectively. These numbers correspond to 63.6 and 55.7 peptides conjugated or adsorbed to a single QD (the surface density of 42 and 37 conjugated and adsorbed peptides per 1000 nm(2) of the QDs surface), which is higher than in the majority of previous studies that reported decoration efficiencies of formulations intended for nuclear-targeted drug delivery. QDs decorated with NLS peptides undergo more efficient endocytosis, as compared to other investigated QDs formulations, and accumulated to a higher extent in the cell nucleus or in close vicinity to it (11.9%, 14.6%, and 56.1% of the QDs endocytosed by an average cell for the QD-COOH, QD-azide, and QD-NLS formulations, respectively). We conclude that dense decoration of QDs with NLS residues increased their endocytosis and led to their nuclear targeting (preferential accumulation in the cells nuclei or in close vicinity to them). The experimental system and research tools that were used in this study allow quantitative investigation of the mechanisms that govern the QDs nuclear targeting and their dependence on the formulation properties. These findings will contribute to the development of subcellularly targeted DDSs that will deliver specific drugs to the nuclei of the target cells and will enhance efficacy and reduce toxicity of these drugs.

Imaging Cancer Cells Expressing the Folate Receptor with Carbon Dots Produced from Folic Acid.

Development of new imaging tools for cancer cells in vitro and in vitro is important for advancing cancer research, elucidating drug effects upon cancer cells, and studying cellular processes. We showed that fluorescent carbon dots (C-dots) synthesized from folic acid can serve as an effective vehicle for imaging cancer cells expressing the folate receptor on their surface. The C-dots, synthesized through a simple one-step process from folic acid as the carbon source, exhibited selectivity towards cancer cells displaying the folate receptor, making such cells easily distinguishable in fluorescence microscopy imaging. Biophysical measurements and competition experiments both confirmed the specific targeting and enhanced uptake of C-dots by the folate receptor-expressing cells. The folic acid-derived C-dots were not cytotoxic, and their use in bioimaging applications could aid biological studies of cancer cells, identification of agonists/antagonists, and cancer diagnostics.

Limited Efficiency of Drug Delivery to Specific Intracellular Organelles Using Subcellularly "Targeted" Drug Delivery Systems.

Many drugs have been designed to act on intracellular targets and to affect intracellular processes inside target cells. For the desired effects to be exerted, these drugs should permeate target cells and reach specific intracellular organelles. This subcellular drug targeting approach has been proposed for enhancement of accumulation of these drugs in target organelles and improved efficiency. This approach is based on drug encapsulation in drug delivery systems (DDSs) and/or their decoration with specific targeting moieties that are intended to enhance the drug/DDS accumulation in the intracellular organelle of interest. During recent years, there has been a constant increase in interest in DDSs targeted to specific intracellular organelles, and many different approaches have been proposed for attaining efficient drug delivery to specific organelles of interest. However, it appears that in many studies insufficient efforts have been devoted to quantitative analysis of the major formulation parameters of the DDSs disposition (efficiency of DDS endocytosis and endosomal escape, intracellular trafficking, and efficiency of DDS delivery to the target organelle) and of the resulting pharmacological effects. Thus, in many cases, claims regarding efficient delivery of drug/DDS to a specific organelle and efficient subcellular targeting appear to be exaggerated. On the basis of the available experimental data, it appears that drugs/DDS decoration with specific targeting residues can affect their intracellular fate and result in preferential drug accumulation within an organelle of interest. However, it is not clear whether these approaches will be efficient in in vivo settings and be translated into preclinical and clinical applications. Studies that quantitatively assess the mechanisms, barriers, and efficiencies of subcellular drug delivery and of the associated toxic effects are required to determine the therapeutic potential of subcellular DDS targeting.

Delivery of drugs to intracellular organelles using drug delivery systems: Analysis of research trends and targeting efficiencies.

Targeting of drug delivery systems (DDSs) to specific intracellular organelles (i.e., subcellular targeting) has been investigated in numerous publications, but targeting efficiency of these systems is seldom reported. We searched scientific publications in the subcellular DDS targeting field and analyzed targeting efficiency and major formulation parameters that affect it. We identified 77 scientific publications that matched the search criteria. In the majority of these studies nanoparticle-based DDSs were applied, while liposomes, quantum dots and conjugates were used less frequently. The nucleus was the most common intracellular target, followed by mitochondrion, endoplasmic reticulum and Golgi apparatus. In 65% of the publications, DDSs surface was decorated with specific targeting residues, but the efficiency of this surface decoration was not analyzed in predominant majority of the studies. Moreover, only 23% of the analyzed publications contained quantitative data on DDSs subcellular targeting efficiency, while the majority of publications reported qualitative results only. From the analysis of publications in the subcellular targeting field, it appears that insufficient efforts are devoted to quantitative analysis of the major formulation parameters and of the DDSs' intracellular fate. Based on these findings, we provide recommendations for future studies in the field of organelle-specific drug delivery and targeting.

Inhibition of amyloid fibril growth and dissolution of amyloid fibrils by curcumin-gold nanoparticles.

Inhibition of amyloid fibrillation and clearance of amyloid fibrils/plaques are essential for the prevention and treatment of various neurodegenerative disorders involving protein aggregation. Herein, we report curcumin-functionalized gold nanoparticles (Au-curcumin) of hydrodynamic diameter 10-25 nm, which serve to inhibit amyloid fibrillation and disintegrate/dissolve amyloid fibrils. In nanoparticle form, curcumin is water-soluble and can efficiently interact with amyloid protein/peptide, offering enhanced performance in inhibiting amyloid fibrillation and dissolving amyloid fibrils. Our results imply that nanoparticle-based artificial molecular chaperones may offer a promising therapeutic approach to combat neurodegenerative disease.

