In Vitro Models Used in Cariology Mineralisation Research-A Review of the Literature.

BACKGROUND: Dental caries remains a significant global health problem. One of the fundamental mechanisms underlying the development and progression of dental caries is the dynamic process of demineralisation/remineralisation. In vitro models have played a critical role in advancing our understanding of this process and identifying potential interventions to prevent or arrest dental caries. This literature review aims to provide a structured oversight of in vitro mineralisation models which have been used to study the tooth demineralisation/remineralisation process. METHODS: Publications from 2019 to 2023 were screened to identify articles reporting the use of in vitro models to study the demineralisation/remineralisation of tooth caries. The included studies were methodologically assessed for their information on (i) substrate, (ii) lesion formation, and (iii) mineralisation models. RESULTS: The most reported substrates used in the studies were human teeth along with bovine incisors. Acetic/lactic buffers were the most common solutions to induce caries lesions. pH cycling was the most frequently used mineralisation model for simulating the daily change within the oral environment. This review discussed the advantages and limitations of various approaches. CONCLUSIONS: Standardisation of in vitro mineralisation models is crucial for enabling effective comparison between studies and advancing caries research.

A scoping review of the influence of clinical contaminants on bond strength in direct adhesive restorative procedures.

OBJECTIVE: Clinical contamination during direct adhesive restorative procedures can affect various adhesive interfaces differently and contribute to bulk failure of the restorations. This review aims to summarise the current knowledge on the influence of a variety of clinical contaminants on the bond strength at various adhesive interfaces during adhesive restorative procedures and identify gaps in the literature for future research. DATA AND SOURCES: An electronic database search was performed in PubMed and EMBASE to identify articles that investigated the influence of contaminants on direct restorative bonding procedures. A data-charting form was developed by two researchers to capture the key characteristics of each eligible study. STUDY SELECTION: The initial search yielded 1,428 articles. Fifty-seven articles published between 1 Jan 2007 and 25 Oct 2023 were included in the final review. Thirty-three of the articles examined the influence of saliva contamination, twelve articles examined the influence of blood contamination, and twenty-five articles examined the influence of other contaminants. CONCLUSION: Saliva contamination exerted less influence on the decrease in bond strength when self-etch systems were used, compared to when etch-and-rinse systems were used. Blood contamination adversely affected the bond strength at the interface between resin composite and dentine, and resin composite and resin-modified glass ionomer cement. Treating contaminated surfaces with water spray for 10-30 s followed by air drying could be effective in recovering bond strength following saliva and blood contamination. CLINICAL SIGNIFICANCE: This scoping review provides a valuable overview of the range of potential clinical contaminants that can influence the bond strength between different interfaces in direct adhesive restorative procedures. Additionally, it identifies potential decontamination protocols that can be followed to restore and enhance bond strength.

Preventive dental erosion with silver diamine fluoride: An in vitro study.

