RESUMO
BACKGROUND: Augmented reality (AR) systems are currently being explored by a broad spectrum of industries, mainly for improving point-of-care access to data and images. Especially in surgery and especially for timely decisions in emergency cases, a fast and comprehensive access to images at the patient bedside is mandatory. Currently, imaging data are accessed at a distance from the patient both in time and space, i.e., at a specific workstation. Mobile technology and 3-dimensional (3D) visualization of radiological imaging data promise to overcome these restrictions by making bedside AR feasible. METHODS: In this project, AR was realized in a surgical setting by fusing a 3D-representation of structures of interest with live camera images on a tablet computer using marker-based registration. The intent of this study was to focus on a thorough evaluation of AR. Feasibility, robustness, and accuracy were thus evaluated consecutively in a phantom model and a porcine model. Additionally feasibility was evaluated in one male volunteer. RESULTS: In the phantom model (n = 10), AR visualization was feasible in 84% of the visualization space with high accuracy (mean reprojection error ± standard deviation (SD): 2.8 ± 2.7 mm; 95th percentile = 6.7 mm). In a porcine model (n = 5), AR visualization was feasible in 79% with high accuracy (mean reprojection error ± SD: 3.5 ± 3.0 mm; 95th percentile = 9.5 mm). Furthermore, AR was successfully used and proved feasible within a male volunteer. CONCLUSIONS: Mobile, real-time, and point-of-care AR for clinical purposes proved feasible, robust, and accurate in the phantom, animal, and single-trial human model shown in this study. Consequently, AR following similar implementation proved robust and accurate enough to be evaluated in clinical trials assessing accuracy, robustness in clinical reality, as well as integration into the clinical workflow. If these further studies prove successful, AR might revolutionize data access at patient bedside.
Assuntos
Imageamento Tridimensional , Sistemas Automatizados de Assistência Junto ao Leito , Cirurgia Assistida por Computador/métodos , Animais , Estudos de Viabilidade , Humanos , Imageamento por Ressonância Magnética , Masculino , Modelos Animais , Imagens de Fantasmas , Projetos Piloto , Estudos Prospectivos , Suínos , Tomografia Computadorizada por Raios XRESUMO
BACKGROUND: Navigation systems have the potential to facilitate intraoperative orientation and recognition of anatomical structures. Intraoperative accuracy of navigation in thoracoabdominal surgery depends on soft tissue deformation. We evaluated esophageal motion caused by respiration and pneumoperitoneum in a porcine model for minimally invasive esophagectomy. METHODS: In ten pigs (20-34 kg) under general anesthesia, gastroscopic hemoclips were applied to the cervical (CE), high (T1), middle (T2), and lower thoracic (T3) level, and to the gastroesophageal junction (GEJ) of the esophagus. Furthermore, skin markers were applied. Three-dimensional (3D) and four-dimensional (4D) computed tomography (CT) scans were acquired before and after creation of pneumoperitoneum. Marker positions and lung volumes were analyzed with open source image segmentation software. RESULTS: Respiratory motion of the esophagus was higher at T3 (7.0 ± 3.3 mm, mean ± SD) and GEJ (6.9 ± 2.8 mm) than on T2 (4.5 ± 1.8 mm), T1 (3.1 ± 1.8 mm), and CE (1.3 ± 1.1 mm). There was significant motion correlation in between the esophageal levels. T1 motion correlated with all other esophagus levels (r = 0.51, p = 0.003). Esophageal motion correlated with ventilation volume (419 ± 148 ml) on T1 (r = 0.29), T2 (r = 0.44), T3 (r = 0.54), and GEJ (r = 0.58) but not on CE (r = - 0.04). Motion correlation of the esophagus with skin markers was moderate to high for T1, T2, T3, GEJ, but not evident for CE. Pneumoperitoneum led to considerable displacement of the esophagus (8.2 ± 3.4 mm) and had a level-specific influence on respiratory motion. CONCLUSIONS: The position and motion of the esophagus was considerably influenced by respiration and creation of pneumoperitoneum. Esophageal motion correlated with respiration and skin motion. Possible compensation mechanisms for soft tissue deformation were successfully identified. The porcine model is similar to humans for respiratory esophageal motion and can thus help to develop navigation systems with compensation for soft tissue deformation.
