Gradual pore formation in natural origin scaffolds throughout subcutaneous implantation.

This study used a rat subcutaneous implantation model to investigate gradual in situ pore formation in a self-regulating degradable chitosan-based material, which comprises lysozyme incorporated into biomimetic calcium phosphate (CaP) coatings at the surface to control the scaffold degradation and subsequent pore formation. Specifically, the in vivo degradation of the scaffolds, the in situ pore formation, and the tissue response were investigated. Chitosan or chitosan/starch scaffolds were studied with and without a CaP coating in the presence or absence of lysozyme for a total of six experimental groups. Twenty-four scaffolds per group were implanted, and eight scaffolds were retrieved at each of three time points (3, 6, and 12 weeks). Harvested samples were analyzed for weight loss, microcomputed tomography, and histological analysis. All scaffolds showed pronounced weight loss and pore formation as a function of time. The highest weight loss was 29.8% ± 1.5%, obtained at week 12 for CaP chitosan/starch scaffolds with lysozyme incorporated. Moreover, all experimental groups showed a significant increase in porosity after 12 weeks. At all time points no adverse tissue reaction was observed, and as degradation increased, histological analysis showed cellular ingrowth throughout the implants. Using this innovative methodology, the ability to gradually generate pores in situ was clearly demonstrated in vivo.

In vivo study of dendronlike nanoparticles for stem cells "tune-up": from nano to tissues.

The control of stem cell differentiation to obtain osteoblasts in vivo is still regarded as a challenge in stem-cell-based and bone-tissue engineering strategies. Biodegradable dexamethasone-loaded dendron-like nanoparticles (NPs) of carboxymethylchitosan/poly(amidoamine) dendrimer have been proposed as intracellular drug-delivery systems of bioactive molecules. In this study, combination of nanotechnology, stem-cell engineering and tissue engineering is proposed in pre-programming the fate of rat bone marrow stromal cells (RBMSCs) towards osteoblasts cells and development of new bone tissue, in vivo. This work demonstrated that the developed NPs were able to be taken up by RBMSCs, and exhibited a noncytotoxic behavior in vitro. The performance of the developed dendronlike NP system for the intracellular delivery of dexamethasone was investigated by seeding the engineered RBMSCs onto starch-polycaprolactone scaffolds ex vivo, and implanting subcutaneously in the back of Fischer 344/N rats (Syngeneic), in the absence of the typical osteogenic supplements. Favorable results were observed in vivo, thus suggesting that stem cell "tune-up" strategy can open up a new regenerative strategy for bone-tissue engineering. FROM THE CLINICAL EDITOR: In this study, a combination of nanotechnology, stem-cell engineering and tissue engineering is proposed in pre-programming the fate of rat bone marrow stromal cells (RBMSCs) towards osteoblasts cells and development of new bone tissue in vivo.

The effect of insulin-loaded chitosan particle-aggregated scaffolds in chondrogenic differentiation.

Osteochondral defect repair requires a tissue engineering approach that aims at mimicking the physiological properties and structure of two different tissues (cartilage and bone) using a scaffold-cell construct. One ideal approach would be to engineer in vitro a hybrid material using a single-cell source. For that purpose, the scaffold should be able to provide the adequate biochemical cues to promote the selective but simultaneous differentiation of both tissues. In this work, attention was paid primarily to the chondrogenic differentiation by focusing on the development of polymeric systems that provide biomolecules release to induce chondrogenic differentiation. For that, different formulations of insulin-loaded chitosan particle-aggregated scaffolds were developed as a potential model system for cartilage and osteochondral tissue engineering applications using insulin as a potent bioactive substance known to induce chondrogenic differentiation. The insulin encapsulation efficiency was shown to be high with values of 70.37 +/- 0.8%, 84.26 +/- 1.76%, and 87.23 +/- 1.58% for loadings of 0.05%, 0.5%, and 5%, respectively. The in vitro release profiles were assessed in physiological conditions mimicking the cell culture procedures and quantified by Micro-BCA protein assay. Different release profiles were obtained that showed to be dependent on the initial insulin-loading percentage. Further, the effect on prechondrogenic ATDC5 cells was investigated for periods up to 4 weeks by studying the influence of these release systems on cell morphology, DNA and glycosaminoglycan content, histology, and gene expression of collagen types I and II, Sox-9, and aggrecan assessed by real-time polymerase chain reaction. When compared with control conditions (unloaded scaffolds cultured with the standard chondrogenic-inducing medium), insulin-loaded scaffolds upregulated the Sox-9 and aggrecan expression after 4 weeks of culture. From the overall results, it is reasonable to conclude that the developed loaded scaffolds when seeded with ATDC5 can provide biochemical cues for chondrogenic differentiation. Among the tested formulations, the higher insulin-loaded system (5%) was the most effective in promoting chondrogenic differentiation.

