RESUMO
Fast and sensitive quantification of drugs as emerging pollutants in water bodies is a pressing need in contemporary society, to prevent serious environmental concerns that could negatively impact on human health. This explains the surge of interest in this field, and the need to identify highly selective sensing systems. Addressing this issue, in this work we synthesized two D-glucamine functionalized fluorophores bearing self-assembling cores, as 1,8-naphthalimide and naphthalene diimide. We studied their self-assembly in water solution, and characterized the aggregated formed by determining their stability constant, their morphology and size by scanning electron microscopy, resonance light scattering and dynamic light scattering, as well their solid-state emission ability. Then, we studied their sensing ability, in water, towards pharmaceutically active compounds such as ciprofloxacin, nalidixic acid, carbamazepine and diclofenac sodium salt, by fluorescence investigation. Data collected show that the self-assembling ability is significantly affected by the fluorophore structure, which in turn also determines sensing ability. In particular, the naphtalene diimide-based probe was the most sensitive, with LOD as low as 0.01 mM in the presence of nalidixic acid, which is in line and competitive with more complex sensing systems, recently reported in the literature.
RESUMO
The occurrence of emerging pollutants in water bodies is a pressing issue of modern society and identifying materials to remove them is the main target of current research. In this work, we prepared and characterized supramolecular gels of 1,3:2,4-dibenzylidene-d-sorbitol (DBS) in ionic liquids differing for the anion and the aliphatic or aromatic nature of the cation. We characterized our gels for their thermal stability and mechanical properties. We also found that all gels self-heal in 24 h after being cut by a razor blade. We then used our gels as sorbents to remove bisphenol A, an endocrine disruptor compound, from aqueous solutions. All gels adsorb BPA with high removal efficiencies, and those obtained in aliphatic ionic liquids act faster than their aromatic counterparts. The highest observed adsorption capacity was 314 mg/g. Gels were reused without loss in performance and need for intermediate washing, and the gel obtained in [bmpip][NTf2] could be reused 37 times, maintaining a removal efficiency higher than 96%. It was loaded in a sequential system of syringes to treat flowing aqueous phases, removing 60% of BPA in 30 min. We also embedded the gel in the dialysis membrane and observed a removal efficiency of 85% after 48 h.
RESUMO
With the aim to investigate new strategies for upcycling of plastic waste, we performed aminolysis of poly(lactic acid) (PLA), using N,N-dimethylethylenediamine (DMEDA), N,N-dimethylpropylenediamine (DMPDA), and 3-aminopropylimidazole (API) as nucleophiles. The N-substituted lactamides obtained were alkylated by using alkyl halides differing in alkyl chain length, obtaining organic salts that in most cases behaved as ionic liquids (ILs). Both aminolysis of PLA and alkylation of amides were carried out taking into consideration the basic principles of the holistic approach to green chemistry, applied at a laboratory scale, and carefully selecting the nature of the reaction solvent, temperature range, and amount of reagents. Organic salts obtained from the alkylation of N-substituted lactamides were investigated to determine their glass or solid-liquid transitions and their thermal stability. Furthermore, cytotoxicity toward normal lung fibroblasts was also assessed. Data collected show that the proposed strategy represents a valuable protocol to upcycle plastic waste, using it as starting material to obtain alternative solvents of potential industrial relevance.