Assuntos
Esofagectomia/métodos , Esôfago/diagnóstico por imagem , Procedimentos Cirúrgicos Minimamente Invasivos/métodos , Movimentos dos Órgãos , Pneumoperitônio Artificial , Respiração , Tomografia Computadorizada por Raios X , Animais , Junção Esofagogástrica/diagnóstico por imagem , Junção Esofagogástrica/fisiologia , Esôfago/fisiologia , Tomografia Computadorizada Quadridimensional , Imageamento Tridimensional , Modelos Animais , Movimento (Física) , Movimento , SuínosRESUMO
AIM: To perform a quantitative, volumetric analysis of therapeutic effects of trans-arterial chemoembolization (TACE) in hepatocellular carcinoma (HCC) patients. PATIENTS AND METHODS: Entire tumor volume and a subset of hypervascular tumor portions were analyzed pre- and post-TACE in magnetic resonance imaging datasets of 22 HCC patients using a semi-automated segmentation and evaluation tool from the Medical Imaging Interaction Toolkit. Results were compared to mRECIST measurements and inter-reader variability was assessed. RESULTS: Mean total tumor volume increased statistical significantly after TACE (84.6 ml pre- vs. 97.1 ml post-TACE, p=0.03) while hypervascular tumor volume decreased from 9.1 ml pre- to 3.7 ml post-TACE (p=0.0001). Likewise, mRECIST diameters decreased significantly after therapy (44.2 vs. 15.4 mm). In the inter-reader assessment, overlap errors were 12.3-17.7% for entire and 36.3-64.2% for the enhancing tumor volume. CONCLUSION: Quantification of therapeutic changes after TACE therapy is feasible using a semi-automated segmentation and evaluation tool. Following TACE, hypervascular tumor volume decreases significantly.
Assuntos
Carcinoma Hepatocelular/terapia , Quimioembolização Terapêutica , Neoplasias Hepáticas/terapia , Imageamento por Ressonância Magnética , Idoso , Idoso de 80 Anos ou mais , Carcinoma Hepatocelular/diagnóstico por imagem , Carcinoma Hepatocelular/patologia , Feminino , Humanos , Neoplasias Hepáticas/diagnóstico por imagem , Neoplasias Hepáticas/patologia , Masculino , Pessoa de Meia-Idade , Resultado do Tratamento , Carga TumoralRESUMO
PURPOSE: In orthopedic surgeries, it is important to avoid intra-articular implant placements, which increase revision rates and the risk of arthritis. In order to support the intraoperative assessment and correction of surgical implants, we present an automatic detection approach using cone-beam computed tomography (CBCT). METHODS: Multiple active shape models (ASM) with specified articular surface regions are used to isolate the joint spaces. Fast and easy-to-implement methods are integrated in the ASM segmentation to optimize the robustness and accuracy for intraoperative application. A cylinder detection method is applied to determine metal implants. Intersections between articular surfaces and cylinders are detected and used to find intra-articular collisions. RESULTS: Segmentations of two calcaneal articular surfaces were evaluated on 50 patient images and have shown average surface distance errors of 0.59 and 0.46 mm, respectively. The proposed model-independent segmentation at the specified articular surface regions allowed to significantly decrease the error by 22 and 25 % on average. The method was able to compensate suboptimal initializations for translations of up to 16 mm and rotations of up to 21[Formula: see text]. In a human cadaver test, articular perforations could be localized with an accuracy of 0.80 mm on average. CONCLUSIONS: A concept for automatic intraoperative detection of intra-articular implants in CBCT images was presented. The results show a reliable segmentation of articular surfaces in retrospective patient data and an accurate localization of misplaced implants in artificially created human cadaver test cases.
Assuntos
Calcâneo/cirurgia , Tomografia Computadorizada de Feixe Cônico/métodos , Próteses e Implantes , Calcâneo/diagnóstico por imagem , Humanos , Período Intraoperatório , Estudos RetrospectivosRESUMO
BACKGROUND: There is considerable amount of interindividual variability in the size and location of the vascular territories of the major brain arteries. More data are needed to assess the amount of variability and the possible implications for further research and patient care. Arterial spin labeling (ASL) magnetic resonance imaging has been applied in various forms to facilitate noninvasive imaging of cerebrovascular flow territories, but it requires the definition of the flow territory of interest prior to image acquisition. OBJECTIVE: Assessing the vascular territories of the major brain territories by using ultra-high-field time-of-flight (TOF) magnetic resonance angiography. METHODS: We have developed an alternative method to ASL by simulating cerebrovascular dye injections. Following bias field normalization and segmentation of the vessels from 7 Tesla TOF imaging, a virtual model of the arterial vessel tree was generated and a simulation of dye dispersion into the brain tissue was performed. RESULTS: The results provided by our method are consistent with the data obtained by autoptic dye injection studies in 23 human beings by van der Zwan in 1993. CONCLUSION: Further technical improvements in imaging and segmentation techniques will improve the accuracy of the method and will facilitate the delineation of flow territories after image acquisition on even smaller subtrees of the cerebral vasculature.
