Alkali metal reduction of crown ether encapsulated alkali metal cations.

[{SiNDipp}BeClM]2 ({SiNDipp} = {CH2SiMe2N(Dipp)}2; M = Li, Na, K, Rb) are converted to ionic species by treatment with a crown ether. Whereas the lithium derivative reacts with Na or K to provide [{SiNDipp}BeCl]-[M(12-cr-4)2]+ (M = Na, K), the resultant sodium species is resistant to reduction by potassium. These observations are rationalised by a hybrid experimental/theoretical analysis.

Pathway to a molecular calcium methyl.

The dimeric ß-diketiminato calcium hydride, [(BDI)CaH]2 (BDI = HC{(Me)CN-2,6-iPr2C6H3}2), reacts with ZnMe2 to afford the bimetallic calcium zincate complex, [(BDI)Ca(µ-CH3)2Zn(µ-H)]2, which subsequently undergoes an intramolecular reaction to effect the formation of [(BDI)CaMe]2, a notable omission from the homologous series of ß-diketiminato alkylcalcium derivatives.

Mixing and matching N,N- and N,O-chelates in anionic Mg(I) compounds: synthesis and reactivity with RNCNR and CO.

Reduction of [Mg(NON)]2 ([NON]2- = [O(SiMe2NDipp)2]2-, Dipp = 2,6-iPr2C6H3) affords Mg(I) species containing NON- and NNO-ligands ([NNO]2- = [N(Dipp)SiMe2N(Dipp)SiMe2O]2-). The products of reactions with iPrNCNiPr and CO are consistent with the presence of reducing Mg(I) centres. Extraction with THF affords [K(THF)2]2[(NNO)Mg-Mg(NNO)] with a structurally characterised Mg-Mg bond that was examined using density functional theory.

The borylamino-diborata-allyl anion.

Reactions of ß-diketiminato alkaline earth alkyldiboranate derivatives [(BDI)Ae{pinBB(R)pin}] (BDI = HC{(Me)CNDipp}2; Dipp = 2,6-i-Pr2C6H3; Ae = Mg, R = n-Bu or Ae = Ca, R = n-hexyl) with t-BuNC provide access to the respective group 2 derivatives of unprecedented diborata-allyl, {(pinB)2CNBpin(t-Bu)}-, anions. Although the necessary mode of B-C bond cleavage implicated in these transformations could not be elucidated, further studies of the reactivity of magnesium triboranates toward isonitriles delivered a more general and rational synthetic access to analogous anionic moieties. Extending this latter reactivity to a less symmetric triboranate variant also provided an isomeric Mg-C-bonded dibora-alkyl species and sufficient experimental insight to prompt theoretical evaluation of this reactivity. DFT calculations, thus, support a reaction pathway predicated on initial RNC attack at a peripheral boron centre and the intermediacy of such dibora-alkyl intermediates.

[{SiNDipp}MgNa]2: A Potent Molecular Reducing Agent.

The bimetallic species, [{SiNDipp}MgNa]2 [{SiNDipp} = {CH2SiMe2N(Dipp)}2; (Dipp = 2,6-i-Pr2C6H3)], is shown to be a potent reducing agent, able to effect one- or two-electron reduction of either dioxygen, TEMPO, anthracene, benzophenone, or diphenylacetylene. In most cases, the bimetallic reaction products imply that the dissimilar alkaline metal centers react with a level of cooperativity. EPR analysis of the benzophenone-derived reaction and the concurrent isolation of [{SiNDipp}Mg(OCPh2)2], however, illustrate that treatment with such reducible, but O-basic, species can also result in reactivity in which the metals provide independent reaction products. The notable E-stereochemistry of the diphenylacetylene reduction product prompted a computational investigation of the PhC≡CPh addition. This analysis invokes a series of elementary steps that necessitate ring-opening via Mg+ → Na+ amido group migration of the SiNDipp ligand, providing insight into the previously observed lability of the bidentate dianion and its consequent proclivity toward macrocyclization.

