Extracellular Matrix-Surrogate Advanced Functional Composite Biomaterials for Tissue Repair and Regeneration.

Native tissues, comprising multiple cell types and extracellular matrix components, are inherently composites. Mimicking the intricate structure, functionality, and dynamic properties of native composite tissues represents a significant frontier in biomaterials science and tissue engineering research. Biomimetic composite biomaterials combine the benefits of different components, such as polymers, ceramics, metals, and biomolecules, to create tissue-template materials that closely simulate the structure and functionality of native tissues. While the design of composite biomaterials and their in vitro testing are frequently reviewed, there is a considerable gap in whole animal studies that provides insight into the progress toward clinical translation. Herein, we provide an insightful critical review of advanced composite biomaterials applicable in several tissues. The incorporation of bioactive cues and signaling molecules into composite biomaterials to mimic the native microenvironment is discussed. Strategies for the spatiotemporal release of growth factors, cytokines, and extracellular matrix proteins are elucidated, highlighting their role in guiding cellular behavior, promoting tissue regeneration, and modulating immune responses. Advanced composite biomaterials design challenges, such as achieving optimal mechanical properties, improving long-term stability, and integrating multifunctionality into composite biomaterials and future directions, are discussed. We believe that this manuscript provides the reader with a timely perspective on composite biomaterials.

Blue Laser Triggered Hemostatic Peptide Hydrogel for Gastrointestinal Bleeding Treatment.

In an emergency, nonvariceal upper gastrointestinal bleeding (NVUGIB), endoscopic hemostasis is considered the gold standard intervention. However, current endoscopic hemostasis is very challenging to manage bleeding in large-diameter or deep lesions highly prone to rebleeding risk. Herein, a novel hemostatic peptide hydrogel (HPH) is reported, consisting of a self-assembly peptide sequence CFLIVIGSIIVPGDGVPGDG (PFV) and gelatin methacryloyl (GelMA), which can be triggered by blue laser endoscopy (BLE) for nonvariceal upper gastrointestinal bleeding treatment without recurring bleeding concerns. Upon contact with GelMA solution, PFV immediately fibrillates into ß-sheet nanofiber and solvent-induced self-assembly to form HPH gel. HPH nanofiber networks induced ultrafast coagulation by enveloping blood cells and activating platelets and coagulation factors even to the blood with coagulopathy. Besides its remarkable hemostatic performance in artery and liver injury models, HPH achieves instant bleeding management in porcine NVUGIB models within 60 s by preventing the rebleeding risk. This work demonstrates an extraordinary hemostatic agent for NVUGIB intervention by BLE for the first time, broadening potential application scenarios, including patients with coagulopathy and promising clinical prospects.

Osteogenic Differentiation Potential of iMSCs on GelMA-BG-MWCNT Nanocomposite Hydrogels.

The ability of bone biomaterials to promote osteogenic differentiation is crucial for the repair and regeneration of osseous tissue. The development of a temporary bone substitute is of major importance in enhancing the growth and differentiation of human-derived stem cells into an osteogenic lineage. In this study, nanocomposite hydrogels composed of gelatin methacryloyl (GelMA), bioactive glass (BG), and multiwall carbon nanotubes (MWCNT) were developed to create a bone biomaterial that mimics the structural and electrically conductive nature of bone that can promote the differentiation of human-derived stem cells. GelMA-BG-MWCNT nanocomposite hydrogels supported mesenchymal stem cells derived from human induced pluripotent stem cells, hereinafter named iMSCs. Cell adhesion was improved upon coating nanocomposite hydrogels with fibronectin and was further enhanced when seeding pre-differentiated iMSCs. Osteogenic differentiation and mature mineralization were promoted in GelMA-BG-MWCNT nanocomposite hydrogels and were most evidently observed in the 70-30-2 hydrogels, which could be due to the stiff topography characteristic from the addition of MWCNT. Overall, the results of this study showed that GelMA-BG-MWCNT nanocomposite hydrogels coated with fibronectin possessed a favorable environment in which pre-differentiated iMSCs could better attach, proliferate, and further mature into an osteogenic lineage, which was crucial for the repair and regeneration of bone.

