RESUMO
AIM: There is an ongoing debate about the benefits of the facebow and individual articulator settings in prosthodontics when compared to simpler methods. This study aims to determine whether the implementation of novel algorithmic articulator concepts may be an alternative to avoid dynamic interference contacts during the design process of fixed posterior restorations and to which extent the occlusal morphology of the restoration is affected. MATERIALS AND METHODS: From a chairside CAD database, a total of 50 clinical patient cases documenting 61 planned fixed restorations in the posterior tooth region were selected. A common CAD software was used for the automated knowledge-based design process. When designing the restorations, functional concepts including the pure static occlusion, average articulation, 3 different articulator settings as a control, and a combination of a broad range of articulation parameters (full range dynamic articulation) were applied. The resulting dynamic contact points were both compared visually and metrically with a monitoring software. RESULTS: There is a highly significant difference in avoiding dynamic interference contacts when applying the full range dynamic articulation in comparison to the pure static occlusion (p<0.001) and the average articulation (p<0.001). Furthermore, the superimposition revealed that the surface of the restorations showed nearly no visual morphologic changes after virtually grinding-in the interpenetrating contact points. CONCLUSION: The full range dynamic articulation can be used for the design of small fixed posterior restorations to avoid most dynamic interference contacts, without the need for determining individual parameters for each patient.
RESUMO
Evolutionary changes in vertebrates are linked to genetic alterations that often affect tooth crown shape, which is a criterion of speciation events. The Notch pathway is highly conserved between species and controls morphogenetic processes in most developing organs, including teeth. Epithelial loss of the Notch-ligand Jagged1 in developing mouse molars affects the location, size and interconnections of their cusps that lead to minor tooth crown shape modifications convergent to those observed along Muridae evolution. RNA sequencing analysis revealed that these alterations are due to the modulation of more than 2000 genes and that Notch signaling is a hub for significant morphogenetic networks, such as Wnts and Fibroblast Growth Factors. The modeling of these tooth crown changes in mutant mice, via a three-dimensional metamorphosis approach, allowed prediction of how Jagged1-associated mutations in humans could affect the morphology of their teeth. These results shed new light on Notch/Jagged1-mediated signaling as one of the crucial components for dental variations in evolution.
Assuntos
Dente , Animais , Humanos , Camundongos , Fatores de Crescimento de Fibroblastos/metabolismo , Morfogênese , Mutação , Transdução de Sinais , Dente/metabolismo , Proteína Jagged-1RESUMO
OBJECTIVES: To test whether or not a chairside workflow (CHAIR) is similar to a labside workflow (LAB) in terms of efficacy (primary outcome) and efficiency (secondary outcome). MATERIAL AND METHODS: Eighteen subjects in need of a single-tooth restoration in the posterior region of the maxilla or mandible were consecutively recruited and randomly assigned to the CHAIR or LAB workflow. Patient-reported outcome measures (PROMs; efficacy) were assessed using a questionnaire with visual analog scale. The white AEsthetic score (WES) was applied to evaluate the AEsthetic outcome objectively. The clinical and laboratory time (efficiency) were recorded. Nonparametric methods were applied for the group comparisons. RESULTS: The overall median AEsthetic evaluation after treatment was 10 (interquartile range = IQR: 9.5-10) in group CHAIR and 10 (IQR: 9.5-10) in-group LAB (Mann-Whitney [MW] test p = 1.000). The WES amounted to 4 (IQR: 3-5) (CHAIR) and to 8 (IQR: 7-9) (LAB) (MW test p < 0.0001). The median total working time for the clinician in-group CHAIR was 49.9 min. (IQR: 40.9-63.7) and 41.4 min. (IQR: 37.2-58.2) in-group LAB (MW test p = 0.387). CONCLUSIONS: Subjective PROMs of single-tooth supported restorations fabricated in a CHAIR or LAB workflow led to similar scores of patients' satisfaction and a moderate negative correlation for the objective evaluation of the clinician in the LAB workflow. CLINICAL SIGNIFICANCE: PROMs can be considered a key element in the decision-making process for restoring single-tooth restorations. The patients' perception of AEsthetics was similar for the CHAIR or LAB workflows. The additional efforts undertaken with the LAB workflow did not result in a patient benefit when compared to a CHAIR workflow.
