Technological and Physical-Chemical Evaluation of Cotton Gauzes Impregnated with Semisolid Preparations for Wound Healing.

Chronic wounds are marked by an extended healing period during which damaged tissues fail to undergo orderly and timely repair. Examples of chronic wounds encompass venous ulcers, pressure ulcers, and diabetic foot ulcers. The process of wound healing is complex and dynamic, relying on the interplay and response among various cells and mediators. In this study, four marketed wound dressing products based on cotton gauzes impregnated with different semisolid products (namely Betadine® 10%, Connettivina® Bio Plus Fitostimoline® Plus, and Non-Ad® gauzes) have been characterized for their physicochemical properties and ex vivo behaviors. More in detail, the pH and rheological features of semisolid formulations impregnating the gauzes were analyzed along with their ability to adhere to the gauzes. The most promising ones were selected and compared in ex vivo experiments on fresh pig skin. The pH measurements showed an acidic environment for all the tested solutions, albeit with variations in mean values, ranging from 2.66 to 4.50. The outcomes of rheological studies demonstrated that all the semisolid preparations impregnating the gauzes exhibited a pseudoplastic behavior, with significant differences in the pseudoplasticity index across the preparations, which is likely to influence their ability to adhere to the gauze. A rheological study in oscillatory mode revealed rheological behavior typical of a viscous solution only for the cream impregnating non-paraffin gauzes. The other products exhibited rheological behavior typical of a weak gel, which is expected to be advantageous as regards the capability of the semisolid preparation to create and maintain the space within the wound and to provide protection to the injured tissue. Results of ex vivo experiments demonstrated that Fitostimoline® Plus was more effective than Connettivina® Bio Plus in promoting both skin hydration and energy.

Thermosensitive In Situ Gelling Poloxamers/Hyaluronic Acid Gels for Hydrocortisone Ocular Delivery.

This study endeavored to overcome the physiological barriers hindering optimal bioavailability in ophthalmic therapeutics by devising drug delivery platforms that allow therapeutically effective drug concentrations in ocular tissues for prolonged times. Thermosensitive drug delivery platforms were formulated by blending poloxamers (F68 and F127) with low-molecular-weight hyaluronic acid (HA) in various concentrations and loaded with hydrocortisone (HC). Among the formulations examined, only three were deemed suitable based on their desirable gelling properties at a temperature close to the eye's surface conditions while also ensuring minimal gelation time for swift ocular application. Rheological analyses unveiled the ability of the formulations to develop gels at suitable temperatures, elucidating the gel-like characteristics around the physiological temperature essential for sustained drug release. The differential scanning calorimetry findings elucidated intricate hydrogel-water interactions, indicating that HA affects the water-polymer interactions within the gel by increasing the platform hydrophilicity. Also, in vitro drug release studies demonstrated significant hydrocortisone release within 8 h, governed by an anomalous transport mechanism, prompting further investigation for optimized release kinetics. The produced platforms offer promising prospects for efficacious ocular drug delivery, addressing pivotal challenges in ocular therapeutics and heralding future advancements in the domain.

Physico-Chemical Properties and Valorization of Biopolymers Derived from Food Processing Waste.

The widespread use of synthetic plastics, as well as the waste produced at the end of their life cycle, poses serious environmental issues. In this context, bio-based plastics, i.e., natural polymers produced from renewable resources, represent a promising alternative to petroleum-based materials. One potential source of biopolymers is waste from the food industry, the use of which also provides a sustainable and eco-friendly solution to waste management. Thus, the aim of this work concerns the extraction of polysaccharide fractions from lemon, tomato and fennel waste. Characterizing the chemical-physical and thermodynamic properties of these polysaccharides is an essential step in evaluating their potential applications. Hence, the solubility of the extracted polysaccharides in different solvents, including water and organic solvents, was determined since it is an important parameter that determines their properties and applications. Also, acid-base titration was carried out, along with thermoanalytical tests through differential scanning calorimetry. Finally, the electrospinning of waste polysaccharides was investigated to explore the feasibility of obtaining polysaccharide-based membranes. Indeed, electrospun fibers are a promising structure/system via which it is possible to apply waste polysaccharides in packaging or well-being applications. Thanks to processing feasibility, it is possible to electrospin waste polysaccharides by combining them with different materials to obtain porous 3D membranes made of nanosized fibers.