E-cardiac patch to sense and repair infarcted myocardium.

Conductive cardiac patches can rebuild the electroactive microenvironment for the infarcted myocardium but their repair effects benefit by carried seed cells or drugs. The key to success is the effective integration of electrical stimulation with the microenvironment created by conductive cardiac patches. Besides, due to the concerns in a high re-admission ratio of heart patients, a remote medicine device will underpin the successful repair. Herein, we report a miniature self-powered biomimetic trinity triboelectric nanogenerator with a unique double-spacer structure that unifies energy harvesting, therapeutics, and diagnosis in one cardiac patch. Trinity triboelectric nanogenerator conductive cardiac patches improve the electroactivity of the infarcted heart and can also wirelessly monitor electrocardiosignal to a mobile device for diagnosis. RNA sequencing analysis from rat hearts reveals that this trinity cardiac patches mainly regulates cardiac muscle contraction-, energy metabolism-, and vascular regulation-related mRNA expressions in vivo. The research is spawning a device that truly integrates an electrical stimulation of a functional heart patch and self-powered e-care remote diagnostic sensor.

Sol-Gel Derived Gelatin-Bioactive Glass Nanocomposite Biomaterials Incorporating Calcium Chloride and Calcium Ethoxide.

Calcium-containing organic-inorganic nanocomposites play an essential role in developing bioactive bone biomaterials. Ideally, bone substitute materials should mimic the organic-inorganic composition of bone. In this study, the roles of calcium chloride (CaCl2) and calcium ethoxide (Ca(OEt)2) were evaluated for the development of sol-gel-derived organic-inorganic biomaterials composed of gelatin, bioactive glass (BG) and multiwall carbon nanotubes (MWCNTs) to create nanocomposites that mimic the elemental composition of bone. Nanocomposites composed of either CaCl2 or Ca(OEt)2 were chemically different but presented uniform elemental distribution. The role of calcium sources in the matrix of the nanocomposites played a major role in the swelling and degradation properties of biomaterials as a function of time, as well as the resulting porous properties of the nanocomposites. Regardless of the calcium source type, biomineralization in simulated body fluid and favorable cell attachment were promoted on the nanocomposites. 10T1/2 cell viability studies using standard media (DMEM with 5% FBS) and conditioned media showed that Ca(OEt)2-based nanocomposites seemed more favorable biomaterials. Collectively, our study demonstrated that CaCl2 and Ca(OEt)2 could be used to prepare sol-gel-derived gelatin-BG-MWCNT nanocomposites, which have the potential to function as bone biomaterials.

Analyzing Mushroom Structural Patterns of a Highly Compressible and Expandable Hemostatic Foam for Gastric Perforation Repair.

Nature presents the most beautiful patterns through evolving. Here, a layered porous pattern in golden ratio (0.618) is reported from a type of mushroom -Dictyophora Rubrovalvata stipe (DRS). The hierarchical structure shows a mathematical correlation with the golden ratio. This unique structure leads to superior mechanical properties. The gradient porous structure from outside to innermost endows it with asymmetrical hydrophilicity. A mathematical model is then developed to predict and apply to 3D printed structures. The mushroom is then explored to repair gastric perforation because the stomach is a continuous peristaltic organ, and the perforated site is subject to repeated mechanical movements and pressure changes. At present, endoscopic clipping is ineffective in treating ulcerative perforation with fragile surrounding tissues. Although endoscopic implant occlusion provides a new direction for the treatment of gastric ulcers, but the metal or plastic occluder needs to be removed, requiring a second intervention. Decellularized DRS (DDRS) is found with asymmetric water absorption rate, super-compressive elasticity, shape memory, and biocompatibility, making it a suitable occluder for the gastric perforation. The efficacy in blocking gastric perforation and promoting healing is confirmed by endoscopic observation and tissue analysis during a 2-month study.