Assuntos
Coroas , Implantes Dentários para Um Único Dente , Humanos , Projetos Piloto , Satisfação do Paciente , Projetos de Pesquisa , Medidas de Resultados Relatados pelo PacienteRESUMO
PURPOSE: To evaluate the effects of overnight storage conditions on the dimensional stability and retention of prostheses, as well as the participant's subjective perception of these interventions. MATERIALS AND METHODS: Subjects with maxillary complete prostheses (CRPs) were randomly assigned to receive two interventions in a crossover design: storing the CRPs overnight in a dry or wet environment with a cleansing tablet. The denture intaglio surface was scanned, and outcome measures were collected before each intervention (BLN), post ntervention (PIS), and after immersion in water for 15 minutes after the intervention (WOC). Dimensional changes were analyzed for the total surface, anterior flange, palate, and tuberosities. Retention force was measured using a dynamometer, and the participants' subjective assessment of comfort, fit, and retention of their CRPs were collected. After verifying normal distribution, paired t and Wilcoxon signed-rank tests were used to check for any statistical significance (α = .05). RESULTS: Ten participants (mean age: 76.5 ± 5.9 y) were recruited in this study. Between BLN and PIS, the dimensional changes after dry intervention were significantly less than when stored wet for total surface (P = .009), anterior flange (P = .028), and the palate (P = .005). No difference was found between the effects of storage or washout interventions on objectively measured CRP retention. However, after WOC following dry storage, participants perceived a lower retention (P = .021), and a more comfortable palate after WOC following the wet intervention (P = .018). CONCLUSION: For dimensional stability, dry overnight storage of removable prostheses can safely be recommended when indicated. Immersion in water for 15 minutes does not seem to add advantages.
RESUMO
STATEMENT OF PROBLEM: The use of computer-aided design and computer-aided manufacturing (CAD-CAM) technologies is widely established, with single restorations or short fixed partial dentures having similar accuracy when generated from digital scans or conventional impressions. However, research on complete-arch scanning of edentulous jaws is sparse. PURPOSE: The purpose of this pilot in vitro study was to compare the accuracy of a digital scan with the conventional method in a workflow generating implant-supported complete-arch prostheses and to establish whether interference from flexible soft tissue segments affects accuracy. MATERIAL AND METHODS: An edentulous maxillary master cast containing 6 angled implant analogs was used and digitized with mounted scan bodies by using a high-precision laboratory scanner. The master cast was then scanned 10 times with 4 different intraoral scanners: TRIOS 3 with a complete-arch scanning strategy (TRI1) or implant-scanning strategy (TRI2), TRIOS Color (TRC), CEREC Omnicam (CER), and CEREC Primescan (PS). The same procedure was repeated with 4 different levels of free gingiva (G0-G3). Ten conventional impressions were obtained. Differences in implant position and direction were evaluated at the implant shoulder as mean values for trueness and interquartile range (IQR) for precision. Statistical analysis was performed by using the Kruskal-Wallis and post hoc Conover tests (α=.05). RESULTS: At G0, position deviations ranged from 34.8 µm (IQR 23.0 µm) (TRC) to 68.3 µm (12.2 µm) (CER). Direction deviations ranged from 0.34 degrees (IQR 0.18 degrees) (conventional) to 0.57 degrees (IQR 0.37 degrees) (TRI2). For digital systems, the position deviation ranged from 48.4 µm (IQR 5.9 µm) (PS) to 76.6 µm (IQR 8.1 µm) (TRC) at G1, from 36.3 µm (IQR 9.3 µm) (PS) to 79.9 µm (IQR 36.1 µm) (TRI1) at G2, and from 51.8 µm (IQR 14.3 µm) (PS) to 257.5 µm (IQR 106.3 µm) (TRC) at G3. The direction deviation ranged from 0.45 degrees (IQR 0.15 degrees) (CER) to 0.64 degrees (IQR 0.20 degrees) (TRC) at G1, from 0.38 degrees (IQR 0.05 degrees) (PS) to 0.925 degrees (IQR 0.09 degrees) (TRI) at G2, and from 0.44 degrees (IQR 0.07 degrees) (PS) to 1.634 degrees (IQR 1.08 degrees) (TRI) at G3. Statistical analysis revealed significant differences among the test groups for position (G0: P<.001; G1: P<.05; G2: P<.001; G3: P<.001) and direction (G0: P<.005; G1: P<.001; G2: P<.001; G3: P<.001). CONCLUSIONS: Without soft tissue interference, the accuracy of certain digital scanning systems was comparable with that of the conventional impression technique. The amount of flexible soft tissue interference affected the accuracy of the digital scans.