Investigating the Effect of Surface Hydrophilicity on the Destiny of PLGA-Poloxamer Nanoparticles in an In Vivo Animal Model.

This study aimed to examine the impact of different surface properties of poly(lactic-co-glycolic) acid (PLGA) nanoparticles (P NPs) and PLGA-Poloxamer nanoparticles (PP NPs) on their in vivo biodistribution. For this purpose, NPs were formulated via nanoprecipitation and loaded with diphenylhexatriene (DPH), a fluorescent dye. The obtained NPs underwent comprehensive characterization, encompassing their morphology, technological attributes, DPH release rate, and thermodynamic properties. The produced NPs were then administered to wild-type mice via intraperitoneal injection, and, at scheduled time intervals, the animals were euthanized. Blood samples, as well as the liver, lungs, and kidneys, were extracted for histological examination and biodistribution analysis. The findings of this investigation revealed that the presence of poloxamers led to smaller NP sizes and induced partial crystallinity in the NPs. The biodistribution and histological results from in vivo experiments evidenced that both, P and PP NPs, exhibited comparable concentrations in the bloodstream, while P NPs could not be detected in the other organs examined. Conversely, PP NPs were primarily sequestered by the lungs and, to a lesser extent, by the kidneys. Future research endeavors will focus on investigating the behavior of drug-loaded NPs in pathological animal models.

In Vitro and In Vivo Safety of Hyaluronic Acid-Decorated Microparticles for Intravitreal Injection of Palmitoylethanolamide, Citicoline, or Glial-Cell-Derived Neurotrophic Factor.

The treatment of posterior eye segment diseases through intravitreal injection requires repeated injections of an active molecule, which may be associated with serious side effects and poor patient compliance. One brilliant strategy to overcome these issues is the use of drug-loaded microparticles for sustained release, aiming at reducing the frequency of injections. Therefore, the aim of this work was to assess the safety features of poly(lactic-co-glycolic acid) (PLGA)-based, hyaluronic acid-decorated microparticles loaded with palmitoylethanolamide (PEA), citicoline (CIT), or glial-cell-derived neurotrophic factor (GDNF). Microparticles were prepared by double emulsion-solvent evaporation and fully characterized for their technological features. Microparticles possessed a satisfactory safety profile in vitro on human retinal pigment epithelial (ARPE-19) cells. Interestingly, the administration of free GDNF led to a loss of cell viability, while GDNF sustained release displayed a positive effect in that regard. In vivo results confirmed the safety profile of both empty and loaded microparticles. Overall, the outcomes suggest that the produced microparticles are promising for improving the local administration of neuroprotective molecules. Further studies will be devoted to assess the therapeutic ability of microparticles.

Anionic polysaccharides for stabilization and sustained release of antimicrobial peptides.

Chemical and enzymatic in vivo degradation of antimicrobial peptides represents a major challenge for their therapeutic use to treat bacterial infections. In this work, anionic polysaccharides were investigated for their ability to increase the chemical stability and achieve sustained release of such peptides. The investigated formulations comprised a combination of antimicrobial peptides (vancomycin (VAN) and daptomycin (DAP)) and anionic polysaccharides (xanthan gum (XA), hyaluronic acid (HA), propylene glycol alginate (PGA) and alginic acid (ALG)). VAN dissolved in buffer of pH 7.4 and incubated at 37 °C showed first order degradation kinetics with a reaction rate constant kobs of 5.5 × 10-2 day-1 corresponding with a half-life of 13.9 days. However, once VAN was present in a XA, HA or PGA-based hydrogel, kobs decreased to (2.1-2.3) × 10-2 day-1 while kobs was not affected in an alginate hydrogel and a dextran solution (5.4 × 10-2 and 4.4 × 10-2 day-1). Under the same conditions, XA and PGA also effectively decreased kobs for DAP (5.6 × 10-2 day-1), whereas ALG had no effect and HA even increased the degradation rate. These results demonstrate that the investigated polysaccharides (except ALG for both peptides and HA for DAP) slowed down the degradation of VAN and DAP. DSC analysis was used to investigate on polysaccharide ability to bind water molecules. Rheological analysis highlighted that the polysaccharides containing VAN displayed an increase in G' of their formulations, pointing that the peptides interaction act as crosslinker of the polymer chains. The obtained results suggest that the mechanism of stabilization of VAN and DAP against hydrolytic degradation is conferred by electrostatic interactions between the ionizable amine groups of the drugs and the anionic carboxylate groups of the polysaccharides. This, in turn, results in a close proximity of the drugs to the polysaccharide chain, where the water molecules have a lower mobility and, therefore, a lower thermodynamic activity.