RESUMO
With the aim to obtain targeted chemotherapeutic agents, imidazolium and ammonium-based folate salts were synthesized. Their photophysical behavior was investigated both in buffer and buffer/DMSO solution as well as in solid phase, performing UV-vis and fluorescence investigations. Properties of the aggregates were also analyzed by dynamic light scattering. Gelation ability of the salts was analyzed in biocompatible solvents, and gel phases obtained were characterized by determining critical gelation concentrations and gel-solution transition temperatures. Insights about gelator interactions in the tridimensional network were also gained performing ATR-FTIR investigation. Properties of soft materials were further analyzed performing rheology measurements, scanning electron microscopy, fluorescence and resonance light scattering investigations. Antiproliferative activity of organic salts was tested towards two breast cancer cell lines, expressing different levels of folate receptor, namely MDA-MB-231 and MCF-7, and a normal epithelial cell line, like h-TER T-RPE-1, by using MTT assay. Dichlodihydrofluorescein acetate test was performed to verify the role of oxidative stress in cell death. Finally, antiproliferative activity was also evaluated in gel phase, to verify if salts were able to retain biological activity also after the entrapment in the gelatinous network. Results collected evidence that folate based organic salts were able to behave as targeted chemotherapeutic agents both in solution and gel phase, showing uptake mechanism and selectivity indexes that depend on both cancer cell line nature and salt structure.
Assuntos
Antineoplásicos , Sais , Sais/química , Antineoplásicos/farmacologia , Antineoplásicos/química , Solventes/química , Linhagem Celular , Géis/químicaRESUMO
In the context of sustainable and circular economy, the recovery of biowaste for sustainable biocomposites formulation is a challenging issue. The aim of this work is to give a new life to agricultural carob waste after glucose extraction carried out by a local factory for carob candy production. A pyrolysis process was carried out on bio-waste to produce biofuel and, later, the solid residual fraction of pyrolysis process was used as interesting filler for biocomposites production. In this work, biochar particles (BC) as a pyrolysis product, after fuels recovery of organic biowaste, specifically, pyrolyzed carobs after glucose extraction, were added on poly(butylene-adipate-co-terephthalate), (PBAT), at two different concentrations, i.e., 10 and 20 wt%. The BC have been produced using three pyrolysis processing temperatures (i.e., 280, 340 and 400 °C) to optimize the compositions of produced solid fractions and biofuels. The resulting particles from the pyrolysis process (BC280, BC340 and BC400) were considered as suitable fillers for PBAT. Firstly, the BC particles properties were characterized by elemental composition and spectroscopy analysis, particle size measurements and evaluation of radical scavenging activity and efficiency. Moreover, PBAT/BC composites were subjected to analysis of their rheological and thermal behavior, morphologies and mechanical properties. In addition, accelerated weathering, monitored by both tensile test and spectroscopic analysis, was carried out, and obtained results show that the biochar particles can exert a beneficial effect on photo-oxidation delay of PBAT matrix.
RESUMO
Obtaining industrially relevant products from abundant, cheap, renewable, and low-impacting sources such as lignocellulosic biomass, is a key step in reducing consumption of raw fossil materials and, consequently, the environmental footprint of such processes. In this regard, a molecule that is similar to 5-hydroxymethylfurfural (5-HMF) plays a pivotal role, since it can be produced from lignocellulosic biomass and gives synthetic access to a broad range of industrially important products and polymers. Recently, ionic liquids (ILs) have emerged as suitable solvents for the conversion of biomass and carbohydrates into 5-HMF. Herein, we provide a bird's-eye view on recent achievements about the use of ILs for the obtainment of 5-HMF, covering works that were published over the last five years. In particular, we first examine reactions involving homogeneous catalysis as well as task-specific ionic liquids. Then, an overview of the literature addressing the use of heterogeneous catalysts, including enzymes, is presented. Whenever possible, the role of ILs and catalysts driving the formation of 5-HMF is discussed, also comparing with the same reactions that are performed in conventional solvents.
Assuntos
Líquidos Iônicos , Carboidratos , Catálise , Furaldeído/análogos & derivados , Hexoses , SolventesRESUMO
Ionic liquids (ILs) are a class of non-conventional solvents, which, for almost two decades, have continued to generate burgeoning interest in different fields of present-day chemical research with few similar precedents. Among the various aspects related to ILs, a topic worthy of in-depth analysis is their influence on organic reactivity and reaction rates. In light of this, the present short review aims to provide an overview of the literature from 2010 to the present day that addresses this issue. In particular, we herein present two main different viewpoints by which the solvent effect of ILs is explained: the first is mainly based on considering the bulk polarity of ILs and linear solvation energy relationships, while the other treats ILs as nanostructured fluids. In both cases, studies dealing with IL mixtures are also covered. Finally, literature addressing the area of supramolecular catalysis "by" or "in" ILs is also reported. This is one of the few reviews covering these specific aspects, aiming to provide a useful framework to guide future research into the effects of ILs on organic reactivity.
