RESUMO
To date, the potential exploitation of hybrid organic-inorganic perovskites (HOIPs) in photovoltaic technologies has been significantly hampered by their poor environmental stability. HOIP degradation can be triggered by conventional operational environments, with excessive heating and exposure to oxygen and moisture significantly reducing the performances of HOIP-based solar cells. An imperative need emerges for a thorough investigation on the impact of these factors on the HOIP stability. In this work, the degradation of methylammonium lead bromide (CH3NH3PbBr3) thin films, deposited via spin-coating on indium tin oxide (ITO) and strontium titanate (STO) substrates, was investigated by combining Raman and ultraviolet-visible (UV-Vis) absorption spectroscopy, as well as optical and fluorescence microscopy. We assessed the physical and chemical degradation of the films occurring under diverse preservation conditions, shedding light on the byproducts emerging from different degradation pathways and on the optimal HOIP preservation conditions.
RESUMO
BACKGROUND: The SCHUMANN study evaluated the efficacy and safety of the selective P2 × 3 antagonist eliapixant in patients with endometriosis-associated pelvic pain (EAPP). METHODS: SCHUMANN was a randomized, placebo- and active comparator-controlled, double-blind to placebo and open-label to comparator, parallel-group, multicenter, dose-finding phase 2b study. The participants were women with surgically diagnosed endometriosis who fulfilled defined EAPP criteria. Participants were randomized 1:1:1:1 to twice daily (BID) 25 mg, 75 mg, or 150 mg oral eliapixant or a placebo for 12 weeks. An exploratory once-daily elagolix 150 mg treatment group was also included. The primary endpoint was the absolute change in mean worst EAPP from baseline to the end of intervention (EOI). RESULTS: Overall, 215 participants were randomized for treatment (44 to eliapixant 25 mg, 44 to eliapixant 75 mg, 43 to eliapixant 150 mg, 43 to a placebo, and 41 to elagolix 150 mg). For safety reasons, the study was terminated early; both treatment and enrollment stopped immediately, producing less than 50% of the planned number of completers. The study found no significant differences in EAPP reduction from baseline between groups and no significant dose-response model. The elagolix 150 mg group showed better pain reduction than any of the other groups. No new safety signals were observed, relative to the previously known safety profile of eliapixant, which was generally well tolerated. However, one case of moderate and probably drug-induced liver injury in a participant receiving eliapixant 150 mg BID supported the association between eliapixant and a potential increase in liver function values, defined before the start of the phase 2 program. CONCLUSIONS: This study did not meet its primary objective as no statistically significant or clinically relevant differences in changes of mean worst EAPP from baseline were observed between treatment groups. The single observed case of moderate, probably drug-induced liver injury was the second case in the eliapixant phase 2 program conducted in the following indications: refractory or unexplained chronic cough, diabetic neuropathic pain, overactive bladder, and EAPP. Due to this, the benefit-risk ratio for the study was no longer considered to be positive. CLINICAL TRIAL REGISTRATION: ClinicalTrials.gov identifier NCT04614246; registered November 3, 2020.
Assuntos
Endometriose , Dor Pélvica , Humanos , Feminino , Endometriose/complicações , Endometriose/tratamento farmacológico , Dor Pélvica/tratamento farmacológico , Dor Pélvica/etiologia , Adulto , Método Duplo-Cego , Resultado do Tratamento , Pessoa de Meia-Idade , Hidrocarbonetos Fluorados/uso terapêutico , Hidrocarbonetos Fluorados/efeitos adversos , Relação Dose-Resposta a Droga , Medição da Dor , PirimidinasRESUMO
In this study, we introduce novel microporous poly(D,L-lactide) acid-carbon nanodot (PLA-CD) nanocomposite scaffolds tailored for potential applications in image-guided bone regeneration. Our primary objective was to investigate concentration-dependent structural variations and their relevance to cell growth, crucial aspects in bone regeneration. The methods employed included comprehensive characterization techniques such as DSC/TGA, FTIR, rheological, and degradation assessments, providing insights into the scaffolds' thermoplastic behavior, microstructure, and stability over time. Notably, the PLA-CD scaffolds exhibited distinct self-fluorescence, which persisted after 21 days of incubation, allowing detailed visualization in various multicolor modalities. Biocompatibility assessments were conducted by analyzing human adipose-derived stem cell (hADSC) growth on PLA-CD scaffolds, with results substantiated through cell viability and morphological analyses. hADSCs reached a cell viability of 125% and penetrated throughout the scaffold after 21 days of incubation. These findings underscore the scaffolds' potential in bone regeneration and fluorescence imaging. The multifunctional nature of the PLA-CD nanocomposite, integrating diagnostic capabilities with tunable properties, positions it as a promising candidate for advancing bone tissue engineering. Our study not only highlights key aspects of the investigation but also underscores the scaffolds' specific application in bone regeneration, providing a foundation for further research and optimization in this critical biomedical field.