Assuntos
Implantes Dentários , Arcada Edêntula , Desenho Assistido por Computador , Arco Dental , Técnica de Moldagem Odontológica , Gengiva/diagnóstico por imagem , Humanos , Imageamento Tridimensional , Arcada Edêntula/diagnóstico por imagem , Modelos DentáriosRESUMO
An increasing number of accuracy studies on 3D digitizing systems, especially intraoral scanning devices, are being published in scientific and educational journals. The methods, measurement values, and statistical parameters of these studies vary. Certain inconsistencies exist, which lead to difficulty in terms of interpretation and sometimes even questionable conclusions being drawn. These issues make it almost impossible to compare the results of such studies. One aspect inherent in this is the mutable use of basic terms describing the quality of measurement outcomes. A clear definition of such terms and clear instructions as to their respective calculation processes is essential for communication among scientists as well as for reporting measurement results to the dental community. Therefore, the aim of the present guideline is to provide a clear definition of the accuracy, trueness, and precision as the basic terms in the context of digital dentistry. The survey for this guideline included the application of ISO Norms and their expansion to special aspects concerning 3D data acquisition and, in particular, surface meshes. Additionally, the literature was screened to collect approaches, which can be seen as useful for dealing with these terms when performing different kinds of studies.
Assuntos
Técnica de Moldagem Odontológica , Modelos Dentários , Desenho Assistido por Computador , Arco Dental , Humanos , Imageamento TridimensionalRESUMO
The purpose of this in vitro study was to compare the time efficiency of digital chairside and labside workflows with a conventional workflow for single-unit restorations. The time efficiency in this specific sense was defined as the time, which has to be spent in a dental office by a dental professional performing the relevant steps. A model with interchangeable teeth on position 36 was created. These teeth were differently prepared, responding to several clinical situations to perform single-unit restorations. Different manufacturing techniques were used: For the digital workflows, CEREC Omnicam (CER) and Trios 3 (TN/TI) were used. The conventional workflow, using a dual-arch tray impression technique, served as the control group. For the labside workflow (_L) and the conventional impression procedure (CO), the time necessary for the impressions and temporary restorations was recorded and served as operating time. The chairside workflow time was divided by the time for the entire workflow (_C) including scan, design, milling and finishing the milled restoration, and in the actual working time (_CW) leaving out the chairside milling of the restoration. Labside workflow time ranged from 9 min 27 s (CER_L) to 12 min 41 s (TI_L). Entire chairside time ranged from 43 min 35 s (CER_C) to 58 min 43 s (TI_C). Pure chairside working time ranged from 15 min 21 s (CER_CW) to 23 min 17 s (TI_CW). Conventional workflow time was 10 min 39 s (CO) on average. The digital labside workflow and the conventional workflow require a similar amount of time. The digital chairside workflow is more time consuming.
RESUMO
Dynamic occlusal loading during mastication is clinically relevant in the design and functional assessment of dental restorations and removable dentures, and in evaluating temporomandibular joint dysfunction. The aim of this study was to develop a modelling framework to evaluate subject-specific dynamic occlusal loading during chewing and biting over the entire dental arch. Measurements of jaw motion were performed on one healthy male adult using low-profile electromagnetic field sensors attached to the teeth, and occlusal anatomy quantified using an intra-oral scanner. During testing, the subject chewed and maximally compressed a piece of rubber between both second molars, first molars, premolars and their central incisors. The occlusal anatomy, rubber geometry and experimentally measured rubber material properties were combined in a finite element model. The measured mandibular motion was used to kinematically drive model simulations of chewing and biting of the rubber sample. Three-dimensional dynamic bite forces and contact pressures across the occlusal surfaces were then calculated. Both chewing and biting on the first molars produced the highest bite forces across the dental arch, and a large amount of anterior shear force was produced at the incisors and the second molars. During chewing, the initial tooth-rubber contact evolved from the buccal sides of the molars to the lingual sides at full mouth closure. Low-profile electromagnetic field sensors were shown to provide a clinically relevant measure of jaw kinematics with sufficient accuracy to drive finite element models of occlusal loading during chewing and biting. The modelling framework presented provides a basis for calculation of physiological, dynamic occlusal loading across the dental arch.
