RESUMO
The characteristics of nanomaterials have garnered significant attention in recent research on natural and forced convection. This study focuses on the forced convection characteristics of ternary nanofluids within convergent and divergent channels. The ternary nanofluid comprises titanium oxide (TiO2), zinc oxide (ZnO), and silver suspended in water, which serves as the base fluid. Using COMSOL Multiphysics 6.0, a reliable software for finite element analysis, numerical simulations were conducted for steady and incompressible two-dimensional flow. Reynolds numbers varying from 100 to 800 were employed to investigate forced convection. Additionally, we explored aspect ratios (channel height divided by the height of the convergent or divergent section) of -0.4, -0.2, 0, 0.2, and 0.4. Our findings revealed that only at aspect ratio a = 0.4 did the average outlet temperature increase as the Reynolds number rose, while other aspect ratios exhibited decreasing average temperatures with declining Reynolds numbers. Moreover, as the Reynolds number increased from 100 to 800 and the total volume fraction of the ternary nanofluids ranged from 0.003 to 0.15, there was a significant 100% enhancement in the average Nusselt number. For clarity, this article briefly presents essential information, such as the study's numerical nature, fluid properties (constant-property fluid), and the methodology (COMSOL Multiphysics 6.0, finite element analysis). Key conclusions are highlighted to enable readers to grasp the main outcomes at a glance. These details are also adequately covered in the manuscript to facilitate a comprehensive understanding of the research. The utilization of this emerging phenomenon holds immense potential in various applications, ranging from the development of highly efficient heat exchangers to the optimization of thermal energy systems. This phenomenon can be harnessed in scenarios in which effective cost management in thermal production is a critical consideration.
RESUMO
This article explores the properties of heat and mass transport for MHD Casson nanofluid flow between two horizontal plates by considering the Darcy-Forchheimer medium. The effects of a uniform inclined magnetic field are discussed numerically. A Darcy-Forchheimer medium is considered in the x-direction between two plates. The features of Brownian diffusive motion, porosity, friction, viscous dissipation, chemical reaction, and thermophoresis are also considered. The governing equations of the model are a system of partial differential equations. This system is converted into non-linear ordinary differential equations using suitable similarity functions. The numerical shooting technique is used to solve the attained boundary value problem. This numerical technique is endowed with the Runge-Kutta order four method and the Newton method. Graphs and tables depict different significant effects. It is observed that the effect of a magnetic field is inversely related to the fluid flow. Moreover, the porosity factor (λ) and the magnetic inclination (γ) are inversely related to the surface drag force (Cf) and the Nusselt number (Nu).
RESUMO
This study examines the numerical representation of fluid flow on the Maxwell model in a double-diffusive boundary layer over a horizontal plate. The investigation incorporates slip conditions, encompassing momentum slip, thermal slip, and suction parameters. Moreover, the study includes the inspiration of thermal radiation, heat generation, and mass transfer. The governing partial differential equations (pertaining to momentum, continuity, energy transport, and mass transport) are transformed into ordinary differential equations (ODEs) using appropriate similarity transformations. To solve these equations in conjunction with suitable boundary conditions, the bvp4c inbuilt software is implemented. This is achieved through the shooting approach employed in MATLAB. A comprehensive agreement between the numerical technique and previously published findings demonstrates its efficacy. The outcomes are presented through graphical representations and tables, showcasing various parameters such as momentum slip, temperature slip, local Nusselt number, Sherwood number, and suction parameter. The primary motivation of this research lies in investigating the behaviour of Maxwell fluid flow in the absence of slip conditions. The study of Maxwell fluid flow over a flat plate with the combined effects of suction, thermal slip, and momentum slip conditions has a wide range of practical applications that span multiple industries, contributing to improved designs, efficiency, and understanding of fluid behaviour in various systems. The main aim of this study is to present streamlined results under varying conditions, explicitly investigating the influence of suction effects and slip conditions on the flow.
