Formulations of NaOCl-based in liquid, gel form or with surfactants on dentin deproteinization before fiber post cementation.

The objective of the study was to evaluate the effects of dentin deproteinization protocols for post space using different formulations containing sodium hypochlorite before fiber post cementation with self-adhesive resinous cement. The groups were divided according to the irrigation protocol (DWC, SHS, SHT and SHG). The residue cleanliness, bond strength, adhesive failure pattern, and tag formation at the adhesive interface between the self-adhesive cement and the dentin were evaluated. For this, analysis in scanning electron microscope, push-out test and confocal laser scanning microscopy were performed. The SHT protocol showed the highest residue cleanliness on the dentin surface of the post space (p<0.05). In addition, SHT protocol showed highest bond strength and tag formation in the cervical and middle thirds (p<0.05). Dentin deproteinization with sodium hypochlorite with surfactant provided the best dentin cleaning of residues, bond strength and tag formation after cementation of the fiber post with self-adhesive cement.

Effect of sodium hypochlorite-based formulations on the adhesion interface after fiber post cementation.

The study evaluated the persistence of residues, bond strength and tags formation of a cementation system after post-space irrigation with different sodium hypochlorite-based irrigants. The groups were divided according to the irrigation protocol (DW: distilled water; SHS: sodium hypochlorite solution; SHG: sodium hypochlorite gel; and, SHT: sodium hypochlorite with surfactant). Forty roots (n=10) were used to evaluate the persistence of residues by scanning electron microscopy. Other forty roots were used to the push-out bond strength test, failure mode and tag formation analyses. Non-parametric data were submitted to Kruskal Wallis and Dunn tests, while parametric data were evaluated by one-way ANOVA. No difference was observed in the persistence of residues. DW showed the highest bond strength and tag formation. Type 2 failure mode was the most frequent in the experimental groups. Compared to control, SHT showed the best performance, since less negative effects on adhesive interface was observed.

Effect of antioxidants after post-space irrigation on the adhesive interface of glass fiber post cementation.

OBJECTIVE: This study evaluated the effects of antioxidants, 10% sodium ascorbate (SA) or 20% alpha-tocopherol (AT), after post-space irrigation with 2.5% sodium hypochlorite +17% EDTA (SH) or 1% peracetic acid (PA) on the adhesive interface after glass fiber post cementation. MATERIALS AND METHODS: Sixty bovine roots were endodontically treated. After preparation, the post-space was irrigated with SH or PA followed or not by the use of antioxidants (SA or AT) (n = 10). Push-out bond strength test, failure mode, and dentin penetrability analysis using confocal laser microscope were performed in the cervical, middle, and apical thirds. Data from bond strength and dentinal penetrability were evaluated by one-way ANOVA and Tukey post hoc test (p < 0.05). RESULTS: SH showed the lowest bond strength regardless of the third (p < 0.05). In apical third, mixed failure was the most incident in all groups. Only in the cervical third of the post-space, SH-AT provided the greatest tag extension of the cementation system into dentin (p < 0.05). However, in the middle and apical thirds, SH-AT, SH-SA, and PA-SA provided the largest tag extensions (p < 0.05), but similar to each other (p > 0.05). CONCLUSIONS: The use of antioxidants only favored bond strength when SH was used and dentin penetrability of the adhesive and conventional resin cementation, regardless of the solution used to irrigate the post-space. CLINICAL SIGNIFICANCE: The use of antioxidants (10% sodium ascorbate and 20% alpha-tocopherol) after post-space irrigation with sodium hypochlorite appears to increase the bond strength favoring the glass fiber post-cementation.

Microstructural effect of different concentrations of hydrogen peroxide photoactivated with LED/laser.

BACKGROUND: The use of different concentrations of hydrogen peroxide (HP) photoactivated with LED/laser sources is common however, their influence on tooth structure is not yet fully elucidated. This study aimed to evaluate the pH, microhardness and surface roughness of different bleaching protocols photoactivated with LED/laser. METHODS: Forty bovine incisors were sectioned (7 × 7 × 2 mm) and randomized into four groups for analysis of pH (n = 5), microhardness and roughness (n = 10): HP35, HP6_L, HP15_L, HP35_L. The pH analysis was performed in the initial and final minute of the bleaching protocol. Microhardness and roughness were evaluated before and 7 days after the last bleaching session. Results were obtained from two-way ANOVA for repeated measures and Bonferroni post-test at a significance level of 5%. RESULTS: HP6_L showed higher pH and greater stability between the initial and final evaluations, while the other groups showed similar pH with reduced values in the intragroup evaluation. No differences between groups in microhardness and roughness evaluations were observed. CONCLUSIONS: Although HP6_L showed higher alkalinity and pH stability, none of the protocols reduced the microhardness and surface roughness of bovine enamel.