Natural stimulus responsive scaffolds/cells for bone tissue engineering: influence of lysozyme upon scaffold degradation and osteogenic differentiation of cultured marrow stromal cells induced by CaP coatings.

This work proposes the use of nonporous, smart, and stimulus responsive chitosan-based scaffolds for bone tissue engineering applications. The overall vision is to use biodegradable scaffolds based on chitosan and starch that present properties that will be regulated by bone regeneration, with the capability of gradual in situ pore formation. Biomimetic calcium phosphate (CaP) coatings were used as a strategy to incorporate lysozyme at the surface of chitosan-based materials with the main objective of controlling and tailoring their degradation profile as a function of immersion time. To confirm the concept, degradation tests with a lysozyme concentration similar to that incorporated into CaP chitosan-based scaffolds were used to study the degradation of the scaffolds and the formation of pores as a function of immersion time. Degradation studies with lysozyme (1.5 g/L) showed the formation of pores, indicating an increase of porosity ( approximately 5-55% up to 21 days) resulting in porous three-dimensional structures with interconnected pores. Additional studies investigated the influence of a CaP biomimetic coating on osteogenic differentiation of rat marrow stromal cells (MSCs) and showed enhanced differentiation of rat MSCs seeded on the CaP-coated chitosan-based scaffolds with lysozyme incorporated. At all culture times, CaP-coated chitosan-based scaffolds with incorporated lysozyme demonstrated greater osteogenic differentiation of MSCs, bone matrix production, and mineralization as demonstrated by calcium deposition measurements, compared with controls (uncoated scaffolds). The ability of these CaP-coated chitosan-based scaffolds with incorporated lysozyme to create an interconnected pore network in situ coupled with the demonstrated positive effect of these scaffolds upon osteogenic differentiation of MSCs and mineralized matrix production illustrates the strong potential of these scaffolds for application in bone tissue engineering strategies.

Bilayered chitosan-based scaffolds for osteochondral tissue engineering: influence of hydroxyapatite on in vitro cytotoxicity and dynamic bioactivity studies in a specific double-chamber bioreactor.

Osteochondral tissue engineering presents a current research challenge due to the necessity of combining both bone and cartilage tissue engineering principles. In the present study, bilayered chitosan-based scaffolds are developed based on the optimization of both polymeric and composite scaffolds. A particle aggregation methodology is proposed in order to achieve an improved integrative bone-cartilage interface needed for this application, since any discontinuity is likely to cause long-term device failure. Cytotoxicity was evaluated by the MTS assay with the L929 fibroblast cell line for different conditions. Surprisingly, in composite scaffolds using unsintered hydroxyapatite, cytotoxicity was observed in vitro. This work reports the investigation that was conducted to overcome and explain this behaviour. It is suggest that the uptake of divalent cations may induce the cytotoxic behaviour. Sintered hydroxyapatite was consequently used and showed no cytotoxicity when compared to the controls. Microcomputed tomography (micro-CT) was carried out to accurately quantify porosity, interconnectivity, ceramic content, particle and pore sizes. The results showed that the developed scaffolds are highly interconnected and present the ideal pore size range to be morphometrically suitable for the proposed applications. Dynamical mechanical analysis (DMA) demonstrated that the scaffolds are mechanically stable in the wet state even under dynamic compression. The obtained elastic modulus was, respectively, 4.21+/-1.04, 7.98+/-1.77 and 6.26+/-1.04 MPa at 1 Hz frequency for polymeric, composite and bilayered scaffolds. Bioactivity studies using both a simulated body fluid (SBF) and a simulated synovial fluid (SSF) were conducted in order to assure that the polymeric component for chondrogenic part would not mineralize, as confirmed by scanning electron microscopy (SEM), inductively coupled plasma-optical emission spectroscopy (ICP) and energy-dispersive spectroscopy (EDS) for different immersion periods. The assays were carried out also under dynamic conditions using, for this purpose, a specifically designed double-chamber bioreactor, aiming at a future osteochondral application. It was concluded that chitosan-based bilayered scaffolds produced by particle aggregation overcome any risk of delamination of both polymeric and composite parts designed, respectively, for chondrogenic and osteogenic components that are mechanically stable. Moreover, the proposed bilayered scaffolds could serve as alternative, biocompatible and safe biodegradable scaffolds for osteochondral tissue engineering applications.