Assuntos
Encéfalo/irrigação sanguínea , Encéfalo/diagnóstico por imagem , Circulação Cerebrovascular/fisiologia , Angiografia por Ressonância Magnética/métodos , Velocidade do Fluxo Sanguíneo , Feminino , Voluntários Saudáveis , Humanos , Aumento da Imagem , Interpretação de Imagem Assistida por Computador , Masculino , Modelos Cardiovasculares , Marcadores de SpinRESUMO
PURPOSE: Analysis of mitral valve morphology during reconstruction is routinely based on visual assessment and subjective, poorly reproducible measurements. We prove the feasibility of a new intraoperative system for quantitative mitral valve analysis. DESCRIPTION: The proposed computer-based assistance system enables accurate intraoperative localization of anatomic landmarks on the mitral valve apparatus using optical tracking technology. Measurement and visualization strategies were specifically developed and tailored for mitral valve operations. EVALUATION: The feasibility of intraoperative quantitative measurements was successfully shown for 9 patients. Precise geometric descriptions of the valve were obtained and adequately visualized, providing valuable decision support during the intervention. The mean annular area obtained from the intraoperative measurements was 736 ± 266 mm(2), in good agreement with the mean area of the implanted prosthetic rings of 617 ± 124 mm(2), which are slightly smaller due to annular downsizing. Comparison with preoperative three-dimensional echocardiography revealed differences between the beating heart, with transverse and septolateral annular diameters of 40.6 ± 15.4 mm and 41.2 ± 8.2 mm, and the intraoperative cardioplegic condition, with corresponding diameters of 34.3 ± 6.9 mm and 27.4 ± 5.6 mm. CONCLUSIONS: Mitral valve analysis by optical tracking represents a unique technologic advance in intraoperative assessment, providing the surgeon with an extended quantitative perception of surgical target. This technology promotes a major philosophical change from an empirical procedure toward a quantitatively predictable modern reconstructive operation.
Assuntos
Valva Mitral/cirurgia , Idoso , Idoso de 80 Anos ou mais , Ecocardiografia Tridimensional , Humanos , Período Intraoperatório , Valva Mitral/anatomia & histologia , Valva Mitral/diagnóstico por imagemRESUMO
PURPOSE: Mitral valve reconstruction is a widespread surgical method to repair incompetent mitral valves, which usually includes implantation of a ring prosthesis. To date, intraoperative analysis of the mitral valve is merely based on visual assessment using simple surgical tools, which might not allow for accurate assessment of the complex anatomy. METHODS: We propose a novel intraoperative computer-based assistance system, which combines passive optical tracking technology with tailored measurement strategies applicable during different phases of the intraoperative workflow. Based on the assessment of the valvular apparatus by customized tracked instruments, the system (1) generates an enhanced three-dimensional visualization, which (2) incorporates accurate quantifications and (3) provides assistance, e.g., in terms of virtual prosthesis selection. RESULTS: Phantom experiments in a realistic environment revealed a high system accuracy (mean precision [Formula: see text] mm and mean trueness [Formula: see text] mm) and a low user error (mean precision [Formula: see text] mm and mean trueness [Formula: see text] mm). The assistance system was successfully applied five times during open and minimally invasive reconstructive surgery in patients having mitral valve insufficiency. The measurement steps integrate well into the traditional workflow, enhancing the surgeon's three-dimensional perception and generating a suggestion for an appropriate prosthesis. CONCLUSION: The proposed assistance system provides a novel, accurate, and reproducible method for assessing the valvular geometry intraoperatively.
