Ultrafast Time Dynamics of Plasmonic Fractional Orbital Angular Momentum.

The creation and manipulation of optical vortices, both in free space and in two-dimensional systems such as surface plasmon polaritons (SPPs), has attracted widespread attention in nano-optics due to their robust topological structure. Coupled with strong spatial confinement in the case of SPPs, these plasmonic vortices and their underlying orbital angular momentum (OAM) have promise in novel light-matter interactions on the nanoscale with applications ranging from on-chip particle manipulation to tailored control of plasmonic quasiparticles. Until now, predominantly integer OAM values have been investigated. Here, we measure and analyze the time evolution of fractional OAM SPPs using time-resolved two-photon photoemission electron microscopy and near-field optical microscopy. We experimentally show the field's complex rotational dynamics and observe the beating of integer OAM eigenmodes at fractional OAM excitations. With our ability to access the ultrafast time dynamics of the electric field, we can follow the buildup of the plasmonic fractional OAM during the interference of the converging surface plasmons. By adiabatically increasing the phase discontinuity at the excitation boundary, we track the total OAM, leading to plateaus around integer OAM values that arise from the interplay between intrinsic and extrinsic OAM.

Interplay of Kinetic Limitations and Disintegration: Selective Growth of Hexagonal Boron Nitride and Borophene Monolayers on Metal Substrates.

The CVD growth of bielemental 2D-materials by using molecular precursors involves complex formation kinetics taking place at the surface and sometimes also subsurface regions of the substrate. Competing microscopic processes fundamentally limit the parameter space for optimal growth of the desired material. Kinetic limitations for diffusion and nucleation cause a high density of small domains and grain boundaries. These are usually overcome by increasing the growth temperature and decreasing the growth rate. In contrast, the nature of molecular precursors with limited thermal stability can result in dissociation and preferential desorption, leading to an undesired or ill-defined composition of the 2D-material. Here we demonstrate these constraints in a combined low-energy electron diffraction and low-energy electron microscopy study by examining the selective formation of single-layer hexagonal boron nitride (hBN) and borophene on Ir(111) using a borazine precursor. We derive a temperature-pressure phase diagram and apply classical nucleation theory to describe our results. By considering the competing processes, we find an optimum growth temperature for hBN of 950 °C. At lower temperatures, the hBN island density is increased, while at higher temperatures the precursor disintegrates and borophene is formed. Our results introduce an additional aspect that must be considered in any high-temperature growth of bielemental 2D-materials from single molecular precursors.

Angle-resolved photoelectron spectroscopy in a low-energy electron microscope.

Spectroscopic photoemission microscopy is a well-established method to investigate the electronic structure of surfaces. In modern photoemission microscopes, the electron optics allow imaging of the image plane, momentum plane, or dispersive plane, depending on the lens setting. Furthermore, apertures allow filtering of energy-, real-, and momentum space. Here, we describe how a standard spectroscopic and low-energy electron microscope can be equipped with an additional slit at the entrance of the already present hemispherical analyzer to enable an angle- and energy-resolved photoemission mode with micrometer spatial selectivity. We apply a photogrammetric calibration to correct for image distortions of the projective system behind the analyzer and present spectra recorded on Au(111) as a benchmark. Our approach makes data acquisition in energy-momentum space more efficient, which is a necessity for laser-based pump-probe photoemission microscopy with femtosecond time resolution.

Broad background in electron diffraction of 2D materials as a signature of their superior quality.

An unusually broad bell-shaped component (BSC) has been previously observed in surface electron diffraction on different types of 2D systems. It was suggested to be an indicator of uniformity of epitaxial graphene (Gr) and hexagonal boron nitride (hBN). In the current study we use low-energy electron microscopy and micro-diffraction to directly relate the BSC to the crystal quality of the diffracting 2D material. Specially designed lateral heterostructures were used to map the spatial evolution of the diffraction profile across different 2D materials, namely pure hBN, BCN alloy and pure Gr, where the alloy region exhibits deteriorated structural coherency. The presented results show that the BSC intensity has a minimum in the alloyed region, consequently showing that BSC is sensitive to the lateral domain size and homogeneity of the material under examination. This is further confirmed by the presence of a larger number of sharp moiré spots when the BSC is most pronounced in the pure hBN and Gr regions. Consequently, it is proposed that the BSC can be used as a diagnostic tool for determining the quality of the 2D materials.

Segregation-Enhanced Epitaxy of Borophene on Ir(111) by Thermal Decomposition of Borazine.

