Compounding a High-Permittivity Thermoplastic Material and Its Applicability in Manufacturing of Microwave Photonic Crystals.

Additive Manufacturing (AM) techniques allow the production of complex geometries unattainable through other traditional technologies. This advantage lends itself well to rapidly iterating and improving upon the design of microwave photonic crystals, which are structures with intricate, repeating features. The issue tackled by this work involves compounding a high-permittivity material that can be used to produce 3D microwave photonic structures using polymer extrusion-based AM techniques. This material was acrylonitrile butadiene styrene (ABS)-based and used barium titanate (BaTiO3) ceramic as the high-permittivity component of the composite and involved the use of a surfactant and a plasticizer to facilitate processing. Initial small amounts of the material were compounded using an internal batch mixer and studied using polymer thermal analysis techniques, such as thermogravimetric analysis, rheometry, and differential scanning calorimetry to determine the proper processing conditions. The production of the material was then scaled up using a twin-screw extruder system, producing homogeneous pellets. Finally, the thermoplastic composite was used with a screw-based, material extrusion additive manufacturing technique to produce a slab for measuring the relative permittivity of the material, as well as a preliminary 3D photonic crystal. The real part of the permittivity was measured to be 12.85 (loss tangent = 0.046) in the range of 10 to 12 GHz, representing the highest permittivity ever demonstrated for a thermoplastic AM composite at microwave frequencies.

Extended Range of Dipole-Dipole Interactions in Periodically Structured Photonic Media.

The interaction between quantum two-level systems is typically short range in free space and in most photonic environments. We show that diminishing momentum isosurfaces with equal frequencies can create a significantly extended range of interaction between distant quantum systems. The extended range is robust and does not rely on a specific location or orientation of the transition dipoles. A general relation between the interaction range and properties of the isosurface is described for structured photonic media. It provides a new way to mediate long-range quantum behavior.

Tip-Enhanced Raman Excitation Spectroscopy (TERES): Direct Spectral Characterization of the Gap-Mode Plasmon.

The plasmonic properties of tip-substrate composite systems are of vital importance to near-field optical spectroscopy, in particular tip-enhanced Raman spectroscopy (TERS), which enables operando studies of nanoscale chemistry at a single molecule level. The nanocavities formed in the tip-substrate junction also offer a highly tunable platform for studying field-matter interactions at the nanoscale. While the coupled nanoparticle dimer model offers a correct qualitative description of gap-mode plasmon effects, it ignores the full spectrum of multipolar tip plasmon modes and their interaction with surface plasmon polariton (SPP) excitation in the substrate. Herein, we perform the first tip-enhanced Raman excitation spectroscopy (TERES) experiment and use the results, both in ambient and aqueous media, in combination with electrodynamics simulations, to explore the plasmonic response of a Au tip-Au substrate composite system. The gap-mode plasmon features a wide spectral window corresponding to a host of tip plasmon modes interacting with the plasmonic substrate. Simulations of the electric field confinement demonstrate that optimal spatial resolution is achieved when a hybrid plasmon mode that combines a multipolar tip plasmon and a substrate SPP is excited. Nevertheless, a wide spectral window over 1000 nm is available for exciting the tip plasmon with high spatial resolution, which enables the simultaneous resonant detection of different molecular species. This window is robust as a function of tip-substrate distance and tip radius of curvature, indicating that many choices of tips will work, but it is restricted to wavelengths longer than ∼600 nm for the Au tip-Au substrate combination. Other combinations, such as Ag tip-Ag substrate, can access wavelengths as low as 350 nm.

In Situ Nanoscale Redox Mapping Using Tip-Enhanced Raman Spectroscopy.