Platelet Vesicles Synergetic with Biosynthetic Cellulose Aerogels for Ultra-Fast Hemostasis and Wound Healing.

Achieving hemostasis in penetrating and irregular wounds is challenging because the hemostasis factor cannot arrive at the bleeding site, and substantial bleeding will wash away the blood clot. Since the inherently gradual nature of blood clot formation takes time, a physical barrier is needed before blood clot formation. Herein, an ultra-light and shape memory hemostatic aerogel consisting of oxidized bacterial cellulose (OBC) and platelet extracellular vesicles (pVEs) is reported. The OBC-pVEs aerogel provides a physical barrier for the bleeding site by self-expansion, absorbing the liquid from blood to concentrate platelets and clotting factors and accelerating the clot formation by activating platelets and transforming fibrinogen into fibrin. In the rat liver and tail injury models, the blood loss decreases by 73% and 59%, and the bleeding times are reduced by 55% and 62%, respectively. OBC-pVEs aerogel has also been shown to accelerate wound healing. In conclusion, this work introduces an effective tool for treating deep, non-compressible, and irregular wounds and offers valuable strategies for trauma bleeding and wound treatment.

Coupled adsorption-phytoremediation treatment of cellulose-reactive blue dye in a sustainable multi-step pilot-scale process.

A single-step dye removal strategy from wastewater is inadequate for concentrations above 100 mg/L. In order to address this limitation, the adsorption of high dye concentrations followed by phytoremediation is a potential approach for the treatment of dye-contaminated wastewater. This combined method utilizes physical adsorption and biological processes to remove dyes from wastewater. Herein, we investigated a pilot-scale multi-step cascaded process where batch adsorption and fixed-bed column adsorption were combined with phytoremediation to remove cellulose-reactive blue dye at 200 to 500 mg/L concentrations. The batch adsorption utilized low-cost water hyacinth root powder (WHRP) bioadsorbent having 670 m2/g surface area, whereas the fixed-bed column adsorption used sand having a surface area of 75 m2/g. The phytoremediation process utilized water hyacinth plants in a series of ponds. The effluent from one unit is fed to the next until the dye is removed to more than 98% for all concentrations considered in this study. Pilot-scale experimental data fitting to adsorption isotherms and kinetics were performed to gain insight into the pilot-scale adsorption mechanism. The fixed-bed sand column adsorption was conducted at different inlet dye concentrations, flow rates, and bed heights. The breakthrough curves were fit to the Thomas, Yoon-Nelson, and Bohart-Adams models. The effluent from the fixed-bed column was transferred to phytoremediation ponds, where complete dye removal was achieved. Overall, data collectively presented in this study demonstrated that the combined adsorption and phytoremediation approach offers a potential solution for the remediation of high dye concentration in wastewater, providing an effective and sustainable treatment option.

Preparation and Microscopic Mechanical Characterization of L-Methionine-Based Polyphosphazene Fibrous Mats for Vascular Tissue Engineering.

This study investigates the mechanical properties, degradation behavior, and biocompatibility of poly[(α-amino acid ester) phosphazene] electrospun fibers based on the ethyl ester of L-methionine (PαAPz-M), a material with potential applications in tissue engineering. We utilized atomic force microscopy (AFM) to evaluate the fiber mechanical characteristics and calculate its Young's modulus, revealing it to closely mimic the stiffness of a natural extracellular matrix (ECM). We also studied the degradation behavior of PαAPz-M scaffolds over 21 days, showing that they maintain the highly porous structure required for tissue engineering. Further evaluation of mesenchymal multipotent 10T1/2 cell and mesenchymal stem cell (MSC) behavior on the scaffolds demonstrated significant cell viability, proliferation, and successful MSC differentiation into smooth muscle cells. Expression of collagen and elastin by MSCs on the fiber mats highlighted potential ECM formation during scaffold degradation, confirming PαAPz-M as a promising material for vascular tissue engineering.

