Locust Bean Gum/κ-Carrageenan Film Containing Blueberry or Beetroot Extracts as Intelligent Films to Monitoring Hake (Merluccius merluccius) Freshness.

The main goal of this work was to develop bio-based and ecofriendly intelligent films as freshness indicators to monitor European hake (Merluccius merluccius) quality during storage by using a visual, non-destructive, and real-time technique. Locust bean gum (LBG)/κ-carrageenan (Car) films incorporating blueberry extract (BLE) or beetroot extract (BEE) were developed and their effectiveness to detect hake deterioration during 7 days of storage at 4 °C was evaluated. A visible color response from pink to blue was observed on the BLE films at the end of hake storage, which correlated with the hake deterioration profile, namely an increase in pH values (from 6.60 ± 0.04 to 8.02 ± 0.03), total viable count (TVC, from 4.61 ± 0.36 to 8.61 ± 0.21 log CFU/g), and total volatile basic nitrogen content (TVB-N, from 10.21 ± 1.97 to 66.78 ± 4.81 mg/100 g) beyond the spoilage threshold. The results of this study are very promising, since it was possible to develop a new effective intelligent bio-based responsive indicator film incorporating natural dye BLE, which has the potential to contribute to food waste reduction and improve food safety by detecting the hake freshness status.

Strategies for the incorporation of organosolv lignin in hydroxypropyl methylcellulose-based films: A comparative study.

Organosolv lignin extracted from vine pruning residues was added to hydroxypropyl methylcellulose (HPMC)-based films using three strategies: i) lignin incorporated into the film (lignin-based film), ii) lignin nanoparticles (LNPs) incorporated into the film (LNPs-based film), and iii) lignin coated on HPMC films' surface (lignin-coated film). The films obtained were evaluated in terms of morphology, water barrier and mechanical properties, and antioxidant capacity. Results showed that LNPs incorporation did not affect the films´ water vapour permeability (WVP). Nonetheless, the lignin-based and lignin-coated films improved the water barrier properties of HPMC-based films, achieving a 31.5 and 36 % reduction of WVP, respectively. The morphological evaluation, performed by scanning electron microscopy, revealed films' morphology changes with the lignin incorporation, which was more evident in the lignin-based films. Fourier transform infrared spectroscopy (FTIR) showed minor changes in the film's structure using the different lignin incorporation methods. The mechanical properties were improved, including a significant increase in the tensile strength in the lignin-based and lignin-coated films. All films showed high radical scavenging activity (RSA) after 24 h, with a gradual increase in the lignin-coated films over time. The lignin-coated films showed to be the most promising incorporation strategy to improve the HPMC-based film's properties.

Isolation and Identification of Lichen Photobionts Collected from Different Environments in North of Portugal and Evaluation of Bioactivities of Their Extracts.

Lichens are organisms constituted by a symbiotic relationship between a fungus (mycobiont) and a photoautotrophic partner (photobiont). Lichens produce several bioactive compounds; however, the biotechnological exploitation of this organism is hampered by its slow growth. To start studying the possibility of exploiting lichens as alternative sources of bioactive compounds, eighteen lichens were collected in the north of Portugal in order to isolate and study the bioactivity of their photobionts. It was possible to isolate and cultivate only eight photobionts. Three of them, LFR1, LFA2 and LCF3, belong to the Coelastrella genus, the other two (LFA1 and LCF1) belong to the Chlorella genus and for the remaining three photobionts, LFS1, LCA1 and LCR1, it was impossible to isolate their microalgae. These only grow in consortium with bacteria and/or cyanobacteria. All extracts showed antioxidant activity, mainly at a concentration of 10 mg.mL-1. LFS1, a consortium extract, showed the highest antioxidant power, as well as the highest concentration of phenolic compounds (5.16 ± 0.53 mg of gallic acid equivalents (GAE).g-1). The extracts under study did not show significant antibacterial activity against Escherichia coli, Listeria or Salmonella. The Coelastrella sp. and LFA1 extracts showed the highest hyaluronidase inhibition. The LFR1 extract at a concentration of 5 mg.mL-1 showed the highest anti-inflammatory activity (79.77 ± 7.66%). The extracts of Coelastrella sp. and LFA1 also showed greater antidiabetic activity, demonstrating the high inhibitory power of α-amylase and α-glucosidase. LFR1 at a concentration of 5 mg.mL-1, due to its selective cytotoxicity inhibiting the growth of cancer cells (Caco-2 cells), is a promising anticancer agent.