Twinned versus linked organometallics - bimetallic "half-baguette" pentalenide complexes of Rh(I).

The application of Mg[Ph4Pn] and Li·K[Ph4Pn] in transmetalation reactions to a range of Rh(I) precursors led to the formation of "half-baguette" anti-[RhI(L)n]2[µ:η5:η5Ph4Pn] (L = 1,5-cyclooctadiene, norbornadiene, ethylene; n = 1, 2) and syn-[RhI(CO)2]2[µ:η5:η5Ph4Pn] complexes as well as the related iridium complex anti-[IrI(COD)]2[µ:η5:η5Ph4Pn]. With CO exclusive syn metalation was obtained even when using mono-nuclear Rh(I) precursors, indicating an electronic preference for syn metalation. DFT analysis showed this to be the result of π overlap between the adjacent M(CO)2 units which overcompensates for dz2 repulsion of the metals, an effect which can be overridden by steric clash of the auxiliary ligands to yield anti-configuration as seen in the larger olefin complexes. syn-[RhI(CO)2]2[µ:η5:η5Ph4Pn] is a rare example of a twinned organometallic where the two metals are held flexibly in close proximity, but the two d8 Rh(I) centres did not show signs of M-M bonding interactions or exhibit Lewis basic behaviour as in some related mono-nuclear Cp complexes due to the acceptor properties of the ligands. The ligand substitution chemistry of syn-[RhI(CO)2]2[µ:η5:η5Ph4Pn] was investigated with a series of electronically and sterically diverse donor ligands (P(OPh)3, P(OMe)3, PPh3, PMe3, dppe) yielding new mono- and bis-substituted complexes, with E-syn-[RhI(CO)(P{OR})3]2[µ:η5:η5Ph4Pn] (R = Me, Ph) characterised by XRD.

Stabilisation of the [SiH6]2- Anion within a Supramolecular Assembly.

The hypercoordinate [SiH6]2- anion is not stable in solution. Here, we report the room temperature, solution stable molecular [SiH6]2- complex, [{KCa(NON)(OEt2)}2][SiH6] (NON=4,5-bis(2,6-diisopropylanilido)-2,7-di-tert-butyl-9,9-dimethyl-xanthene)), where the [SiH6]2- anion is stabilised within a supramolecular assembly that mimics the solid-state environment of the anion in the lattice of K2SiH6. Solution-state reactivity of the complex towards carbon monoxide, benzaldehyde, azobenzene and acetonitrile is reported, yielding a range of reduction and C-C coupled products.

Aluminyl derived ethene functionalization with heteroallenes, leading to an intramolecular ligand rearrangement.

The aluminacyclopropane K[Al(NON)(η-C2H4)] ([NON]2- = [O(SiMe2NDipp)2]2-, Dipp = 2,6-iPr2C6H3) reacts with CO2 and iPrNCNiPr to afford ring-expanded products of C-C bond formation. The latter system undergoes a 1,3-silyl retro-Brook rearrangement of the NON-group, to afford the [NNO]2- ligand ([NNO]2- = [N(Dipp)SiMe2N(Dipp)SiMe2O]2-). The mechanism of transformation was examined by density functional theory (DFT).

Pinacol Cross-Coupling Promoted by an Aluminyl Anion.

A simple sequential addition protocol for the reductive coupling of ketones and aldehydes by a potassium aluminyl grants access to unsymmetrical pinacolate derivatives. Isolation of an aluminium ketyl complex presents evidence for the accessibility of radical species. Product release from the aluminium centre was achieved using an iodosilane, forming the disilylated 1,2-diol and a neutral aluminium iodide, thereby demonstrating the steps required to generate a closed synthetic cycle for pinacol (cross) coupling at an aluminyl anion.

Alkali metal reduction of alkali metal cations.