Carbohydrate coated, folate functionalized colloidal graphene as a nanocarrier for both hydrophobic and hydrophilic drugs.

Although graphene based drug delivery has gained significant recent interest, the synthesis of colloidal graphene based nanocarriers with high drug loading capacities and with targeting ligands at the outer surface is a challenging issue. We have synthesized carbohydrate coated and folate functionalized colloidal graphene which can be used as a nanocarrier for a wide variety of hydrophobic and hydrophilic drugs. The synthesized colloidal graphene is loaded with paclitaxol, camptothecin, doxorubicin, curcumin and used for their targeted delivery to cancer cells. We demonstrate that this drug loaded functional graphene nanocarrier can successfully deliver drugs into target cells and offers an enhanced therapeutic performance. The reported approach can be extended to the cellular delivery of other hydrophobic and hydrophilic drugs and the simultaneous delivery of multiple drugs.

Synthesis of nanobioconjugates with a controlled average number of biomolecules between 1 and 100 per nanoparticle and observation of multivalency dependent interaction with proteins and cells.

Multivalency of nanoparticle and associated cooperative binding with biological interface is an important aspect in the development of nanoparticle based bioimaging probes. However, the preparation of such a nanobioconjugate with a controlled number of biomolecules per nanoparticle, typically between 1 and 100, is challenging. Here we report a generalized two-step bioconjugation method to prepare nanobioconjugates with a varied average number of biomolecules between 1 to 100 per nanoparticle that can be applied to different nanoparticles and biomolecules. Following this approach we have successfully synthesized quantum dot (QD) based bioconjugates with controlled average numbers of glucose or folate and found their number-dependent interaction with proteins and cells. We propose a method for exploiting the nanoparticle multivalency effect toward various biological interactions and preparing such nanobioconjugates for best performance.

Doped semiconductor nanocrystal based fluorescent cellular imaging probes.

Doped semiconductor nanocrystals such as Mn doped ZnS, Mn doped ZnSe and Cu doped InZnS, are considered as new classes of fluorescent biological probes with low toxicity. Although the synthesis in high quality of such nanomaterials is now well established, transforming them into functional fluorescent probes remains a challenge. Here we report a fluorescent cellular imaging probe made of high quality doped semiconductor nanocrystals. We have identified two different coating approaches suitable for transforming the as synthesized hydrophobic doped semiconductor nanocrystals into water-soluble functional nanoparticles. Following these approaches we have synthesized TAT-peptide- and folate-functionalized nanoparticles of 10-80 nm hydrodynamic diameter and used them as a fluorescent cell label. The results shows that doped semiconductor nanocrystals can be an attractive alternative for conventional cadmium based quantum dots with low toxicity.

Silicon nanoparticle based fluorescent biological label via low temperature thermal degradation of chloroalkylsilane.

A simple low temperature colloid-chemical synthetic method is reported for size controlled synthesis of hydrophobic silicon nanoparticles in the 1-10 nm range. These silicon nanoparticles show size dependent tunable visible emission from blue to red with fluorescence quantum yield in the range of 6-13%. These silicon nanoparticles can be subjected to extensive surface chemistry without significant loss of their fluorescence properties. The as-synthesized red emitting nanoparticles have been transformed into water soluble functional nanoprobes of 18 nm hydrodynamic diameter and 5% fluorescence quantum yield and used as fluorescent biological labels.

Carbon nanoparticle-based fluorescent bioimaging probes.

Fluorescent nanoparticle-based imaging probes have advanced current labelling technology and are expected to generate new medical diagnostic tools based on their superior brightness and photostability compared with conventional molecular probes. Although significant progress has been made in fluorescent semiconductor nanocrystal-based biological labelling and imaging, the presence of heavy metals and the toxicity issues associated with heavy metals have severely limited the application potential of these nanocrystals. Here, we report a fluorescent carbon nanoparticle-based, alternative, nontoxic imaging probe that is suitable for biological staining and diagnostics. We have developed a chemical method to synthesise highly fluorescent carbon nanoparticles 1-10 nm in size; these particles exhibit size-dependent, tunable visible emission. These carbon nanoparticles have been transformed into various functionalised nanoprobes with hydrodynamic diameters of 5-15 nm and have been used as cell imaging probes.

Thiol-directed synthesis of highly fluorescent gold clusters and their conversion into stable imaging nanoprobes.

Fluorescent gold clusters (FGCs) with tunable emission from blue to red and quantum yields in the range of 6-17% have been synthesized by simple modification of the conditions used for the synthesis of gold nanoparticles, namely by replacing the stronger reducing agent with a controlled amount of thiol. Various functional FGCs with hydrodynamic diameters of 5-12 nm have been successfully synthesized and used as cell labels. The results of our investigations strongly indicate that FGCs composed of Au(0) are more stable imaging probes than commonly reported red/NIR-emitting FGCs with a composition of Au(0)/Au(I), as this combination rapidly transforms into nonfluorescent large clusters on exposure to light. The FGC-based nanoprobes reported herein exhibit stable fluorescence upon continuous light exposure and can be used as imaging probes with low cytotoxicity.