RESUMO
In recent years, global energy demand has surged, emphasizing the need for nations to enhance energy resources. The photovoltaic thermal (PV/T) system, capable of generating electrical energy from sunlight, is a promising renewable energy solution. However, it faces the challenge of overheating, which reduces efficiency. To address this, we introduce a flow channel within the PV/T system, allowing coolant circulation to improve electrical efficiency. Within this study, we explore into the workings of a PV/T system configuration, featuring a polycrystalline silicon panel atop a copper absorber panel. This innovative setup incorporates a rectangular flow channel, enhanced with a centrally positioned rotating circular cylinder, designed to augment flow velocity. This arrangement presents a forced convection scenario, where heat transfer primarily occurs through conduction in the uppermost two layers, while the flow channel beneath experiences forced convection. To capture this complex phenomenon, we accurately address the two-dimensional Navier-Stokes and energy equations, employing simulations conducted via COMSOL 6.0 software, renowned for its utilization of the finite element method. To optimize heat dissipation and efficiency, we introduce a hybrid nanofluid comprised of titanium oxide and silver nanoparticles dispersed in water, circulating through the flow channel. Various critical parameters come under scrutiny, including the Reynolds number, explored across the range of 100-1000, the volume fractions of both nanoparticle types, systematically tested within the range of 0.001-0.05, and the controlled speed of the circular cylinder, maintained within the range of 0.1-0.25 m/s. It was found that incorporating silver nanoparticles as a suspended component is more effective in enhancing PV/T efficiency than the addition of titanium oxide. Additionally, maintaining the volume fraction of titanium oxide between 4 and 5% yields improved efficiency, provided that the cylinder rotates at a higher speed. It was observed that cell efficiency can be regulated by adjusting four parameters, such as the Reynolds number, cylinder rotation speed, and the volume fraction of both nanoparticles.
RESUMO
This study introduces an innovative approach to address convex optimization problems, with a specific focus on applications in image and signal processing. The research aims to develop a self-adaptive extra proximal algorithm that incorporates an inertial term to effectively tackle challenges in convex optimization. The study's significance lies in its contribution to advancing optimization techniques in the realm of image deblurring and signal reconstruction. The proposed methodology involves creating a novel self-adaptive extra proximal algorithm, analyzing its convergence rigorously to ensure reliability and effectiveness. Numerical examples, including image deblurring and signal reconstruction tasks using only 10% of the original signal, illustrate the practical applicability and advantages of the algorithm. By introducing an inertial term within the extra proximal framework, the algorithm demonstrates potential for faster convergence and improved optimization outcomes, addressing real-world challenges of image enhancement and signal reconstruction. The algorithm's incorporation of an inertial term showcases its potential for faster convergence and improved optimization outcomes. This research significantly contributes to the field of optimization techniques, particularly in the context of image and signal processing applications.
RESUMO
This article focuses on a numerical investigation aimed at enhancing the electrical performance of a two-dimensional photovoltaic thermal system (PV/T) through the application of cooling using hybrid nanofluids. The hybrid nanofluids consist of titanium oxide and silver nanoparticles suspended in water, while the PV/T system is based on polycrystalline silicon, copper, and a flow channel with a rotating cylinder. PV/T devices generate electricity from sunlight, but their performance degrades over time due to the heat generated by solar radiation. Therefore, nanofluids can be circulated through the bottom flow channel to cool the device. This study utilizes 2D incompressible Navier-Stokes equations to control fluid flow and energy equations to manage energy distribution. The COMSOL 6.0 finite element software is employed for comprehensive modeling and simulation. To enhance the performance of the PV/T system, a parametric study is conducted by varying the Reynolds number (ranging from 100 to 1000), cylinder rotational speed (varying from 0.01 to 0.2 m s-1), and silver volume fraction (ranging from 0.01 to 0.2). The results show that increasing the Reynolds number and the volume fraction of silver leads to a reduction in the maximum temperature of the cell. The maximum temperature of the cell also decreases with the rotational speed of the cylinder but only for high Reynolds numbers. By applying the present model, the cell's efficiency is improved by 5.93%.