Assuntos
Campos Eletromagnéticos , Arcada Osseodentária/fisiologia , Mastigação/fisiologia , Modelos Biológicos , Adulto , Fenômenos Biomecânicos , Oclusão Dentária , Humanos , Masculino , Modelagem Computacional Específica para o Paciente , Reprodutibilidade dos TestesRESUMO
Motion of the mandible and temporomandibular joint (TMJ) plays a pivotal role in the function of the dentition and associated hard and soft tissue structures, and facilitates mastication, oral communication and access to respiratory and digestive systems. Quantification of TMJ kinematics is clinically relevant in cases of prosthetic rehabilitations, TMJ disorders, osteoarthritis, trauma, tumour resection and congenital abnormalities, which are known to directly influence mandibular motion and loading. The objective of this systematic review was to critically investigate published literature on historic and contemporary measurement modalities used to quantify in vivo mandibular and TMJ kinematics in six degrees of freedom. The electronic databases of Scopus, Web of Science, Medline, Embase and Central were searched and 109 relevant articles identified. Publication quality was documented using a modified Downs and Black checklist. Axiography and ultrasonic tracking are commonly employed in the clinical setting due to their simplicity and capacity to rapidly acquire low-fidelity mandibular motion data. Magnetic and optoelectronic tracking have been used in combination with dental splints to produce higher accuracy measurements while minimising skin motion artefact, but at the expense of setup time and cost. Four-dimensional computed tomography provides direct 3D measurement of mandibular and TMJ motion while circumventing skin motion artefact entirely, but employs ionising radiation, is restricted to low sampling frequencies, and requires time-consuming image processing. Recent advances in magnetic tracking using miniature sensors adhered to the teeth in combination with intraoral scanning may facilitate rapid and high precision mandibular kinematics measurement in the clinical setting. The findings of this review will guide selection and application of mandibular and TMJ kinematic measurement for both clinical and research applications.
Assuntos
Côndilo Mandibular , Articulação Temporomandibular , Fenômenos Biomecânicos , Mandíbula , Amplitude de Movimento Articular , Articulação Temporomandibular/diagnóstico por imagemRESUMO
In vitro studies investigating the mechanical properties of dental reconstructions use various materials to replicate prepared teeth. However, no uniform recommendation exists as to which material is most suitable for standardized testing. The purpose of this study was to identify a material that resembles human dentin in fracture load tests. Sixteen human teeth were scanned with an intraoral scanner to obtain copies of the original crown morphology and were then prepared for crowns. Replica dies of the prepared teeth including the root morphology were fabricated with a Computer-aided design and computer-aided manufacturing (CAD/CAM) system and divided into four groups: (A) reinforced composite (RC); (B) human dentin (HD); (C) polymethyl methacrylate (PM); and (D) hybrid ceramic (HC). Sixty-four feldspar ceramic crowns were designed with the biocopy mode, fabricated with a CAD/CAM system, luted on the dies, and then with the roots embedded in polymethyl methacrylate. Care was taken to position all specimens of the same morphology identically. Thermo-mechanical load cycling was performed in a chewing simulator followed by fractural loading of the crowns. A mixed effect linear model was fitted to the data, and pairwise contrasts were estimated on the marginal means and corrected for multiple testing according to Tukey (α = 0.05). The means for fracture load (N) were 2435 N (95% CI (2162, 2709)) for hybrid ceramic, 1838 N (95% CI (1565, 2112)) for reinforced composite, 1670 N (95% CI (1396, 1943)) for human tooth and 1142 N (95% CI (868, 1415)) for polymethyl methacrylate abutment materials. Post-hoc pairwise contrasts revealed a statistically significant (p < 0.05) difference among all groups except for reinforced composite and human dentin (p = 0.76). The results indicate that the mechanical properties of abutment dies play a significant role for a possible substitution of natural teeth in in vitro studies.