Counter to synthetic convention and expectation provided by the relevant standard reduction potentials, the chloroberyllate, [{SiNDipp}BeClLi]2 [{SiNDipp} = {CH2SiMe2N(Dipp)}2; Dipp = 2,6-i-Pr2C6H3)], reacts with the group 1 elements (M = Na, K, Rb, Cs) to provide the respective heavier alkali metal analogues, [{SiNDipp}BeClM]2, through selective reduction of the Li+ cation. Whereas only [{SiNDipp}BeClRb]2 is amenable to reduction by potassium to its nearest lighter congener, these species may also be sequentially interconverted by treatment of [{SiNDipp}BeClM]2 by the successively heavier group 1 metal. A theoretical analysis combining density functional theory (DFT) with elemental thermochemistry is used to rationalise these observations, where consideration of the relevant enthalpies of atomisation of each alkali metal in its bulk metallic form proved crucial in accounting for experimental observations.

Reductive Coupling of a Diazoalkane Derivative Promoted by a Potassium Aluminyl and Elimination of Dinitrogen to Generate a Reactive Aluminium Ketimide.

The reaction of 9-diazo-9H-fluorene (fluN2 ) with the potassium aluminyl K[Al(NON)] ([NON]2- =[O(SiMe2 NDipp)2 ]2- , Dipp=2,6-iPr2 C6 H3 ) affords K[Al(NON)(κN1 ,N3 -{(fluN2 )2 })] (1). Structural analysis shows a near planar 1,4-di(9H-fluoren-9-ylidene)tetraazadiide ligand that chelates to the aluminium. The thermally induced elimination of dinitrogen from 1 affords the neutral aluminium ketimide complex, Al(NON)(N=flu)(THF) (2) and the 1,2-di(9H-fluoren-9-yl)diazene dianion as the potassium salt, [K2 (THF)3 ][fluN=Nflu] (3). The reaction of 2 with N,N'-diisopropylcarbodiimide (iPrN=C=NiPr) affords the aluminium guanidinate complex, Al(NON){N(iPr)C(N=CMe2 )N(CHflu)} (4), showing a rare example of reactivity at a metal ketimide ligand. Density functional theory (DFT) calculations have been used to examine the bonding in the newly formed [(fluN2 )2 ]2- ligand in 1 and the ketimide bonding in 2. The mechanism leading to the formation of 4 has also been studied using this technique.

Seven-Membered Cyclic Diamidoalumanyls of Heavier Alkali Metals: Structures and C-H Activation of Arenes.

Like the previously reported potassium-based system, rubidium and cesium reduction of [{SiNDipp}AlI] ({SiNDipp} = {CH2SiMe2NDipp}2) with the heavier alkali metals [M = Rb and Cs] provides dimeric group 1 alumanyl derivatives, [{SiNDipp}AlM]2. In contrast, similar treatment with sodium results in over-reduction and incorporation of a formal equivalent of [{SiNDipp}Na2] into the resultant sodium alumanyl species. The dimeric K, Rb, and Cs compounds display a variable efficacy toward the C-H oxidative addition of arene C-H bonds at elevated temperatures (Cs > Rb > K, 110 °C) to yield (hydrido)(organo)aluminate species. Consistent with the synthetic experimental observations, computational (DFT) assessment of the benzene C-H activation indicates that rate-determining attack of the Al(I) nucleophile within the dimeric species is facilitated by π-engagement of the arene with the electrophilic M+ cation, which becomes increasingly favorable as group 1 is descended.

Controlled reductive C-C coupling of isocyanides promoted by an aluminyl anion.

