Docetaxel in chitosan-based nanocapsules conjugated with an anti-Tn antigen mouse/human chimeric antibody as a promising targeting strategy of lung tumors.

The aim of this work was to evaluate the physicochemical and biological properties of docetaxel (DCX) loaded chitosan nanocapsules (CS Nc) functionalized with the monoclonal antibody Chi-Tn (CS-PEG-ChiTn mAb Nc) as a potential improvement treatment for cancer therapy. The Tn antigen is highly specific for carcinomas, and this is the first time that such structure is targeted for drug delivery. The nanocapsules (Ncs), formed as a polymeric shell around an oily core, allowed a 99.9% encapsulation efficiency of DCX with a monodispersity particle size in the range of 200 nm and a high positive surface charge that provide substantial stability to the nanosystems. Release profile of DCX from Ncs showed a sustained and pH dependent behavior with a faster release at acidic pH, which could be favorable in the intracellular drug delivery. We have designed PEGylated CS Nc modified with a monoclonal antibody which recognize Tn antigen, one of the most specific tumor associated antigen. A biotin-avidin approach achieved the successful attachment of the antibody to the nanocapsules. Uptake studies and viability assay conducted in A549 human lung cancer cell line in vitro demonstrate that ChiTn mAb enhance nanoparticles internalization and cell viability reduction. Consequently, these ChiTn functionalized nanocapsules are promising carriers for the active targeting of DCX to Tn expressing carcinomas.

Marcado con 99m de liposomas convencionales y su evaluación biológica / 99mTc-labeling and biological evaluation of conventional liposomes

Introducción. Los liposomas son sistemas supramoleculares autoensamblables preparados ad hoc, compuestos de fosfolípidos y colesterol, diseñados para transporte de fármacos o radionucleidos. El 99mTc es el radionucleido más empleado por sus propiedades físicas apropiadas para la adquisición de imágenes y estudios en pacientes en el área de medicina nuclear (emisor gamma puro con E = 140 KeV , t1/2 = 6 horas). Objetivo. Evaluar la potencialidad de liposomas convencionales marcados con 99mTc como agente de diagnóstico de procesos tumorales. Método. La composición estudiada es: fosfatidilcolina, dioleilfosfatidiletanolamina y colesterol (1.1:0.4:1 relación molar). Se utilizó como agente reductor SnF2, en diferentes cantidades para optimizar el marcado. La pureza radioquímica y eficiencia de marcado se evaluaron con sistemas cromatográficos ITLC-SG FM NaCl 0,9 por ciento, ITLC-SG FM Piridina:ácido acético:agua (3:5:1.5 v/v). Se adquirieron imágenes a 1 h post inyección de los liposomas en ratones sanos y portadores de tumor mamario espontáneo. Resultados. El liposoma marcado mostró estabilidad durante 24 h, siendo la cantidad óptima de reductor 138 ug. La mejor captación en tumor fue a 1 h post administración del radiofármaco en los estudios centellográficos. Conclusiones. El método optimizado permite obtener liposomas marcados con 99mTc en forma sencilla, eficiente y estable. Estos radiofármacos mostraron un comportamiento fiscoquímico y biológico adecuado como agentes de diagnóstico tumoral requiriéndose estudios posteriores para su confirmación.

Background. Liposomes are self-assembled supramolecular systems, composed by phospholipids and cholesterol, designed for the transportation of drugs or radionuclides. Physical properties of 99mTc (pure gamma emitter with E = 140 KeV, t1/2= 6 hours) makes it useful for scintigraphic imaging. Purpose. The goal of this study was to evaluate 99mTc labeled conventional liposomes as potential diagnostic agents for malignant lesions. Methods. The studied liposome composition was hosphatidylcholine: dioleilphosphatidylcholine: cholesterol (1.1:0.4:1molar rate). In order to optimize the labeling, SnF2 was used as reducing agent. Radiochemical purity and labeling efficiency were evaluated using ascending thin layer chromatography. Scintigraphy images were obtained at 1 hour post-injection of labeled liposomes to healthy mice and with spontaneous breast tumors. Results. Labeled liposomes showed stability during 24 hours, being 138 ug the optimal amount of reducing agent for the technique used. Conclusions. The described method allows the production of 99mTc labeled liposomes in a simple, efficient and stable way. The radiopharmaceutical showed a physicochemical and biological behavior that allows its potential use as a tumor imaging agent, although further studies are required to confirm this issue.