Assuntos
Anuloplastia da Valva Mitral/métodos , Insuficiência da Valva Mitral/cirurgia , Valva Mitral/cirurgia , Cirurgia Assistida por Computador/métodos , Humanos , Procedimentos Cirúrgicos Minimamente Invasivos , Valva Mitral/diagnóstico por imagem , Imagens de FantasmasRESUMO
PURPOSE: With the help of an intra-operative mobile C-arm CT, medical interventions can be verified and corrected, avoiding the need for a post-operative CT and a second intervention. An exact adjustment of standard plane positions is necessary for the best possible assessment of the anatomical regions of interest but the mobility of the C-arm causes the need for a time-consuming manual adjustment. In this article, we present an automatic plane adjustment at the example of calcaneal fractures. METHODS: We developed two feature detection methods (2D and pseudo-3D) based on SURF key points and also transferred the SURF approach to 3D. Combined with an atlas-based registration, our algorithm adjusts the standard planes of the calcaneal C-arm images automatically. The robustness of the algorithms is evaluated using a clinical data set. Additionally, we tested the algorithm's performance for two registration approaches, two resolutions of C-arm images and two methods for metal artifact reduction. RESULTS: For the feature extraction, the novel 3D-SURF approach performs best. As expected, a higher resolution ([Formula: see text] voxel) leads also to more robust feature points and is therefore slightly better than the [Formula: see text] voxel images (standard setting of device). Our comparison of two different artifact reduction methods and the complete removal of metal in the images shows that our approach is highly robust against artifacts and the number and position of metal implants. CONCLUSIONS: By introducing our fast algorithmic processing pipeline, we developed the first steps for a fully automatic assistance system for the assessment of C-arm CT images.
Assuntos
Fraturas do Tornozelo/diagnóstico por imagem , Calcâneo/lesões , Fraturas Intra-Articulares/diagnóstico por imagem , Tomografia Computadorizada por Raios X/métodos , Algoritmos , Fraturas do Tornozelo/cirurgia , Calcâneo/diagnóstico por imagem , Calcâneo/cirurgia , Humanos , Processamento de Imagem Assistida por Computador , Fraturas Intra-Articulares/cirurgia , Monitorização Intraoperatória , Complicações Pós-Operatórias/prevenção & controleRESUMO
PURPOSE: The assessment of intra-operatively acquired volumetric data is a difficult and often time-consuming task, which demands a new set of skills from the surgeons. In the case of orthopedic surgeries such as the treatment of calcaneal fractures, the correctness of the reduction of the bone fragments can be verified with the help of C-arm CT volumetric images. For an accurate intra-operative assessment of the displaced fragments, an automatic segmentation of the articular surfaces and color-coded visualization was developed. METHODS: Our automatic approach consists of three major steps: first, using adjusted standard planes intersecting the articular region, the joint space is localized with an intensity profile-based method. In a second step, the localized joint space is segmented on the Laplacian of Gaussian filtered volumetric image by a modified binary flood fill algorithm. Finally, a 3D surface model of the segmented joint space is analyzed and visualized with focus on critical displacements of the surface. RESULTS: A specifically designed human cadaver study consisting of ten lower legs of ten different donors was conducted to acquire 48 realistic C-arm CT images of misaligned bone fragments (steps of varying sizes) in the posterior talar articular surface of the calcaneus. The proposed algorithmic pipeline was verified by the acquired image data and showed very good results with no false positives and an overall correct displacement assessment of 93.8%. CONCLUSIONS: The proposed algorithmic pipeline can be easily integrated into the clinical workflow and qualifies for intra-operative usage. It showed very good results on the reference data set of the cadaver study. With the help of such an assistance system, the time-consuming process of 2D view adjustment and visual assessment of the gray value images can be greatly simplified.
Assuntos
Algoritmos , Calcâneo/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico/métodos , Fraturas Ósseas/diagnóstico por imagem , Cadáver , HumanosRESUMO
Although most animal cells contain centrosomes, consisting of a pair of centrioles, their precise contribution to cell division and embryonic development is unclear. Genetic ablation of STIL, an essential component of the centriole replication machinery in mammalian cells, causes embryonic lethality in mice around mid gestation associated with defective Hedgehog signaling. Here, we describe, by focused ion beam scanning electron microscopy, that STIL(-/-) mouse embryos do not contain centrioles or primary cilia, suggesting that these organelles are not essential for mammalian development until mid gestation. We further show that the lack of primary cilia explains the absence of Hedgehog signaling in STIL(-/-) cells. Exogenous re-expression of STIL or STIL microcephaly mutants compatible with human survival, induced non-templated, de novo generation of centrioles in STIL(-/-) cells. Thus, while the abscence of centrioles is compatible with mammalian gastrulation, lack of centrioles and primary cilia impairs Hedgehog signaling and further embryonic development.