Hyaluronan-coated nanoparticles for active tumor targeting: Influence of polysaccharide molecular weight on cell uptake.

Here we aimed to correlate different molecular weights of hyaluronic acid (HA), 200, 800 and 1437 kDa, used to decorate poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles (NPs), to their cell uptakes. NP internalization kinetics in CD44-overexpressing breast carcinoma cells were quantified, using healthy fibroblast cells as reference. Actually, NP uptake and selectivity by tumor cells were maximized for NPs HA 800 kDa, while being minimum for NPs HA1400 kDa. This unexpected result could be explained considering that the interaction between NPs and tumor cells is dictated by rearrangement and conformation of that segment of HA chain that actually protrudes from the NPs. Overall, results obtained in this work point at how HA molecular weight, is pivotal project parameter in NP formulation to promote active targeting in the CD44 overexpressing cancer cells.

Characterization of Hyaluronic Acid-Coated PLGA Nanoparticles by Surface-Enhanced Raman Spectroscopy.

Nanoparticles (NPs) coated with hyaluronic acid (HA) seem to be increasingly promising for targeted therapy due to HA chemical versatility, which allows them to bind drugs of different natures, and their affinity with the transmembrane receptor CD-44, overexpressed in tumor cells. However, an essential aspect for clinical use of NPs is formulation stability over time. For these reasons, analytical techniques capable of characterizing their physico-chemical properties are needed. In this work, poly(lactide-co-glycolide) (PLGA) NPs with an average diameter of 100-150 nm, coated with a few 10 s of nm of HA, were synthesized. For stability characterization, two complementary investigative techniques were used: Dynamic Light Scattering (DLS) and Surface-Enhanced Raman Scattering (SERS) spectroscopy. The first technique provided information on size, polidispersity index, and zeta-potential, and the second provided a deeper insight on the NP surface chemicals, allowing distinguishing of HA-coated NPs from uncoated ones. Furthermore, in order to estimate formulation stability over time, NPs were measured and monitored for two weeks. SERS results showed a progressive decrease in the signal associated with HA, which, however, is not detectable by the DLS measurements.

A novel ß-hairpin peptide derived from the ARC repressor selectively interacts with the major groove of B-DNA.

Transcription factors (TFs) have a remarkable role in the homeostasis of the organisms and there is a growing interest in how they recognize and interact with specific DNA sequences. TFs recognize DNA using a variety of structural motifs. Among those, the ribbon-helix-helix (RHH) proteins, exemplified by the MetJ and ARC repressors, form dimers that insert antiparallel ß-sheets into the major groove of DNA. A great chemical challenge consists of using the principles of DNA recognition by TFs to design minimized peptides that maintain the DNA affinity and specificity characteristics of the natural counterparts. In this context, a peptide mimic of an antiparallel ß-sheet is very attractive since it can be obtained by a single peptide chain folding in a ß-hairpin structure and can be as short as 14 amino acids or less. Herein, we designed eight linear and two cyclic dodeca-peptides endowed with ß-hairpins. Their DNA binding properties have been investigated using fluorescence spectroscopy together with the conformational analysis through circular dichroism and solution NMR. We found that one of our peptides, peptide 6, is able to bind DNA, albeit without sequence selectivity. Notably, it shows a topological selectivity for the major groove of the DNA which is the interaction site of ARC and many other DNA-binding proteins. Moreover, we found that a type I' ß-hairpin folding pattern is a favorite peptide structure for interaction with the B-DNA major groove. Peptide 6 is a valuable lead compound for the development of novel analogs with sequence selectivity.

Mechanical behavior of bioactive poly(ethylene glycol) diacrylate matrices for biomedical application.