Macroporous hydroxyapatite scaffolds for bone tissue engineering applications: physicochemical characterization and assessment of rat bone marrow stromal cell viability.

In this work, a new methodology is reported for developing hydroxyapatite (HA) scaffolds using an organic sacrifice template. The novelty of work consists of possibility of obtaining porous and highly interconnected scaffolds mimicking the sacrificial component. Our purpose consisted of evaluating the physicochemical properties of the HA scaffolds by means of Fourier transform infra-red spectroscopy, X-ray diffraction analysis, and scanning electron microscopy (SEM) attached with an X-ray detector. The HA scaffolds obtained possess a porosity of approximately 70%, and macropores diameter in the range of 50-600 microm. In contrast, results regarding the microcomputed tomography analysis have demonstrated both high pore uniformity and interconnectivity across the scaffolds. The compressive strength of the HA scaffolds was found to be 30.2 +/- 6.0 MPa. Bioactivity of the HA scaffolds was assessed by immersion into a simulated body fluid solution, in vitro. SEM observations have showed a deposition of apatite on the surface of the HA scaffolds, with a "cauliflower-like" morphology after 1 day, and tend to be more pronounced with the immersion time. The changes in calcium and phosphorus concentration were monitored by inductively-coupled plasma optical emission spectrometry. Cytotoxicity of the HA scaffolds was preliminarily investigated by carrying direct observation of mouse fibroblasts cells (L929 cell-line) death in the inverted microscope, and then cell viability was determined by means of carrying out a MTS assay. Complementarily, a luminescent cell viability assay based on the quantification of adenosine triphosphate was performed using rat bone marrow stromal cells (RBMSCs). A LIVE/DEAD assay and SEM analysis allowed the visualization of the RBMSCs adhesion and proliferation on the surface of the HA scaffolds. According to the results obtained from 3D architecture, mechanical properties, biocompatibility, and adhesion tests, it is suggested that HA scaffolds has potential to find applications in bone tissue engineering scaffolding.

The role of lipase and alpha-amylase in the degradation of starch/poly(epsilon-caprolactone) fiber meshes and the osteogenic differentiation of cultured marrow stromal cells.

The present work studies the influence of hydrolytic enzymes (alpha-amylase or lipase) on the degradation of fiber mesh scaffolds based on a blend of starch and poly(epsilon-caprolactone) (SPCL) and the osteogenic differentiation of osteogenic medium-expanded rat bone marrow stromal cells (MSCs) and subsequent formation of extracellular matrix on these scaffolds under static culture conditions. The biodegradation profile of SPCL fiber meshes was investigated using enzymes that are specifically responsible for the enzymatic hydrolysis of SPCL using concentrations similar to those found in human serum. These degradation studies were performed under static and dynamic conditions. After several degradation periods (3, 7, 14, 21, and 30 days), weight loss measurements and micro-computed tomography analysis (specifically porosity, interconnectivity, mean pore size, and fiber thickness) were performed. The SPCL scaffolds were seeded with rat MSCs and cultured for 8 and 16 days using complete osteogenic media with and without enzymes (alpha-amylase or lipase). Results indicate that culture medium supplemented with enzymes enhanced cell proliferation after 16 days of culture, whereas culture medium without enzymes did not. No calcium was detected in groups cultured with alpha-amylase or without enzymes after each time period, although groups cultured with lipase presented calcium deposition after the eighth day, showing a significant increase at the sixteenth day. Lipase appears to positively influence osteoblastic differentiation of rat MSCs and to enhance matrix mineralization. Furthermore, scanning electron microscopy images showed that the enzymes did not have a deleterious effect on the three-dimensional structure of SPCL fiber meshes, meaning that the scaffolds did not lose their structural integrity after 16 days. Confocal micrographs have shown cells to be evenly distributed and infiltrated within the SPCL fiber meshes up to 410 microm from the surface. This study demonstrates that supplementation of culture media with lipase holds great potential for the generation of bone tissue engineering constructs from MSCs seeded onto SPCL fiber meshes, because lipase enhances the osteoblastic differentiation of the seeded MSCs and promotes matrix mineralization without harming the structural integrity of the meshes over 16 days of culture.

Morphology, mechanical characterization and in vivo neo-vascularization of chitosan particle aggregated scaffolds architectures.

