RESUMO
In recent years, many papers describing ionic liquids (IL) as promising solvents in separation techniques have been published. The conscious choice of appropriate ionic liquid as absorption media in effective extraction of selected types of analytes requires deeper understanding of the analyte-IL interactions. Therefore, intensive research is conducted to determine the values of activity coefficient at infinite dilution, which allows us to characterize the nature of these interactions. Based on the inverse gas chromatography retention data, activity coefficients at infinite dilution γ 13 ∞ of 48 different organic compounds in the ionic liquids N-ethyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide [C2C1Mor][TFSI] and N-octyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide [C8C1Mor][TFSI] were determined. The measurements covered a broad range of volatile organic compounds, including n-alkanes, n-alkenes, n-alkynes, alcohols, aldehydes, ketones, aromatic compounds and common polar solvents, representing different types of interactions. Activity coefficients at infinite dilution were measured in the temperature range from 313.15 to 363.15 K. The excess partial molar enthalpies and entropies at infinite dilution were determined. Selectivity at infinite dilution was also calculated for exemplary separation processes in the hexane/benzene system. The obtained results were analyzed and compared with literature data for ionic liquids containing the same anion [TFSI]¯ and different cations. The study results indicate that some potential applications of the investigated ionic liquids in separation problems exist.
Assuntos
Hidrocarbonetos Fluorados/química , Imidas/química , Líquidos Iônicos/química , Modelos Químicos , Compostos Orgânicos/química , Solventes/química , Algoritmos , SoluçõesRESUMO
Due to various desirable physicochemical properties, ionic liquids (ILs) are still gaining in popularity. ILs have been recurrently considered green solvents. However, environmental, health and safety assessments of ILs have raised certain doubts about their benignness, and their greenness status is currently unclear. To clarify the situation on their greenness, we perform a comprehensive assessment of more than 300 commercially available ILs. We apply multicriteria decision analysis, the tool that allows ranking many alternatives according to relevant criteria. They are toxicity towards various organisms, biodegradability, hazard statements and precautionary measures during their handling. We incorporated organic solvents to rankings, as their greenness is better described, so they serve as greenness reference points. The ranking results obtained considering the whole set of criteria show that ILs are placed between recommended polar solvents and problematic/undesirable non polar organic solvents in terms of greenness. However, the exclusion of toxicity data due to unavailability of endpoints results in assessment of ILs as greener than most of organic solvents.
Assuntos
Exposição Ambiental/efeitos adversos , Poluentes Ambientais/toxicidade , Líquidos Iônicos/toxicidade , Solventes/toxicidade , Biodegradação Ambiental , Técnicas de Apoio para a Decisão , Poluentes Ambientais/química , Química Verde , Líquidos Iônicos/química , Solventes/químicaRESUMO
Ionic liquids with their unique properties found so far numerous analytical applications. Among them ionic liquids immobilized on the surface or within the pores of a solid support were successfully utilized in extraction techniques dedicated to preconcentration of the analytes from food, environmental and biological samples. In this review we focus on comprehensive summarizing of available literature data on the examples of ionic liquid-based hybrid materials implementation in selected analytical extraction techniques, namely solid-phase extraction, solid-phase microextraction, hollow-fiber solid-phase microextraction, stir-bar sorptive extraction and biosensors. Additionally, this work is supported by concise discussion on strategies of ionic liquids immobilization in order to form hybrid materials (both chemical and physical) and the effects of confinement on structures along with ionic liquids physicochemical properties. This work allows for identifying the opportunities, challenges and shortcomings of this powerful and convenient, yet still not fully discovered analytical approach.
Assuntos
Fenômenos Químicos , Técnicas de Química Analítica/métodos , Líquidos Iônicos/química , Microextração em Fase SólidaRESUMO
In this work, four ionic liquids (ILs) based on the N-alkyl-N-methylmorpholinium cation ([Mor1,R], in which R = 2, 4, 8, or 10) and bis(trifluoromethanesulfonyl)imide anion were synthesized. Using GLC, a number of parameters describing the sorption properties of the investigated ILs were determined. The values of Kovats indices, McReynolds constants, and activity coefficients at infinite dilution were the basis for the evaluation of intermolecular interactions. The effect of the chain length of the alkyl substituent in the cation, which was used to modify their polarity, has been discussed. Comparison of the characteristics of the investigated IL-based stationary phases with commercially available ones allowed for the statement that the investigated ILs were more polar. The tested ILs had a relatively high polarity. Increasing the length of the alkyl chain in the morpholinium ring reduced polarity. ILs based on the morpholinium cation were tunable in a wide range of their polarity.
Assuntos
Cromatografia Gasosa/métodos , Líquidos Iônicos/química , Morfolinas/química , Benzeno/química , Butanóis/química , Cátions , Cromatografia Gasosa/instrumentação , Piridinas/químicaRESUMO
Commercially available solid-phase microextraction fibers used for isolation of polar analytes are based on the adsorption phenomenon. In consequence, typical limitations bonded with analytes displacement and matrix effects are very frequent. In the present study, alternative solution is described. Polycaprolactone (PCL) was used for the first time as sorbent to isolate polar organic compounds from water samples using the membrane-solid-phase microextraction (M-SPME) technique. In this technique, due to protective role of the mechanically and thermally stable polydimethylsiloxane (PDMS) membrane, internal polar coating might be melted during extraction and desorption of analytes. In consequence sorbents with low melting points like a PCL might be utilized. Based on chromatographic retention data, triazines were selected as a model compounds for evaluation of the sorptive properties of the polycaprolactone. Applying the screening plan and central composite design, statistically significant parameters influencing extraction efficiency were determined and optimized. The analysis of variance confirmed the significant influence of temperature, salt content, and pH of samples on the extraction efficiency. Besides the new PCL/PDMS fiber, a commercial fiber coated with divinylbenzene/polydimethylsiloxane (DVB/PDMS) was used for comparative studies. The results obtained showed that PCL is an interesting sorbent which can be successfully applied for isolation of polar organics from aqueous matrices at a broad range of analytes concentration. The determined detection limits of procedure based on the novel fiber enable its application at the concentration levels of triazines recommended by the US EPA standards. The practical applicability of the developed fiber has been confirmed by the results based on the analysis of real samples.