OBJECTIVES: To evaluate the erosion preventive effect of 38 % silver diamine fluoride (SDF) solution in enamel and dentin of human permanent teeth. METHODS: Ninety enamel and ninety dentin blocks were prepared from permanent molars and allocated into three groups. Gp-SDF received a one-off application of 38 % SDF solution. Gp-SNF received a one-off application of a solution containing 800 ppm stannous chloride and 500 ppm fluoride. Gp-DW received a one-off application of deionized water. The blocks were submitted to acid challenge at pH 3.2, 2 min, 5 times/day for 7 days. All blocks were immersed in human saliva between cycles for one hour. The crystal characteristics, percentage of surface microhardness loss (%SMHL), surface loss, and elemental analysis and surface morphology were examined by X-ray diffraction (XRD), microhardness test, non-contact profilometry, and energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM), respectively. Data of%SMHL and surface loss were analyzed by one-way ANOVA. RESULTS: XRD spectra revealed that fluorapatite and silver compounds formed in Gp-SDF, while fluorapatite and stannous compounds formed in Gp-SNF. Gp-DW presented only hydroxyapatite. The median (interquartile range) of%SMHL in Gp-SDF, Gp-SNF and Gp-DW were 27.86(3.66), 43.41(2.45), and 46.40(3.54) in enamel (p< 0.001), and 14.21(1.57), 27.99(1.95), and 33.18(1.73) in dentin, respectively (p < 0.001). The mean (standard deviation, µm) of surface loss of Gp-SDF, Gp-SNF, and Gp-DW were 2.81(0.59), 4.28(0.67), and 4.63(0.64) in enamel (p < 0.001) and 4.13(0.69), 6.04(0.61), and 7.72(0.66) in dentin, respectively (p < 0.001). SEM images exhibited less enamel corruption and more dentinal tubular occlusion in Gp-SDF compared to Gp-SNF and Gp-DW. EDS analysis showed silver was detected in Gp-SDF while stannous was detected in the dentin block of Gp-SNF. CONCLUSION: 38 % SDF yielded superior results in protecting enamel and dentin blocks from dental erosion compared to SNF and DW. CLINICAL SIGNIFICANCE: Topical application of 38 % SDF is effective in preventing dental erosion in human enamel and dentin.

The effect of combined use of resin infiltration with different bioactive calcium phosphate-based approaches on enamel white spot lesions: An in vitro study.

OBJECTIVES: This in vitro study aimed to evaluate the effect of resin infiltration combined with casein phosphopeptide-amorphous calcium phosphate with fluoride (CPP-ACPF) or bioactive glass (BAG) on the stability of enamel white spot lesions (WSLs) treatment. MATERIALS AND METHODS: Eighty-four enamel blocks were prepared from the buccal surfaces of sound human premolars. All enamel blocks were placed in a demineralisation solution for 3 days to establish the artificial enamel WSLs. Enamel blocks with WSLs were randomly divided into three groups (n = 28 each group): RI/B: one-off resin infiltration followed by twice daily BAG treatment; RI/C: one-off resin infiltration followed by twice daily CPP-ACPF treatment; RI: one-off resin infiltration treatment only (as control) and subjected to pH cycling for 7 days. Surface morphology, elemental analysis, crystal characteristics, surface roughness and microhardness of enamel surfaces were investigated by scanning electron microscopy and energy-dispersive spectrometry observation, X-ray diffraction (XRD), atomic force microscope and Vickers' hardness testing, respectively. RESULTS: Mean values of the surface roughness (mean±standard deviation (nm)) were 24.52±5.07, 27.39±5.87 and 34.36±4.55 for groups RI/B, RI/C and RI respectively (p = 0.003). The calcium to phosphate ratios were 1.32±0.16, 1.22±0.26 and 0.69±0.24 for groups RI/B, RI/C and RI respectively (p < 0.001). XRD revealed apatite formation in all three groups. The mean enamel surface microhardness (kg/mm2) of the groups were 353.93±28.49, 339.00±27.32 and 330.38±22.55 for groups RI/B, RI/C and RI respectively (p = 0.216). CONCLUSIONS: Resin infiltration combined with CPP-ACPF or BAG remineralisation appears to improve the surface properties of WSLs. CLINICAL SIGNIFICANCE: The combination of resin infiltration and CPP-ACPF/BAG remineralisation may be a potential treatment for the management of the WSLs.

Combined Effect of a Bioinspired Self-Assembling Peptide and Fluoride Varnish on Remineralisation of Artificial Early Enamel Caries Lesion: An in vitro Study.