RESUMO
Carbon dots are carbon-based nanoparticles renowned for their intense light-emitting capabilities covering the whole visible light range. Achieving carbon dots emitting in the red region with high efficiency is extremely relevant due to their huge potential in biological applications and in optoelectronics. Currently, photoluminescence in such an energy interval is often associated with polyheterocyclic molecular domains forming during the synthesis that, however, present low emission efficiency and issues in controlling the optical features. Here, we overcome these problems by solvothermally synthesizing carbon dots starting from Neutral Red, a common red-emitting dye, as a molecular precursor. As a result of the synthesis, such molecular fluorophore is incorporated into a carbonaceous core while retaining its original optical properties. The obtained nanoparticles are highly luminescent in the red region, with a quantum yield comparable to that of the starting dye. Most importantly, the nanoparticle carbogenic matrix protects the Neutral Red molecules from photobleaching under ultraviolet excitation while preventing aggregation-induced quenching, thus allowing solid-state emission. These advantages have been exploited to develop a fluorescence-based color conversion layer by fabricating polymer-based highly concentrated solid-state carbon dot nanocomposites. Finally, the dye-based carbon dots demonstrate both stable Fabry-Perot lasing and efficient random lasing emission in the red region.
RESUMO
Plasmonic random lasers have drawn significant attention recently due to their versatility, low threshold, and the possibility of achieving tunable and coherent/incoherent outputs. However, in this Letter, the phenomenon of replica symmetry breaking is reported in intensity fluctuations of a rarely used colloidal plasmonic random laser (RL) illumination. Triangular nanosilver scatter particles produced incoherent RL action when used in a dimethylformamide (DMF) environment in a Rhodamine-6G gain medium. The use of gold-coated triangular nanosilver as the scatterer in place of triangular nanosilver offered a dual contribution of scattering and lower photo-reabsorption, which caused a reduction in the lasing threshold energy of 39% compared to that obtained with the latter. Further, due to its long-term photostability and chemical properties, a phase transition from the photonic paramagnetic to the glassy phase is observed experimentally in the RL system used. Interestingly, the transition occurs at approximately the lasing threshold value, which is a consequence of stronger correlation of modal behaviors at high input pump energies.
RESUMO
We report the synthesis and characterization of a novel type of nanohoop, consisting of a cycloparaphenylene derivative incorporating a curved heptagon-containing π-extended polycyclic aromatic hydrocarbon (PAH) unit. We demonstrate that this new macrocycle behaves as a supramolecular receptor of curved π-systems such as fullerenes C60 and C70 , with remarkably large binding constants (ca. 107 â M-1 ), as estimated by fluorescence measurements. Nanosecond and femtosecond spectroscopic analysis show that these host-guest complexes are capable of quasi-instantaneous charge separation upon photoexcitation, due to the ultrafast charge transfer from the macrocycle to the complexed fullerene. These results demonstrate saddle-shaped PAHs with dibenzocycloheptatrienone motifs as structural components for new macrocycles displaying molecular receptor abilities and versatile photochemical responses with promising electron-donor properties in host-guest complexes.
RESUMO
Nanographenes (NGs) have been attracting widespread interest since they combine peculiar properties of graphene with molecular features, such as bright visible photoluminescence. However, our understanding of the fundamental properties of NGs is still hampered by the high degree of heterogeneity usually characterizing most of these materials. In this context, NGs obtained by atomically precise synthesis routes represent optimal benchmarks to unambiguously relate their properties to well-defined structures. Here we investigate in deep detail the optical response of three curved hexa-peri-hexabenzocoronene (HBC) derivatives obtained by atomically precise synthesis routes. They are constituted by the same graphenic core, characterized by the presence of a heptagon ring determining a saddle distortion of their sp2 network, and differ from each other for slightly different edge functionalization. The quite similar structure allows for performing a direct comparison of their spectroscopic features, from steady-state down to the femtosecond scale, and precisely disentangling the role played by the different edge chemistry.