RESUMO
The location of the terminal hinge axis of the temporomandibular joint is still a very wide-spread procedure in dentistry in order to replicate the movement in various articulator devices. Especially pantographic methods are claimed to provide accurate measurements and, additionally, are seen to be able to separate a pure rotation of the joint from a movement with an arbitrary combined shift and rotation. In the latter application, these methods were used in a lot of studies as a reference standard. The aim of this study was to analyze, whether common pantographic methods in general are able to distinguish between a pure rotation and a movement with rotational and translational portions. The mathematical proof of this analysis was done with theoretical kinematic considerations and compared with computer simulations. The results show for the first time that there exist combinations of rotational and translational movements of the temporomandibular joint which cannot be separated from pure rotational movements using actual pantographic methods. Even more, the consequence is a shifted location of the (combined) finite center (axis) of rotation in comparison to the true center (axis) of rotation: in case of a translational portion of only 1 mm, this is a displacement of around ±6 mm and, in case of 2 mm translation, a displacement of ±12 mm. This finding necessitates a critical reinterpretation of former studies using pantographic methods as a reference standard. Further, under some circumstances it may also affect the applicability of articulator concepts and the interpretation of functional signs.
Assuntos
Rotação , Articulação Temporomandibular/fisiologia , Fenômenos Biomecânicos , Simulação por Computador , Humanos , Mandíbula/fisiologia , MovimentoRESUMO
OBJECTIVES: The aim of this study was to test the fracture load of ceramic and composite three-unit full-contour fixed dental prostheses (FDPs) fabricated with additive and subtractive computer-aided design (CAD)/computer-aided manufacturing (CAM) technology. MATERIALS AND METHODS: A newly developed alveolar socket replica model for a three-unit FDP replacing one molar was used in this study. Five CAD/CAM materials were used for fabrication of three-unit FDPs (each n = 12). The subtractive CAD/CAM fabrication method was used for groups BC (BRILLIANT Crios), TC (Telio CAD), EX (e.max CAD), and TZ (inCoris TZI C), and the additive method was used for group 3D (els 3D resin even stronger). FDPs were adhesively seated to the abutment dies (PANAVIA V5 system). Thermomechanical loading was performed prior to fracture testing with a universal testing machine. The data for maximum fracture load values was analyzed with one-way ANOVA and post hoc Scheffé test (α = 0.05). RESULTS: All FDPs survived the thermomechanical loading test. Statistically significant differences were found for the fracture load of three-unit FDPs fabricated from different CAD/CAM materials (p < 0.05). The highest mean fracture load was found for group TZ (2099.5 ± 382.1 N). Group 3D showed the lowest mean fracture load (928.9 ± 193.8 N). Group BC performed statistically significantly differently from group 3D with a mean fracture load of 1494.8 ± 214.5 N (p < 0.05). CONCLUSIONS: Particle-filled composite resin CAD/CAM materials showed fracture load values within the range of ceramic materials with a specific indication of use for three-unit FDPs. CLINICAL RELEVANCE: Particle filled composite CAD/CAM materials may offer new treatment possibilities for the CAD/CAM workflow.
