RESUMO
BACKGROUND: New elastomeric half mask respirator (EHMR) models without exhalation valves (EVs) or with exhalation valve filters (EVFs) are facilitating expanded use in health settings to reduce workers' exposure to airborne hazards while acting as source control to prevent pathogen spread. The physical comfort of new models has not been assessed in comparison to previously used EHMRs with EVs. METHODS: Researchers assessed 1,962 healthcare and emergency medical service personnels' self-reported adverse experiences from two cohorts while wearing EHMR models with EVs (Cohort 1, n=1,080) and without EVs or with EVFs (Cohort 2, n=882). Fisher's Exact Test identified differences between the cohorts accounting for organizational factors when possible. RESULTS: Cohort 1 respondents experienced communication challenges and discomfort when wearing the EHMR >1 hour statistically significantly more often than Cohort 2. Cohort 2 respondents reported statistically significantly more instances of difficulty breathing, moisture buildup, being uncomfortable to wear <1 hour, and being uncomfortably warm. CONCLUSIONS: Discomfort is prevalent among end users and more often among those wearing EHMRs without an EV/with an EVF. As EHMR research and development advances, prevalence in use may increase for emergency and routine situations. Organizations may not only need guidance about respirator selection but also model-specific selection.
RESUMO
BACKGROUND: Reusable elastomeric half-mask respirators (EHMR) are an alternative to address shortages of disposable respirators. While respirator discomfort has been noted as a barrier to adherence to wearing an N95 filtering facepiece respirator (FFR) among health care personnel (HCP), few have examined EHMR comfort while providing patient care, which was the purpose of this study. METHOD: Among a cohort of 183 HCP, we prospectively examined how HCP rated EHMR tolerability using the Respirator Comfort, Wearing Experience, and Function Instrument (R-COMFI) questionnaire at Study Week 2 and Week 10. At the completion of the study (Week-12), HCP compared EHMR comfort with their prior N95 FFR use. Overall R-COMFI scores and three subscales (comfort, wear experience, and function) were examined as well as individual item scores. FINDINGS: The HCP reported an improved overall R-COMFI score (lower score more favorable, 30.0 vs. 28.7/47, respectively) from Week 2 to Week 10. Many individual item scores improved or remained low over this period, except difficulty communicating with patients and coworkers. The overall R-COMFI scores for the EHMR were more favorable than for the N95 FFR (33.7 vs. 37.4, respectively), with a large proportion of workers indicating their perception that EHMR fit better, provided better protection, and they preferred to wear it in pandemic conditions compared with the N95 FFR. CONCLUSION/APPLICATION TO PRACTICE: Findings suggest that the EHMR is a feasible respiratory protection device with respect to tolerance. EHMRs can be considered as a possible alternative to the N95 FFR in the health care setting. Future work is needed in the EHMR design to improve communication.
Assuntos
COVID-19 , Pessoal de Saúde , Respiradores N95 , Humanos , COVID-19/prevenção & controle , COVID-19/epidemiologia , Masculino , Feminino , Adulto , Estudos Prospectivos , Pessoa de Meia-Idade , Inquéritos e Questionários , Dispositivos de Proteção Respiratória/normas , Máscaras/normas , Reutilização de Equipamento/normas , Pandemias/prevenção & controle , Desenho de Equipamento/normas , ElastômerosRESUMO
BACKGROUND: During public health emergencies, demand for N95 filtering facepiece respirators (N95 FFRs) can outpace supply. Elastomeric half-mask respirators (EHMRs) are a potential alternative that are reusable and provide the same or higher levels of protection. This study sought to examine the practical aspects of EHMR use among health care personnel (HCP). METHODS: Between September and December 2021, 183 HCPs at 2 tertiary referral centers participated in this 3-month EHMR deployment, wearing the EHMR whenever respiratory protection was required according to hospital protocols (ie, when an N95 FFR would typically be worn) and responding to surveys about their experience. RESULTS: Participants wore EHMRs typically 1 to 3 hours per shift, reported disinfecting the respirator after 85% of the removals, and reported high confidence in using the EHMR following the study. EHMRs caused minimal interference with patient care tasks, though they did inhibit communication. DISCUSSION: HCP who had not previously worn an EHMR were able to wear it as an alternative to an N95 FFR without much-reported interference with their job tasks and with high disinfection compliance. CONCLUSIONS: This study highlights the feasibility of the deployment of EHMRs during a public health emergency when an alternative respirator option is necessary.