Diseño de liposomas para el transporte de diclofenac sódico / Design of liposomes as carriers for sodium diclofenac

El objetivo de este trabajo es diseñar y preparar liposomas convencionales que contengan un fármaco anfifílico. Para ello, se diseñó una formulación de este tipo de liposomas preparados mediante el método de agitación manual. La optimización de la distribución de tamaño liposomal se realizó por dos métodos: sonicación y extrusión. Este último generó liposomas de menor diámetro medio y menor rango de diámetros, siendo el de elección para obtener liposomas de un fármaco anfifílico modelo (diclofenac sódico). Su incorporación se realizó en la membrana lipídica y en el volumen acuoso de los liposomas, y en cada caso se compararon los porcentajes de captura y distribución de tamaños. Ambas determinaciones resultaron similares para los dos tipos de liposomas. También se determinó la cesión de ambos tipos de diclofenac liposomal y se compararon entre ellas con una solución del fármaco libre. Las cesiones de los dos tipos de diclofenac liposomal fueron comparables mientras que ambas difirieron significativamente de la del fármaco libre.

The goal of this work is to design and prepare conventional liposomes containing an amphiphillic drug. Conventional liposomes were prepared by hand shaken method.The liposomal distribution size was optimized by sonication and extrusion. Extrusion produced the lower mean diameter and the lower diameter range, so it was chosen for the preparation of liposomes containing a model amphiphilic drug (sodium diclofenac). The drug encapsulation was performed in the liposomes lipidic bilayer and in the aqueous volume. The capture percentage and size distribution were compared for each case. Both determinations were similar for both kinds of liposomes. The cession was determined for each kind of liposomes containing diclofenac and compared between them and a solution of free drug. The cessions were similar for both liposomal formulation and they were very different from free drug cession.

Actual bioavailability of divalproex sodium extended-release tablets and its clinical implications

Divalproex sodium extended-release dosage form (divalproex-ER) has been promoted as innovative formulation for the treatment of epilepsy and manic disorders, and for migraine headache prevention, with the advantage of being dosing once a day. Due to a significant decreasing in the peak-trough fluctuation of plasma valproic acid levels, in comparison with the twice-daily dosing of conventional delayed-release formulations (divalproex-DR), concentration-dependent side effects would be prevented. However the main constraint for divalproex-ER usage is the need to be administered in a higher daily dose, because of its lower bioavailability, in order to prevent eventual breakthrough seizures when patients are switched from the twice-daily divalproex DR regimen. Taking into account free plasma drug levels, divalproex ER/DR relative bioavailability could be assessed as low as 75 percent in fasting condition. In order to overcome the need of increase divalproex-ER daily dose, maintenance of the twice-daily regimen is suggested. Divalproex-ER administered every 12 hours not only increases steady state trough concentration to a higher value in comparison with divalproex-DR, avoiding inefficacy of the treatment, but also achieves the safest manner to treat patients with valproic acid because of reaching practically a plateau profile of drug levels.

Divalproato de sodio de liberación prolongada (divalproex-ER) es un producto innovador que ha sido promovido tanto para el tratamiento de la epilepsia y de los desórdenes maníacos como también para la prevención de la migraña, con la ventaja de poder administrarse una sola vez al día. Dado que la fluctuación de niveles plasmáticos de ácido valproico resulta menor que la originada por la administración dos veces al día del producto convencional de liberación retardada (divalproex-DR), se estarían previniendo los efectos secundarios dependientes de la concentración del fármaco. Sin embargo, y considerando la menor biodisponibilidad del producto, el uso de divalproex-ER tiene el principal inconveniente de necesitar una mayor dosis diaria a los efectos de evitar una eventual reaparición de crisis cuando los pacientes cambian de tratamiento desde divalproex-DR. Teniendo en cuenta los niveles plasmáticos libres del fármaco, la biodisponibilidad relativa divalproex ER/DR podría afirmarse que sea aún más baja, tanto como 75 por ciento cuando los estudios son realizados en ayunas. A los efectos de no incrementar la dosis diaria de divalproex-ER se sugiere mantener un régimen de administración cada 12 horas. La administración de divalproex-ER dos veces al día no sólo incrementa las concentraciones de valle, respecto a divalproex-DR, sino que logra un perfil de niveles de ácido valproico prácticamente de meseta, lográndose así un tratamiento eficaz y con la mayor seguridad para los pacientes.