Assuntos
Fatores de Transcrição Hélice-Alça-Hélice Básicos/deficiência , Centríolos/metabolismo , Cílios/metabolismo , Proteínas Proto-Oncogênicas/deficiência , Animais , Fatores de Transcrição Hélice-Alça-Hélice Básicos/metabolismo , Centríolos/ultraestrutura , Embrião de Mamíferos/metabolismo , Embrião de Mamíferos/patologia , Embrião de Mamíferos/ultraestrutura , Fibroblastos/metabolismo , Fibroblastos/ultraestrutura , Proteínas Hedgehog/metabolismo , Humanos , Camundongos , Microcefalia/patologia , Centro Organizador dos Microtúbulos/metabolismo , Mutação/genética , Proteínas Proto-Oncogênicas/metabolismo , Transdução de Sinais , Proteína 1 de Leucemia Linfocítica Aguda de Células TRESUMO
One of the main challenges in computer-assisted soft tissue surgery is the registration of multi-modal patient-specific data for enhancing the surgeon's navigation capabilities by observing beyond exposed tissue surfaces. A new approach to marker-less guidance involves capturing the intra-operative patient anatomy with a range image device and doing a shape-based registration. However, as the target organ is only partially visible, typically does not provide salient features and underlies severe non-rigid deformations, surface matching in this context is extremely challenging. Furthermore, the intra-operatively acquired surface data may be subject to severe systematic errors and noise. To address these issues, we propose a new approach to establishing surface correspondences, which can be used to initialize fine surface matching algorithms in the context of intra-operative shape-based registration. Our method does not require any prior knowledge on the relative poses of the input surfaces to each other, does not rely on the detection of prominent surface features, is robust to noise and can be used for overlapping surfaces. It takes into account (1) similarity of feature descriptors, (2) compatibility of multiple correspondence pairs, as well as (3) the spatial configuration of the entire correspondence set. We evaluate the algorithm on time-of-flight (ToF) data from porcine livers in a respiratory liver motion simulator. In all our experiments the alignment computed from the established surface correspondences yields a registration error below 1cm and is thus well suited for initializing fine surface matching algorithms for intra-operative soft-tissue registration.
Assuntos
Fígado/diagnóstico por imagem , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Cirurgia Assistida por Computador/métodos , Algoritmos , Animais , Humanos , Imageamento Tridimensional/métodos , Período Intraoperatório , Imagens de Fantasmas , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , SuínosRESUMO
PURPOSE: Orthopedic fractures are often fixed using metal implants. The correct positioning of cylindrical implants such as surgical screws, rods and guide wires is highly important. Intraoperative 3D imaging is often used to ensure proper implant placement. However, 3D image interaction is time-consuming and requires experience. We developed an automatic method that simplifies and accelerates location assessment of cylindrical implants in 3D images. METHODS: Our approach is composed of three major steps. At first, cylindrical characteristics are detected by analyzing image gradients in small image regions. Next, these characteristics are grouped in a cluster analysis. The clusters represent cylindrical implants and are used to initialize a cylinder-to-image registration. Finally, the two end points are optimized regarding image contrast along the cylinder axis. RESULTS: A total of 67 images containing 420 cylindrical implants were used for testing. Different anatomical regions (calcaneus, spine) and various image sources (two mobile devices, three reconstruction methods) were investigated. Depending on the evaluation set, the detection performance was between 91.7 and 96.1% true- positive rate with a false-positive rate between 2.0 and 3.2%. The end point distance errors ranged from [Formula: see text] to [Formula: see text] mm and the orientation errors from [Formula: see text] to [Formula: see text] degrees. The average computation time was less than 5 seconds. CONCLUSIONS: An automatic method was developed and tested that obviates the need for 3D image interaction during intraoperative assessment of cylindrical orthopedic implants. The required time for working with the viewing software of cone-beam CT device is drastically reduced and leads to a shorter time under anesthesia for the patient.