Assuntos
Pessoal de Saúde , Respiradores N95 , Humanos , Respiradores N95/normas , Masculino , COVID-19/prevenção & controle , Adulto , Feminino , Dispositivos de Proteção Respiratória/normas , Pessoa de Meia-Idade , Máscaras/normas , Inquéritos e Questionários , Reutilização de Equipamento/normas , Desinfecção/métodos , Elastômeros , SARS-CoV-2RESUMO
BACKGROUND: A major concern among health care experts is a shortage of N95 filtering facepiece respirators during a pandemic. If the supply of N95 filtering facepiece respirators becomes limited, reusable elastomeric half-mask respirators (EHMRs) may be used to protect health care workers. The focus of this study was to evaluate the effects on the filter performance of wiping decontamination for EHMR P100 filter cartridges. METHODS: The filter cartridge exterior of EHMR Honeywell, Moldex, and Mine Safety Appliance (MSA) models was wiped using quaternary ammonium and sodium hypochlorite wipes. These filter cartridge properties were assessed including observational analysis and filter performance tests. These wiping and assessing procedures were repeated after each set of wiping cycles (50, 100, 150, 200, and 400 cycles) to determine the effects of wiping decontamination. RESULTS: For sodium hypochlorite wipes, Honeywell, Moldex, and MSA models passed the National Institute for Occupational Safety and Health (NIOSH) liquid particulate penetration criteria for all wiping cycles from 50 to 400 (penetrations<0.014%). For quaternary ammonium wipes, filter penetrations of Moldex failed (penetrations>0.03%) after 150 cycles, while the filter penetrations of Honeywell and MSA passed for all wiping cycles (penetrations ≤0.013%). CONCLUSIONS: Wiping decontamination methods using sodium hypochlorite and quaternary ammonium wipes could be considered promising decontamination candidates for Honeywell, Moldex, and MSA reuse, except for the wiping number selection for Moldex (<150 cycles) when using the quaternary ammonium wipe.
Assuntos
Compostos de Amônio , Dispositivos de Proteção Respiratória , Humanos , Hipoclorito de Sódio , Descontaminação/métodos , Filtração , Ventiladores MecânicosRESUMO
BACKGROUND: Disposable N95 respirator shortages during the COVID-19 and 2009 H1N1 influenza pandemics highlighted the need for reusable alternatives, such as elastomeric half-mask respirators (EHMRs). Two US medical organizations deployed reusable EHMRs during the COVID-19 response. In addition to wipe-based disinfection following patient care episodes expected per local policies at both organizations, postshift centralized cleaning and disinfection (C&D) was expected at one site (A), permitting shared-pool EHMR use, and optional at the other (Site B), where EHMRs were issued to individuals. Using a survey, we evaluated disinfection practices reported by EHMR users and predictors of disinfection behaviors and perceptions. METHODS: Surveys assessed EHMR disinfection practices, occupational characteristics, EHMR use frequency, training, and individual-issue versus shared-pool EHMR use. RESULTS: Of 1080 EHMR users completing the survey, 76% reported that they disinfect the EHMR after each patient encounter, which was the expected practice at both sites. Increasing EHMR use, recall of disinfection training, and work in intensive care or emergency settings significantly influenced higher reporting of this practice. 36% of respondents reported using centralized C&D, although reporting was higher at the site (A) where this was expected (53%). Confidence in cleanliness of the EHMR following centralized C&D was not influenced by individual versus shared-pool EHMR issue. CONCLUSIONS: Most EHMR users reported adherence with expected post-care individual-based disinfection of EHMRs but did not necessarily use standardized, centralized C&D. Future efforts to limit reliance on behavior related to respirator disinfection may improve EHMR implementation in healthcare to avert dependence on single-use, disposable N95 respirators.