INTRODUCTION: This study aimed to investigate the remineralisation effect of combined use of a bioinspired self-assembling peptide (P26) and fluoride varnish on artificial early enamel caries lesions. METHODS: Bovine enamel blocks with artificial early enamel caries lesions were prepared. The blocks were randomly allocated to four experimental groups to receive the following treatments: A = P26 + fluoride varnish, B = P26, C = fluoride varnish, and D. distilled water (negative control). The treated blocks were subjected to pH cycling. Enamel blocks were collected at time points of 7 days (d7) and 21 days (d21). The mineral gain, elemental analysis and crystal characteristics of the caries lesion were assessed by micro-computed tomography, scanning electron microscopy with energy dispersive X-ray and X-ray diffraction (XRD), respectively. RESULTS: The mean ± standard deviation of mineral gain of group A to D were 17.4 ± 4.2%, 10.7 ± 2.2%, 10.1 ± 1.2%, and 6.8 ± 0.5% at d7, respectively, and 15.2 ± 2.6%, 8.7 ± 3.1%, 9.7 ± 1.2%, and 7.8 ± 2.3% at d21, respectively. A significant higher mineral gain was observed in group A when compared to other groups at both d7 and d21 (p < 0.05). The calcium-to-phosphate ratio remained consistent across all groups, ranging between 1.2 and 1.4. XRD analysis indicated that crystal composition on the surfaces was apatite for all groups. CONCLUSION: In conclusion, the present study provided a first indication of better remineralisation effects of the combined use of the bioinspired self-assembling peptide P26 and fluoride varnish compared to the effects of the respective individual uses of P26 or fluoride varnish.

Development of a Novel Peptide with Antimicrobial and Mineralising Properties for Caries Management.

The purpose of the study is to develop a novel peptide for caries management. Gallic-Acid-Polyphemusin-I (GAPI) was synthesised by grafting Polyphemusin I (PI) and gallic acid (GA). Biocompatibility was evaluated using a Cell Counting Kit-8 Assay. Antimicrobial properties were assessed using minimum inhibitory concentration (MIC) and minimum bactericidal/fungicidal concentration (MBC/MFC). The bacterial and fungal morphology after GAPI treatment was investigated using transmission electron microscopy (TEM). The architecture of a consortium biofilm consisting of Streptococcus mutans, Lacticaseibacillus casei and Candida albicans was evaluated using scanning electron microscopy (SEM) and confocal laser scanning microscopy. The growth kinetics of the biofilm was examined using a propidium monoazide-quantitative polymerase chain reaction. The surface and calcium-to-phosphorus molar ratio of GAPI-treated enamel after pH cycling were examined with SEM and energy-dispersive X-ray spectroscopy. Enamel crystal characteristics were analysed using X-ray diffraction. Lesion depths representing the enamel's mineral loss were assessed using micro-computed tomography. The MIC of GAPI against S. mutans, L. casei and C. albicans were 40 µM, 40 µM and 20 µM, respectively. GAPI destroyed the biofilm's three-dimensional structure and inhibited the growth of the biofilm. SEM showed that enamel treated with GAPI had a relatively smooth surface compared to that treated with water. The calcium-to-phosphorus molar ratio of enamel treated with GAPI was higher than that of the control. The lesion depths and mineral loss of the GAPI-treated enamel were less than the control. The crystallinity of the GAPI-treated enamel was higher than the control. This study developed a biocompatible, mineralising and antimicrobial peptide GAPI, which may have potential as an anti-caries agent.

Antibacterial Properties of the Antimicrobial Peptide Gallic Acid-Polyphemusin I (GAPI).

A novel antimicrobial peptide, GAPI, has been developed recently by grafting gallic acid (GA) to polyphemusin I (PI). The objective of this study was to investigate the antibacterial effects of GAPI on common oral pathogens. This laboratory study used minimum inhibitory concentrations and minimum bactericidal concentrations to assess the antimicrobial properties of GAPI against common oral pathogens. Transmission electron microscopy was used to examine the bacterial morphology both before and after GAPI treatment. The results showed that the minimum inhibitory concentration ranged from 20 µM (Lactobacillus rhamnosus) to 320 µM (Porphyromonas gingivalis), whereas the minimum bactericidal concentration ranged from 80 µM (Lactobacillus acidophilus) to 640 µM (Actinomyces naeslundii, Enterococcus faecalis, and Porphyromonas gingivalis). Transmission electron microscopy showed abnormal curvature of cell membranes, irregular cell shapes, leakage of cytoplasmic content, and disruption of cytoplasmic membranes and cell walls. In conclusion, the GAPI antimicrobial peptide is antibacterial to common oral pathogens, with the potential to be used to manage oral infections.