RESUMO
Ferritin nanoparticles play many important roles in theranostic and bioengineering applications and have been successfully used as nanovectors for the targeted delivery of drugs due to their ability to specifically bind the transferrin receptor (TfR1, or CD71). They can be either genetically or chemically modified for encapsulating therapeutics or probes in their inner cavity. Here, we analyzed a new engineered ferritin nanoparticle, made of the H chain mouse ferritin (HFt) fused with a specific lanthanide binding tag (LBT). The HFt-LBT has one high affinity lanthanide binding site per each of the 24 subunits and a tryptophane residue within the tag that acts as an antenna able to transfer the energy to the lanthanide ions via a LRET process. In this study, among lanthanides, we selected europium for its red emission that allows to reduce overlap with tissue auto-fluorescence. Steady state emission measurements and time-resolved emission spectroscopy have been employed to investigate the interaction between the HFt-LBT and the Eu3+ ions. This allowed us to identify the Eu3+ energy states involved in the process and to pave the way for the future use of HFt-LBT Eu3+ complex in theranostics.
RESUMO
Carbon dots (CDs) are a family of fluorescent nanoparticles displaying a wide range of interesting properties, which make them attractive for potential applications in different fields like bioimaging, photocatalysis, and many others. However, despite many years of dedicated studies, wide variations exist in the literature concerning the reported photostability of CDs, and even the photoluminescence mechanism is still unclear. Furthermore, an increasing number of recent studies have highlighted the photobleaching (PB) of CDs under intense UV or visible light beams. PB phenomena need to be fully addressed to optimize practical uses of CDs and can also provide information on the fundamental mechanism underlying their fluorescence. Moreover, the lack of systematic studies comparing several types of CDs displaying different fluorescence properties represents another gap in the literature. In this study, we explored the optical properties of a full palette of CDs displaying a range from blue to red emissions, synthesized using different routes and varying precursors. We investigated the photostability of different CDs by observing in situ their time-resolved fluorescence degradation or optical absorption changes under equivalent experimental conditions and laser irradiation. The results about different PB kinetics clearly indicate that even CDs showing comparable emission properties may exhibit radically different resistances to PB, suggesting systematic connections between the resistance to PB, the characteristic spectral range of emission, and CD quantum yields. To exploit the PB dynamics as a powerful tool to investigate CD photophysics, we also carried out dedicated experiments in a partial illumination geometry, allowing us to analyze the recovery of the fluorescence due to diffusion. Based on the experimental results, we conclude that the nature of the CD fluorescence cannot be solely ascribable to small optically active molecules free diffusing in solution, contributing to shed light on one of the most debated issues in the photophysics of CDs.
RESUMO
The origin of fluorescence in carbon dots (C-dots) is still a puzzling phenomenon. The emission is, in most of the cases, due to molecular fluorophores formed in situ during the synthesis. The carbonization during C-dots processing does not allow, however, a fine control of the properties and makes finding the source of the fluorescence a challenging task. In this work, we present a strategy to embed a pre-formed fluorescent molecule, safranin O dye, into an amorphous carbonaceous dot obtained by citric acid carbonization. The dye is introduced in the melted solution of citric acid and after pyrolysis remains incorporated in a carbonaceous matrix to form red-emitting C-dots that are strongly resistant to photobleaching. Embedding dyes in amorphous C-dots represents an alternative method to optimize the emission in the whole visible spectrum.
RESUMO
Among the photocatalysts which could be used for converting solar energy, polyoxometalates are often regarded as ideal candidates because of their remarkable performances in photocatalytic water splitting and photodegradation of pollutants. Nonetheless, these polyanions are only capable of absorbing UV light, unless coupled to a visible-light photosensitizer. Carbon nanodots are especially promising for this purpose because of their strong visible-light absorption, photostability, non-toxicity, and very low production costs. In this work we demonstrate the possibility of coupling carbon dots to polyoxometalates with different structures, by a simple self-assembly approach based on electrostatic interactions in solution phase. Our studies highlight an extremely efficient interaction between the two compounds, resulting in ultrafast photoinduced electron or energy transfer from carbon dots to the coupled polyoxometalates, depending on the structure of the latter, as revealed by a detailed study based on ultrafast transient absorption spectroscopy. The evidence herein provided shows how nanohybrids based on polyoxometalates photosensitized by carbon dots could find their place in photocatalytic applications, thanks to their remarkable efficiency and huge versatility.