188Re radiopharmaceuticals for radiosynovectomy: evaluation and comparison of tin colloid, hydroxyapatite and tin-ferric hydroxide macroaggregates.

BACKGROUND: Radiosynovectomy is a therapy used to relieve pain and inflammation from rheumatoid arthritis and related diseases. In this study three 188Re particulate compounds were characterized according to their physico-chemical properties and their biological behavior in rabbits. The results were compared in order to establish which was the radiopharmaceutical that better fits the requirements of this kind of radiotherapy. METHODS: Three radiopharmaceutical formulations, tin colloid, hydroxyapatite particles (HA) and ferric hydroxide macroaggregates coated with tin colloid (FHMA), were physically characterized (number, volume and surface of the particles). For this purpose laser diffraction methodology was used. To evaluate cavity leakage of activity the following studies in New Zealand rabbits were performed: scintigraphic images for 48 hr after intraarticular injection of each radiopharmaceutical, biodistribution at 48 hr and urine samples collection during the first 24 hr post-radiopharmaceutical administration. RESULTS: Labeling procedures for 188Re-HA and 188Re-Sn-FHMA were labour intensive while 188Re-Sn was easily prepared. Furthermore, 188Re-Sn colloid offered the greatest surface area in the 2-10 microm range and was obtained with a radiochemical purity over 95%, while percentage of bound activity for 188Re-HA and 188Re-Sn-FHMA were 55% and 92% respectively. Stability was verified for the three radiopharmaceuticals for 24 hr. Scintigraphic studies and biodistribution in rabbits after intraarticular administration of the radiopharmaceuticals showed relevant activity only in the knee, this being over 90% of the residual activity in the whole body at 48 hr in every case. Renal elimination of 188Re-Sn colloid and 188Re-Sn-FHMA was detected by activity measurements in urine samples, during the first 12 hr post-radiopharmaceutical injection.The percentage of activity retained in the knee was 69.1% for 188Re-Sn colloid, 55.1% for 188Re-Sn-FHMA and 33.6% for 188Re-HA. CONCLUSION: The 188Re-Sn colloid was easy to prepare, minimum facilities were required, was stable for 24 hr and showed minimal leakage from the joint after intraarticular injection into the rabbit's knee. Furthermore, 188Re-Sn colloid has greater retention in the knee when it is compared with the other radiopharmaceuticals, so it could provide the best therapeutic effect/absorbed dose ratio for the patient.

Physico-chemical characterisation and biological evaluation of 188-Rhenium colloids for radiosynovectomy.

BACKGROUND: Radiosynovectomy is a type of radiotherapy used to relieve pain and inflammation from rheumatoid arthritis. In this study, 188-Rhenium (188Re) colloids were characterized by physical and biological methodologies. This was used to assess which parameters of the kit formulation would be the basis in the development of a more effective radiopharmaceutical for synovectomy. Intraarticular injection in knees of rabbits assessed cavity leakage of activity. METHODS: The physical characteristics of tin (Sn) and sulphur (S) colloids were determined to assess the formulation with suitable properties. Particles were grouped in three ranges for analyzing their distribution according to their number, volume and surface. The ideal particle size range was considered to be from 2 to 10 microns. Membrane filtration and laser diffraction characterization methodologies were used. RESULTS: While membrane filtration could give misleading data, laser diffraction proportions more reliable results. The Sn colloid showed a better distribution of particle volume and surface than S colloid, in the 2 to 10 microns range. The 188Re-Sn colloid was obtained with a radiochemical purity higher than 95% after 30 minutes of autoclaving. While Sn colloid kit stability was verified for 60 days, the 188Re-Sn preparation was stable in the first 24 hrs. No significant intrabatch variability (n = 3) was detected. Biodistribution and scintigraphic studies in rabbits after intraarticular injection showed relevant activity only in knee, being 90% at 48 hours. CONCLUSION: The 188Re-Sn colloid is easy to prepare, is stable for 24 hours and shows minimal cavity leakage after intraarticular injection into rabbit knees, suggesting this radiotherapeutical agent has suitable physical properties for evaluation for joint treatment in humans.