The present study intended to evaluate the performance of chitosan-based scaffolds produced by a particle aggregation method aimed to be used in tissue engineering applications addressing key issues such as morphological characteristics, mechanical performance and in vivo behaviour. It is claimed that the particle aggregation methodology may present several advantages, such as combine simultaneously a high interconnectivity with high mechanical properties that are both critical for an in vivo successful application. In order to evaluate these properties, micro-Computed Tomography (micro-CT) and Dynamical Mechanical Analysis (DMA) were applied. The herein proposed scaffolds present an interesting morphology as assessed by micro-CT that generally seems to be adequate for the proposed applications. At a mechanical level, DMA has shown that chitosan scaffolds have an elastic behaviour under dynamic compression solicitation, being simultaneously mechanically stable in the wet state and exhibiting a storage modulus of 4.21+/-1.04MPa at 1Hz frequency. Furthermore, chitosan scaffolds were evaluated in vivo using a rat muscle-pockets model for different implantation periods (1, 2 and 12 weeks). The histological and immunohistochemistry results have demonstrated that chitosan scaffolds can provide the required in vivo functionality. In addition, the scaffolds interconnectivity has been shown to be favourable to the connective tissues ingrowth into the scaffolds and to promote the neo-vascularization even in early stages of implantation. It is concluded that the proposed chitosan scaffolds produced by particle aggregation method are suitable alternatives, being simultaneously mechanical stable and in vivo biofunctional that might be used in load-bearing tissue engineering applications, including bone and cartilage regeneration.

Natural origin scaffolds with in situ pore forming capability for bone tissue engineering applications.

This work describes the development of a biodegradable matrix, based on chitosan and starch, with the ability to form a porous structure in situ due to the attack by specific enzymes present in the human body (alpha-amylase and lysozyme). Scaffolds with three different compositions were developed: chitosan (C100) and chitosan/starch (CS80-20, CS60-40). Compressive test results showed that these materials exhibit very promising mechanical properties, namely a high modulus in both the dry and wet states. The compressive modulus in the dry state for C100 was 580+/-33MPa, CS80-20 (402+/-62MPa) and CS60-40 (337+/-78MPa). Degradation studies were performed using alpha-amylase and/or lysozyme at concentrations similar to those found in human serum, at 37 degrees C for up to 90 days. Scanning electron micrographs showed that enzymatic degradation caused a porous structure to be formed, indicating the potential of this methodology to obtain in situ forming scaffolds. In order to evaluate the biocompatibility of the scaffolds, extracts and direct contact tests were performed. Results with the MTT test showed that the extracts of the materials were clearly non-toxic to L929 fibroblast cells. Analysis of cell adhesion and morphology of seeded osteoblastic-like cells in direct contact tests showed that at day 7 the number of cells on CS80-20 and CS60-40 was noticeably higher than that on C100, which suggests that starch containing materials may promote cell adhesion and proliferation. This combination of properties seems to be a very promising approach to obtain scaffolds with gradual in vivo pore forming capability for bone tissue engineering applications.

Assessment of the suitability of chitosan/polybutylene succinate scaffolds seeded with mouse mesenchymal progenitor cells for a cartilage tissue engineering approach.

In this work, scaffolds derived from a new biomaterial originated from the combination of a natural material and a synthetic material were tested for assessing their suitability for cartilage tissue engineering applications. In order to obtain a better outcome result in terms of scaffolds' overall properties, different blends of natural and synthetic materials were created. Chitosan and polybutylene succinate (C-PBS) 50/50 (wt%) were melt blended using a twin-screw extruder and processed into 5 x 5 x 5 mm scaffolds by compression moulding with salt leaching. Micro-computed tomography analysis calculated an average of 66.29% porosity and 92.78% interconnectivity degree for the presented scaffolds. The salt particles used ranged in size between 63 and 125 mum, retrieving an average pore size of 251.28 mum. Regarding the mechanical properties, the compressive modulus was of 1.73 +/- 0.4 MPa (E(sec) 1%). Cytotoxicity evaluation revealed that the leachables released by the developed porous structures were not harmful to the cells and hence were noncytotoxic. Direct contact assays were carried out using a mouse bone marrow-derived mesenchymal progenitor cell line (BMC9). Cells were seeded at a density of 5 x 10(5) cells/scaffold and allowed to grow for periods up to 3 weeks under chondrogenic differentiating conditions. Scanning electron microscopy analysis revealed that the cells were able to proliferate and colonize the scaffold structure, and MTS test demonstrated cell viability during the time of the experiment. Finally, Western blot performed for collagen type II, a natural cartilage extracellular matrix component, showed that this protein was being expressed by the end of 3 weeks, which seems to indicate that the BMC9 cells were being differentiated toward the chondrogenic pathway. These results indicate the adequacy of these newly developed C-PBS scaffolds for supporting cell growth and differentiation toward the chondrogenic pathway, suggesting that they should be considered for further studies in the cartilage tissue engineering field.