Bioactive and electrically conductive GelMA-BG-MWCNT nanocomposite hydrogel bone biomaterials.

Natural bone is a complex organic-inorganic composite tissue that possesses endogenous electrically conductive properties in response to mechanical forces. Mimicking these unique properties collectively in a single synthetic biomaterial has so far remained a formidable task. In this study, we report a synthesis strategy that comprised gelatin methacryloyl (GelMA), sol-gel derived tertiary bioactive glass (BG), and uniformly dispersed multiwall carbon nanotubes (MWCNTs) to create nanocomposite hydrogels that mimic the organic-inorganic composition of bone. Using this strategy, biomaterials that are electrically conductive and possess electro-mechanical properties similar to endogenous bone were prepared without affecting their biocompatibility. Nanocomposite hydrogel biomaterials were biodegradable and promoted biomineralization, and supported multipotent mesenchymal progenitor cell (10T1/2) cell interactions and differentiation into an osteogenic lineage. To the best of our knowledge, this work presents the first study to functionally characterize suitable electro-mechanical responses in nanocomposite hydrogels, a key process that occurs in the natural bone to drive its repair and regeneration. Overall, the results demonstrated GelMA-BG-MWCNT nanocomposite hydrogels have the potential to become promising bioactive biomaterials for use in bone repair and regeneration.

Optimization of the Dose Rate Effect in Tetrazolium Gellan Gel Dosimeters.

Tetrazolium salts provide an appealing candidate for 3D gel dosimeters as they exhibit a low intrinsic color, no signal diffusion and excellent chemical stability. However, a previously developed commercial product (the ClearView 3D Dosimeter) based on a tetrazolium salt dispersed within a gellan gum matrix presented a noticeable dose rate effect. The goal of this study was to find out whether ClearView could be reformulated in order to minimize the dose rate effect by optimizing of the tetrazolium salt and gellan gum concentrations and by the addition a thickening agent, ionic crosslinkers, and radical scavengers. To that goal, a multifactorial design of experiments (DOE) was conducted in small-volume samples (4-mL cuvettes). It showed that the dose rate could be effectively minimized without sacrificing the integrity, chemical stability, or dose sensitivity of the dosimeter. The results from the DOE were used to prepare candidate formulations for larger-scale testing in 1-L samples to allow for fine-tuning the dosimeter formulation and conducting more detailed studies. Finally, an optimized formulation was scaled-up to a clinically relevant volume of 2.7 L and tested against a simulated arc treatment delivery with three spherical targets (diameter 3.0 cm), requiring different doses and dose rates. The results showed excellent geometric and dosimetric registration, with a gamma passing rate (at 10% minimum dose threshold) of 99.3% for dose difference and distance to agreement criteria of 3%/2 mm, compared to 95.7% in the previous formulation. This difference may be of clinical importance, as the new formulation may allow the quality assurance of complex treatment plans, relying on a variety of doses and dose rates; thus, expanding the potential practical application of the dosimeter.

Endoscopy Deliverable and Mushroom-Cap-Inspired Hyperboloid-Shaped Drug-Laden Bioadhesive Hydrogel for Stomach Perforation Repair.

Gastrointestinal tract perforation is a full-thickness injury that causes bleeding and fatal infection of the peritoneum. This condition worsens in an acidic gastric environment which interferes with the normal coagulation cascade. Current endoscopic clips to repair gastric perforations are ineffective, and metal or plastic occluders need secondary surgery to remove them. Herein, we report a self-expandable, endoscopy deliverable, adhesive hydrogel to block gastric perforation. We found the nanosilica coating significantly enhanced the adhesive strength even under a simulated strong acidic stomach environment. The developed device was disulfide cross-linked for the reducible degraded gel. By loading with vonoprazan fumarate (VF) and acidic fibroblast growth factor (AFGF), the hyperboloid-shaped device can have a sustained drug release to regulate intragastric pH and promote wound healing. The gel device can be compressed and then expanded like a mushroom when applied in an acute gastric perforation model in both rabbits and minipigs. By utilizing a stomach capsule robot for remotely monitoring the pH and by immunohistochemical analysis, we demonstrated that the compressible hyperboloid-shaped gel could stably block the perforation and promoted wound healing during the 28 days of observation. The real-time pH meter demonstrated that the gel could control intragastric pH above 4 for nearly 60 h to prevent bleeding.