Assuntos
Desenho Assistido por Computador , Falha de Restauração Dentária , Cerâmica , Porcelana Dentária , Planejamento de Prótese Dentária , Análise do Estresse Dentário , Teste de Materiais , ZircônioRESUMO
BACKGROUND: The authors evaluated the local accuracy of intraoral scanning (IOS) systems for single-tooth preparation impressions with an in vitro setup. METHODS: The authors digitized a mandibular complete-arch model with 2 full-contour crowns and 2 multisurface inlay preparations with a highly accurate reference scanner. Teeth were made from zirconia-reinforced glass ceramic material to simulate toothlike optical behavior. Impressions were obtained either conventionally (PRESIDENT, Coltène) or digitally using the IOS systems TRIOS 3 and TRIOS 3 using insane scan speed mode (3Shape), Medit i500, Version 1.2.1 (Medit), iTero Element 2, Version 1.7 (Align Technology), CS 3600, Version 3.1.0 (Carestream Dental), CEREC Omnicam, Version 4.6.1, CEREC Omnicam, Version 5.0.0, and Primescan (Dentsply Sirona). Impressions were repeated 10 times per test group. Conventional (CO) impressions were poured with type IV gypsum and digitized with a laboratory scanner. The authors evaluated trueness and precision for preparation margin (MA) and preparation surface (SU) using 3-dimensional superimposition and 3-dimensional difference analysis method using (95% - 5%) / 2 percentile values. Statistical analysis was performed using Kruskal-Wallis test. Results were presented as median (interquartile range) values in micrometers. RESULTS: The authors found statistically significant differences for MA and SU among different test groups for both trueness and precision (P < .05). Median (interquartile range) trueness values ranged from 11.8 (2.0) µm (CO) up to 40.5 (10.9) µm (CEREC Omnicam, Version 5.0.0) for SU parameter and from 17.7 (2.6) µm (CO) up to 55.9 (15.5) µm (CEREC Omnicam, Version 5.0.0) for MA parameter. CONCLUSIONS: IOS systems differ in terms of local accuracy. Preparation MA had higher deviations compared with preparation SU for all test groups. PRACTICAL IMPLICATIONS: Trueness and precision values for both MA and SU of single-unit preparations are equal or close to CO impression for several IOS systems.
Assuntos
Técnica de Moldagem Odontológica , Modelos Dentários , Desenho Assistido por Computador , Arco Dental , Imageamento Tridimensional , Preparo do DenteRESUMO
OBJECTIVES: The use of computer-aided design/computer-aided manufacturing (CAD/CAM) technology in restorative dentistry has increased significantly and should consequently be taught more intensively at university dental schools. This study describes the evaluation of a new CAD/CAM teaching concept. METHODS: CAD/CAM technology was implemented into a 4th-year clinical student course according to Miller's pyramid principle. Fifty-eight students with no clinical experience participated in a 2-day theoretical and practical introductory course and rated its didactic outcome (Questionnaire 1). Students selected the fabrication method for indirect single tooth restorations during a 5-month patient treatment course. 54 conventional (e.max Press) and 68 CAD/CAM (Lava Ultimate) indirect Cerec-method restorations were fabricated and seated adhesively (Syntac, Variolink II). The success of the CAD/CAM integration was analyzed by the students, who were grouped according to their selected fabrication method (Questionnaire 2), as follows: Group A (CAD/CAM, n = 18); Group B (conventional and CAD/CAM, n = 17); Group C (conventional, n = 23). RESULTS: The questionnaire ratings were expressed as a percentage of the number of students' answers and are presented as diagrams. 95% of all the students in all the groups wanted CAD/CAM technology to be integrated into the subsequent (5th-year) clinical course. The rating for the CAD/CAM introductory course on a scale of 1 (very good) to 6 (poor) was 1.86 on average for the theoretical part, and 2.20 for the practical part. Statistically significant differences were found among the technology groupings (Pearson's chi-squared test, P < 0.05). CONCLUSIONS: CAD/CAM technology was highly welcomed by the 4th-year students and was introduced successfully into the clinical student course. Students tended to favor technology in accordance with the extent of its clinical application.