RESUMO
Background: Cases of hypospadias present for poor stream or cosmetic appearance. The main aim is to provide a visibly normal phallus. Preputial reconstruction is technical. A properly planned reconstruction based on anthropometry may improve the result. We are presenting our experience of reconstruction based on glans anthropometry. Aim: The aim of the study was to evaluate the importance of glans anthropometry in preputial reconstruction in cases of hypospadias. Materials and Methods: All cases of hypospadias operated between June 2014 and March 2022 were included. Glans width was measured at the base. The marking sutures for preputial reconstruction were taken at distance thrice the glans width at base. Those requiring religious circumcision along with repair, associated significant chordee, catheter came out before 2 weeks, or history of any previous penile surgery were excluded. All the cases were subjected to urethroplasty, meatoplasty, and preputioplasty. The results obtained were analyzed. Results: One hundred and forty-eight out of 159 cases formed the study group. There were 31 glanular, 42 distal penile, 58 mid-penile, and 17 proximal penile hypospadias. Mean glans width at base was 16 mm (range: 11-21 mm). Mean distance of marking suture at prepuce was 38 mm (range: 33-63 mm). Mean follow-up was 12 months (range: 1-36 months). Mean age at presentation was 23 months (range: 14-72 months). Mean operating time was 50 min (range: 45-60 min). Fistula at the base of preputioplasty was seen in four. Dehiscence of preputioplasty was seen in six. Meatal stenosis was seen in three cases. Conclusion: Preputial reconstruction improves the cosmetic appearance of the hypospadiac penis. Reconstruction based on glans anthropometry improves the result and avoids complications.
RESUMO
The aim of this research is to explore the use of solar-powered ships (SPS) as a means to reduce greenhouse gas emissions and fossil fuel dependency in the maritime industry. The study focuses on improving the heat transfer efficiency in SPS by employing hybrid nanofluids (HNF) containing carbon nanotubes (CNTs). Additionally, a novel approach utilizing renewable energy and electromagnetic control is proposed to enhance the performance of SPS. The research implements the non-Newtonian Maxwell type and Cattaneo-Christov heat flux model in parabolic trough solar collectors used for ships. The study conducts theoretical experiments and simulations to evaluate the thermal conductivity and viscosity of the CNT-based HNF. Various properties, including solar thermal radiation, viscous dissipation, slippery velocity, and porous media, are assessed to determine the effectiveness of thermal transport in SPS. The research employs similarity variables to simplify the complex partial differential equations into ordinary differential equations and solves them using the Chebyshev collocation spectral method. The results indicate that the MWCNT-SWCNT/EO hybrid nanofluid significantly improves the thermal conductivity, thereby enhancing heat transfer. The HNF exhibits an efficiency rate of approximately 1.78% with a minimum efficiency rate of 2.26%.
Assuntos
Nanotubos de Carbono , Energia Solar , Temperatura Alta , Navios , Fenômenos EletromagnéticosRESUMO
The article explores how fluid flows and heat transfers in both deep and shallow cavities when using a nanofluid made of water, copper, and aluminum oxide. The study applies the Corcione model to hybrid nanofluids, which considers viscosity, conductivity, and the size of the nanoparticle, temperature, and Reynolds number. The cavity is connected to a rectangular channel, with the cavity's length being half the total length of the enclosure, and the aspect ratio (cavity height divided by height of the channel) is tested from 1 to 3. The study uses the Navier-Stokes equation and energy equation in two dimensions, along with finite element-based software, COMSOL 5.6, to simulate the combination of fluid flow and heat transmission. The results show a circular distribution of temperature in the cavity, and the average temperature drops as the volume fraction of copper upsurges. However, both the Reynolds number and volume fraction of copper improve the average Nusselt number, which shows how well the fluid transfers heat, along the cavity's middle line. The percentage change in the average Nusselt number decreases as the aspect ratio increases, indicating improved conduction.