The Anti-Caries Effects of a Novel Peptide on Dentine Caries: An In Vitro Study.

This study aimed to investigate the antibiofilm and remineralising effects of peptide GAPI on artificial dentin caries. After creating artificial carious lesions, eighty dentine blocks were randomly assigned for treatment twice daily with GAPI (GAPI group) or deionised water (control group). Both groups underwent a 7-day biochemical cycle. Scanning electron microscopy (SEM) showed S. mutans with damaged structures that partially covered the dentine in the GAPI group. The dead-live ratios for the GAPI and control groups were 0.77 ± 0.13 and 0.37 ± 0.09 (p < 0.001). The log colony-forming units for the GAPI and control groups were 7.45 ± 0.32 and 8.74 ± 0.50 (p < 0.001), respectively. The lesion depths for the GAPI and control groups were 151 ± 18 µm and 214 ± 15 µm (p < 0.001), respectively. The mineral losses for the GAPI and control groups were 0.91 ± 0.07 gHAcm-3 and 1.01 ± 0.07 gHAcm-3 (p = 0.01), respectively. The hydrogen-to-amide I ratios for the GAPI and control groups were 2.92 ± 0.82 and 1.83 ± 0.73 (p = 0.014), respectively. SEM micrographs revealed fewer exposed dentine collagen fibres in the GAPI group compared to those in the control group. Furthermore, X-ray diffraction (XRD) patterns indicated that the hydroxyapatite in the GAPI group was more crystallised than that in the control group. This study demonstrated GAPI's antibiofilm and remineralising effects on artificial dentin caries.

The effect of different ferrule heights and crown-to-root ratios on fracture resistance of endodontically-treated mandibular premolars restored with fiber post or cast metal post system: an in vitro study.

BACKGROUND: This study aimed to investigate the effects of different ferrule heights and crown-to-root ratios on the fracture resistance of endodontically-treated premolars restored with fiber post or cast metal post system. METHODS: Eighty extracted human mandibular first premolars with single root canal were treated endodontically and cut from 2.0 mm above the buccal cemento-enamel junction, to create horizontal residual roots. The roots were randomly divided into two groups. The roots in group FP were restored with a fiber post-and-core system, while the roots in group MP were restored with a cast metal post-and-core system. Each group was divided into five subgroups with different ferrule heights (0: no ferrule; 1: 1.0 mm ferrule; 2: 2.0 mm ferrule; 3: 3.0 mm ferrule; 4: 4.0 mm ferrule). All specimens were subsequently restored with metal crowns and embedded in acrylic resin blocks. The crown-to-root ratios of the specimens were controlled at approximately 0.6, 0.8, 0.9, 1.1, and 1.3 of the five subgroups, respectively. Fracture strengths and fracture patterns of the specimens were tested and recorded by a universal mechanical machine. RESULTS: Mean fracture strengths (mean ± standard deviation (kN)) of FP/0 to FP/4 and MP/0 to MP/4 were: 0.54 ± 0.09, 1.03 ± 0.11, 1.06 ± 0.17, 0.85 ± 0.11; 0.57 ± 0.10, 0.55 ± 0.09, 0.88 ± 0.13, 1.08 ± 0.17, 1.05 ± 0.18 and 0.49 ± 0.09, respectively. Two-way ANOVA revealed significant effects of different ferrule heights and crown-to-root ratios on the fracture resistance (P < 0.001), but no difference in fracture resistance between two post-and-core systems (P = 0.973). The highest fracture strengths of the specimen were found with the ferrule length of 1.92 mm in group FP and 2.07 mm in group MP, the crown-to-root ratio of which in 0.90 and 0.92 respectively., there is a significant difference in fracture patterns among the groups(P < 0.05). CONCLUSIONS: When a certain height of ferrule is prepared and a cast metal or fiber post-and-core system is restored for the residual root, the clinical crown-to-root ratio of the tooth after restoration should be kept within 0.90 to 0.92, so as to improve the fracture resistance of endodontically-treated mandibular first premolars.