Assuntos
Desenho Assistido por Computador , Planejamento de Prótese Dentária , Humanos , EstudantesRESUMO
OBJECTIVE: Intraoral scanners (IOSs) are widely used for obtaining digital dental models directly from the patient. Additionally, improvements in IOSs are made from generation to generation. The aim of this study was to evaluate the accuracy of new and actual IOS devices for complete- and partial-arch dental impressions in an in vitro setup. MATERIALS AND METHODS: A custom maxillary complete-arch cast with teeth made from feldspar ceramic material was used as the reference cast and digitized with a reference scanner (ATOS III Triple Scan MV60). One conventional impression technique using polyvinylsiloxane (PVS) material (President) served as the control (CO), and eight different IOS devices comprising different hardware and software configurations (TRn: Trios 3; TRi: Trios 3 insane; CS: Carestream Dental CS 3600; MD: Medit i500; iT: iTero Element 2; OC4: Cerec Omnicam 4.6.1; OC5: Cerec Omnicam 5.0.0; PS: Primescan) were used to take complete-arch impressions from the reference cast. The impressions were repeated 10 times (n = 10) for each group. Conventional impressions were poured with type IV gypsum and digitized with a laboratory scanner (inEos X5). All datasets were obtained in standard tessellation language (STL) file format and cut to either complete-arch, anterior segment, or posterior segment areas for respective analysis. Values for trueness and precision for the respective areas were evaluated using a three-dimensional (3D) superimposition method with special 3D difference analysis software (GOM Inspect) using (90-10)/2 percentile values. Statistical analysis was performed using either one-way analysis of variance (ANOVA) or Kruskal-Wallis test (α = 0.05). Results are given as median and interquartile range [IQR] values in µm. RESULTS: Statistically significant differences were found between test groups for complete- and partial-arch impression methods in vitro (p < 0.05). Values ranged from 16.3 [2.8] µm (CO) up to 89.8 [26.1] µm (OC4) for in vitro trueness, and from 10.6 [3.8] µm (CO) up to 58.6 [38.4] µm (iT) for in vitro precision for the complete-arch methods. The best values for trueness of partial-arch impressions were found for the posterior segment, with 9.7 [1.2] µm for the conventional impression method (CO), and 21.9 [1.5] µm (PS) for the digital impression method. CONCLUSION: Within the limitations of this study, digital impressions obtained from specific IOSs are a valid alternative to conventional impressions for partial-arch segments. Complete-arch impressions are still challenging for IOS devices; however, certain devices were shown to be well within the required range for clinical quality. Further in vivo studies are needed to support these results.
Assuntos
Desenho Assistido por Computador , Arco Dental , Técnica de Moldagem Odontológica , Humanos , Imageamento Tridimensional , Modelos DentáriosRESUMO
STATEMENT OF PROBLEM: Complete dentures fabricated by computer-aided design and computer-aided manufacturing (CAD-CAM) techniques have become popular. The 2 principal CAD-CAM techniques, milling and rapid prototyping (3D printing), used in the fabrication of complete dentures have been reported to yield clinically acceptable results. However, clinical trials or in vitro studies that evaluated the accuracy of the 2 manufacturing techniques are lacking. PURPOSE: The purpose of this in vitro study was to compare the differences in trueness between the CAD-CAM milled and 3D-printed complete dentures. MATERIAL AND METHODS: Two groups of identical maxillary complete dentures were fabricated. A 3D-printed denture group (3DPD) (n=10) and a milled denture group (MDG) (n=10) from a reference maxillary edentulous model. The intaglio surfaces of the fabricated complete dentures were scanned at baseline using a laboratory scanner. The complete dentures were then immersed in an artificial saliva solution for a period of 21 days, followed by a second scan (after immersion in saliva). A third scan (after the wet-dry cycle) was then made after 21 days, during which the complete dentures were maintained in the artificial saliva solution during the day and stored dry at night. A purpose-built 3D comparison software program was used to analyze the differences in the trueness of the complete dentures. The analyses were performed for the entire intaglio surface and specific regions of interest: posterior crest, palatal vault, posterior palatal seal area, tuberosity, anterior ridge, vestibular flange, and mid-palatal raphae. Independent t tests, ANOVA, and post hoc tests were used for statistical analyses (α=.05). RESULTS: The trueness of the milled prostheses was significantly better than that of the rapid prototyping group with regard to the entire intaglio surface (P<.001), posterior crest (P<.001), palatal vault (P<.001), posterior palatal seal area (P<.001), tuberosity (P<.001), anterior ridge (baseline: P<.001; after immersion in saliva: P=.001; after the wet-dry cycle: P=.011), vestibular flange (P<.001), and mid-palatal raphae (P<.001). CONCLUSIONS: The CAD-CAM, milled complete dentures, under the present manufacturing standards, were superior to the rapidly prototyped complete dentures in terms of trueness of the intaglio surfaces. However, further research is needed on the biomechanical, clinical, and patient-centered outcome measures to determine the true superiority of one technique over the other with regard to fabricating complete dentures by CAD-CAM techniques.