Gold nanoparticles inhibit tumor growth via targeting the Warburg effect in a c-Myc-dependent way.

Gold nanoparticles (AuNPs) are prospective tools for nano-based medicine that can directly target cellular biological processes to influence cell fate and function. Studies have revealed the essential role of AuNPs in metabolic remodeling for macrophage polarization. Nevertheless, as a hallmark of cancer cells, metabolic changes in tumor cells in response to AuNPs have not yet been reported. In the present study, polymer- and folate-conjugated AuNPs with satisfactory biocompatibility and tumor-targeting activity were synthesized to investigate their underlying roles in tumor metabolism. Tumor cells were significantly suppressed by AuNPs in vitro and in vivo, with little cytotoxicity in non-tumor cells. Subcellular localization showed that AuNPs localized in the mitochondria of tumor cells and impaired their structure and function, leading to excessive oxidative stress and mitochondrial apoptosis. Metabolic stress, with decreased glycolysis and insufficient nutrients, was also caused by AuNPs exposure in tumor cells. Mechanistically, the key enzymes (GLUT1 and HK2) for glycolysis modulation were remarkably reduced by AuNPs in a c-Myc-dependent manner. The present study demonstrated a new mechanism for AuNPs in the inhibition of tumor growth, that is, via directly targeting glycolysis and depriving energy. These findings provide new strategies for the design of nano-based medicines and anti-glycolytic therapeutics to inhibit the development of malignant tumors. STATEMENT OF SIGNIFICANCE: Gold nanoparticles (AuNPs) have acquired ever-increasing interest for applications in cancer treatment and diagnosis due to their high biosafety and facile surface modification. Recent studies have shown that AuNPs can work as active agents to directly target the cellular processes and harbor antitumor properties, while the underlying mechanisms remain largely unknown. From the present findings, the stabilized AuNPs showed direct inhibition effects on tumor growth by glycolysis inhibition and energy deprivation. These results provide new insights of AuNPs for tumor treatments, which will further contribute to the development of promising nano-based medicines and anti-glycolytic therapies.

Films, Gels and Electrospun Fibers from Serum Albumin Globular Protein for Medical Device Coating, Biomolecule Delivery and Regenerative Engineering.

Albumin is a natural biomaterial that is abundantly available in blood and body fluids. It is clinically used as a plasma expander, thereby increasing the plasma thiol concentration due to its cysteine residues. Albumin is a regulator of intervascular oncotic pressure, serves as an anti-inflammatory modulator, and it has a buffering role due to its histidine imidazole residues. Because of its unique biological and physical properties, albumin has also emerged as a suitable biomaterial for coating implantable devices, for cell and drug delivery, and as a scaffold for tissue engineering and regenerative medicine. As a biomaterial, albumin can be used as surface-modifying film or processed either as cross-linked protein gels or as electrospun fibers. Herein we have discussed how albumin protein can be utilized in regenerative medicine as a hydrogel and as a fibrous mat for a diverse role in successfully delivering drugs, genes, and cells to targeted tissues and organs. The review of prior studies indicated that albumin is a tunable biomaterial from which different types of scaffolds with mechanical properties adjustable for various biomedical applications can be fabricated. Based on the progress made to date, we concluded that albumin-based device coatings, delivery of drugs, genes, and cells are promising strategies in regenerative and personalized medicine.

Underwater instant adhesion mechanism of self-assembled amphiphilic hemostatic granular hydrogel from Andrias davidianus skin secretion.