Assuntos
Carbono , Elétrons , Catálise , Luz , PolieletrólitosRESUMO
Carbon nanodots (CDs) are a new class of carbon-based nanoparticles endowed with photoluminescence, high specific surface area, and good photothermal conversion, which have spearheaded many breakthroughs in medicine, especially in drug delivery and cancer theranostics. However, the tight control of their structural, optical, and biological properties and the synthesis scale-up have been very difficult so far. Here, we report for the first time an efficient protocol for the one-step synthesis of decagram-scale quantities of N,S-doped CDs with a narrow size distribution, along with a single nanostructure multicolor emission, high near-infrared (NIR) photothermal conversion efficiency, and selective reactive oxygen species (ROS) production in cancer cells. This allows achieving targeted and multimodal cytotoxic effects (i.e., photothermal and oxidative stresses) in cancer cells by applying biocompatible NIR laser sources that can be remotely controlled under the guidance of fluorescence imaging. Hence, our findings open up a range of possibilities for real-world biomedical applications, among which is cancer theranostics. In this work, indocyanine green is used as a bidentate SOx donor which has the ability to tune surface groups and emission bands of CDs obtained by solvothermal decomposition of citric acid and urea in N,N-dimethylformamide. The co-doping implies various surface states providing transitions in the visible region, thus eliciting a tunable multicolor emission from blue to red and excellent photothermal efficiency in the NIR region useful in bioimaging applications and image-guided anticancer phototherapy. The fluorescence self-tracking capability of SOx-CDs reveals that they can enter cancer cells more quickly than healthy cell lines and undergo a different intracellular fate after cell internalization. This could explain why sulfur doping entails pro-oxidative activities by triggering more ROS generation in cancer cells when compared to healthy cell lines. We also find that oxidative stress can be locally enhanced under the effects of a NIR laser at moderate power density (2.5 W cm-2). Overall, these findings suggest that SOx-CDs are endowed with inherent drug-independent cytotoxic effects toward cancer cells, which would be selectively enhanced by external NIR light irradiation and helpful in precision anticancer approaches. Also, this work opens a debate on the role of CD surface engineering in determining nanotoxicity as a function of cell metabolism, thus allowing a rational design of next-generation nanomaterials with targeted anticancer properties.
Assuntos
Antineoplásicos/farmacologia , Materiais Biocompatíveis/farmacologia , Carbono/farmacologia , Nanopartículas/química , Antineoplásicos/síntese química , Antineoplásicos/química , Materiais Biocompatíveis/química , Carbono/química , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Ensaios de Seleção de Medicamentos Antitumorais , Humanos , Raios Infravermelhos , Teste de Materiais , Estrutura Molecular , Imagem Óptica , Espécies Reativas de Oxigênio/metabolismoRESUMO
BACKGROUND: The new subgroup screening tool "subscreen" aims to understand the unclear and complex association between socioeconomic status (SES) and childhood allergy. This software R package has been successfully used in clinical trials but not in large population-based studies. OBJECTIVE: To screen and identify subgrouping factors explaining their impact on the association between SES and respiratory allergies in childhood and youth. METHODS: Using the national German childhood and youth survey dataset (KiGGS Wave 2), we included 56 suspected subgrouping factors to investigate the association between SES (low vs. high) and allergic rhinitis and/or asthma in an exploratory manner. The package enabled a comprehensive overview of odds ratios when considering the SES impact per subgroup and analogously all disease proportions per subgroup. RESULT: Among the 56 candidate factors, striking subgrouping factors were identified; e.g., if mothers were younger and in the low SES group, their children had a higher risk of asthma. In addition children of the teen's age were associated with increased risks in the low SES group. For the crude proportions, factors such as (parental) smoking or having had no "contact with farm animals" were identified as strong risk factors for rhinitis. SIGNIFICANCE: The "subscreen" package enabled the detection of notable subgroups for further investigations exemplarily for similar epidemiological research questions.