Enhancing cannabidiol bioaccessibility using ionic liquid as emulsifier to produce nanosystems: Characterization of structures, cytotoxicity assessment, and in vitro digestion.

The emulsifying potential of a biocompatible ionic liquid (IL) to produce lipid-based nanosystems developed to enhance the bioaccessibility of cannabidiol (CBD) was investigated. The IL (cholinium oleate) was evaluated at concentrations of 1 % and 2 % to produce nanoemulsions (NE-IL) and nanostructured lipid carriers (NLC-IL) loaded with CBD. The IL concentration of 1 % demonstrated to be sufficient to produce both NE-IL and NLC-IL with excellent stability properties, entrapment efficiency superior to 99 %, and CBD retention rate of 100 % during the storage period evaluated (i.e. 28 days at 25 °C). The in vitro digestion evaluation demonstrated that the NLC-IL provided a higher stability to the CBD, while the NE-IL improved the CBD bioaccessibility, which was mainly related to the composition of the lipid matrices used to obtain each nanosystem. Finally, it was observed that the CBD cytotoxicity was reduced when the compound was entrapped into both nanosystems.

Performance of ß-carotene-loaded nanostructured lipid carriers under dynamic in vitro digestion system: Influence of the emulsifier type.

A better understanding of how emulsifier type could differently influence the behavior of nanostructured lipid carriers (NLC) under the gastrointestinal digestion process, as well as at the cellular level, is of utmost importance for the NLC-based formulations' optimization and risk assessment in the food field. In this study, NLC composed by fully hydrogenated soybean and high-oleic sunflower oils were prepared using soy lecithin (NLC Lß) or Tween 80 (NLC Tß) as an emulsifier. ß-Carotene was entrapped within NLC developed as a promising strategy to overcome ß-carotene's low bioavailability and stability. The effect of emulsifier type on the digestibility of ß-carotene-loaded NLC was evaluated using an in vitro dynamic digestion model mimicking peristalsis motion. The influence of ß-carotene-loaded NLC on cell viability was assessed using Caco-2 cells in vitro. NLC Tß remained stable in the gastric compartment, presenting particle size (PS) similar to the initial NLC (PS: 245.68 and 218.18 nm, respectively), while NLC Lß showed lower stability (PS > 1000 nm) in stomach and duodenum phases. NLC Tß also provided high ß-carotene protection and delivery capacity (i.e., ß-carotene bioaccessibility increased 10-fold). Based on the results of digestion studies, NLC Tß has shown better physical stability during the passage through the in vitro dynamic gastrointestinal system than NLC Lß. Moreover, the developed NLC did not compromise cell viability up to 25 µg/mL of ß-carotene. Thus, the NLC developed proved to be a biocompatible structure and able to incorporate and protect ß-carotene for further food applications. PRACTICAL APPLICATION: The findings of this study hold significant implications for industrial applications in terms of developing nanostructured lipid carriers from natural raw materials widely available and used to produce other lipid-based products in the food industry, as an alternative to synthetic ones. In this respect, the ß-carotene-loaded NLC developed in this study would find a great industrial application in the food industry, which is in constant search to develop functional foods capable of increasing the bioavailability of bioactive compounds.

Comparison of Different Pretreatment Processes Envisaging the Potential Use of Food Waste as Microalgae Substrate.