The widespread use of biological tissue adhesives for tissue repair is limited by their weak adhesion in a wet environment. Herein, we report the wet adhesion mechanism of a dry granular natural bioadhesive from Andrias davidianus skin secretion (ADS). Once contacting water, ADS granules self-assemble to form a hydrophobic hydrogel strongly bonding to wet substrates in seconds. ADS showed higher shear adhesion than current commercial tissue adhesives and an impressive 72-h underwater adhesion strength of ∼47kPa on porcine skin tissue. The assembled hydrogel in water maintained a dissipation energy of ∼8 kJ/m3, comparable to the work density of muscle, exhibiting its robustness. Unlike catechol adhesion mechanism, ADS wet adhesion mechanism is attributed to water absorption by granules, and the unique equilibrium of protein hydrophobicity, hydrogen bonding, and ionic complexation. The in vivo adhesion study demonstrated its excellent wet adhesion and hemostasis performance in a rat hepatic and cardiac hemorrhage model.

Gelation of highly entangled hydrophobic macromolecular fluid for ultrastrong underwater in situ fast tissue adhesion.

Although strong underwater bioadhesion is important for many biomedical applications, designing adhesives to perform in the presence of body fluids proves to be a challenge. To address this, we propose an underwater and in situ applicable hydrophobic adhesive (UIHA) composed of polydimethylsiloxane, entangled macromolecular silicone fluid, and a reactive silane. The hydrophobic fluid displaced the boundary water, formed an in situ gel, bonded to tissues, and achieved exceptional underwater adhesion strength. Its underwater lap shear adhesion on porcine skin was significantly higher than that of cyanoacrylate and fibrin glues, demonstrating excellent water resistance. The burst pressure of UIHA on porcine skin was 10 times higher than that of fibrin glue. The cytocompatible UIHA successfully sealed ruptured arteries, skin, and lungs in rats, pigs, rabbits, and dogs. Together, the gelation of highly entangled hydrophobic macromolecular fluid provided a means to prepare underwater bioadhesives with strong bonding to tissues and excellent water resistance.

A systematic study of cellulose-reactive anionic dye removal using a sustainable bioadsorbent.

Cellulose-reactive anionic dyes are one of the dominant colorants used in textile finishing. Unfortunately, they also produce large quantities of wastewater that must be treated before discharge, demanding low-cost and sustainable adsorbents that can easily be implemented, especially for developing countries with thriving cotton-based textile sectors. In this study, a high specific surface area (670 m2/g) water hyacinth root powder (WHRP) bioadsorbent that is neither carbonized nor activated was prepared to remove cellulose-reactive anionic blue dye from an aqueous solution. The effect of adsorption pH (pH = 2-8), adsorbent dose (1 g/L-6 g/L), dye concentration (50 mg/L-500 mg/L), adsorbent particle size (50 µm-1000 µm), mixing speed (100 rpm -200 rpm), and adsorption temperatures (22 °C-60 °C) were systematically studied. It was found that the protonation of lignin polyphenols in WHRP at pH = 2 was responsible for the observed high (∼99%) adsorptive removal of reactive blue dye. The maximum equilibrium adsorption capacity was 128.8 mg/g when 1 g/L WHRP and 500 mg/L dye concentration were used. In addition, adsorption isotherms, kinetic models, and adsorption thermodynamics were investigated. Increasing adsorbent dose, decreasing adsorbent particle size, increasing mixing speed, and lowering temperature favored the adsorption of reactive dye to WHRP adsorbent. The batch adsorption data were best fitted with both Langmuir and Temkin models, especially at 22 °C, while the adsorption kinetic behavior was described best using pseudo-second-order kinetics. Adsorption of cellulose-reactive blue dye to WHRP was spontaneous as characterized by the negative Gibbs energy (-11 kJ/mol to -24 kJ/mol) and exothermic with negative enthalpy (-13 kJ/mol to -23 kJ/mol). The overall adsorption process was controlled by more than one mechanism since the intraparticle diffusion was not the only rate-limiting step under our experimental conditions. Taken together, the abundantly available and sustainable WHRP is an efficient adsorbent that could be scaled up for treating cellulose-reactive dye-contaminated water.