The biomedical applications of physically entangled polymeric hydrogels are generally limited due to their weak mechanical properties, rapid swelling and dissolution in physiologically relevant environment. Chemical crosslinking helps stabilizing hydrogel structure and enhancing mechanical properties, thereby allowing a higher stability in phisiological environment. In this context, it is known that the mechanical properties of the hydrogel are affected by both the molecular weight (MW) of the starting polymer and the concentration of the crosslinker. Here, our aim was to assess the influence of polymer MW and concentration in the precursor solution on the mechanical features of the final hydrogel and their influence on cells-material interaction. In detail, 3D synthetic matrices based on poly(ethylene glycol) diacrylate (PEGDA) at two molecular weights (PEG 700 and PEG 3400) and at three different concentrations (10, 20, 40 w/v %), which were photopolymerized using darocour as an initiator, were studied. Then, infrared and swelling analyses, along with a comprehensive mechanical characterization of the obtained hydrogels (i.e. oscillatory shear and confined compression tests), were performed. Finally, to evaluate the influence of the mechanical features on the biological behaviour, the hydrogels were characterized in terms of cell adhesion percentage and cell viability after functionalizing the substrates with RGD peptide at three different concentrations. Results have demonstrated that both the Young's modulus (E) in compression and the elastic modulus (G') in shear of the hydrogels increase with increasing polymer precursor concentration. E decreased as MW increased, and the differences are more relevant for more concentrated hydrogels. On the contrary, G' appears to increase with increasing PEGDA MW and in particular for the lowest polymer precursor concentration. The biological results have demonstrated that cells cultured for longer times seem to prefer PEG 3400 hydrogels with a larger mesh size structure that posses higher viscoelastic properties in shear.

Electron dispersive X-ray spectroscopy and degradation properties of hyaluronic acid decorated microparticles.

The purpose of this study was to produce poly(DL-lactic-co-glycolic acid) (PLGA) - based microparticles (MPs), externally decorated with hyaluronic acid (HA). The MPs are intended for intravitreal injections in the treatment of posterior eye segment and have been designed to prolong the release of growth factors into the vitreous body, therefore aiming to increase the time interval between two consecutive injections. The MPs, prepared by a modified double emulsion-solvent evaporation technique and loaded with bovine serum albumins (BSA) and ciliary neurotrophic factor (CNTF), were spherical, with a diameter around 70 µm and a >90% encapsulation efficiency. Energy Dispersive Spectroscopy (EDS) outcomes indicated that HA presence in the external aqueous phase of the emulsion did affect the surface properties of MPs. Moreover, poloxamers drastically slowed down MP degradation properties which are, in turn, closely related to their ability to prolong drug release. This is promising for the envisaged application of the produced MPs. Further work will be devoted to optimizing MP formulation with respect to the envisaged intravitreal route of administration.

CXCL12 loaded-dermal filler captures CXCR4 expressing melanoma circulating tumor cells.

Development of distant metastasis relies on interactions between cancer and stromal cells. CXCL12, also known as stromal-derived factor 1α (SDF-1α), is a major chemokine constitutively secreted in bone marrow, lymph nodes, liver and lung, playing a critical role in the migration and seeding of neoplastic cells. CXCL12 activates the CXCR4 receptor that is overexpressed in several human cancer cells. Recent evidence reveals that tumors induce pre-metastatic niches in target organ producing tumor-derived factors. Pre-metastatic niches represent a tumor growth-favoring microenvironment in absence of cancer cells. A commercially available dermal filler, hyaluronic acid (HA) -based gel, loaded with CXCL12 (CLG) reproduced a "fake" pre-metastatic niche. In vitro, B16-hCXCR4-GFP, human cxcr4 expressing murine melanoma cells efficiently migrated toward CLG. In vivo, CLGs and empty gels (EGs) were subcutaneously injected into C57BL/6 mice and 5 days later B16-hCXCR4-GFP cells were intravenously inoculated. CLGs were able to recruit a significantly higher number of B16-hCXCR4-GFP cells as compared to EGs, with reduced lung metastasis in mice carrying CLG. CLG were infiltrated by higher number of CD45-positive leukocytes, mainly neutrophils CD11b+Ly6G+ cells, myeloid CD11b+Ly6G- and macrophages F4/80. CLG recovered cells recapitulated the features of B16-hCXCR4-GFP (epithelial, melanin rich, MELAN A/ S100/ c-Kit/CXCR4 pos; α-SMA neg). Thus a HA-based dermal filler loaded with CXCL12 can attract and trap CXCR4+tumor cells. The CLG trapped cells can be recovered and biologically characterized. As a corollary, a reduction in CXCR4 dependent lung metastasis was detected.