RESUMO
The study of suitable probe reactions is a powerful tool to investigate the properties of nonconventional solvents such ionic liquids (ILs). In particular, we studied the acid-catalyzed mononuclear rearrangement of heterocycles (MHR) of the Z-phenylhydrazone of 5-amino-3-benzoyl-1,2,4-oxadiazole into the relevant 1,2,3-triazole, in solution of ILs by means of kinetic measurements. We chose as solvents six ILs differing both in the cation and anion, in the presence of five carboxylic and sulfonic acids as catalysts. For a useful comparison, the reaction was also performed in 1,4-dioxane and methanol. In general, the reaction occurs faster in ILs, compared to conventional solvents, according to the weaker solvation interactions operating in the former media. The effect of IL anion and cation on the reactivity and on the acidic strength of the catalysts was analyzed. To this aim, we measured the acidic strength of the sulfonic acids in each IL, estimated by the equilibrium formation constant of each acid with 4-nitroaniline. We found that the trend of reactivity as a function of the IL anion mainly reflects the larger difference in acidic strengths of the catalyst. Conversely, acidic strength spans a narrower range as a function of the IL cation. As a result, other factors come into play, such as the π-π interactions involving aromatic IL cations, substrate, and transition states, leading to a more articulate trend.
RESUMO
1,8-Naphthalimide-based imidazolium salts differing for the alkyl chain length and the nature of the anion were synthesized and characterized to obtain fluorescent probes for bioimaging applications. First, their self-assembly behavior and gelling ability were investigated in water and water/dimethyl sulfoxide binary mixtures. Only salts having longer alkyl chains were able to give supramolecular hydrogels, whose properties were investigated by using a combined approach of fluorescence, resonance light scattering, and rheology measurements. Morphological information was obtained by scanning electron microscopy. In addition, conductive properties of organic salts in solution and gel state were analyzed. Imidazolium salts were successfully tested for their possible application as bioimaging and cytotoxic agents toward three cancer cell lines and a nontumoral epithelial cell line. Characterization of their behavior was performed by MTT and cell-based assays. Finally, the biological activity of hydrogels was also investigated. Collectively, our findings showed that naphthalimide-based imidazolium salts are promising theranostic agents and they were able to preserve their biological properties also in the gel phase.
Assuntos
Corantes Fluorescentes/química , Hidrogéis/química , Imidazóis/química , Naftalimidas/química , Imagem Óptica , Nanomedicina Teranóstica , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Corantes Fluorescentes/síntese química , Corantes Fluorescentes/farmacologia , Humanos , Hidrogéis/síntese química , Hidrogéis/farmacologia , Imidazóis/farmacologia , Substâncias Macromoleculares/síntese química , Substâncias Macromoleculares/química , Substâncias Macromoleculares/farmacologia , Estrutura Molecular , Naftalimidas/farmacologia , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Current concerns for sustainability and the environment make low-impact materials desirable for environmental remediation and, in particular wastewater treatment. We obtained supramolecular gels of l-amino acids in the deep eutectic solvent formed by choline chloride and phenylacetic acid. After gel characterization, and investigating gel-sol transition temperatures, gelation kinetics, rheological properties, and morphology, the gels were applied as sorbents to remove cationic dyes from aqueous solutions. The effects of the pH, dye nature, volume, and concentration of wastewater were analyzed, and the best result was obtained with a l-phenylalanine-based eutectogel. It can be reused for at least 9 times without losing efficiency, also with dye mixtures. Interestingly, this gel can be loaded onto columns to decolorize flowing solutions, achieving 85 % of removal efficiency in only 10 minutes and allowing its reuse for at least 4 cycles. In terms of adsorption capacity, this eutectogel is competitive with efficient gel-based dye sorbent systems, with a value 1930â mg/g reached at a high concentration of rhodamine B 479â mg/L.