A significant fraction of the food produced worldwide is currently lost or wasted throughout the supply chain, squandering natural and economic resources. Food waste valorization will be an important necessity in the coming years. This work investigates the ability of food waste to serve as a viable nutritional substrate for the heterotrophic growth of Chlorella vulgaris. The impact of different pretreatments on the elemental composition and microbial contamination of seven retail food waste mixtures was evaluated. Among the pretreatment methods applied to the food waste formulations, autoclaving was able to eliminate all microbial contamination and increase the availability of reducing sugars by 30%. Ohmic heating was also able to eliminate most of the contaminations in the food wastes in shorter time periods than autoclave. However, it has reduced the availability of reducing sugars, making it less preferable for microalgae heterotrophic cultivation. The direct utilization of food waste containing essential nutrients from fruits, vegetables, dairy and bakery products, and meat on the heterotrophic growth of microalgae allowed a biomass concentration of 2.2 × 108 cells·mL-1, being the culture able to consume more than 42% of the reducing sugars present in the substrate, thus demonstrating the economic and environmental potential of these wastes.

Incorporation of curcumin-loaded solid lipid nanoparticles into yogurt: Tribo-rheological properties and dynamic in vitro digestion.

The incorporation of nanostructures loaded with bioactive compounds into food matrices is a promising approach to develop new functional foods with improved nutritional, health profiles and good sensorial properties. The rheological and tribological properties of yogurt enriched with curcumin-loaded solid lipid nanoparticles (SLN) were evaluated. Also, the TCA solubility index, the bioaccessibility of curcumin and cell viability were assessed after dynamic in vitro digestion. The presence of SLN in yogurt did not affect its rheological properties; however, SLN addition increased the lubrication capability of yogurt. After in vitro digestion, yogurt with added SLN (yogurt_SLN) presented a lower TCA solubility index (22 %) than the plain yogurt (39 %). The bioaccessibility and stability of curcumin were statistically similar for yogurt_SLN (30 % and 42 %, respectively) and SLN alone (20 % and 39 %, respectively). Regarding cell viability results, the intestinal digesta filtrates of both controls (i.e., SLN alone and plain yogurt) did not affect significantly the cell viability, while the yogurt_SLN presented a possible cytotoxic effect at the concentrations tested. In general, the incorporation of SLN into yogurt seemed to promote the mouthfeel of the yogurt and did not adversely affect the bioaccessibility of curcumin. However, the interaction of SLN and yogurt matrix seemed to have a cytotoxic effect after in vitro digestion, which should be further investigated. Despite that, SLN has a high potential to be used as nanostructure in a functional food as a strategy to increase the bioactive compounds' bioaccessibility.

Chitosan Coating Functionalized with Flaxseed Oil and Green Tea Extract as a Bio-Based Solution for Beef Preservation.

Ecological and safe packaging solutions arise as pivotal points in the development of an integrated system for sustainable meat production. The aim of this study was to assess the effect of a combined chitosan (Ch) + green tea extract (GTE) + essential oil (thyme oil, TO; flaxseed oil, FO; or oregano oil, OO) coating on the safety and quality of vacuum-packaged beef during storage at 4 °C. An optimized bio-based coating formulation was selected (2% Ch + 2% GTE + 0.1% FO) to be applied to three fresh beef cuts (shoulder, Sh; knuckle, Kn; Striploin, St) based on its pH (5.8 ± 0.1), contact angle (22.3 ± 0.4°) and rheological parameters (viscosity = 0.05 Pa.s at shear rate > 20 s-1). Shelf-life analysis showed that the Ch-GTE-FO coating delayed lipid oxidation and reduced total viable counts (TVC) and Enterobacteriaceae growth compared with uncoated beef samples over five days. In addition, Ch-GTE-FO coating decreased total color changes of beef samples (e.g., ∆E* = 9.84 and 3.94, for non-coated and coated Kn samples, respectively) for up to five days. The original textural parameters (hardness, adhesiveness and springiness) of beef cuts were maintained during storage when Ch-GTE-FO coating was applied. Based on the physicochemical and microbial characterization results, the combination of the Ch-GTE-FO coating developed was effective in preserving the quality of fresh beef cuts during refrigerated storage along with vacuum packaging.

Modulation of Designed Gut Bacterial Communities by Prebiotics and the Impact of Their Metabolites on Intestinal Cells.