RESUMO
Background and Objective: Total Knee Arthroplasty is a commonly performed procedure for arthritic knees. Preventing complications is of utmost importance for good functional outcomes and preventing morbidity. Wound closure after the procedure is as important as the replacement aspect of surgery.The objective of this study was to provide subjective and objective evidence of better closure technique and material; we conducted the study so that the outcome of TKA can be further improved. Methods: We conducted a randomized trial at The Indus Hospital, Karachi, from December 2018 to June 2020. All patients from age 40 to 70 years who underwent total knee arthroplasty were included in the study. The wound of one knee was closed with Polypropylene (Prolene) sutures, and the other with staples. The wound was assessed independently by two assessors using Hollander's score; lower score means a worse outcome. All data was entered and analyzed using STATA version 16. Results: Thirty patients who underwent bilateral total knee replacement were included in the analysis, among which 71.8% were female. The average age of participants was 57.3 (± 7.5) years. The mean incision length on the right knee was 17.6 ± 1.1 cm, while on the left the incision length was 18.3 ± 1.2 cm. Overall, the mean Hollander score was significantly different among participants in the sutures and staples group in both the right (p-value=0.001) and left knees (p-value=0.001). The score was significantly higher in knees closed with sutures as compared to staples. Also, the mean Hollander score is significantly higher in females than males in both the right knee (B=0.56, p-value=0.049) and the left knee (B=0.38, p-value=0.044). Conclusion: The study has shown that Hollander's score was significantly higher in knees closed with sutures as compared to the patients in whom staples were used for wound closure.
RESUMO
In this article, we are focusing on heat and mass transfer through a Multicomponent tubular reactor containing a cooling jacket by thermal decomposition of propylene oxide in water. The chemical reaction is an irreversible, 1st order reaction and an exothermic reaction that yields propylene glycol with enthalpy = -84,666 J/mol. The constant rate of the reaction is followed by the Arrhenius equation in which the activation energy is taken on a trial basis in the range from 75,000 to 80,000 J/mol with a fixed frequency factor. For the fluid to flow, the Reynolds number is kept in the range from 100 to 1000. The three partial differential equations of mass, momentum, and energy are coupled to study heat and mass transfer in a tubular reactor by using the chemistry interface in COMSOL Multiphysics 5.4. The initial concentration of propylene oxide is tested in the range from 2 to 3% and the thermal conductivity of the mixture is tested in the range 0.599-0.799. It was found that the amount deactivated of the compound decreases with an increase in Reynolds number. Propylene oxide is decomposed at about 99.8% at Re = 100 at lower activation energy and gives the total maximum enthalpy change in the tubular reactor. Observing the relationship between Sherwood numbers to Nusselt numbers, it was deducted that the convective heat transfer is opposite to convective mass transfer for high Reynolds numbers.
RESUMO
Sudden infant death syndrome (SIDS) is a poorly understood disorder, and its pathophysiology and risk factors remain unclear. Research in the area is the key to combating the pervasive prevalence of this fatal disorder. We sought to identify the top 50 articles concerning SIDS and study their bibliometric characteristics to gain an insight into the research trends in this area. Using the Scopus database, two independent reviewers conducted a literature search using a prespecified search string. Results were arranged according to the citation count, and the top 50 relevant articles were selected. No time restrictions were set, and all types of articles were included. A detailed analysis was carried out to identify the trends and characteristics of the top 50 articles. The top 50 articles were published between 1972 and 2011, with the most productive 5-year interval being 1991-1995. These 50 papers accumulated a total of 13,703 citations (median = 236 citations per paper). Among these, about 9% were self-citations. The citations received by these core papers seemed to decline post-2009. The top 50 articles were published in 21 different journals, with Pediatrics contributing the most (n = 15). US authors were listed for 60% of the articles (n = 30). None of the articles originated from Asian authors. Our manuscript highlights the characteristics of impactful articles on SIDS - and this can act as a directive for researchers aiming to publish on this topic. Bibliometric parameters suggest a decreasing research interest in the fi eld of SIDS, which is concerning, and efforts should be made to promote research. Furthermore, the lack of influential research from Asian authors is also troubling. Funding should preferably be directed toward Asian researchers to bridge the gap in knowledge.