RESUMO
The work aim is focused on two different aspects: first, the investigation of the effect of extended ultra-sound-assisted treatment (us) of carbonaceous nanoparticles, such as carbon nanotubes (CNTs) and carbon black (CB), on their radical scavenging activity, and second, the investigation of the oxidative resistance of polymer-based nanocomposites, containing us-treated CNTs and CB. Particularly, the CNTs and CB have been subjected to us sonication for different time intervals and the performed analysis reveals that both kinds of nanoparticles show decreased average hydrodynamic diameters and large content of surface defects. Really, the increased content of CNTs and CB defects, achieved during the sonication time, leads to an increased reactivity toward 1,1-diphenyl-2-pycryl (DPPH) radicals and an enhanced anti-oxidant activity toward macro-radicals, coming from the photo-degradation of the host polymer matrix. The studies of photo-oxidative behavior of the nanocomposites, based on Ultra High Molecular Weight (UHMWPE), reveal that the us treatment of the nanoparticles has a benefic effect on the oxidative resistance of the nanocomposites, especially at long exposure times. Overall, the ultra-sound-assisted treatment can be considered twofold powerful tool: (i) for disruption of the nanoparticles aggregations, and (ii) for capitalization of surface defects, amplifying and tuning in a controlled way the radical scavenging activity of the carbonaceous nanoparticles.
RESUMO
HYPOTHESIS: Performances of materials are frequently affected by the action of radicals that can induce their degradation. To overcome the above issue, natural antioxidants (AOs) can be added during manufacturing. Considering the high instability of AOs, they have been adsorbed on carbon nanomaterials surface. However, the inclusion of functionalized carbon nanomaterials into gel matrix could enhance the antioxidant efficiency and represent an easy way to disperse and handle the active species. EXPERIMENTS: Carboxypropyl functionalized carbon nanotubes (f-CNT), pure or with physically adsorbed α-tocopherol (f-CNT-VE) and quercetin (f-CNT-Q), were incorporated in some ionic liquid gels (ILGs) formed by 1,3-didodecylimidazolium-based salts. Temperature of gel-sol transition, morphology, response to external stimuli and rheology of hybrid ILGs (HILGs) were investigated before their use as radical scavengers. To this purpose a free radical test was performed on gels. FINDINGS: The properties of HILGs significantly differ from the ones of pure ILGs, as CNTs appreciably improved gel rheological response. Besides, the gel network is able to enhance radical scavenging activity of both natural AOs and f-CNTs, achieving a complete radical reduction in less than 1â¯h. Furthermore, the activity is also preserved in thin films obtained from HILGs, opening the way to the application of these systems as material coatings.
RESUMO
Due to large drug consumption, pharmaceutically active compounds (PhACs) can be found as water contaminants. The removal of PhACs is a significant issue, as they can easily overtake traditional purification methods. Because of their surface properties, carbon nanomaterials are among the most efficient materials able to adsorb PhACs. However, their limitation is their recovery after use and their possible leakage into the aquatic system. Consequently, new hybrid supramolecular ionic liquid gels (HILGs) have been designed for the adsorption of some antibiotic drugs (ciprofloxacin and nalidixic acid) from water. The chemical-physical properties of gels, such as the temperature of the gel-sol transition, morphology, and rheology, have been studied for their use as sorbents. These properties influence the gel removal efficiency of PhAC, i.e., the best system is the gel that presents weaker colloidal forces. A fast removal (RE = 51%) is obtained in 3 h for ciprofloxacin, while a slower adsorption process is observed for nalidixic acid (RE = 88% in 24 h). HILGs can be recycled up to seven cycles and regenerated. In addition, they can be used with higher concentrations or volumes of PhAC and in a realistic apparatus like dialysis membranes. These peculiarities suggest that HILGs can be competitive with more complex sorbent systems.