Effect of non-vital tooth bleaching photoactivated with blue or violet LED on color and microhardness.

BACKGROUND: To evaluate the efficacy of dental bleaching protocols using 35% hydrogen peroxide photoactivated with violet LED on color and microhardness of endodontically treated teeth. METHODS: Forty specimens were selected and randomized into 4 groups (n = 10): C - Control, HP - 35% hydrogen peroxide, HP + BL - 35% hydrogen peroxide + blue LED, HP + VL - 35% hydrogen peroxide + violet LED. Three bleaching sessions were performed for each group. Color analysis was performed 7 days after each bleaching session. Two-way repeated measure ANOVA and Bonferroni test were used to evaluate the effect of different bleaching protocols and evaluation times on the dependent variables (∆E and ∆L). Dentin microhardness was measured 24 h after the third bleaching session. Data were evaluated by ANOVA and Tukey's test at a significance level of 5%. RESULTS: Differences on ∆E and ∆L were verified after the first and second bleaching sessions (p < 0.05) and showed stability after the third one, for all the groups. No differences were observed among HP, HP + BL, and HP + VL groups, regardless of the evaluation time (p > 0.05). HP and C showed the greatest and smallest reduction in dentin microhardness (p < 0.05), respectively. No difference between HP + BL and HP + VL protocols (P > 0.05) was observed. CONCLUSIONS: High concentration hydrogen peroxide (35%) photoactivated with violet LED bleached endodontically treated teeth effectively. However, the same protocol negatively affected the dentin microhardness, but not in the same level of 35% HP solely used.

Effectiveness and color stability of non-vital dental bleaching photoactivated by violet LED on blood-stained teeth.

BACKGROUND: Few studies have investigated the effect of violet LED irradiation associated or not with bleaching agents on blood-stained teeth. This in vitro study aimed to evaluate the whitening efficacy and color stability of non-vital dental bleaching using 35% hydrogen peroxide (HP) photoactivated with violet LED (VL) compared to 35% HP alone and 35% HP photoactivated with blue LED (BL). METHODS: Fifty bovine dental crowns were used to obtain specimens of 5 × 5 × 2 mm. After selection based on a previous colorimetric analysis, the specimens were blood-stained and randomly assigned into five groups (n = 10): control (no treatment); 35% HP, 35% HP/BL; 35% HP/VL; and VL. Three bleaching sessions were performed and the colorimetric analysis (∆Eab, ∆L, and ∆WID) was recorded after 7 days, 30 days, and 9 months of the last bleaching session. Two-way repeated measures ANOVA followed by Bonferroni post-hoc test was used at a significance level of 5%. RESULTS: 35% HP, 35% HP/BL, and 35% HP/VL showed higher values of ∆Eab, ∆L, e ∆WID (P < 0.05), without intra- and intergroup differences (P > 0.05). C and VL were similar in all the evaluation times (P > 0.05), showing lower values of ∆Eab, ∆L, and ∆WID (P < 0.05). CONCLUSIONS: 35% HP/VL can be a viable alternative for dental bleaching in endodontically-treated teeth, showing bleaching efficacy similar to 35% HP solely used, even after a 9-month follow-up. VL used alone was not effective to bleach blood-stained teeth.

Influence of Bleaching Agent Containing Bioactive Glass on Color and Microhardness of Bovine Enamel

To try to reduce the deleterious effects of tooth whitening, bioactive materials have been used. Forty enamel/dentin blocks were stained on dark tea and randomly assigned into four groups (n=10): control group (unbleached), HP35 % (35 % hydrogen peroxide), BG45S5 (Bioglass 45S5® incorporated into HP35 %), and BIO (Biosilicate® incorporated into HP35 %). Colorimetric analysis and microhardness evaluation was performed at baseline, 24 hours and 7 days after the final whitening session. Two-way ANOVA for repeated measures and Bonferroni test was used at a significance level of 5 %. All the coordinates (ΔL*, Δa*, Δb*, ΔE00 and WID) showed a difference between the control group and the experimental ones (p0.05), which suggest a color stability over a week. In contrast, after 7 days, the WID showed that control and PH35 % were different than the other groups (p 0.05). The microhardness did not change over time (p>0.05), except for 35 % HP. In conclusion Bioglass 45S5® and Biosilicate® prevented enamel damage without negatively affect the whitening efficacy.