We report the reaction of the potassium aluminyl, K[Al(NON)] ([NON]2- = [O(SiMe2NDipp)2]2-, Dipp = 2,6-iPr2C6H3) with a series of isocyanide substrates (R-NC). In the case of tBu-NC, degradation of the isocyanide was observed generating an isomeric mixture of the corresponding aluminium cyanido-κC and -κN compounds, K[Al(NON)(H)(CN)]/K[Al(NON)(H)(NC)]. The reaction with 2,6-dimethylphenyl isocyanide (Dmp-NC), gave a C3-homologation product, which in addition to C-C bond formation showed dearomatisation of one of the aromatic substituents. In contrast, using adamantyl isocyanide Ad-NC allowed both the C2- and C3-homologation products to be isolated, allowing a degree of control to be exercised over the chain growth process. These data also show that the reaction proceeds through a stepwise addition, supported in this study by the synthesis of the mixed [(Ad-NC)2(Dmp-NC)]2- product. Computational analysis of the bonding within the homologised products confirm a high degree of multiple bond character in the exocyclic ketenimine units of the C2- and C3-products. In addition, the mechanism of chain growth was investigated, identifying different possible pathways leading to the observed products, and highlighting the importance of the potassium cation in formation of the initial C2-chain.

A Blueprint for the Stabilization of Sub-Valent Alkaline Earth Complexes.

The study of sub-valent Group 2 chemistry is a relatively new research field, being established in 2007 with the report of the first Mg(I) dimers. These species are stabilized by the formation of a Mg-Mg covalent bond; however, the extension of this chemistry to heavier alkaline earth (AE) metals has been frustrated by significant synthetic challenges, primarily associated with the instability of heavy AE-AE interactions. Here we present a new blueprint for the stabilization of heavy AE(I) complexes, based upon the reduction of AE(II) precursors with planar coordination geometries. We report the synthesis and structural characterisation of homoleptic trigonal planar AE(II) complexes of the monodentate amides {N(SiMe3 )2 }- and {N(Mes)(SiMe3 )}- . DFT calculations showed that the LUMOs of these complexes all show some d-character for AE = Ca-Ba. DFT analysis of the square planar Sr(II) complex [Sr{N(SiMe3 )2 }(dioxane)2 ]∞ revealed analogous frontier orbital d-character. AE(I) complexes that could be accessed by reduction of these AE(II) precursors were modelled computationally, revealing exergonic formation in all cases. Crucially, NBO calculations show that some d-character is preserved in the SOMO of theoretical AE(I) products upon reduction, showing that d-orbitals could play a crucial role in achieving stable heavy AE(I) complexes.

On the Barton Copper-Catalyzed C3-Arylation of Indoles using Triarylbismuth bis(trifluoroacetate) Reagents.

Invited for this month's cover are the collaborating groups of Prof. Alexandre Gagnon at the Université du Québec à Montréal in Canada, and Dr. Claire McMullin at the University of Bath in the UK. The cover picture represents the "Chasse-galerie", a popular French-Canadian tale published by the author Honoré Beaugrand in 1892, adapted with landmarks from Montréal, London, and Bath. The aryl groups are being transferred from a pentavalent triarylbismuth reagent to the C3 position of an indole via a copper-catalyzed C-H activation mechanism. Cover designed by Lysanne Arseneau. More information can be found in the Research Article by Claire L. McMullin, Alexandre Gagnon, and co-workers.

Li vs Na: Divergent Reaction Patterns between Organolithium and Organosodium Complexes and Ligand-Catalyzed Ketone/Aldehyde Methylenation.

Organosodium chemistry is underdeveloped compared with organolithium chemistry, and all the reported organosodium complexes exhibit similar, if not identical, reactivity patterns to their lithium counterparts. Herein, we report a rare organosodium monomeric complex, namely, [Na(CH2SiMe3)(Me6Tren)] (1-Na) (Me6Tren: tris[2-(dimethylamino)ethyl]amine) stabilized by a tetra-dentate neutral amine ligand Me6Tren. Employing organo-carbonyl substrates (ketones, aldehydes, amides, ester), we demonstrated that 1-Na features distinct reactivity patterns compared with its lithium counterpart, [Li(CH2SiMe3)(Me6Tren)] (1-Li). Based on this knowledge, we further developed a ligand-catalysis strategy to conduct ketone/aldehyde methylenations, using [NaCH2SiMe3]∞ as the CH2 feedstock, replacing the widely used but hazardous/expensive C═O methylenation methods, such as Wittig, Tebbe, Julia/Julia-Kocienski, Peterson, and so on.