RESUMO
In this work, hybrid silica-based materials with immobilized ionic liquids (ILs) were prepared by sol-gel technology and evaluated as solid-phase microextraction (SPME) fiber coatings. High loadings of the IL 1-methyl-3-butylimidazolium bis(trifluoromethylsulfonyl)imide ([C4MIM][TFSI]) were confined within the hybrid network. Coatings composition and morphology were evaluated using scanning electron microscopy and energy dispersive X-ray spectrometry. The obtained ionogel SPME fibers exhibited high extractability for aromatic volatile compounds, yielding good sensitivity and precision when combined with a gas chromatograph with barrier ionization discharge (GC-BID) detection. A central composite design was used for assessing the effect of experimental parameters on the extraction process. Under optimized conditions, the proposed ionogel SPME fiber coatings enabled the achievement of excellent enrichment factors (up to 7400). The limits of detection (LODs) were found in the range 0.03-1.27 µg L(-1), whereas the repeatability and fiber-to-fiber reproducibility were 5.6% and 12.0% on average, respectively. Water samples were analyzed by the proposed methodology, showing recovery values in the range of 88.7-113.9%. The results obtained in this work suggest that ionogels can be promising coating materials for future applications of SPME and related sample preparation techniques.
RESUMO
Determination of analytes at trace levels in complex samples (e.g. biological or contaminated water or soils) are often required for the environmental assessment and monitoring as well as for scientific research in the field of environmental pollution. A limited number of analytical techniques are sensitive enough for the direct determination of trace components in samples and, because of that, a preliminary step of the analyte isolation/enrichment prior to analysis is required in many cases. In this work the newest trends and innovations in liquid phase microextraction, like: single-drop microextraction (SDME), hollow fiber liquid-phase microextraction (HF-LPME), and dispersive liquid-liquid microextraction (DLLME) have been discussed, including their critical evaluation and possible application in analytical practice. The described modifications of extraction techniques deal with system miniaturization and/or automation, the use of ultrasound and physical agitation, and electrochemical methods. Particular attention was given to pro-ecological aspects therefore the possible use of novel, non-toxic extracting agents, inter alia, ionic liquids, coacervates, surfactant solutions and reverse micelles in the liquid phase microextraction techniques has been evaluated in depth. Also, new methodological solutions and the related instruments and devices for the efficient liquid phase micoextraction of analytes, which have found application at the stage of procedure prior to chromatographic determination, are presented.
Assuntos
Microextração em Fase Líquida/métodos , Soluções , SolventesRESUMO
Solid phase microextraction find increasing applications in the sample preparation step before chromatographic determination of analytes in samples with a complex composition. These techniques allow for integrating several operations, such as sample collection, extraction, analyte enrichment above the detection limit of a given measuring instrument and the isolation of analytes from sample matrix. In this work the information about novel methodological and instrumental solutions in relation to different variants of solid phase extraction techniques, solid-phase microextraction (SPME), stir bar sorptive extraction (SBSE) and magnetic solid phase extraction (MSPE) is presented, including practical applications of these techniques and a critical discussion about their advantages and disadvantages. The proposed solutions fulfill the requirements resulting from the concept of sustainable development, and specifically from the implementation of green chemistry principles in analytical laboratories. Therefore, particular attention was paid to the description of possible uses of novel, selective stationary phases in extraction techniques, inter alia, polymeric ionic liquids, carbon nanotubes, and silica- and carbon-based sorbents. The methodological solutions, together with properly matched sampling devices for collecting analytes from samples with varying matrix composition, enable us to reduce the number of errors during the sample preparation prior to chromatographic analysis as well as to limit the negative impact of this analytical step on the natural environment and the health of laboratory employees.
Assuntos
Microextração em Fase Sólida/métodosRESUMO
The results of a study on the use of membrane-solid phase microextraction (M-SPME) for sampling volatile organic compounds (VOCs) from the headspace above the liquid medium are presented. The sampled VOCs were subsequently quantified by gas chromatography (GC). Two systems were compared in this study, i.e. a novel two-phase sorption system (M-SPME), and a commercial fibre. Headspace sampling using SPME was optimized with respect to sample temperature, extraction time and the content of a salting-out agent (independently vs. each parameter). Under the optimized conditions, extraction with the M-SPME fibre yielded a limit of detection (LOD) of 0.011 µg L(-1). This value is comparable with LOD achieved with a commercial fibre under its own optimum conditions. However, using the M-SPME sample preparation procedure developed in this work, a broad linear range from 0.5 to 100 µg L(-1) was obtained, while isolation with a commercial fibre resulted in a linear range up to ca. 25 µg L(-1) only. Finally, the suitability of the novel fibre for VOC determination was proved by conducting measurements on real samples.