Electrochemical atomic force microscopy tip-enhanced Raman spectroscopy (EC-AFM-TERS) was used for the first time to spatially resolve local heterogeneity in redox behavior on an electrode surface in situ and at the nanoscale. A structurally well-defined Au(111) nanoplate located on a polycrystalline ITO substrate was studied to examine nanoscale redox contrast across the two electrode materials. By monitoring the TERS intensity of adsorbed Nile Blue (NB) molecules on the electrode surface, TERS maps were acquired with different applied potentials. The EC-TERS maps showed a spatial contrast in TERS intensity between Au and ITO. TERS line scans near the edge of a 20 nm-thick Au nanoplate demonstrated a spatial resolution of 81 nm under an applied potential of -0.1 V vs Ag/AgCl. The intensities from the TERS maps at various applied potentials followed Nernstian behavior, and a formal potential ( E0') map was constructed by fitting the TERS intensity at each pixel to the Nernst equation. Clear nanoscale spatial contrast between the Au and ITO regions was observed in the E0' map. In addition, statistical analysis of the E0' map identified a statistically significant 4 mV difference in E0' on Au vs ITO. Electrochemical heterogeneity was also evident in the E0' distribution, as a bimodal distribution was observed in E0' on polycrystalline ITO, but not on gold. A direct comparison between an AFM friction image and the E0' map resolved the electrochemical behavior of individual ITO grains with a spatial resolution of ∼40 nm. The variation in E0' was attributed to different local surface charges on the ITO grains. Such site-specific electrochemical information with nanoscale spatial and few mV voltage resolutions is not available using ensemble spectroelectrochemical methods. We expect that in situ redox mapping at the nanoscale using EC-AFM-TERS will have a crucial impact on understanding the role of nanoscale surface features in applications such as electrocatalysis.

Single-Molecule Chemistry with Surface- and Tip-Enhanced Raman Spectroscopy.

Single-molecule (SM) surface-enhanced Raman spectroscopy (SERS) and tip-enhanced Raman spectroscopy (TERS) have emerged as analytical techniques for characterizing molecular systems in nanoscale environments. SERS and TERS use plasmonically enhanced Raman scattering to characterize the chemical information on single molecules. Additionally, TERS can image single molecules with subnanometer spatial resolution. In this review, we cover the development and history of SERS and TERS, including the concept of SERS hot spots and the plasmonic nanostructures necessary for SM detection, the past and current methodologies for verifying SMSERS, and investigations into understanding the signal heterogeneities observed with SMSERS. Moving on to TERS, we cover tip fabrication and the physical origins of the subnanometer spatial resolution. Then, we highlight recent advances of SMSERS and TERS in fields such as electrochemistry, catalysis, and SM electronics, which all benefit from the vibrational characterization of single molecules. SMSERS and TERS provide new insights on molecular behavior that would otherwise be obscured in an ensemble-averaged measurement.

Tip-Enhanced Raman Voltammetry: Coverage Dependence and Quantitative Modeling.

Electrochemical atomic force microscopy tip-enhanced Raman spectroscopy (EC-AFM-TERS) was employed for the first time to observe nanoscale spatial variations in the formal potential, E0', of a surface-bound redox couple. TERS cyclic voltammograms (TERS CVs) of single Nile Blue (NB) molecules were acquired at different locations spaced 5-10 nm apart on an indium tin oxide (ITO) electrode. Analysis of TERS CVs at different coverages was used to verify the observation of single-molecule electrochemistry. The resulting TERS CVs were fit to the Laviron model for surface-bound electroactive species to quantitatively extract the formal potential E0' at each spatial location. Histograms of single-molecule E0' at each coverage indicate that the electrochemical behavior of the cationic oxidized species is less sensitive to local environment than the neutral reduced species. This information is not accessible using purely electrochemical methods or ensemble spectroelectrochemical measurements. We anticipate that quantitative modeling and measurement of site-specific electrochemistry with EC-AFM-TERS will have a profound impact on our understanding of the role of nanoscale electrode heterogeneity in applications such as electrocatalysis, biological electron transfer, and energy production and storage.

Investigating Nanoscale Electrochemistry with Surface- and Tip-Enhanced Raman Spectroscopy.