The impact of prebiotics on human health is associated with their capacity to modulate microbiota, improving beneficial microbiota-host interactions. Herein, the prebiotic potential of microbial-fructo-oligosaccharides (microbial-FOSs) produced by a co-culture of Aspergillus ibericus plus Saccharomyces cerevisiae was evaluated on seven- and nine-strain bacterial consortia (7SC and 9SC, respectively), designed to represent the human gut microbiota. The 7SC was composed of Bacteroides dorei, Bacteroides vulgatus, Bifidobacterium adolescentis, Bifidobacterium longum, Escherichia coli, Lactobacillus acidophilus, and Lactobacillus rhamnosus. The 9SC also comprised the aforementioned bacteria, with the addition of Bacteroides thetaiotaomicron and Roseburia faecis. The effect of microbial-FOSs on the metabolic activity of intestinal Caco-2/HT29-MTX-E12 co-culture was also assessed. The results showed that microbial-FOS selectively promoted the growth of probiotic bacteria and completely suppressed the growth of E. coli. The microbial-FOSs promoted the highest production rates of lactate and total short-chain fatty acids (SCFA) as compared to the commercial prebiotic Frutalose® OFP. Butyrate was only produced in the 9SC consortium, which included the R. faecis-a butyrate-producing bacteria. The inclusion of this bacteria plus another Bacteroides in the 9SC promoted a greater metabolic activity in the Caco-2/HT29-MTX-E12 co-culture. The microbial-FOSs showed potential as promising prebiotics as they selectively promote the growth of probiotic bacteria, producing high concentrations of SCFA, and stimulating the metabolic activity of gut cells.

Valorization of Amaranth (Amaranthus cruentus) Grain Extracts for the Development of Alginate-Based Active Films.

This research work investigates the development of alginate-based films incorporating phenolic compounds extracted from Amaranthus cruentus grain using different solvents. Alginate, glycerol, and amaranth grain phenolic compounds at various concentrations were used to produce the films. An experimental Central Composite Rotatable Design (CCRD) was used to evaluate the effect of these variables on different film's properties, i.e., water vapor permeability, hydrophobicity, moisture content, solubility, thermal, mechanical, and optical properties. This study demonstrated that high phenolic compound content and antioxidant capacity were obtained from amaranth grain using ethanol as the extraction solvent. Alginate films incorporating amaranth phenolic compounds were successfully manufactured, and this study can be used to tailor the formulation of alginate films containing amaranth phenolic compounds, depending on their final food application. For example, less flexible but more resistant and water-soluble films can be produced by increasing the alginate concentration, which was confirmed by a Principal Component Analysis (PCA) and Partial Least Squares (PLS) analysis. This study showed that active alginate films with amaranth phenolic compounds can be tailored to be used as food packaging material with potential antioxidant activity.

Lipid-based nanostructures as a strategy to enhance curcumin bioaccessibility: Behavior under digestion and cytotoxicity assessment.

The aim of this study was to evaluate the behavior of different lipid-based nanostructures during in vitro digestion, in particular on curcumin's bioaccessibility, and to access their potential toxicity. Solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC) and nanoemulsions (NE) were submitted to harmonized static in vitro digestion and their cytotoxicity and cellular transport were evaluated using Caco-2 cell line. NE presented the highest curcumin's bioaccessibility followed by NLC and SLN, 71.1%, 63.7% and 53.3%, respectively. Free fatty acids percentage increased in the following order: NLC ≤ NE < SLN. Non-digested nanostructures and excipients presented no cytotoxicity; however, digested NE and NLC presented cytotoxicity due to MCT oil, which presented cytotoxicity after digestion. The apparent permeability coefficient of NLC was higher than SLN and NE. These results showed that lipid-based nanostructures' physical state and composition have a high influence on particles' behavior during digestion, and on their cytotoxicity/intestinal permeability, and highlights the importance of conducting cytotoxicity assessments after in vitro digestion. This work contributes to a better understanding of the behavior of lipid-based nanostructures under digestion/adsorption, and this knowledge will be useful in design of nanostructures that afford both safety and an increased bioactive compounds' bioavailability.