Assuntos
COVID-19 , Vírus da Influenza A Subtipo H1N1 , Dispositivos de Proteção Respiratória , Humanos , Desinfecção , COVID-19/prevenção & controle , Ventiladores Mecânicos , Atenção à SaúdeRESUMO
BACKGROUND: Availability of personal protective equipment (PPE) and its effective use may influence safety climate perceptions among health care personnel (HCP). It is unclear how health care organizations can leverage the effective use of respiratory protection to engage in continuous improvement of their safety climate, which can inform opportunities for employee education and engagement. METHODS: After using an elastomeric half mask respirator (EHMR) as their primary form of respiratory protection for several months, 1,080 HCP provided feedback in an electronic survey about respiratory protection training, confidence in EHMR use, barriers during use, and perceived safety climate. Ordinal logistic regressions were used as nonlinear models to test relationships between these variables. FINDINGS: We observed that an increase in user confidence (p < .013), training content (p < .001), training formats (p < .001), and a decrease in EHMR barriers (p < .001) were associated with a statistically significant increase in proactive safety climate. In the second model, an increase in user confidence (p < .006) and training content (p < .001), and a decrease in barriers (p < .001), was associated with a statistically significant increase in compliant safety climate. CONCLUSIONS/APPLICATION TO PRACTICE: HCP EHMR confidence was positively associated with safety climate perceptions, underscoring the value of competency building by respiratory protection leaders prior to implementation. Because fewer barriers experienced while using an EHMR were associated with a more positive perception of safety climate, it is important to first communicate with end users about potential barriers and, second, to continue research with end users and manufacturers to improve the design of EHMRs moving forward.
Assuntos
Dispositivos de Proteção Respiratória , Humanos , Cultura Organizacional , Equipamento de Proteção Individual , Pessoal de Saúde , Ventiladores Mecânicos , Atenção à SaúdeRESUMO
OBJECTIVE: This study evaluated health care workers' (HCWs') knowledge and confidence in using elastomeric half-mask respirator (EHMR) attributes known to influence usage. METHODS: Health care workers were surveyed regarding their EHMR donning and doffing experience. Respondents were categorized into competency categories based on their scores. Category differences were analyzed using χ 2 and multiple logistic regression. RESULTS: Seventy-two percent showed high levels of EHMR donning and doffing knowledge and confidence (mastery); however, 21% had greater confidence than knowledge (misinformed). Respiratory therapists had greater odds of mastery than other HCWs ( P < 0.05), whereas those working in medical/surgical and pediatric units had greater odds of doubt than other HCWs ( P < 0.01). CONCLUSIONS: Although most HCWs show high knowledge and confidence with EHMR use, strategies to confirm respirator use competency may ensure greater HCWs protection.
Assuntos
Dispositivos de Proteção Respiratória , Criança , Pessoal de Saúde , Humanos , Ventiladores MecânicosRESUMO
The National Institute for Occupational Safety and Health's methods and requirements for air-purifying respirator breathing resistance in 42 CFR Part 84 do not include work of breathing. The International Organization for Standardization Technical Committee 94, Subcommittee 15 utilized work of breathing to evaluate airflow resistance for all classes of respiratory protective devices as part of their development of performance standards regarding respiratory protective devices. The objectives of this study were: (1) to evaluate the relationship between the International Organization for Standardization's work of breathing measurements and the National Institute for Occupational Safety and Health's breathing resistance test results; (2) to provide scientific bases for standard development organizations to decide if work of breathing should be adopted; and (3) to establish regression equations for manufacturers and test laboratories to estimate work of breathing measurements using breathing resistance data. A total of 43 respirators were tested for work of breathing at minute ventilation rates of 10, 35, 65, 105, and 135 liters per minute. Breathing resistance obtained at a constant flow rate of 85 liters per minute per National Institute of Occupational Safety and Health protocol was correlated to each of the parameters (total work of breathing, inhalation, and exhalation) obtained from the work of breathing tests. The ratio of work of breathing exhalation to work of breathing inhalation for all air-purifying respirators is similar to the ratio of exhalation to inhalation resistance when tested individually. The ratios were about 0.8 for filtering facepiece respirators, 0.5 for half-masks, and 0.25 for full-facepiece respirators. The National Institute for Occupational Safety and Health's breathing resistance is close to work of breathing's minute ventilation of 35 liters per minute, which represents the common walking/working pace in most workplaces. The work of breathing and the National Institute of Occupational Safety and Health's breathing resistance were found to be strongly and positively correlated (r values of 0.7-0.9) at each work rate for inhalation and exhalation. In addition, linear and multiple regression models (R-squared values of 0.5-0.8) were also established to estimate work of breathing using breathing resistance. Work of breathing was correlated higher to breathing resistance for full-facepiece and half-mask elastomeric respirators than filtering facepiece respirators for inhalation. For exhalation, filtering facepiece respirators were correlated much better than full-facepiece and half-mask elastomeric respirators. Therefore, the National Institute for Occupational Safety and Health's breathing resistance may reasonably be used to predict work of breathing for air-purifying respirators. The results could also be used by manufacturers for product development and evaluation.