Assuntos
Bibliometria , Publicações , Morte Súbita do Lactente , Bases de Dados Factuais , Humanos , Lactente , Recém-Nascido , Publicações/estatística & dados numéricos , Publicações/tendências , Pesquisadores , Morte Súbita do Lactente/prevenção & controleRESUMO
INTRODUCTION: In resource-limited settings - with inequalities in access to and outcomes for trauma, surgical and critical care - intensive care registries are uncommon. AIM: The Pakistan Society of Critical Care Medicine, Intensive Care Society (UK) and the Network for Improving Critical Care Systems and Training (NICST) aim to implement a clinician-led real-time national intensive care registry in Pakistan: the Pakistan Registry of Intensive CarE (PRICE). METHOD: This was adapted from a successful clinician co-designed national registry in Sri Lanka; ICU information has been linked to real-time dashboards, providing clinicians and administrators individual patient and service delivery activity respectively. OUTPUT: Commenced in August 2017, five ICU's (three administrative regions - 104 beds) were recruited and have reported over 1100 critical care admissions to PRICE. IMPACT AND FUTURE: PRICE is being rolled out nationally in Pakistan and will provide continuous granular healthcare information necessary to empower clinicians to drive setting-specific priorities for service improvement and research.
RESUMO
PURPOSE: One of the most important measures of success of open inguinal herniorrhaphy is the incidence of recurrence. Reports suggest that up to 13% of all inguinal hernia repairs worldwide, irrespective of the approach, are repaired for recurrence. The reason as to why inguinal hernias recur is most likely multifactorial. The aim of this review is to evaluate the risk factors responsible for these recurrences in open suture and mesh techniques. METHODS: A search of the Medline, Embase, Science Citation Index, Current Contents and PubMed databases identified English language, peer-reviewed articles on the causes of recurrence following open inguinal herniorrhaphy published between 1990 and 2018. The search terms included 'Inguinal hernia'; 'Open methods'; 'Suture repair'; 'Mesh repair', 'Recurrence', 'Causes', 'Humans'. RESULTS: The literature revealed several contributing modifiable and non-modifiable risk factors that were responsible for recurrence following open suture and mesh inguinal herniorrhaphy. These included perioperative, patient and hernia factors. CONCLUSIONS: Despite the advent of laparoscopic techniques, open inguinal herniorrhaphy remains one of the most common surgical operations. With open inguinal hernia repairs, risk factors for recurrence can be broadly classified into perioperative, patient and hernia factors. Certain patient and technical risk factors are modifiable and could reduce the recurrence rate. However, many others factors are non-modifiable. It is therefore imperative that the outcome of open inguinal herniorrhaphy must be optimised by careful planning and education for both surgeons and patients to achieve the lowest possible risk of subsequent surgery for recurrence.
Assuntos
Hérnia Inguinal/cirurgia , Herniorrafia/efeitos adversos , Feminino , Herniorrafia/métodos , Humanos , Masculino , Recidiva , Fatores de Risco , Telas Cirúrgicas , SuturasRESUMO
INTRODUCTION: Intestinal atresia requires multiple surgeries and long hospital stay. We tried managing these cases by primary anastomosis with transanastomotic tube (TAT) for early feeding. AIMS: The aim of the study was to analyse the outcomes in patients of intestinal atresia who underwent primary anastomosis with a TAT. MATERIALS AND METHODS: The records between June 2014 and November 2017 were analysed. Those with incomplete data or unclear final outcome were excluded. Patients managed by primary anastomosis with TAT (Group A) or without TAT (Group B) were included. The TAT was kept for 6 weeks. Oral feeds were started after 2 weeks in all the cases. P < 0.05 was considered as statistically significant. RESULTS: Forty-eight cases were included. There were two duodenal atresia, 29 jejunal atresia and 17 ileal atresia. The mean age at surgery was 2 days (range: 1-16 days). There were 42 cases in Group A (with TAT) and six in Group B (without TAT). The average duration of start of feeds was 78 h (range: 72-96 h) in Group A and 402 h (range: 360-504 h) in Group B (P = 0.01). The mean duration of hospital stay was 7 days (range: 5-15 days) and 27 days (range: 19-48 days) in Group A and B, respectively (P = 0.02). The overall survival was 38 (91%) and 3 (50%) in Group A and B, respectively (P = 0.01). Reexploration was required in 2/42 and 2/6 cases in Group A and B, respectively (P = 0.4). Total parental nutrition was required in 2/42 and all cases in Group A and B, respectively. CONCLUSION: Primary repair in intestinal atresia with a TAT is a practical option. The overall outcome is better.