Nanoemulsions for Enhancement of Curcumin Bioavailability and Their Safety Evaluation: Effect of Emulsifier Type.

This work aimed at evaluating the effects of different emulsifiers on curcumin-loaded nanoemulsions' behavior during digestion, its safety and absorption, to develop nanoemulsions that provide safety and improved curcumin functionality. Nanoemulsions (NEs) were produced using two bio-based (lecithin (LEC) and rhamnolipids (RHAM)) and one synthetic (Tween®80 (TWE)) emulsifier at similar concentrations. Different NEs were subjected to in vitro digestion. The cytotoxicity and permeability tests were performed in Caco-2 cells. NE_TWE were stable during all phases of in vitro digestion, whereas NE_LEC and NE_RHAM were found to be unstable from the gastric phase. NE_TWE showed 100% of free fatty acids released, followed by NE_RHAM and NE_LEC. Curcumin's bioaccessibility and stability increased in the following order: NE_LEC > NE_RHAM > NE_TWE. NE_LEC and NE_TWE did not show cytotoxic effects in any of the concentrations tested, while NE_RHAM presented high cytotoxicity in all concentrations tested. The apparent permeability coefficients were determined for NE_LEC and NE_TWE; however, the results were not statistically different. These results showed that the emulsifier used has a high impact on nanoemulsions' behavior under the digestion process and on their cytotoxicity. This work contributed to the state-of-the-art's progress on the development of safer curcumin delivery systems with improved functionality, particularly regarding the proper selection of ingredients to produce said systems.

Curcumin encapsulation in nanostructures for cancer therapy: A 10-year overview.

Curcumin (CUR) is a phenolic compound present in some herbs, including Curcuma longa Linn. (turmeric rhizome), with a high bioactive capacity and characteristic yellow color. It is mainly used as a spice, although it has been found that CUR has interesting pharmaceutical properties, acting as a natural antioxidant, anti-inflammatory, antimicrobial, and antitumoral agent. Nonetheless, CUR is a hydrophobic compound with low water solubility, poor chemical stability, and fast metabolism, limiting its use as a pharmacological compound. Smart drug delivery systems (DDS) have been used to overcome its low bioavailability and improve its stability. The current work overviews the literature from the past 10 years on the encapsulation of CUR in nanostructured systems, such as micelles, liposomes, niosomes, nanoemulsions, hydrogels, and nanocomplexes, emphasizing its use and ability in cancer therapy. The studies highlighted in this review have shown that these nanoformulations achieved higher solubility, improved tumor cytotoxicity, prolonged CUR release, and reduced side effects, among other interesting advantages.

ß-lactoglobulin micro- and nanostructures as bioactive compounds vehicle: In vitro studies.

ß-Lactoglobulin (ß-Lg) is known to be capable to bind hydrophilic and hydrophobic bioactive compounds. This research aimed to assess the in vitro performance of ß-Lg micro- (diameter ranging from 200 to 300 nm) and nano (diameter < 100 nm) structures associated to hydrophilic and hydrophobic model compounds on Caco-2 cells and under simulated gastrointestinal (GI) conditions. Riboflavin and quercetin were studied as hydrophilic and hydrophobic model compounds, respectively. Cytotoxicity experiment was conducted using in vitro cellular model based on human colon carcinoma Caco-2 cells. Moreover, the digestion process was simulated using the harmonized INFOGEST in vitro digestion model, where samples were taken at each phase of digestion process - oral, gastric and intestinal - and characterized in terms of particle size, polydispersity index (PDI), surface charge by dynamic light scattering (DLS); protein hydrolysis degree by 2,4,6-trinitrobenzene sulfonic acid (TNBSA) assay and native polyacrylamide gel electrophoresis; and bioactive compound concentration. Caco-2 cell viability was not affected up to 21 × 10-3 mg mL-1 of riboflavin and 16 × 10-3 mg mL-1 quercetin on ß-Lg micro- and nanostructures. In the oral phase, ß-Lg structures' particle size, PDI and surface charge values were not changed comparing to the initial ß-Lg structures (i.e., before being subjected to in vitro GI digestion). During gastric digestion, ß-Lg structures were resistant to proteolytic enzymes and to acid environment of the stomach - confirmed by TNBSA and native gel electrophoresis. In vitro digestion results indicated that ß-Lg micro- and nanostructures protected both hydrophilic and hydrophobic compounds from gastric conditions and deliver them to target site (i.e., intestinal phase). In addition, ß-Lg structures were capable to enhance riboflavin and quercetin bioaccessibility and bioavailability potential compared to bioactive compounds in their free form. This study indicated that ß-Lg micro- and nanostructures were capable to enhance hydrophilic and hydrophobic compounds bioavailability potential and they can be used as oral delivery systems.