Natural-origin polymers as carriers and scaffolds for biomolecules and cell delivery in tissue engineering applications.

The present paper intends to overview a wide range of natural-origin polymers with special focus on proteins and polysaccharides (the systems more inspired on the extracellular matrix) that are being used in research, or might be potentially useful as carriers systems for active biomolecules or as cell carriers with application in the tissue engineering field targeting several biological tissues. The combination of both applications into a single material has proven to be very challenging though. The paper presents also some examples of commercially available natural-origin polymers with applications in research or in clinical use in several applications. As it is recognized, this class of polymers is being widely used due to their similarities with the extracellular matrix, high chemical versatility, typically good biological performance and inherent cellular interaction and, also very significant, the cell or enzyme-controlled degradability. These biocharacteristics classify the natural-origin polymers as one of the most attractive options to be used in the tissue engineering field and drug delivery applications.

Novel hydroxyapatite/chitosan bilayered scaffold for osteochondral tissue-engineering applications: Scaffold design and its performance when seeded with goat bone marrow stromal cells.

Recent studies suggest that bone marrow stromal cells are a potential source of osteoblasts and chondrocytes and can be used to regenerate damaged tissues using a tissue-engineering (TE) approach. However, these strategies require the use of an appropriate scaffold architecture that can support the formation de novo of either bone and cartilage tissue, or both, as in the case of osteochondral defects. The later has been attracting a great deal of attention since it is considered a difficult goal to achieve. This work consisted on developing novel hydroxyapatite/chitosan (HA/CS) bilayered scaffold by combining a sintering and a freeze-drying technique, and aims to show the potential of such type of scaffolds for being used in TE of osteochondral defects. The developed HA/CS bilayered scaffolds were characterized by Fourier transform infra-red spectroscopy, X-ray diffraction analysis, micro-computed tomography, and scanning electron microscopy (SEM). Additionally, the mechanical properties of HA/CS bilayered scaffolds were assessed under compression. In vitro tests were also carried out, in order to study the water-uptake and weight loss profile of the HA/CS bilayered scaffolds. This was done by means of soaking the scaffolds into a phosphate buffered saline for 1 up to 30 days. The intrinsic cytotoxicity of the HA scaffolds and HA/CS bilayered scaffolds extract fluids was investigated by carrying out a cellular viability assay (MTS test) using Mouse fibroblastic-like cells. Results have shown that materials do not exert any cytotoxic effect. Complementarily, in vitro (phase I) cell culture studies were carried out to evaluate the capacity of HA and CS layers to separately, support the growth and differentiation of goat marrow stromal cells (GBMCs) into osteoblasts and chondrocytes, respectively. Cell adhesion and morphology were analysed by SEM while the cell viability and proliferation were assessed by MTS test and DNA quantification. The chondrogenic differentiation of GBMCs was evaluated measuring the glucosaminoglycans synthesis. Data showed that GBMCs were able to adhere, proliferate and osteogenic differentiation was evaluated by alkaline phosphatase activity and immunocytochemistry assays after 14 days in osteogenic medium and into chondrocytes after 21 days in culture with chondrogenic medium. The obtained results concerning the physicochemical and biological properties of the developed HA/CS bilayered scaffolds, show that these constructs exhibit great potential for their use in TE strategies leading to the formation of adequate tissue substitutes for the regeneration of osteochondral defects.

Starch-based microspheres produced by emulsion crosslinking with a potential media dependent responsive behavior to be used as drug delivery carriers.

This paper describes the development and characterization of starch microspheres for being used as drug delivery carriers in tissue engineering applications. The developed starch microspheres can be further loaded with specific growth factors and immobilized in scaffolds, or administrated separately with scaffolds. Furthermore and due to the processing conditions used, it is expected that these microspheres can be also used to encapsulate living cells. The aim of this study was to evaluate the efficacy of this methodology for further studies with biologically active agents or living cells. The starch microspheres were prepared using an emulsion crosslinking technique at room temperature to allow for the loading of biologically active agents. A preliminary study was performed to evaluate the incorporation of a model drug (nonsteroidal anti-inflammatory drug-NSAID) and investigate its release profile as function of changes in the medium parameters, such as ionic strength and pH. The developed starch-based drug delivery system has shown to be dependent on the ionic strength of the release medium. From preliminary results, the release seems to be pH-dependent due to the drug solubility. It was found that the developed microspheres and the respective processing route are appropriate for further studies. In fact, and based in the processing conditions and characterization, the developed system present a potential for the loading of different growth factors or even living cells on future studies with these systems for improving bone regeneration in tissue engineering, especially because the crosslinking reaction of the microspheres takes place at room temperature.