RESUMO
PURPOSE: The purpose of this study was to systematically assess the arthroscopic management of suprascapular neuropathy, including the aetiology, surgical decision-making, clinical outcomes, and complications associated with the procedure. METHODS: Three databases [PubMed, Ovid (Medline), and Embase] were searched. Systematic literature screening and data abstraction was performed in duplicate to present a review of studies reporting on arthroscopic management of suprascapular neuropathy. The quality of the included studies was assessed using level of evidence and the MINORS (Methodological Index for Nonrandomized Studies) checklist. RESULTS: In total, 40 studies (17 case reports, 20 case series, 2 retrospective comparative studies, and 1 prospective comparative study) were identified, including 259 patients (261 shoulders) treated arthroscopically for suprascapular neuropathy. The most common aetiology of suprascapular neuropathy was suprascapular nerve compression by a cyst at the spinoglenoid notch (42%), and the decision to pursue arthroscopic surgery was most commonly based on the results of clinical findings and investigations (47%). Overall, 97% of patients reported significant improvement in or complete resolution of their pre-operative symptoms (including pain, strength, and subjective function of the shoulder) over a mean follow-up period of 23.7 months. Further, there was a low overall complication rate (4%) associated with the arthroscopic procedures. CONCLUSION: While most studies evaluating arthroscopic management of suprascapular neuropathy are uncontrolled studies with lower levels of evidence, results indicate that such management provides patients with significant improvements in pain, strength, and subjective function of the shoulder, and has a low incidence of complications. Patients managed arthroscopically for suprascapular neuropathy may expect significant improvements in pain, strength, and subjective function of the shoulder. LEVEL OF EVIDENCE: Level IV, systematic review of level II to IV studies.
Assuntos
Artroscopia , Síndromes de Compressão Nervosa/cirurgia , Dor de Ombro/etiologia , Dor de Ombro/cirurgia , Ombro/inervação , Humanos , Síndromes de Compressão Nervosa/complicações , Síndromes de Compressão Nervosa/fisiopatologia , Complicações Pós-Operatórias/epidemiologia , Escápula , Dor de Ombro/fisiopatologia , Resultado do TratamentoRESUMO
PURPOSE: To investigate the use of arthroscopy in the management of patients with snapping scapula syndrome, including aetiology, surgical decision-making, outcomes, complications, effectiveness of arthroscopy, and quality of evidence of the existing literature. METHODS: Three databases (PubMed, Ovid [MEDLINE], and EMBASE) were searched independently and in duplicate to systematically screen the literature. The Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) checklist guided the reporting and data abstraction. Methodological quality of all included papers was assessed using the MINORS criteria. The results are presented in a narrative summary fashion using descriptive statistics including means, proportions, and ranges. RESULTS: Overall, 18 studies (5 case reports and 13 case series; all level IV evidence) were identified, including 201 patients (203 shoulders). The mean follow-up period was 32.7 months (range 1-154 months). Surgical decision-making for the use of arthroscopy was most commonly based on a failed trial of initial non-operative management in 17 studies (94%). Overall, 21% of cases achieved complete resolution of pre-operative symptoms, including pain, crepitus, and range of motion, while 68% of cases obtained some clinical improvement, but reported some residual symptoms (persistent crepitus [12%] and persistent scapulothoracic pain [4%]). Moreover, poor outcomes were reported 11% of cases and the most common complication was scapular oedema (6%). CONCLUSION: Arthroscopic management of snapping scapula syndrome yields improvement in pain, crepitus, and range of motion in a majority of patients; however, most patients experience residual symptoms. Further studies are needed to compare the outcomes of shoulder arthroscopy with other available treatment options for snapping scapula syndrome. Shoulder arthroscopy for snapping scapula can improve patients' symptoms; however, patients must be informed about the high likelihood of persistent symptoms post-operatively. LEVEL OF EVIDENCE: Systematic review of Level IV studies.