Lactoferrin-based nanoemulsions to improve the physical and chemical stability of omega-3 fatty acids.

Omega-3 (ω-3) polyunsaturated fatty acids are highly susceptible to oxidation and have an intense odour and poor water solubility, which make their direct applications in foods extremely difficult. In order to reduce their oxidation process and improve their stability in aqueous medium, protein-based nanoemulsions were produced and characterized. Lactoferrin (Lf) was used as an emulsifier at different concentrations (0.2% to 4% w/w). High energy methods (Ultra-Turrax and high-pressure homogenizer) were applied to produce Lf-based nanoemulsions with ω-3 PUFAs encapsulated. The nanoemulsions were characterized in terms of physical and chemical stability at 4 and 25 °C. The results obtained revealed that the Lf concentration influences the nanoemulsion size in a manner that higher Lf concentrations decrease the nanoemulsion size. It was also observed that the nanoemulsions are physically stable when stored at 4 °C for 69 days while at 25 °C they showed instability. The radical scavenging capacity of the nanoemulsions did not show significant changes over storage at 4 and 25 °C while a significant increase in oxidation was observed. The release profile at 37 °C showed that ω-3 PUFAs were slowly released at pH 2 but was rapidly released at pH 7.4 from Lf nanoemulsions. Moreover, MTT assay revealed that 2% (w/w) Lf nanoemulsions with 12.5 µg mL-1ω-3 PUFAs were not cytotoxic to Caco-2 cells. Nanoemulsions with high physical and chemical stability were selected and dried by two different methodologies: freeze-drying and nano spray-drying. ATR-FTIR spectroscopy, Raman spectroscopy and Circular Dichroism (CD) showed Lf structural changes after the drying processes. This work provides important information regarding nanoemulsions' design and drying technologies aiming at the encapsulation of lipophilic compounds for pharmaceutical and food applications.

Emerging opportunities in exploring the nutritional/functional value of amaranth.

Amaranthus spp. is a highly nutritive pseudocereal, rich in macronutrients and micronutrients, including vitamins and minerals. Amaranth grain is rich in essential amino acids, particularly lysine, with high nutritional quality. In addition, recent research studies demonstrate that Amaranthus spp. essential nutrients, such as phytochemicals, have potential beneficial health effects. This review focuses on the amaranth grain's nutritional composition and antioxidant capacity. Also, limitations on its intake and strategies to improve its digestibility, bioaccessibility and bioavailability are summarized in this review. Finally, the most recent literature studies reporting food applications of amaranth (e.g., as encapsulating material) are discussed in order to deepen the understanding of potential health benefits and functionalities of this nutritious grain.

Electric Field Processing: Novel Perspectives on Allergenicity of Milk Proteins.

Milk proteins are being widely used in formulated foods as a result of their excellent technological, functional, and biological properties. However, the most representative proteins from casein and whey fractions are also recognized as major allergens and responsible for the prevalence of cow's milk protein allergy in childhood. Electroheating technologies based on thermal processing of food as a result of application of moderate electric fields, also known by ohmic heating (OH) or Joule effect, are establishing a solid foothold in the food industry. Currently, the influence of OH on allergenic aspects of milk proteins is under debate but still undisclosed. The occurrence of electrical effects on the protein structure and its function has already been reported; thus, the impact of OH over allergenicity should not be overlooked. On the basis of these recent findings, it is then relevant to speculate about the impact of this emergent technology on the potential allergenicity of milk proteins.