Assuntos
Biodegradação Ambiental , Carbono/química , Purificação da Água/métodos , Água/química , Adsorção , Géis/química , Humanos , Líquidos Iônicos/química , Nanoestruturas/química , Eliminação de Resíduos Líquidos , Poluentes Químicos da Água/química , Poluentes Químicos da Água/toxicidadeRESUMO
A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.
RESUMO
Linear regression is widely used in applied sciences and, in particular, in satellite optical oceanography, to relate dependent to independent variables. It is often adopted to establish empirical algorithms based on a finite set of measurements, which are later applied to observations on a larger scale from platforms such as autonomous profiling floats equipped with optical instruments (e.g., Biogeochemical Argo floats; BGC-Argo floats) and satellite ocean colour sensors (e.g., SeaWiFS, VIIRS, OLCI). However, different methods can be applied to a given pair of variables to determine the coefficients of the linear equation fitting the data, which are therefore not unique. In this work, we quantify the impact of the choice of "regression method" (i.e., either type-I or type-II) to derive bio-optical relationships, both from theoretical perspectives and by using specific examples. We have applied usual regression methods to an in situ data set of particulate organic carbon (POC), total chlorophyll-a (TChla), optical particulate backscattering coefficient (bbp), and 19 years of monthly TChla and bbp ocean colour data. Results of the regression analysis have been used to calculate phytoplankton carbon biomass (Cphyto) and POC from: i) BGC-Argo float observations; ii) oceanographic cruises, and iii) satellite data. These applications enable highlighting the differences in Cphyto and POC estimates relative to the choice of the method. An analysis of the statistical properties of the dataset and a detailed description of the hypothesis of the work drive the selection of the linear regression method.
RESUMO
The increase in energy demand and depletion of fossil fuels are among major issues of modern society. Valorization and transformation of raw materials in products of industrial value represent a challenge. This justifies the growing interest of scientific research toward the identification of suitable media and methodologies able to pursue above goals, paying attention to matter of sustainability. On this subject, we studied sulfonic-acid functionalized diimidazolium salts as catalysts for the conversion of fructose and sucrose to 5-hydroxymethylfurfural (5-HMF) in an ionic liquid mixture. In general, using these salts allowed us to obtain 5-HMF in good yields from both substrates in mild conditions. Indeed, at 60°C and in the presence of 20 mol% of catalyst, 5-HMF yields of 60 and 30% were obtained from fructose and sucrose, respectively. The catalytic system was recycled and used up to six times observing no appreciable loss in yield for the first four cycles. Moreover, we gathered mechanistic information by in situ 1H NMR monitoring the dehydration of fructose. To dissect the role of acidity on the reaction, we determined the Hammett acidity function of each salt. Comparison of these results with yields and reactivity observed in the presence of related monocationic salts and with a dicationic salt bearing only one sulfonic acid group, allowed stating that the reactivity observed is the result of the combined action of acidity and structural features of the catalysts. Overall, the approach proposed here could contribute to pave the way to increase sustainability in the raw material valorization processes.
RESUMO
The search of new enantioselective catalysts, able to promote synthetically useful organic reactions with high levels of asymmetric induction, should be associated with the attention to the suitable reaction medium able to achieve the best efficiency in chemical processes. We have investigated the enantioselective desymmetrization of cyclic meso-anhydrides in nonconventional reaction media such as ionic liquids and supramolecular gels. With this aim, we examined several variables in the reacting system: the nature of ionic liquid used as the reaction medium, the gelation solvent, the structure of the anhydrides, the structure of alcohols, the chiral catalysts, and the reaction conditions, i.e., temperature and time. The different components of the system differently influence the reaction outcome, and to understand the interactions existing among them, 1H NMR investigation was carried out. In general, the nonconventional reaction media demonstrated better performance than conventional ones, applying only a small amount of solvent. Good results in terms of yield and enantiomeric excess have been obtained in ionic liquid gels that seem promising media in the catalytic field. Furthermore, to the best of our knowledge, this is one of the first examples for the study of asymmetric alcoholysis of anhydrides in ionic liquid solution and gel phase.