Drug micro-carriers with a hyaluronic acid corona toward a diffusion-limited aggregation within the vitreous body.

Posterior eye segment diseases are treated through monthly intravitreal injections, that evoke serious side effects. A promising approach to reduce injection frequency consists in producing biodegradable microspheres (MPs) releasing the protein in the vitreous body for long times. Moreover, a rational design of these MPs requires a discouraged diffusion/sedimentation within the intravitreal space, which are detrimental for the vision and the control over drug release kinetics. In this work, poly(lactic-co-glycolic acid) (PLGA)-based MPs encapsulating bovine serum albumin (BSA) were coated with hyaluronic acid (HA) at two molecular weights and tested for their release, diffusion and degradation features in simulated vitreous body (SVB). Results indicate that HA corona prolongs MP degradation time and BSA release. Furthermore, HA coating increased the affinity between MPs and SVB, thereby repressing device transport compared to control PLGA MPs. Results hold promise for the possible application of HA-decorated MPs for intravitreal injection of protein drugs.

Combination therapy for the treatment of pancreatic cancer through hyaluronic acid-decorated nanoparticles loaded with quercetin and gemcitabine: A preliminary in vitro study.

Combination chemotherapy by means of two or more drugs is prone to suppressing or discouraging the inception of multidrug resistance, exploiting the fact that diverse drugs act in different points of the cellular cycle of amplifying tumor cells. For example, the combination of gemcitabine (GMC) with quercetin (QCT) showed a synergistic effect in inhibiting the migration of pancreatic cancer cells. Consequently, herein GMC and QCT have been loaded within biodegradable nanoparticles (NPs) based on poly(lactic-co-glycolic acid), externally decorated with hyaluronic acid (HA; viz., PPHA NPs), which plays a major role in drug targeting to tumors due to its ability to specifically interact with CD44 receptor, that is overexpressed in many tumors. The produced HA-decorated NPs loaded with GMC and QCT showed an improved cytotoxicity and cellular uptake toward two cell lines of pancreatic ductal adenocarcinoma, namely Mia-PaCa-2 and PANC-1, compared with both the bare drugs and the drugs loaded in NPs which do not expose HA on the surface. HA-decorated NPs were also able to improve the anti-inflammatory properties of QCT, therefore leading to a decrease of interleukin cellular levels in both cell lines, preliminarily stimulated with lipopolysaccharides. This result is of special interest also considering the crucial role of interleukins in progression, metastatic processes, and drug resistance of human pancreas cancer cells.

Chitosan-Based Polyelectrolyte Complexes for Doxorubicin and Zoledronic Acid Combined Therapy to Overcome Multidrug Resistance.

This study aimed to develop nanovectors co-encapsulating doxorubicin (Doxo) and zoledronic acid (Zol) for a combined therapy against Doxo-resistant tumors. Chitosan (CHI)-based polyelectrolyte complexes (PECs) prepared by ionotropic gelation technique were proposed. The influence of some experimental parameters was evaluated in order to optimize the PECs in terms of size and polydispersity index (PI). PEC stability was studied by monitoring size and zeta potential over time. In vitro studies were carried out on wild-type and Doxo-resistant cell lines, to assess both the synergism between Doxo and Zol, as well as the restoring of Doxo sensitivity. Polymer concentration, incubation time, and use of a surfactant were found to be crucial to achieving small size and monodisperse PECs. Doxo and Zol, only when encapsulated in PECs, showed a synergistic antiproliferative effect in all the tested cell lines. Importantly, the incubation of Doxo-resistant cell lines with Doxo/Zol co-encapsulating PECs resulted in the restoration of Doxo sensitivity.

Engineering of thermoresponsive gels as a fake metastatic niche.

Chemoattraction through the CXCR4-CXCL12 axis has been shown to be an important mechanism to direct circulating tumor cells toward distant sites. The objective of this work was to prepare a fake metastatic niche made up of a gel loaded with CXCL12. The gel is designed to create a steep concentration gradient of the chemokine in the proximity of the site of administration/injection, aimed to divert and capture circulating CXCR4+ tumor cells. To this aim, different thermoresponsive gels based on methylcellulose (MC) or poloxamers, loaded with CXCL12, with or without hyaluronic acid (HA) were designed and their mechanical properties correlated with the ability to attract and capture in vitro CXCR4+ cells. Results of in vitro cell studies showed that all prepared gels induced CEM tumor cell migration whereas only gels based on MC embedded with CXCL12 are able to capture them.