Lactoferrin-based nanoparticles as a vehicle for iron in food applications - Development and release profile.

This study aims at developing and characterizing bovine lactoferrin (bLf) nanoparticles as an iron carrier. bLf nanoparticles were characterized in terms of size, polydispersity index (PdI), electric charge (ζ-potential), morphology, structure and stability over time. Subsequently, iron release experiments were performed at different pH values (2.0 and 7.0) at 37°C, in order to understand the release mechanism. bLf (0.2%, w/v) nanoparticles were successfully produced by thermal gelation (75°C for 20min). bLf nanoparticles with 35mM FeCl3 showed an iron binding efficiency value of approximately 20%. The nanoparticles were stable (i.e. no significant variation of size and PdI of the nanoparticles) for 76days at 4°C and showed to be stable between 4 and 60°C and pH2 and 11. Release experiments at pH2 showed that iron release could be described by the linear superposition model (explained by Fick and relaxation phenomenon). On the contrary, the release mechanism at pH7 cannot be described by either Fick or polymer relaxation behaviour. In general, results suggested that bLf nanoparticles could be used as an iron delivery system for future food applications.

Antioxidant potential of two red seaweeds from the Brazilian coasts.

In this work, in vitro antioxidant activity of two Brazilian red seaweeds, Gracilaria birdiae and Gracilaria cornea, was characterized. The total phenolic content, the radical-scavenging activity and the antioxidant activity were determined in two solvent extracts of the algae. Liquid chromatography-mass spectrometry (LC-MS/MS) allowed identification of important antioxidant compounds. The ethanol extract of G. birdiae was found to have the highest value of total phenolic content: 1.13 mg of gallic acid equiv (GAE)/g of extract. The radical-scavenging activity of G. birdiae and G. cornea extracts has been evaluated at different extract concentrations; the IC(50) values of ethanolic extracts of G. cornea and G. birdiae were 0.77 and 0.76 mg mL(-1), respectively, while for methanolic extracts, the IC(50) values of G. cornea and G. birdiae were 0.86 and 0.76 mg mL(-1), respectively. The antioxidant activities of these two seaweeds' extracts as assessed by the ß-carotene-linoleic acid assay were equally high, achieving values of ß-carotene oxidation inhibition of up to 40%. Finally, in the methanolic extracts, LC-MS/MS allowed identification in both algae of two important antioxidants: apigenin and gallic acid.

Effect of chitosan-based coatings on the shelf life of salmon (Salmo salar).

This study aimed at determining the effect of chitosan coating on shelf life extension of salmon ( Salmo salar ) fillets. The success of edible coatings depends highly on their effective wetting capacity of the surfaces on which they are applied. In this context in a first stage the surface properties of salmon fillets and the wetting capacity of the coatings on fish were evaluated. In terms of wettability there were no significant differences (p > 0.05) between the solutions presenting higher values (solutions 1-4); therefore, solution 1 with a spreading coefficient (Ws) of -4.73 mN m(-1), was chosen to be subsequently analyzed and applied on fish fillets. For shelf life analyses the fillets were coated and stored at 0 °C for 18 days. The control and coated fish samples were analyzed periodically for total aerobic plate count (TPC), pH, total volatile base nitrogen (TVB-N), trimethylamine (TMA), thiobarbituric acid (TBA), and ATP breakdown products (K value). The results showed that fish samples coated with chitosan presented a significant reduction (p < 0.05) for pH and K value after 6 days and for TVB, TMA, and TBA values after 9 days of storage, when compared to control samples. In terms of microbial growth, a slower increase in TPC was observed for the coated fish, indicating that chitosan-based coatings were effective in extending for an additional 3 days the shelf life of the salmon. These results demonstrate that chitosan-based coatings may be an alternative for extending the shelf life of salmon fillets during storage at 0 °C.