Polymer Nanocomposite Sensors with Improved Piezoelectric Properties through Additive Manufacturing.

Additive manufacturing (AM) technology has recently seen increased utilization due to its versatility in using functional materials, offering a new pathway for next-generation conformal electronics in the smart sensor field. However, the limited availability of polymer-based ultraviolet (UV)-curable materials with enhanced piezoelectric properties necessitates the development of a tailorable process suitable for 3D printing. This paper investigates the structural, thermal, rheological, mechanical, and piezoelectric properties of a newly developed sensor resin material. The polymer resin is based on polyvinylidene fluoride (PVDF) as a matrix, mixed with constituents enabling UV curability, and boron nitride nanotubes (BNNTs) are added to form a nanocomposite resin. The results demonstrate the successful micro-scale printability of the developed polymer and nanocomposite resins using a liquid crystal display (LCD)-based 3D printer. Additionally, incorporating BNNTs into the polymer matrix enhanced the piezoelectric properties, with an increase in the voltage response by up to 50.13%. This work provides new insights for the development of 3D printable flexible sensor devices and energy harvesting systems.

The respiratory syncytial virus prefusion F protein vaccine attenuates the severity of respiratory syncytial virus-associated disease in breakthrough infections in adults ≥60 years of age.

Background: Respiratory syncytial virus (RSV) is a contagious pathogen causing acute respiratory infections (ARIs). Symptoms range from mild upper respiratory tract infections to potentially life-threatening lower respiratory tract disease (LRTD). In adults ≥60 years old, vaccine efficacy of a candidate vaccine for older adults (RSVPreF3 OA) was 71.7% against RSV-ARI and 82.6% against RSV-LRTD (AReSVi-006/NCT04886596). We present the patient-reported outcomes (PROs) from the same trial at the end of the first RSV season in the northern hemisphere (April 2022). Methods: In this phase 3 trial, adults aged ≥60 years were randomized (1:1) to receive one dose of RSVPreF3 OA vaccine or placebo. PROs were assessed using InFLUenza Patient-Reported Outcome (FLU-PRO), Short Form-12 (SF-12), and EuroQol-5 Dimension (EQ-5D) questionnaires. Peak FLU-PRO Chest/Respiratory scores during the first 7 days from ARI episode onset were compared using a Wilcoxon test. Least squares mean (LSMean) of SF-12 physical functioning (PF) and EQ-5D health utility scores were estimated using mixed effects models. Results: In the RSVPreF3 OA group (N = 12,466), 27 first RSV-ARI episodes were observed versus 95 in the Placebo group (N = 12,494). Median peak FLU-PRO Chest/Respiratory scores were lower in RSVPreF3 OA (1.07) versus Placebo group (1.86); p = 0.0258. LSMean group differences for the PF and EQ-5D health utility score were 7.00 (95% confidence interval [CI]: -9.86, 23.85; p = 0.4125) and 0.0786 (95% CI: -0.0340, 0.1913; p = 0.1695). Conclusions: The RSVPreF3 OA vaccine, in addition to preventing infection, attenuated the severity of RSV-associated symptoms in breakthrough infections, with trends of reduced impact on PF and health utility.

Factors associated to influenza vaccination among hospital's healthcare workers in the Autonomous Community of Madrid, Spain 2021-2022.

Influenza vaccination (IV) aims primarily to protect high-risk groups against severe influenza-associated disease and death. It is recommended in Spain for high-risk groups, including Healthcare workers (HCWs). However, vaccination uptake has been consistently below desirable levels. The objective of this study were to evaluate influenza vaccination coverage using data from the regional vaccination registry, during 2021-2022 season, among HCWs in public hospitals in Autonomous Community of Madrid (CAM) and to explore factors associated with influenza vaccination. We conducted a cross-sectional study using administrative data retrieved from the Regional Department of Health data repositories. A multilevel logistic regression model was designed to estimate Level 1 (individual) and Level 2 (contextual) variables that are associated with HCWs vaccination. The study population was HCWs from 25 public hospitals in CAM who were active during the period of the influenza 2021-2022 vaccination campaign. The global influenza vaccination coverage (IVC) was 52.1 %. All study Level 1 variables were significantly associated with vaccine uptake. Greater IVC is associated with individual characteristics: female (OR1.14; 95 %CI 1.09-1.19), older age 59-69 years old (OR1.72; 95 %CI 1.60-1.84), born in Spain, medical staff, more than one high-risk condition (OR1.24; 95 %CI 1.10-1.40; respectively) and vaccinated in two previous campaigns (OR25.64; 95 %CI 24.27-27.09). IVC was highest among HCWs celiac disease (65.5 %) followed by diabetes mellitus (65.1 %) and chronic inflammatory disease (64.3 %). The hospital where the study subject worked also showed an effect on the vaccination uptake, although Level 2 variable (hospital complexity) was not positively associated. IVC in HCWs remains suboptimal. These findings may prove useful to tailor strategies to reach specific groups. It is recommended to delve into the identification of factors associated with the HCWs workplace that may have a positive impact on IV.