The chemical sensitivity of surface-enhanced Raman spectroscopy (SERS) methodologies allows for the investigation of heterogeneous chemical reactions with high sensitivity. Specifically, SERS methodologies are well-suited to study electron transfer (ET) reactions, which lie at the heart of numerous fundamental processes: electrocatalysis, solar energy conversion, energy storage in batteries, and biological events such as photosynthesis. Heterogeneous ET reactions are commonly monitored by electrochemical methods such as cyclic voltammetry, observing billions of electrochemical events per second. Since the first proof of detecting single molecules by redox cycling, there has been growing interest in examining electrochemistry at the nanoscale and single-molecule levels. Doing so unravels details that would otherwise be obscured by an ensemble experiment. The use of optical spectroscopies, such as SERS, to elucidate nanoscale electrochemical behavior is an attractive alternative to traditional approaches such as scanning electrochemical microscopy (SECM). While techniques such as single-molecule fluorescence or electrogenerated chemiluminescence have been used to optically monitor electrochemical events, SERS methodologies, in particular, have shown great promise for exploring electrochemistry at the nanoscale. SERS is ideally suited to study nanoscale electrochemistry because the Raman-enhancing metallic, nanoscale substrate duly serves as the working electrode material. Moreover, SERS has the ability to directly probe single molecules without redox cycling and can achieve nanoscale spatial resolution in combination with super-resolution or scanning probe microscopies. This Account summarizes the latest progress from the Van Duyne and Willets groups toward understanding nanoelectrochemistry using Raman spectroscopic methodologies. The first half of this Account highlights three techniques that have been recently used to probe few- or single-molecule electrochemical events: single-molecule SERS (SMSERS), superlocalization SERS imaging, and tip-enhanced Raman spectroscopy (TERS). While all of the studies we discuss probe model redox dye systems, the experiments described herein push the study of nanoscale electrochemistry toward the fundamental limit, in terms of both chemical sensitivity and spatial resolution. The second half of this Account discusses current experimental strategies for studying nanoelectrochemistry with SERS techniques, which includes relevant electrochemically and optically active molecules, substrates, and substrate functionalization methods. In particular, we highlight the wide variety of SERS-active substrates and optically active molecules that can be implemented for EC-SERS, as well as the need to carefully characterize both the electrochemistry and resultant EC-SERS response of each new redox-active molecule studied. Finally, we conclude this Account with our perspective on the future directions of studying nanoscale electrochemistry with SERS/TERS, which includes the integration of SECM with TERS and the use of theoretical methods to further describe the fundamental intricacies of single-molecule, single-site electrochemistry at the nanoscale.

Probing Redox Reactions at the Nanoscale with Electrochemical Tip-Enhanced Raman Spectroscopy.

A fundamental understanding of electrochemical processes at the nanoscale is crucial to solving problems in research areas as diverse as electrocatalysis, energy storage, biological electron transfer, and plasmon-driven chemistry. However, there is currently no technique capable of directly providing chemical information about molecules undergoing heterogeneous charge transfer at the nanoscale. Tip-enhanced Raman spectroscopy (TERS) uniquely offers subnanometer spatial resolution and single-molecule sensitivity, making it the ideal tool for studying nanoscale electrochemical processes with high chemical specificity. In this work, we demonstrate the first electrochemical TERS (EC-TERS) study of the nanoscale redox behavior of Nile Blue (NB), and compare these results with conventional cyclic voltammetry (CV). We successfully monitor the disappearance of the 591 cm(-1) band of NB upon reduction and its reversible reappearance upon oxidation during the CV. Interestingly, we observe a negative shift of more than 100 mV in the onset of the potential response of the TERS intensity of the 591 cm(-1) band, compared to the onset of faradaic current in the CV. We hypothesize that perturbation of the electrical double-layer by the TERS tip locally alters the effective potential experienced by NB molecules in the tip-sample junction. However, we demonstrate that the tip has no effect on the local charge transfer kinetics. Additionally, we observe step-like behavior in some TERS voltammograms corresponding to reduction and oxidation of single or few NB molecules. We also show that the coverage of NB is nonuniform across the ITO surface. We conclude with a discussion of methods to overcome the perturbation of the double-layer and general considerations for using TERS to study nanoscale electrochemical processes.