Assuntos
Exposição Ocupacional , Saúde Ocupacional , Dispositivos de Proteção Respiratória , Filtração , National Institute for Occupational Safety and Health, U.S. , Exposição Ocupacional/prevenção & controle , Taxa Respiratória , Estados Unidos , Trabalho RespiratórioRESUMO
Recently, total inward leakage (TIL) for filtering facepiece and elastomeric half-mask respirators (EHRs) was measured according to the International Organization for Standardization (ISO) test method standard 16900-1:2014 that showed larger TIL for corn oil aerosol than for NaCl aerosol. Comparison of TIL measured for different aerosols for higher protection level respirators is lacking. The objective of this study was to determine TIL for EHRs, full-facepiece respirators, and loose-fitting and tight-fitting powered air-purifying respirators (PAPRs) using NaCl and corn oil aerosols to compare. TIL was measured for two models each of EHRs, full-facepiece respirators, and loose-fitting and tight-fitting PAPRs. After fit testing with a PortaCount (TSI, St. Paul, MN) using the Occupational Safety and Health Administration (OSHA) protocol, eight subjects were tested in the NaCl aerosol chamber first and then in the corn oil aerosol chamber, while another eight subjects tested in the reverse order. Subjects were randomly assigned to one of the two groups. TIL was measured as a ratio of mass-based aerosol concentrations inside the mask to the test chamber while the subjects performed ISO 16900-1-defined exercises using continuous sampling methods. The concentration of corn oil aerosol was measured with one light scattering photometer, alternately, and NaCl aerosol was measured using two flame photometers. Results showed the geometric mean TIL for EHR was significantly (p < 0.05) larger for corn oil aerosol than for NaCl aerosol. EHR models equipped with P100 filters showed relatively smaller TIL values than the same models with N95 filters showing that TIL was inversely related to filter efficiency. Interestingly, TIL was significantly (p < 0.05) larger for NaCl aerosol than for corn oil aerosol for PAPRs, but not for full-facepiece respirators. TIL was inversely related to fit factors of respirator types. Overall, filter efficiency and faceseal leakage determine TIL. The relative trends in TIL for the two aerosols' test methods differ between respirator types indicating that generalization of TIL for respirator types may not be appropriate when using different test agents.
Assuntos
Exposição Ocupacional , Dispositivos de Proteção Respiratória , Aerossóis , Óleo de Milho , Filtração , Humanos , National Institute for Occupational Safety and Health, U.S. , Exposição Ocupacional/prevenção & controle , Tamanho da Partícula , Cloreto de Sódio/análise , Estados UnidosRESUMO
As part of development of performance standards, the International Organization for Standardization (ISO) technical committee, ISO/TC 94/SC 15 Respiratory protective devices (RPD), adopted work of breathing (WOB) to evaluate airflow resistance for all designs (classes) of respiratory protective devices. The interests of the National Institute for Occupational Safety and Health's (NIOSH) National Personal Protective Technology Laboratory (NPPTL) are to compare the proposed WOB method and results for current RPD with those for present resistance methods. The objectives here were to assemble a method to meet the ISO SC15 standards, validate operation and conformance, and assess repeatability of WOB measurements for RPD. WOB method implementation and use followed standards ISO 16900-5:2016 and ISO 16900-12:2016. Volume-averaged total work of breathing (WOBT/VT where VT is tidal volume) determined for standard orifices was analyzed for variation and bias. After fabrication and assembly, the method gave preliminary verification orifice results that met ISO requirements and were equivalent to those from other laboratories. Evaluation of additional results from RPD testing showed tidal volume and frequency determined compliance. Appropriate adjustments reduced average absolute bias to 1.7%. Average coefficient of variation for WOBT/VT was 2.3%. Over 97% of results obtained during significant use over time met specifications. WOBT/VT for as-received air-purifying and supplied-air RPD were repeatable (p<0.05). WOBT/VT for unsealed half mask air-purifying RPD was an average of 31% lower compared to sealed. When experimental parameters were appropriately adjusted, the ISO WOB method implemented by NIOSH NPPTL consistently provided ISO-compliant verification WOBT/VT. Results for appropriately sealed RPD were reproducible.