Para intentar reducir los efectos nocivos del aclaramiento dental, se han usado materiales bioactivos. Cuarenta bloques de esmalte/dentina se tiñeron con té oscuro y se asignaron al azar en cuatro grupos (n=10): grupo de control (sin blanquear), HP35% (peróxido de hidrógeno al 35 %), BG45S5 (Bioglass 45S5® incorporado en HP35%) y BIO (Biosilicato® incorporado a HP35%). El análisis colorimétrico y la evaluación de la microdureza se realizaron al inicio del estudio, 24 horas y 7 días después de la última sesión de blanqueamiento. Se utilizó ANOVA de dos vías para medidas repetidas y la prueba de Bonferroni a un nivel de significancia del 5 %. Todas las coordenadas (ΔL*, Δa*, Δb*, ΔE00 y WID) mostraron diferencia entre el grupo control y el experimental (p0.05), lo que sugiere una estabilidad del color durante una semana. En cambio, a los 7 días, el WID mostró que el control y el PH35 % eran diferentes a los demás grupos (p 0.05). La microdureza no cambió con el tiempo (p>0.05), excepto para 35 % HP. En conclusión Bioglass 45S5® y Biosilicate® previnieron el daño del esmalte sin afectar negativamente la eficacia del blanqueamiento.

Violet LED associated with high concentration hydrogen peroxide: Effects on bleaching efficacy, pH, and temperature.

BACKGROUND: This study aimed to evaluate the bleaching efficacy, pH, and temperature of 35% hydrogen peroxide (HP) gel used alone or associated with violet LED. METHODS: Sixty bovine crowns were sectioned (5 × 5 × 2mm). After staining with black tea, the specimens were randomized into four groups (n = 10) according to the bleaching protocol: HP35R: 3 × 15 min 35% HP; HP35: 1 × 45 min 35% HP; HP35VR: 3 × 8min 35% HP + Violet LED; HP35V: 1 × 24 min + Violet LED. Two bleaching sessions were performed for all the groups. Color change was evaluated before, 24h after each session, 7 days and 15 days after the last session. The variables ∆E00 [CIEDE2000] and WID were used for color analysis. The pH variation (initial and final) and the temperature of the gel were recorded (n = 5). ANOVA two-way for repeated measures and Bonferroni post-test was used at a significance level of 5%. RESULTS: HP35VR and HP35V the most noticeable color change(p < 0.05). The final values of pH were lower than the initial ones, but with no difference between the groups (p > 0.05). Groups HP35VR and HP35V showed an increase in temperature in relation to HP35R (p < 0.05). CONCLUSIONS: Violet LED improved the bleaching efficacy of 35% HP in a time-saving manner without negatively affecting the pH and temperature of 35% HP. The renewal of HP did not influence the outcomes.

Bonding effects of cleaning protocols and time-point of acid etching on dentin impregnated with endodontic sealer.

Objectives: This study aimed to investigate the bonding effects of cleaning protocols on dentin impregnated with endodontic sealer residues using ethanol (E) or xylol (X). The effects of dentin acid etching immediately (I) or 7 days (P) after cleaning were also evaluated. For bonding to dentin, universal adhesive (Scotchbond Universal; 3M ESPE) was used. The persistence of sealer residues, hybrid layer formation and microshear bond strength were the performed analysis. Materials and Methods: One hundred and twenty bovine dentin specimens were allocated into 4 groups (n = 10): G1 (E+I); G2 (X+I); G3 (E+P); and G4 (X+P). The persistence of sealer residues was evaluated by SEM. Confocal laser scanning microscopy images were taken to measure the formed hybrid layer using the Image J program. For microshear bond strength, 4 resin composite cylinders were placed over the dentin after the cleaning protocols. ANOVA followed by Tukey test and Kruskal-Wallis followed by Dunn test were used for parametric and non-parametric data, respectively (α = 5%). Results: G2 and G4 groups showed a lower persistence of residues (p < 0.05) and thicker hybrid layer than the other groups (p < 0.05). No bond strength differences among all groups were observed (p > 0.05). Conclusions: Dentin cleaning using xylol, regardless of the time-point of acid etching, provided lower persistence of residues over the surface and thicker hybrid layer. However, the bond strength of the universal adhesive system in etch-and-rinse strategy was not influenced by the cleaning protocols or time-point of acid etching.