Bioactive Materials for Caries Management: A Literature Review.

Researchers have developed novel bioactive materials for caries management. Many clinicians also favour these materials, which fit their contemporary practice philosophy of using the medical model of caries management and minimally invasive dentistry. Although there is no consensus on the definition of bioactive materials, bioactive materials in cariology are generally considered to be those that can form hydroxyapatite crystals on the tooth surface. Common bioactive materials include fluoride-based materials, calcium- and phosphate-based materials, graphene-based materials, metal and metal-oxide nanomaterials and peptide-based materials. Silver diamine fluoride (SDF) is a fluoride-based material containing silver; silver is antibacterial and fluoride promotes remineralisation. Casein phosphopeptide-amorphous calcium phosphate is a calcium- and phosphate-based material that can be added to toothpaste and chewing gum for caries prevention. Researchers use graphene-based materials and metal or metal-oxide nanomaterials as anticaries agents. Graphene-based materials, such as graphene oxide-silver, have antibacterial and mineralising properties. Metal and metal-oxide nanomaterials, such as silver and copper oxide, are antimicrobial. Incorporating mineralising materials could introduce remineralising properties to metallic nanoparticles. Researchers have also developed antimicrobial peptides with mineralising properties for caries prevention. The purpose of this literature review is to provide an overview of current bioactive materials for caries management.

Peptide Designs for Use in Caries Management: A Systematic Review.

The objective of this study was to review the design methods that have been used to create peptides for use in caries management. Two independent researchers systematically reviewed many in vitro studies in which peptides were designed for use in caries management. They assessed the risk of bias in the included studies. This review identified 3592 publications, of which 62 were selected. Forty-seven studies reported 57 antimicrobial peptides. Among them, 31 studies (66%, 31/47) used the template-based design method; 9 studies (19%, 9/47) used the conjugation method; and 7 studies (15%, 7/47) used other methods, such as the synthetic combinatorial technology method, the de novo design method and cyclisation. Ten studies reported mineralising peptides. Seven of these (70%, 7/10) used the template-based design method, two (20%, 2/10) used the de novo design method, and one study (10%, 1/10) used the conjugation method. In addition, five studies developed their own peptides with antimicrobial and mineralising properties. These studies used the conjugation method. Our assessment for the risk of bias in the 62 reviewed studies showed that 44 publications (71%, 44/62) had a medium risk and that 3 publications had a low risk (5%, 3/62). The two most common methods for developing peptides for use in caries management that were used in these studies were the template-based design method and the conjugation method.

Potential Beneficial Effects of Hydroxyapatite Nanoparticles on Caries Lesions In Vitro-A Review of the Literature.

Dental caries is one of the most common human diseases which can occur in both primary and permanent dentitions throughout the life of an individual. Hydroxyapatite is the major inorganic component of human teeth, consequently, nanosized hydroxyapatite (nHAP) has recently attracted researchers' attention due to its unique properties and potential for caries management. This article provides a contemporary review of the potential beneficial effects of nHAP on caries lesions demonstrated in in vitro studies. Data showed that nHAP has potential to promote mineralization in initial caries, by being incorporated into the porous tooth structure, which resulted from the caries process, and subsequently increased mineral content and hardness. Notably, it is the particle size of nHAP which plays an important role in the mineralization process. Antimicrobial effects of nHAP can also be achieved by metal substitution in nHAP. Dual action property (mineralizing and antimicrobial) and enhanced chemical stability and bioactivity of nHAP can potentially be obtained using metal-substituted fluorhydroxyapatite nanoparticles. This provides a promising synergistic strategy which should be explored in further clinical research to enable the development of dental therapeutics for use in the treatment and management of caries.