Electrospun Biodegradable α-Amino Acid-Substituted Poly(organophosphazene) Fiber Mats for Stem Cell Differentiation towards Vascular Smooth Muscle Cells.

Mesenchymal stem cells, derived from human-induced pluripotent stem cells (iPSC), are valuable for generating smooth muscle cells (SMCs) for vascular tissue engineering applications. In this study, we synthesized biodegradable α-amino acid-substituted poly(organophosphazene) polymers and electrospun nano-fibrous scaffolds (~200 nm diameter) to evaluate their suitability as a matrix for differentiation of iPSC-derived mesenchymal stem cells (iMSC) into mature contractile SMCs. Both the polymer synthesis approach and the electrospinning parameters were optimized. Three types of cells, namely iMSC, bone marrow derived mesenchymal stem cells (BM-MSC), and primary human coronary artery SMC, attached and spread on the materials. Although L-ascorbic acid (AA) and transforming growth factor-beta 1 (TGF-ß1) were able to differentiate iMSC along the smooth muscle lineage, we showed that the electrospun fibrous mats provided material cues for the enhanced differentiation of iMSCs. Differentiation of iMSC to SMC was characterized by increased transcriptional levels of early to late-stage smooth muscle marker proteins on electrospun fibrous mats. Our findings provide a feasible strategy for engineering functional vascular tissues.

Bioactive fluorescent hybrid microparticles as a stand-alone osteogenic differentiation inducer.

Osteogenic differentiation of stem cells is one of the essential steps in bone regeneration. While supplementing exogenous factors using differentiation media is the established method to differentiate stem cells into osteoblasts on biomaterials, designing biomaterials that can act as a stand-alone differentiation inducer and promote bone regeneration is preferred for clinical translation. In this work, we report dexamethasone-loaded organic-inorganic hybrid microparticles synthesized from an intrinsically fluorescent poly (ester amide) and tertiary bioactive glass (PEA-BG) as a stand-alone osteogenic differentiation inducer. The mechanical properties data indicated that the compressive modulus of fluorescent hybrid microparticles could be modulated by its composition. The hybrid fluorescent microparticles supported the adhesion and proliferation of 10T1/2 â€‹cells in culture for up to seven days. Both pristine and dexamethasone-loaded PEA-BG microparticles were able to induce osteogenic differentiation of 10T1/2 â€‹cells in the absence of any media supplement, to a level even higher than standard osteogenic media, as evidenced by the expression of osteogenic markers on gene and protein levels and matrix mineralization. Taken together, the fluorescent PEA-BG hybrid microparticles have the potential to be used as a stand-alone biomaterial for osteogenic differentiation and bone regeneration.

Injectable and conductive cardiac patches repair infarcted myocardium in rats and minipigs.

Cardiac patches can help to restore the electrophysiological properties of the heart after myocardial infarction. However, scaffolds for the repair of heart muscle typically require surgical implantation or, if they are injectable, they are not electrically conductive or do not maintain their shape or function. Here, we report the performance, as demonstrated for the repair of infarcted heart muscle in rats and minipigs, of injectable and conductive scaffolds consisting of methacrylated elastin and gelatin, and carbon nanotubes that display shape-memory behaviour, a hierarchical porous structure and a negligible Poisson's ratio. In rats, the implantation of cell-free patches or patches seeded with rat cardiomyocytes onto the myocardium after ligation of the left anterior descending coronary artery led to functional repair after 4 weeks, as indicated by increases in fractional shortening and the ejection fraction, and by a decrease in the infarcted area. We also observed measures of functional recovery in minipigs with infarcted hearts after the delivery of cell-free patches or patches incorporating cardiomyocytes differentiated from human pluripotent stem cells.