Assuntos
Asma , Hipersensibilidade , Rinite , Adolescente , Animais , Asma/diagnóstico , Asma/epidemiologia , Humanos , Hipersensibilidade/epidemiologia , Prevalência , Fatores de Risco , Classe Social , Fatores SocioeconômicosRESUMO
Carbon dots are an emerging family of zero-dimensional nanocarbons behaving as tunable light harvesters and photoactivated charge donors. Coupling them to carbon nanotubes, which are well-known electron acceptors with excellent charge transport capabilities, is very promising for several applications. Here, we first devised a route to achieve the stable electrostatic binding of carbon dots to multi- or single-walled carbon nanotubes, as confirmed by several experimental observations. The photoluminescence of carbon dots is strongly quenched when they contact either semiconductive or conductive nanotubes, indicating a strong electronic coupling to both. Theoretical simulations predict a favorable energy level alignment within these complexes, suggesting a photoinduced electron transfer from dots to nanotubes, which is a process of high functional interest. Femtosecond transient absorption confirms indeed an ultrafast (<100 fs) electron transfer independent of nanotubes being conductive or semiconductive in nature, followed by a much slower back electron transfer (≈60 ps) from the nanotube to the carbon dots. The high degree of charge separation and delocalization achieved in these nanohybrids entails significant photocatalytic properties, as we demonstrate by the reduction of silver ions in solution. The results are very promising in view of using these "all-carbon" nanohybrids as efficient light harvesters for applications in artificial photocatalysis and photosynthesis.
RESUMO
We report a study of carbon dots produced via bottom-up and top-down routes, carried out through a multi-technique approach based on steady-state fluorescence and absorption, time-resolved fluorescence spectroscopy, Raman spectroscopy, infrared spectroscopy, and atomic force microscopy. Our study focuses on a side-to-side comparison of the fundamental structural and optical properties of the two families of fluorescent nanoparticles, and on their interaction pathways with mercury ions, which we use as a probe of surface emissive chromophores. Comparison between the two families of carbon dots, and between carbon dots subjected to different functionalization procedures, readily identifies a few key structural and optical properties apparently common to all types of carbon dots, but also highlights some critical differences in the optical response and in the microscopic mechanism responsible of the fluorescence. The results also provide suggestions on the most likely interaction sites of mercury ions at the surface of carbon dots and reveal details on mercury-induced fluorescence quenching that can be practically exploited to optimize sensing applications of carbon dots.
RESUMO
BACKGROUND: Recent studies have analysed birth-related clavicular fractures to propose time frames for healing that could be applied to dating of all fractures in cases of suspected child abuse. OBJECTIVE: To assess differences in healing rates between femoral fractures and birth-related clavicular fractures in infants and young children. MATERIALS AND METHODS: A retrospective 5-year pilot study of femoral fractures in children younger than 3 years of age was performed. Anonymised radiographs were independently scored by two radiologists for stages of fracture healing. In cases of reader disagreement, radiographs were independently scored by a third radiologist. RESULTS: In total, 74 radiographs (30 children) met the inclusion criteria. Fracture healing evolved over time with subperiosteal new bone formation (SPNBF) appearing first, followed by callus then remodelling. A power calculation for a single proportion, with a level of confidence of 95% and a margin of error of 5%, showed that in a definitive study, 359 radiographs would be required. CONCLUSION: Although the overall pattern of healing is similar, in this small pilot study, the earliest times for SPNBF and callus formation in femoral fractures appeared to lag behind healing of birth-related clavicular fractures. Remodelling appeared earlier than remodelling of clavicular fractures. A power calculation has determined numbers of femoral radiographs (359) required for a definitive study.
Assuntos
Fraturas do Fêmur , Fraturas Ósseas , Criança , Pré-Escolar , Fraturas do Fêmur/diagnóstico por imagem , Consolidação da Fratura , Fraturas Ósseas/diagnóstico por imagem , Humanos , Lactente , Projetos Piloto , Radiografia , Estudos RetrospectivosRESUMO
We report a set of femtosecond (fs) transient absorption (TA) measurements following the dynamics of the so-called nonbridging oxygen hole center in silica, a model color center in wide bandgap amorphous solids, characterized by a very large Stokes shift between the UV excitation and its associated red emission at 1.9 eV. The changes in the TA spectrum were probed in the UV-visible range at various delays after photoexcitation and analyzed as a function of the UV excitation energy, in single-photon absorption conditions. The combination of the experiments helps to clarify the defect photocycle, highlighting how TA measurements with tunable UV excitation could represent a powerful tool to investigate the dynamics of color centers embedded in transparent materials.