Assuntos
Artroscopia/métodos , Artropatias/cirurgia , Escápula/cirurgia , Humanos , Artropatias/complicações , Dor de Ombro/etiologia , Dor de Ombro/cirurgia , Síndrome , Resultado do TratamentoRESUMO
BACKGROUND: The purpose of this study was to evaluate the five-year publication rate of papers presented at both the open and closed American Shoulder and Elbow Surgeons' (ASES) annual meetings from 2005 to 2010. METHODS: Online abstracts of the presentations at the open and closed ASES annual meetings were independently screened for clinical studies and graded for quality using level of evidence. The databases PubMed (MEDLINE), Ovid (MEDLINE), and EMBASE were comprehensively searched for full-text publications corresponding to these presentations and any paper published within five years of the presentation date was counted. RESULTS: Overall, 131/266 papers corresponding to the meeting presentations were identified for a five-year publication rate of 49.2 %. Sixty two (48 %) of the papers were published in The Journal of Shoulder and Elbow Surgeons, 23 (18 %) were published in The American Journal of Sports Medicine, and 20 (16 %) were published in The Journal of Bone and Joint Surgery. The mean patient sample size included in presentations with a subsequent full-text publication was higher (154; standard error =27) than the presentations not published (93; standard error = 13) (p = 0.039). There was no correlation (p = 0.248) between the publication rate and the level of evidence of the presentations. CONCLUSIONS: The publication rate of presentations at ASES meetings from 2005 to 2010 is similar to that reported from other orthopaedic meetings. Studies with large sample sizes should continue to be encouraged, and high quality presentations must consistently be followed up with full-text manuscript preparation in order to maximize the future clinical impact.
RESUMO
Integrative veterinary medicine (IVM) describes the combination of complementary and alternative therapies with conventional care and is guided by the best available evidence. Veterinarians frequently encounter questions about complementary and alternative veterinary medicine (CAVM) in practice, and the general public has demonstrated increased interest in these areas for both human and animal health. Consequently, veterinary students should receive adequate exposure to the principles, theories, and current knowledge supporting or refuting such techniques. A proposed curriculum guideline would broadly introduce students to the objective evaluation of new veterinary treatments while increasing their preparation for responding to questions about IVM in clinical practice. Such a course should be evidence-based, unbiased, and unaffiliated with any particular CAVM advocacy or training group. All IVM courses require routine updating as new information becomes available. Controversies regarding IVM and CAVM must be addressed within the course and throughout the entire curriculum. Instructional honesty regarding the uncertainties in this emerging field is critical. Increased training of future veterinary professionals in IVM may produce an openness to new ideas that characterizes the scientific method and a willingness to pursue and incorporate evidence-based medicine in clinical practice with all therapies, including those presently regarded as integrative, complementary, or alternative.
RESUMO
OBJECTIVE: To determine the mean age of fusion of medial end of clavicle by radiography. STUDY DESIGN: Cross-sectional study. PLACE AND DURATION OF STUDY: Departments of Forensic Medicine, Dow Medical College and Ziauddin University, Karachi, from June 2010 to May 2011. METHODOLOGY: The subjects for this study were selected from various government colleges of Karachi. The subjects were analyzed for age and further confirmation was done by interviews where birth records and other physical parameters of age were also assessed. X-rays chest PA view was taken focusing on the medial end of clavicle; and were examined by a consultant radiologist and complete fusion of the medial end was noted. P-value less than 0.05 was considered significant. RESULTS: The mean age of fusion of medial end of the clavicle was found to be 21 ±1.43 years. Significant difference was observed in male to female age of fusion 21.14 ±1.41 years versus 20.65 ±1.94 years (p > 0.05). Similarly, statistically significant differences were observed between lower to middle income class and higher income class of all society. No difference was observed among various ethnic groups. CONCLUSION: Socio-economic factors, such as diet and nutrition, directly affect bone growth and hence bones' age. The results of fusion of the medial end of the clavicle are not affected by ethnicity; however, it is significantly affected by gender. More studies should be conducted in various parts of the country to make a natural standard in setting up uniform criteria for assessing age at or above 21 years.