Assuntos
Calcâneo/cirurgia , Tomografia Computadorizada de Feixe Cônico/métodos , Procedimentos Ortopédicos/métodos , Próteses e Implantes , Coluna Vertebral/cirurgia , Calcâneo/diagnóstico por imagem , Humanos , Imageamento Tridimensional/métodos , Monitorização Intraoperatória , Software , Coluna Vertebral/diagnóstico por imagemRESUMO
PURPOSE: Diagnosis of autism spectrum disorders (ASD) is difficult, as symptoms vary greatly and are difficult to quantify objectively. Recent work has focused on the assessment of non-invasive diffusion tensor imaging-based biomarkers that reflect the microstructural characteristics of neuronal pathways in the brain. While tractography-based approaches typically analyze specific structures of interest, a graph-based large-scale network analysis of the connectome can yield comprehensive measures of larger-scale architectural patterns in the brain. Commonly applied global network indices, however, do not provide any specificity with respect to functional areas or anatomical structures. Aim of this work was to assess the concept of network centrality as a tool to perform locally specific analysis without disregarding the global network architecture and compare it to other popular network indices. METHODS: We create connectome networks from fiber tractographies and parcellations of the human brain and compute global network indices as well as local indices for Wernicke's Area, Broca's Area and the Motor Cortex. Our approach was evaluated on 18 children suffering from ASD and 18 typically developed controls using magnetic resonance imaging-based cortical parcellations in combination with diffusion tensor imaging tractography. RESULTS: We show that the network centrality of Wernicke's area is significantly (p<0.001) reduced in ASD, while the motor cortex, which was used as a control region, did not show significant alterations. This could reflect the reduced capacity for comprehension of language in ASD. CONCLUSIONS: The betweenness centrality could potentially be an important metric in the development of future diagnostic tools in the clinical context of ASD diagnosis. Our results further demonstrate the applicability of large-scale network analysis tools in the domain of region-specific analysis with a potential application in many different psychological disorders.
Assuntos
Algoritmos , Mapeamento Encefálico/métodos , Córtex Cerebral/patologia , Transtornos Globais do Desenvolvimento Infantil/diagnóstico , Imagem de Tensor de Difusão/métodos , Redes Neurais de Computação , Criança , Feminino , Humanos , Idioma , Masculino , Reprodutibilidade dos TestesRESUMO
BACKGROUND: The pathogenesis of borderline personality disorder (BPD) is complex and not fully understood. Using diffusion tensor imaging, recent studies suggest that white matter abnormalities may occur in adult patients with BPD. However, deeper insight into the disorder-specific developmental psychobiology (e.g., analysis of adolescents with BPD; inclusion of clinical control groups) is missing. METHODS: Twenty adolescent patients with BPD (aged 14-18 years), 20 healthy, and 20 clinical control subjects were assessed using diffusion tensor imaging. All subjects were right-handed girls, matched for age and IQ. Microstructural parameters were analyzed via tractography of the main bundles in the limbic system and using Tract-Based Spatial Statistics, an explorative, global approach. RESULTS: BPD was associated with decreased fractional anisotropy in the fornix when compared with clinical (p < .001) or healthy (nonsignificant trend) control subjects. Using Tract-Based Spatial Statistics, significant disorder-specific white matter alterations were found in the long association bundles interconnecting the heteromodal association cortex and in connections between the thalamus and hippocampus. CONCLUSIONS: The study strongly supports the hypothesis that white matter alterations play a key role in the pathogenesis of BPD. These disorder-specific alterations include white matter pathways involved in emotion regulation but also affect parts of the heteromodal association cortex that are related to emotion recognition. Our findings unify previously documented deficits in emotion recognition and regulation and suggest that a large-scale network of emotion processing is disrupted in BPD. Continued research is essential to evaluate the predictive value of these early disruptions in a clinical context.