Analysis of the Microstructure and Mechanical Properties of Titanium-Based Composites Reinforced by Secondary Phases and B4C Particles Produced via Direct Hot Pressing.

In the last decade, titanium metal matrix composites (TMCs) have received considerable attention thanks to their interesting properties as a consequence of the clear interface between the matrix and the reinforcing phases formed. In this work, TMCs with 30 vol % of B4C are consolidated by hot pressing. This technique is a powder metallurgy rapid process. Incorporation of the intermetallic to the matrix, 20 vol % (Ti-Al), is also evaluated. Here, the reinforcing phases formed by the reaction between the titanium matrix and the ceramic particles, as well as the intermetallic addition, promote substantial variations to the microstructure and to the properties of the fabricated composites. The influences of the starting materials and the consolidation temperature (900 °C and 1000 °C) are investigated. By X-ray diffraction, scanning and transmission electron microscopy analysis, the in-situ-formed phases in the matrix and the residual ceramic particles were studied. Furthermore, mechanical properties are studied through tensile and bending tests in addition to other properties, such as Young's modulus, hardness, and densification of the composites. The results show the significant effect of temperature on the microstructure and on the mechanical properties from the same starting powder. Moreover, the Ti-Al addition causes variation in the interface between the reinforcement and the matrix, thereby affecting the behaviour of the TMCs produced at the same temperature.

Analysis of the Influence of Starting Materials and Processing Conditions on the Properties of W/Cu Alloys.

In this work, a study of the influence of the starting materials and the processing time used to develop W/Cu alloys is carried out. Regarding powder metallurgy as a promising fabrication route, the difficulties in producing W/Cu alloys motivated us to investigate the influential factors on the final properties of the most industrially demanding alloys: 85-W/15-Cu, 80-W/20-Cu, and 75-W/25-Cu alloys. Two different tungsten powders with large variation among their particle size-fine (Wf) and coarse (Wc) powders-were used for the preparation of W/Cu alloys. Three weight ratios of fine and coarse (Wf:Wc) tungsten particles were analyzed. These powders were labelled as "tungsten bimodal powders". The powder blends were consolidated by rapid sinter pressing (RSP) at 900 °C and 150 MPa, and were thus sintered and compacted simultaneously. The elemental powders and W/Cu alloys were studied by optical microscopy (OM) and scanning electron microscopy (SEM). Thermal conductivity, hardness, and densification were measured. Results showed that the synthesis of W/Cu using bimodal tungsten powders significantly affects the final alloy properties. The higher the tungsten content, the more noticeable the effect of the bimodal powder. The best bimodal W powder was the blend with 10 wt % of fine tungsten particles (10-Wf:90-Wc). These specimens present good values of densification and hardness, and higher values of thermal conductivity than other bimodal mixtures.

Disparate Antibiotic Resistance Gene Quantities Revealed across 4 Major Cities in California: A Survey in Drinking Water, Air, and Soil at 24 Public Parks.

Widespread prevalence of multidrug and pandrug-resistant bacteria has prompted substantial concern over the global dissemination of antibiotic resistance genes (ARGs). Environmental compartments can behave as genetic reservoirs and hotspots, wherein resistance genes can accumulate and be laterally transferred to clinically relevant pathogens. In this work, we explore the ARG copy quantities in three environmental media distributed across four cities in California and demonstrate that there exist city-to-city disparities in soil and drinking water ARGs. Statistically significant differences in ARGs were identified in soil, where differences in blaSHV gene copies were the most striking; the highest copy numbers were observed in Bakersfield (6.0 × 10-2 copies/16S-rRNA gene copies and 2.6 × 106 copies/g of soil), followed by San Diego (1.8 × 10-3 copies/16S-rRNA gene copies and 3.0 × 104 copies/g of soil), Fresno (1.8 × 10-5 copies/16S-rRNA gene copies and 8.5 × 102 copies/g of soil), and Los Angeles (5.8 × 10-6 copies/16S-rRNA gene copies and 5.6 × 102 copies/g of soil). In addition, ARG copy numbers in the air, water, and soil of each city are contextualized in relation to globally reported quantities and illustrate that individual genes are not necessarily predictors for the environmental resistome as a whole.

Influence of Sintering Temperature on the Microstructure and Mechanical Properties of In Situ Reinforced Titanium Composites by Inductive Hot Pressing.

This research is focused on the influence of processing temperature on titanium matrix composites reinforced through Ti, Al, and B4C reactions. In order to investigate the effect of Ti-Al based intermetallic compounds on the properties of the composites, aluminum powder was incorporated into the starting materials. In this way, in situ TixAly were expected to form as well as TiB and TiC. The specimens were fabricated by the powder metallurgy technique known as inductive hot pressing (iHP), using a temperature range between 900 °C and 1400 °C, at 40 MPa for 5 min. Raising the inductive hot pressing temperature may affect the microstructure and properties of the composites. Consequently, the variations of the reinforcing phases were investigated. X-ray diffraction, microstructural analysis, and mechanical properties (Young's modulus and hardness) of the specimens were carried out to evaluate and determine the significant influence of the processing temperature on the behavior of the composites.