A comparative study of two chemical models for creating subsurface caries lesions on aprismatic and prismatic enamel.

PURPOSE: To investigate the mineral density and lesion depth of artificial caries lesions on aprismatic enamel and prismatic enamel created by lactic acid and acetic acid buffers. METHODS: Forty bovine enamel blocks were allocated to: aprismatic enamel (Group A) and prismatic enamel (Group C) in acetic acid buffer for 192 h and aprismatic enamel (Group B) and prismatic enamel (Group D) in lactic acid buffer for 96 h. The mineral loss and lesion depth were measured using micro-computed tomography. RESULTS: A significant difference (P = 0.01) was observed in the mineral loss (%) in the lesions on aprismatic enamel and prismatic enamel treated with lactic acid buffer while no significant difference (P = 0.51) was observed in the mineral loss (%) in the lesions on aprismatic enamel and prismatic enamel treated with acetic acid buffer. No significant difference was noted in the mean lesion depth of lesions on aprismatic enamel and prismatic enamel treated with acetic acid and lactic acid buffers (P > 0.05). CONCLUSION: Aprismatic enamel and prismatic enamel have similar mineral loss in acetic acid while prismatic enamel showed more mineral loss compared to aprismatic enamel in lactic acid.

Growing Global Research Interest in Antimicrobial Peptides for Caries Management: A Bibliometric Analysis.

Objective: Researchers are studying the use of antimicrobial peptides as functional biomaterials to prevent and treat dental caries. This study aims to investigate the global research interest in antimicrobial peptides for caries management. Methods: Two independent investigators systematically searched with keywords ('Caries' OR 'Dental caries') AND ('Antimicrobial peptide' OR 'AMP' OR 'Statherin' OR 'Histatin' OR 'Defensin' OR 'Cathelicidin') on Web of Science, PubMed and Scopus. They removed duplicate publications and screened the titles and abstracts to identify relevant publications. The included publications were summarized and classified as laboratory studies, clinical trials or reviews. The citation count and citation density of the three publication types were compared using a one-way analysis of variance. The publications' bibliometric data were analyzed using the Bibliometrix program. Results: This study included 163 publications with 115 laboratory studies (71%), 29 clinical trials (18%) and 19 reviews (11%). The number of publications per year have increased steadily since 2002. The citation densities (mean ± SD) of laboratory study publications (3.67 ± 2.73) and clinical trial publications (2.63 ± 1.85) were less than that of review articles (5.79 ± 1.27) (p = 0.002). The three publication types had no significant difference in citation count (p = 0.54). Most publications (79%, 129/163) reported the development of a novel antimicrobial peptide. China (52/163, 32%) and the US (29/163, 18%) contributed to 50% (81/163) of the publications. Conclusion: This bibliometric analysis identified an increasing trend in global interest in antimicrobial peptides for caries management since 2002. The main research topic was the development of novel antimicrobial peptides. Most publications were laboratory studies, as were the three publications with the highest citation counts. Laboratory studies had high citation counts, whereas reviews had high citation density.

In Vitro Studies of Graphene for Management of Dental Caries and Periodontal Disease: A Concise Review.