Assuntos
Planejamento de Dentadura , Prótese Total , Desenho Assistido por Computador , Humanos , Maxila , Impressão TridimensionalRESUMO
PURPOSE: A wide variety of CAD/CAM materials are available for single-tooth restorations. CAD/CAM material characteristics are different and may influence CAM fabrication accuracy. There is no study investigating the influence of different CAD/CAM materials on the final fit of the restoration. The aim of this study was to evaluate the fit of endocrowns fabricated from different CAD/CAM materials using a new 3D evaluation method with an intraoral scanning system. The null hypothesis was that there are no significant differences for the fitting accuracy of different CAD/CAM materials. MATERIALS AND METHODS: Preparation for an endocrown was performed on a maxillary right first molar on a typodont, and restorations were fabricated with a chairside CAD/CAM system (CEREC Omnicam, MCXL). Three groups using three different CAD/CAM materials were established (each n = 10): zirconia-reinforced lithium silicate ceramic (Celtra Duo; CD), leucite-reinforced silicate ceramic (Empress CAD; EM), resin nanoceramic (Lava Ultimate; LU). A 3D digital measurement technique (OraCheck, Cyfex AG) using an intraoral scanner (CEREC Omnicam) was used to measure the difference in fit between the three materials for a master endocrown preparation. The preparation scan and the endocrown fit scan were matched with special difference analysis software OraCheck. Three areas were selected for fitting accuracy measurements: margin (MA), axial (AX), occlusal (OC). Statistical analysis was performed using 80% percentile, one-way ANOVA, and post-hoc Scheffé test. Significance level was set to p = 0.05. RESULTS: Results varied from best 88.9 ± 7.7 µm for marginal fit of resin nanoceramic restorations (LU_MA) to worst 182.3 ± 24.0 µm for occlusal fit of zirconia-reinforced lithium silicate restorations (CD_OC). Statistically significant differences were found both within and among the test groups. Group CD performed statistically significantly different from group LU for marginal fit (MA) and axial fit (AX) (p < 0.05). For occlusal fit (OC), no statistically significant differences were found within all three test groups (p > 0.05). Deviation pattern for differences was visually analyzed with a color-coded scheme for each restoration. CONCLUSIONS: Statistically significant differences were found for different CAD/CAM materials if the CAM procedure was identical. Within the limitations of this study, the choice of CAD/CAM material may influence the fitting accuracy of CAD/CAM-fabricated restorations.
Assuntos
Desenho Assistido por Computador , Coroas , Materiais Dentários/química , Planejamento de Prótese Dentária/métodos , Resinas Acrílicas , Silicatos de Alumínio , Cerâmica , Adaptação Marginal Dentária , Porcelana Dentária , Teste de Materiais , Maxila , Dente Molar , Propriedades de Superfície , ZircônioRESUMO
OBJECTIVES: Indirect CAD/CAM restorations can be fabricated using both subtractive and additive CAD/CAM technology. This study investigated the fracture load of crowns fabricated from three particle-filled composite CAD/CAM materials and one 3D-printed composite material. MATERIALS AND METHODS: Lava Ultimate, Cerasmart and Brilliant Crios were used as particle-filled composite CAD/CAM material and els-3D Harz as 3D-printed composite material. For each group, crowns with three different material thicknesses (0.5/1.0/1.5 mm) were fabricated. Control group was composed of ceramic-based CAD/CAM materials e.max CAD and Enamic. Totally, n = 180 crowns were fabricated and adhesively seated on SLA fabricated dies. Thermomechanical loading and fracture testing were performed. The data for fracture loading force were statistically analyzed by two-way ANOVA followed with multiple comparisons by post hoc Tukey's test (α = 0.05). RESULTS: In contrast to ceramics, all particle-filled composite crowns with 0.5-mm thickness survived fatigue testing. Forces varied statistically significantly. Brilliant Crios showed highest maximum loading force with 1580.4 ± 521.0 N (1.5 mm). Two-way ANOVA indicated that both the material and the thickness affected the fracture load (p < 0.05). CONCLUSIONS: Particle-filled composite resin CAD/CAM materials may have advantageous material characteristics compared to ceramic CAD/CAM materials for minimal restoration thicknesses. CLINICAL RELEVANCE: Composite-based CAD/CAM materials may offer new possibilities in minimally invasive restorative treatment concepts.