RESUMO
Atmospheric aerosols in clean remote oceanic regions contribute significantly to the global albedo through the formation of haze and cloud layers; however, the relative importance of 'primary' wind-produced sea-spray over secondary (gas-to-particle conversion) sulphate in forming marine clouds remains unclear. Here we report on marine aerosols (PM1) over the Southern Ocean around Antarctica, in terms of their physical, chemical, and cloud droplet activation properties. Two predominant pristine air masses and aerosol populations were encountered: modified continental Antarctic (cAA) comprising predominantly sulphate with minimal sea-salt contribution and maritime Polar (mP) comprising sulphate plus sea-salt. We estimate that in cAA air, 75% of the CCN are activated into cloud droplets while in mP air, 37% are activated into droplets, for corresponding peak supersaturation ranges of 0.37-0.45% and 0.19-0.31%, respectively. When realistic marine boundary layer cloud supersaturations are considered (e.g. ~0.2-0.3%), sea-salt CCN contributed 2-13% of the activated nuclei in the cAA air and 8-51% for the marine air for surface-level wind speed < 16 m s-1. At higher wind speeds, primary marine aerosol can even contribute up to 100% of the activated CCN, for corresponding peak supersaturations as high as 0.32%.
Assuntos
Atmosfera/química , Oceanos e Mares , Estações do Ano , Aerossóis , Ar , Regiões Antárticas , Fenômenos Químicos , VentoRESUMO
The heat contained in the ocean (OHC) dominates the Earth's energy budget and hence represents a fundamental parameter for understanding climate changes. However, paucity of observational data hampers our knowledge on OHC variability, particularly in abyssal areas. Here, we analyze water characteristics, observed during the last three decades in the abyssal Ionian Sea (Eastern Mediterranean), where two competing convective sources of bottom water exist. We find a heat storage of ~1.6 W/m2 - twice that assessed globally in the same period - exceptionally well-spread throughout the local abyssal layers. Such an OHC accumulation stems from progressive warming and salinification of the Eastern Mediterranean, producing warmer near-bottom waters. We analyze a new process that involves convectively-generated waters reaching the abyss as well as the triggering of a diapycnal mixing due to rough bathymetry, which brings to a warming and thickening of the bottom layer, also influencing water-column potential vorticity. This may affect the prevailing circulation, altering the local cyclonic/anticyclonic long-term variability and hence precondition future water-masses formation and the redistribution of heat along the entire water-column.
RESUMO
HYPOTHESIS: Nanostructured sorbents and, in particular, supramolecular gels are emerging as efficient materials for the removal of toxic contaminants from water, like industrial dyes. It is also known that ionic liquids can dissolve significant amounts of dyes. Consequently, supramolecular ionic liquids gels could be highly efficient sorbents for dyes removal. This would also contribute to overcome the drawbacks associated with dye removal by liquid-liquid extraction with neat ionic liquids which would require large volumes of extractant and a more difficult separation of the phases. EXPERIMENTS: Herein we employed novel supramolecular ionic liquid gels based on diimidazolium salts bearing naturally occurring or biomass derived anions, to adsorb cationic and anionic dyes from wastewaters. We also carried out a detailed investigation of thermal, structural, morphological and rheological features of our gels to identify which of them are key in designing better sorbents for environmental remediation. FINDINGS: The most effective gels showed fast and thorough removal of cationic dyes like Rhodamine B. These gels could also be reused up to 20 times without any loss in removal efficiency. Overall, our ionic gels outperform most of gel-based sorbents systems so far reported in literature.