Graphene is a single-layer two-dimensional carbon-based nanomaterial. It presents as a thin and strong material that has attracted many researchers' attention. This study provides a concise review of the potential application of graphene materials in caries and periodontal disease management. Pristine or functionalized graphene and its derivatives exhibit favorable physicochemical, mechanical, and morphological properties applicable to biomedical applications. They can be activated and functionalized with metal and metal nanoparticles, polymers, and other small molecules to exhibit multi-differentiation activities, antimicrobial activities, and biocompatibility. They were investigated in preventive dentistry and regenerative dentistry. Graphene materials such as graphene oxide inhibit cariogenic microbes such as Streptococcus mutans. They also inhibit periodontal pathogens that are responsible for periodontitis and root canal infection. Graphene-fluorine promotes enamel and dentin mineralization. These materials were also broadly studied in regenerative dental research, such as dental hard and soft tissue regeneration, as well as periodontal tissue and bone regeneration. Graphene oxide-based materials, such as graphene oxide-fibroin, were reported as promising in tissue engineering for their biocompatibility, bioactivity, and ability to enhance cell proliferation properties in periodontal ligament stem cells. Laboratory research showed that graphene can be used exclusively or by incorporating it into existing dental materials. The success of laboratory studies can translate the application of graphene into clinical use.

Effect of strontium-doped bioactive glass-ceramic containing toothpaste on prevention of artificial dentine caries formation: an in vitro study.

BACKGROUD: Root caries in aging population was prevalent worldwide. Due to the absence of enamel and specific structure of dentine, bacteria are able to penetrate further into dentine at an earlier stage of lesion development. The aim of this study was to investigate the effect of adding of a strontium-doped bioactive glass-ceramic (HX-BGC) to a fluoride-free toothpaste on prevention of formation of artificial dentine caries. METHODS: Thirty-six human tooth specimens were allocated to three groups (n = 12 per group). Group 1 treated with slurry containing a fluoride-free toothpaste and 5% HX-BGC, Group 2 was treated with fluoride-free toothpaste slurry, and Group 3 received deionized water as a negative control. The specimens were subjected to four cycles (15 h demineralization and 8 h remineralization for one cycle) of biochemical cycling. A mixed suspension of five bacteria species (Streptococcus mutans, Streptococcus sobrinus, Lactobacillus acidophilus, Lactobacillus rhamnosus, and Actinomyces naeslundii) were prepared in brain heart infusion broth with 5% sucrose and used as acidic challenge in biochemical cycling. Subsequently, surface morphology of the dentine lesion was assessed by scanning electron microscopy, while the lesion depths and mineral loss were assessed by micro-computed tomography. RESULTS: The mean lesion depths in dentine in Groups 1 to 3 were 87.79 ± 16.99 µm, 101.06 ± 10.04 µm and 113.60 ± 16.36 µm, respectively (p = 0.002). The mean amounts of mineral loss in Groups 1 to 3 were 0.82 ± 0.10 g/cm3, 0.89 ± 0.09 g/cm3 and 0.96 ± 0.11 g/cm3, respectively (p = 0.016). No obvious differences in the surface morphology were seen among the groups. CONCLUSION: Addition of strontium-doped bioactive glass-ceramic to fluoride-free toothpaste has potential to reduce formation of dentine lesions.

Effect of Er:YAG laser irrigation with different etching modes on the push-out bond strength of fiber posts to the root dentine.

The objective of this study was to evaluate the effect of Er:YAG laser irrigation on the push-out bond strength of fiber posts to the root dentine. Sixty extracted human mandibular first premolars were collected and decoronated. The residual roots received endodontic treatment. The treated roots were randomly divided into three groups according to different irrigation protocols: group LAI (Er:YAG laser-activated irrigation), group PUI (passive ultrasonic irrigation, positive control), and group CSI (conventional syringe irrigation, negative control) (n = 20). Each group was divided into two subgroups, either total-etching modes or self-etching modes (n = 10). After fiber post restoration, all roots were sectioned into seven 1.0-mm-thick slices. The slices received a push-out test by a universal test machine. The resin tag on the segments' bonding interfaces was observed by scanning electron microscope. There were significant differences in the effects of the irrigation method, bonding modes, and root regions on the push-out bond strength among the groups (p < 0.05). The specimens with Er:YAG laser-activated irrigation and self-etching mode showed significantly the highest bonding strength (p < 0.001). The lengths and densities of resin tags in group PUI or group LAI with self-etching modes were longer than those in group CSI with total-etching modes. The laser-activated irrigation with self-etching modes improved the bond strength of fiber post to root dentine compared to the passive ultrasonic irrigation or conventional syringe irrigation with total or self-etching modes.