RESUMO
Carbon-based nanomaterials, such as carbon dots (CDs) and graphene (Gr), feature outstanding optical and electronic properties. Hence, their integration in optoelectronic and photonic devices is easier thanks to their low dimensionality and offers the possibility to reach high-quality performances. In this context, the combination of CDs and Gr into new nanocomposite materials CDs/Gr can further improve their optoelectronic properties and eventually create new ones, paving the way for the development of advanced carbon nanotechnology. In this work, we have thoroughly investigated the structural and emission properties of CDs deposited on single-layer and bilayer graphene lying on a SiO2/Si substrate. A systematic Raman analysis points out that bilayer (BL) graphene grown by chemical vapor deposition does not always respect the Bernal (AB) stacking, but it is rather a mixture of twisted bilayer (t-BL) featuring domains with different twist angles. Moreover, in-depth micro-photoluminescence measurements, combined with atomic force microscopy (AFM) morphological analysis, show that CD emission efficiency is strongly depleted by the presence of graphene and in particular is dependent on the number of layers as well as on the twist angle of BL graphene. Finally, we propose a model which explains these results on the basis of photoinduced charge-transfer processes, taking into account the energy levels of the hybrid nanosystem formed by coupling CDs with t-BL/SiO2.
RESUMO
Carbon nanodots (CDs) have recently attracted attention in the field of nanomedicine because of the biocompatibility, cost-effective nature, high specific surface, good near infrared (NIR) photothermal conversion into heat and tunable fluorescence properties, which have paved the way toward incorporating use of CDs into innovative anticancer theranostic platforms. However, a reliable synthesis of CDs with established and controlled physiochemical proprieties is precluded owing to the lack of full manipulation of thermodynamic parameters during the synthesis, thus limiting their use in real world medical applications. Herein, we developed a robust solvothermal protocol which allow fine controlling of temperature and pressure in order to obtain CDs with tunable properties. We obtained different CDs by modulating the operating pressure (from 8 to 18.5 bar) during the solvothermal decomposition of urea and citric acid in N,N-dimethylformamide at fixed composition. Atomic force microscopy (AFM), Fourier transform infrared (FTIR), ultraviolet-visible (UV-vis) and fluorescence spectroscopy were used to assess the role of pressure in influencing size, optical and surface properties of the obtained CDs. While preliminary biological and anticancer performance of CDs was established on the MDA-MB-231 cell line, used as triple negative breast cancer model. Our results indicate that pressure impinge on the formation of carbon nanoparticles under solvothermal conditions and impart desired optical, size distribution, surface functionalization and anticancer properties in a facile way. However, we have highlighted that a strategic surface engineering of these CDs is needed to limit the adsorption of corona proteins and also to increase the average surface diameter, avoiding a rapid renal clearance and improving their therapeutic efficacy in vivo.
RESUMO
Semiconductor nanocrystals, or quantum dots (QDs), simultaneously benefit from inexpensive low-temperature solution processing and exciting photophysics, making them the ideal candidates for next-generation solar cells and photodetectors. While the working principles of these devices rely on light absorption, QDs intrinsically belong to the Rayleigh regime and display optical behavior limited to electric dipole resonances, resulting in low absorption efficiencies. Increasing the absorption efficiency of QDs, together with their electronic and excitonic coupling to enhance charge carrier mobility, is therefore of critical importance to enable practical applications. Here, we demonstrate a general and scalable approach to increase both light absorption and excitonic coupling of QDs by fabricating hierarchical metamaterials. We assemble QDs into crystalline supraparticles using an emulsion template and demonstrate that these colloidal supercrystals (SCs) exhibit extended resonant optical behavior resulting in an enhancement in absorption efficiency in the visible range of more than 2 orders of magnitude with respect to the case of dispersed QDs. This successful light trapping strategy is complemented by the enhanced excitonic coupling observed in ligand-exchanged SCs, experimentally demonstrated through ultrafast transient absorption spectroscopy and leading to the formation of a free biexciton system on sub-picosecond time scales. These results introduce a colloidal metamaterial designed by self-assembly from the bottom up, simultaneously featuring a combination of nanoscale and mesoscale properties leading to simultaneous photonic and excitonic coupling, therefore presenting the nanocrystal analogue of supramolecular structures.