Assuntos
Transtorno da Personalidade Borderline/complicações , Transtorno da Personalidade Borderline/patologia , Leucoencefalopatias/complicações , Fibras Nervosas Mielinizadas/patologia , Adolescente , Anisotropia , Estudos de Casos e Controles , Imagem de Tensor de Difusão , Feminino , Humanos , Processamento de Imagem Assistida por Computador , Escalas de Graduação Psiquiátrica , PsicometriaRESUMO
PURPOSE OF REVIEW: Use of virtual reality to navigate open and endoscopic surgery has significantly evolved during the last decade. Current status of seven most interesting projects inside the European Association of Urology section of uro-technology is summarized with review of literature. RECENT FINDINGS: Marker-based endoscopic tracking during laparoscopic radical prostatectomy using high-definition technology reduces positive margins. Marker-based endoscopic tracking during laparoscopic partial nephrectomy by mechanical overlay of three-dimensional-segmented virtual anatomy is helpful during planning of trocar placement and dissection of renal hilum. Marker-based, iPAD-assisted puncture of renal collecting system shows more benefit for trainees with reduction of radiation exposure. Three-dimensional laser-assisted puncture of renal collecting system using Uro-Dyna-CT realized in an ex-vivo model enables minimal radiation time. Electromagnetic tracking for puncture of renal collecting system using a sensor at the tip of ureteral catheter worked in an in-vivo model of porcine ureter and kidney. Attitude tracking for ultrasound-guided puncture of renal tumours by accelerometer reduces the puncture error from 4.7 to 1.8âmm. Feasibility of electromagnetic and optical tracking with the da Vinci telemanipulator was shown in vitro as well as using in-vivo model of oesophagectomy. Target registration error was 11.2âmm because of soft-tissue deformation. SUMMARY: Intraoperative navigation is helpful during percutaneous puncture collecting system and biopsy of renal tumour using various tracking techniques. Early clinical studies demonstrate advantages of marker-based navigation during laparoscopic radical prostatectomy and partial nephrectomy. Combination of different tracking techniques may further improve this interesting addition to video-assisted surgery.
Assuntos
Cirurgia Assistida por Computador/métodos , Procedimentos Cirúrgicos Urológicos/métodos , Animais , Fenômenos Eletromagnéticos , Esofagectomia , Europa (Continente) , Feminino , Humanos , Biópsia Guiada por Imagem , Laparoscopia , Masculino , Nefrectomia , Imagem Óptica , Prostatectomia , Tomografia Computadorizada por Raios X , Cateterismo UrinárioRESUMO
BACKGROUND: Laparoscopic liver surgery is particularly challenging owing to restricted access, risk of bleeding, and lack of haptic feedback. Navigation systems have the potential to improve information on the exact position of intrahepatic tumors, and thus facilitate oncological resection. This study aims to evaluate the feasibility of a commercially available augmented reality (AR) guidance system employing intraoperative robotic C-arm cone-beam computed tomography (CBCT) for laparoscopic liver surgery. METHODS: A human liver-like phantom with 16 target fiducials was used to evaluate the Syngo iPilot(®) AR system. Subsequently, the system was used for the laparoscopic resection of a hepatocellular carcinoma in segment 7 of a 50-year-old male patient. RESULTS: In the phantom experiment, the AR system showed a mean target registration error of 0.96 ± 0.52 mm, with a maximum error of 2.49 mm. The patient successfully underwent the operation and showed no postoperative complications. CONCLUSION: The use of intraoperative CBCT and AR for laparoscopic liver resection is feasible and could be considered an option for future liver surgery in complex cases.
Assuntos
Carcinoma Hepatocelular/cirurgia , Tomografia Computadorizada de Feixe Cônico/métodos , Marcadores Fiduciais , Hepatectomia/métodos , Laparoscopia/métodos , Neoplasias Hepáticas/cirurgia , Imagens de Fantasmas , Cirurgia Assistida por Computador/instrumentação , Carcinoma Hepatocelular/diagnóstico por imagem , Desenho de Equipamento , Humanos , Neoplasias Hepáticas/diagnóstico por imagem , Masculino , Pessoa de Meia-Idade , Reprodutibilidade dos Testes , Fatores de TempoRESUMO
BACKGROUND: Three-dimensional (3D) presentations enhance the understanding of complex anatomical structures. However, it has been shown that two dimensional (2D) "key views" of anatomical structures may suffice in order to improve spatial understanding. The impact of real 3D images (3Dr) visible only with 3D glasses has not been examined yet. Contrary to 3Dr, regular 3D images apply techniques such as shadows and different grades of transparency to create the impression of 3D.This randomized study aimed to define the impact of both the addition of key views to CT images (2D+) and the use of 3Dr on the identification of liver anatomy in comparison with regular 3D presentations (3D). METHODS: A computer-based teaching module (TM) was used. Medical students were randomized to three groups (2D+ or 3Dr or 3D) and asked to answer 11 anatomical questions and 4 evaluative questions. Both 3D groups had animated models of the human liver available to them which could be moved in all directions. RESULTS: 156 medical students (57.7% female) participated in this randomized trial. Students exposed to 3Dr and 3D performed significantly better than those exposed to 2D+ (p < 0.01, ANOVA). There were no significant differences between 3D and 3Dr and no significant gender differences (p > 0.1, t-test). Students randomized to 3D and 3Dr not only had significantly better results, but they also were significantly faster in answering the 11 anatomical questions when compared to students randomized to 2D+ (p < 0.03, ANOVA). Whether or not "key views" were used had no significant impact on the number of correct answers (p > 0.3, t-test). CONCLUSION: This randomized trial confirms that regular 3D visualization improve the identification of liver anatomy.