Structural snapshots of an Al-Cu bond-mediated transformation of terminal acetylenes.

The copper(i) alumanyl derivative, [{SiNDipp}Al-Cu(NHCiPr)] (SiNDipp = {CH2SiMe2NDipp}2; Dipp = 2,6-di-isopropylphenyl; NHCiPr = N,N'-di-isopropyl-4,5-dimethyl-2-ylidene), reacts in a stepwise fashion with up to three equivalents of various terminal alkynes. This reactivity results in the sequential formation of cuprous (hydrido)(alkynyl)aluminate, (alkenyl)(alkynyl)aluminate and bis(alkynyl)aluminate derivatives, examples of which have been fully characterised. The process of alkene liberation resulting from the latter reaction step constitutes a unique case of alkyne transfer semi-hydrogenation in which the C-H acidic alkyne itself acts as a source of proton, with the Cu-Al bond providing the requisite electrons to effect reduction. This reaction sequence is validated by DFT calculations, which rationalise the variable stability of the initially formed heterobimetallic hydrides.

Cooperative dihydrogen activation at a Na(I)2/Mg(I)2 ensemble.

[{SiNDipp}MgNa]2 ({SiNDipp} = {CH2SiMe2N(Dipp)}2; Dipp = 2,6-i-Pr2C6H3) reacts directly with H2 to provide a heterobimetallic hydride. Although the transformation is complicated by the simultaneous disproportionation of magnesium, computational density functional theory (DFT) studies suggest that this reactivity is initiated by orbitally-constrained and interactions between the frontier MOs of both H2 and the tetrametallic core of [{SiNDipp}MgNa]2.

On the Barton Copper-Catalyzed C3-Arylation of Indoles using Triarylbismuth bis(trifluoroacetate) Reagents.

We disclose herein our detailed investigation into the Barton copper-promoted C3-arylation of indoles using triarylbismuth bis(trifluoroacetates). The arylation of unsubstituted 1H-indole using Barton's conditions gave a low yield of the C3-arylated indole, along with small amounts of the product of double C2/C3-arylation and traces of the product of C2 arylation. On the contrary, the arylation of indoles blocked at the C2 position is highly efficient, affording the desired products of C3-arylation in good to excellent yields. The reaction operates under simple conditions, shows good substrate scope, excellent functional group compatibility, and allows the transfer of electron-neutral or deficient aryl groups. Computational studies propose a mechanism involving a trifluoroacetate-assisted C-H activation step.

Lithium, Tin(II), and Zinc Amino-Boryloxy Complexes: Synthesis and Characterization.

Analogous to the ubiquitous alkoxide ligand, metal boroxide and boryloxy complexes are an underexplored class of hard anionic O- ligand. A new series of amine-stabilized Li, Sn(II), and Zn boryloxy complexes, comprising electron-rich tetrahedral boron centers have been synthesized and characterized. All complexes have been characterized by one-dimensional (1D), two-dimensional (2D), and DOSY NMR, which are consistent with the solid-state structures unambiguously determined via single-crystal X-ray diffraction. Electron-rich µ2- (Sn and Zn) and µ3- (Li) boryloxy binding modes are observed. Compounds 6-9 are the first complexes of this class, with the chelating bis- and tris-phenol ligands providing a scaffold that can be easily functionalized and provides access to the boronic acid pro-ligand, hence allowing facile direct synthesis of the resulting compounds. Computational quantum chemical studies suggest a significant enhancement of the π-donor ability of the amine-stabilized boryloxy ligand because of electron donation from the amine functionality into the p-orbital of the boron atom.