Chitosan Gel to Treat Pressure Ulcers: A Clinical Pilot Study.

Chitosan is biopolymer with promising properties in wound healing. Chronic wounds represent a significant burden to both the patient and the medical system. Among chronic wounds, pressure ulcers are one of the most common types of complex wound. The efficacy and the tolerability of chitosan gel formulation, prepared into the hospital pharmacy, in the treatment of pressure ulcers of moderate severity were evaluated. The endpoint of this phase II study was the reduction of the area of the lesion by at least 20% after four weeks of treatment. Thus, 20 adult volunteers with pressure ulcers within predetermined parameters were involved in a 30 days study. Dressing change was performed twice a week at outpatient clinic upon chronic wounds management. In the 90% of patients involved in the study, the treatment was effective, with a reduction of the area of the lesion and wound healing progress. The study demonstrated the efficacy of the gel formulation for treatment of pressure ulcers, also providing a strong reduction of patient management costs.

Nano-precipitated curcumin loaded particles: effect of carrier size and drug complexation with (2-hydroxypropyl)-ß-cyclodextrin on their biological performances.

In this work, curcumin (CURC)-encapsulating nanoparticles (NPs), made up of an amphiphilic blend of poloxamers and PLGA (PPC NPs) at different polymer concentrations, were prepared by nanoprecipitation. CURC was preliminarily complexed with (2-hydroxypropyl)-ß-cyclodextrin (HPßCD) to improve its loading efficiency. The formation of host-guest complexes of CURC with HPßCD (CD-CURC) was confirmed by means of 1HNMR studies and differential scanning calorimetry (DSC). Nanoprecipitation allowed to obtain NPs with a small size (90-120nm depending on the polymer concentration), a narrow size distribution and stable in water for 30days at 4°C and in RPMI-1640 cell culture medium up to 72h at 37°C. The in vitro release of CD-CURC, sustained up to 5days, was governed mainly by a diffusive mechanism. It was also found that the produced NPs were efficiently internalized by mesothelioma cells (MSTO-211H) in the cytoplasmic space, at an extent strongly dependent on NP size and polydispesity index, therefore pointing at the importance of NP preparation method in improving their uptake.

Surface modified zeolite-based granulates for the sustained release of diclofenac sodium.

In this study, a granulate for the oral controlled delivery of diclofenac sodium (DS), an anionic sparingly soluble nonsteroidal anti-inflammatory drug, has been realized by wet granulation, using a surface modified natural zeolite (SMNZ) as an excipient. The surface modification of the zeolite has been achieved by means of a cationic surfactant, so as to allow the loading of DS through ionic interaction and bestow a control over the drug release mechanism. The granules possessed a satisfactory dosage uniformity, a flowability suitable for an oral dosage form manufacturing, along with a sustained drug release up to 9h, driven by both ion exchange and transport kinetics. Furthermore, the obtained granulate did not elicit a significant cytotoxicity and could also induce a prolonged anti-inflammatory effect on RAW264.7 cells. Taking also into account that natural zeolites are generally abundant and economic, SMNZ can be considered as an attracting alternative excipient for the production of granules with sustained release features.

Development of nanoemulsions for topical delivery of vitamin K1.

Vitamin K1 (VK1) is a natural and lipophilic compound currently used in dermatological formulations. In this work, nanoemulsions containing VK1 have been proposed to overcome some issues associated to semisolid VK1-incorporating formulations. The study has been focused on the design of a lipid-free aqueous formulation, easy to prepare and with low cost of production. Thus, a simply protocol, using a low-energy method, has been used to spontaneously form the nanoemulsions. The nanoemulsion composition has been optimized to improve its physical stability during storage in different conditions. Then, the possibility to administer VK1-containing nanoemulsions by nebulization without significant alteration of the formulation was tested. Moreover, the VK1 accumulation into the skin layers have been evaluated through permeation experiments on Franz cells, ATR-FITR analysis, confocal laser scanning microscopy (CLSM) observations, and high performance liquid chromatography (HPLC) analysis. The study demonstrated that NEs represent an interesting option for the commercial development of an aqueous spray formulation for the topical delivery of VK1.