Assuntos
Anatomia/educação , Instrução por Computador/métodos , Cirurgia Geral/educação , Imageamento Tridimensional , Fígado/anatomia & histologia , Avaliação Educacional , Feminino , Humanos , Fígado/cirurgia , MasculinoRESUMO
BACKGROUND: Navigation systems potentially facilitate minimally invasive esophagectomy and improve patient outcome by improving intraoperative orientation, position estimation of instruments, and identification of lymph nodes and resection margins. The authors' self-developed navigation system is highly accurate in static environments. This study aimed to test the overall accuracy of the navigation system in a realistic operating room scenario and to identify the different sources of error altering accuracy. METHODS: To simulate a realistic environment, a porcine model (n = 5) was used with endoscopic clips in the esophagus as navigation targets. Computed tomography imaging was followed by image segmentation and target definition with the medical imaging interaction toolkit software. Optical tracking was used for registration and localization of animals and navigation instruments. Intraoperatively, the instrument was displayed relative to segmented organs in real time. The target registration error (TRE) of the navigation system was defined as the distance between the target and the navigation instrument tip. The TRE was measured on skin targets with the animal in the 0° supine and 25° anti-Trendelenburg position and on the esophagus during laparoscopic transhiatal preparation. RESULTS: On skin targets, the TRE was significantly higher in the 25° position, at 14.6 ± 2.7 mm, compared with the 0° position, at 3.2 ± 1.3 mm. The TRE on the esophagus was 11.2 ± 2.4 mm. The main source of error was soft tissue deformation caused by intraoperative positioning, pneumoperitoneum, surgical manipulation, and tissue dissection. CONCLUSION: The navigation system obtained acceptable accuracy with a minimally invasive transhiatal approach to the esophagus in a realistic experimental model. Thus the system has the potential to improve intraoperative orientation, identification of lymph nodes and adequate resection margins, and visualization of risk structures. Compensation methods for soft tissue deformation may lead to an even more accurate navigation system in the future.
Assuntos
Esofagectomia/métodos , Esofagoscopia/métodos , Radiografia Intervencionista/métodos , Cirurgia Assistida por Computador/métodos , Cirurgia Vídeoassistida/métodos , Algoritmos , Animais , Calibragem , Esôfago/anatomia & histologia , Esôfago/cirurgia , Marcadores Fiduciais , Linfonodos/anatomia & histologia , Imagens de Fantasmas , Radiografia Intervencionista/instrumentação , Software , Cirurgia Assistida por Computador/instrumentação , Sus scrofa , Suínos , Tomografia Computadorizada por Raios X , Cirurgia Vídeoassistida/instrumentaçãoRESUMO
PURPOSE: The Medical Imaging Interaction Toolkit (MITK) has been available as open-source software for almost 10 years now. In this period the requirements of software systems in the medical image processing domain have become increasingly complex. The aim of this paper is to show how MITK evolved into a software system that is able to cover all steps of a clinical workflow including data retrieval, image analysis, diagnosis, treatment planning, intervention support, and treatment control. METHODS: MITK provides modularization and extensibility on different levels. In addition to the original toolkit, a module system, micro services for small, system-wide features, a service-oriented architecture based on the Open Services Gateway initiative (OSGi) standard, and an extensible and configurable application framework allow MITK to be used, extended and deployed as needed. A refined software process was implemented to deliver high-quality software, ease the fulfillment of regulatory requirements, and enable teamwork in mixed-competence teams. RESULTS: MITK has been applied by a worldwide community and integrated into a variety of solutions, either at the toolkit level or as an application framework with custom extensions. The MITK Workbench has been released as a highly extensible and customizable end-user application. Optional support for tool tracking, image-guided therapy, diffusion imaging as well as various external packages (e.g. CTK, DCMTK, OpenCV, SOFA, Python) is available. MITK has also been used in several FDA/CE-certified applications, which demonstrates the high-quality software and rigorous development process. CONCLUSIONS: MITK provides a versatile platform with a high degree of modularization and interoperability and is well suited to meet the challenging tasks of today's and tomorrow's clinically motivated research.