Exploration and preliminary clinical investigation of an adhesive approach for primary tooth restoration.

The current study aims to investigate a suitable adhesive for primary tooth enamel. Shear bond strength (SBS) of primary teeth and the length of resin protrusion were analyzed using one-way ANOVA with Bonferroni multiple comparison tests after etching with 35% H 3PO 4. SBS and marginal microleakage tests were conducted with Single Bond Universal (SBU)/Single Bond 2 (SB2) adhesives with or without pre-etching using a nonparametric Kruskal-Wallis test. Clinical investigations were performed to validate the adhesive for primary teeth restoration using Chi-square tests. Results showed that the SBS and length of resin protrusion increased significantly with the etching time. Teeth in the SBU with 35% H 3PO 4 pre-etching groups had higher bond strength and lower marginal microleakage than those in the SB2 groups. Mixed fractures were more common in the 35% H 3PO 4 etched 30 s + SB2/SBU groups. Clinical investigations showed significant differences between the two groups in cumulative retention rates at the 6-, 12- and 18-month follow-up evaluations, as well as in marginal adaptation, discoloration, and secondary caries at the 12- and 18-month follow-up assessments. Together, pre-etching primary teeth enamel for 30 s before SBU treatment improved clinical composite resin restoration, which can provide a suitable approach for restoration of primary teeth.

Efficacy of the dual-action GA-KR12 peptide for remineralising initial enamel caries: an in vitro study.

OBJECTIVE: To investigate the antibiofilm and remineralising effects of the dual-action peptide GA-KR12 on artificial enamel caries. MATERIALS AND METHODS: Enamel blocks with artificial caries were treated with sterilised deionised water as control or GA-KR12. The blocks underwent biochemical cycling with Streptococcus mutans for 3 weeks. The architecture, viability, and growth kinetics of the biofilm were determined, respectively, by scanning electron microscopy (SEM), confocal laser scanning microscopy, and quantitative (culture colony-forming units, CFUs). The mineral loss, calcium-to-phosphorus ratio, surface morphology, and crystal characteristics of the enamel surface were determined, respectively, using micro-computed tomography, energy dispersive spectroscopy, SEM, and X-ray diffraction (XRD). RESULTS: SEM showed confluent growth of S. mutans in the control group but not in the GA-KR12-treated group. The dead-to-live ratios of the control and GA-KR12-treated groups were 0.42 ± 0.05 and 0.81 ± 0.08, respectively (p < 0.001). The log CFUs of the control and GA-KR12-treated groups were 8.15 ± 0.32 and 6.70 ± 0.49, respectively (p < 0.001). The mineral losses of the control and GA-KR12-treated groups were 1.39 ± 0.09 gcm-3 and 1.19 ± 0.05 gcm-3, respectively (p < 0.001). The calcium-to-phosphorus molar ratios of the control and GA-KR12-treated groups were 1.47 ± 0.03 and 1.57 ± 0.02, respectively (p < 0.001). A uniformly remineralised prismatic pattern on enamel blocks was observed in the GA-KR12-treated but not in the control group. The hydroxyapatite in the GA-KR12-treated group was better crystallised than that in the control group. CONCLUSION: The dual-action peptide GA-KR12 inhibited the growth of S. mutans biofilm and promoted the remineralisation of enamel caries. CLINICAL RELEVANCE: GA-KR12 potentially is applicable for managing enamel caries.