Like other 2D materials, the boron-based borophene exhibits interesting structural and electronic properties. While borophene is typically prepared by molecular beam epitaxy, we report here on an alternative way of synthesizing large single-phase borophene domains by segregation-enhanced epitaxy. X-ray photoelectron spectroscopy shows that borazine dosing at 1100 °C onto Ir(111) yields a boron-rich surface without traces of nitrogen. At high temperatures, the borazine thermally decomposes, nitrogen desorbs, and boron diffuses into the substrate. Using time-of-flight secondary ion mass spectrometry, we show that during cooldown the subsurface boron segregates back to the surface where it forms borophene. In this case, electron diffraction reveals a (6 × 2) reconstructed borophene χ6-polymorph, and scanning tunneling spectroscopy suggests a Dirac-like behavior. Studying the kinetics of borophene formation in low energy electron microscopy shows that surface steps are bunched during the borophene formation, resulting in elongated and extended borophene domains with exceptional structural order.

Ultrafast vector imaging of plasmonic skyrmion dynamics with deep subwavelength resolution.

Plasmonic skyrmions are an optical manifestation of topological defects in a continuous vector field. Identifying them requires characterization of the vector structure of the electromagnetic near field on thin metal films. Here we introduce time-resolved vector microscopy that creates movies of the electric field vectors of surface plasmons with subfemtosecond time steps and a 10-nanometer spatial scale. We image complete time sequences of propagating surface plasmons as well as plasmonic skyrmions, resolving all vector components of the electric field and their time dynamics, thus demonstrating dynamic spin-momentum coupling as well as the time-varying skyrmion number. The ability to image linear optical effects in the spin and phase structures of light in the single-nanometer range will allow for entirely novel microscopy and metrology applications.

Equilibrium shape of single-layer hexagonal boron nitride islands on iridium.

Large, high-quality layers of hexagonal boron nitride (hBN) are a prerequisite for further advancement in scientific investigation and technological utilization of this exceptional 2D material. Here we address this demand by investigating chemical vapor deposition synthesis of hBN on an Ir(111) substrate, and focus on the substrate morphology, more specifically mono-atomic steps that are always present on all catalytic surfaces of practical use. From low-energy electron microscopy and atomic force microscopy data, we are able to set up an extended Wulff construction scheme and provide a clear elaboration of different interactions governing the equilibrium shapes of the growing hBN islands that deviate from the idealistic triangular form. Most importantly, intrinsic hBN edge energy and interaction with the iridium step edges are examined separately, revealing in such way the importance of substrate step morphology for the island structure and the overall quality of 2D materials.

Temperature-Controlled Rotational Epitaxy of Graphene.

When graphene is placed on a crystalline surface, the periodic structures within the layers superimpose and moiré superlattices form. Small lattice rotations between the two materials in contact strongly modify the moiré lattice parameter, upon which many electronic, vibrational, and chemical properties depend. While precise adjustment of the relative orientation in the degree- and sub-degree-range can be achieved via careful deterministic transfer of graphene, we report on the spontaneous reorientation of graphene on a metallic substrate, Ir(111). We find that selecting a substrate temperature between 1530 and 1000 K during the growth of graphene leads to distinct relative rotational angles of 0°, ± 0.6°, ±1.1°, and ±1.7°. When modeling the moiré superlattices as two-dimensional coincidence networks, we can ascribe the observed rotations to favorable low-strain graphene structures. The dissimilar thermal expansion of the substrate and graphene is regarded as an effective compressive biaxial pressure that is more easily accommodated in graphene by small rotations rather than by compression.

Imaging the Nonlinear Plasmoemission Dynamics of Electrons from Strong Plasmonic Fields.

We use subcycle time-resolved photoemission microscopy to unambiguously distinguish optically triggered electron emission (photoemission) from effects caused purely by the plasmonic field (termed "plasmoemission"). We find from time-resolved imaging that nonlinear plasmoemission is dominated by the transverse plasmon field component by utilizing a transient standing wave from two counter-propagating plasmon pulses of opposite transverse spin. From plasmonic foci on flat metal surfaces, we observe highly nonlinear plasmoemission up to the fifth power of intensity and quantized energy transfer, which reflects the quantum-mechanical nature of surface plasmons. Our work constitutes the basis for novel plasmonic devices such as nanometer-confined ultrafast electron sources as well as applications in time-resolved electron microscopy.

Short-range surface plasmonics: Localized electron emission dynamics from a 60-nm spot on an atomically flat single-crystalline gold surface.

We experimentally and theoretically visualize the propagation of short-range surface plasmon polaritons using atomically flat single-crystalline gold platelets on silicon substrates. We study their excitation and subfemtosecond dynamics via normal-incidence two-photon photoemission electron microscopy. By milling a plasmonic disk and grating structure into a single-crystalline gold platelet, we observe nanofocusing of the short-range surface plasmon polariton. Localized two-photon ultrafast electron emission from a spot with a smallest dimension of 60 nm is observed. Our novel approach opens the door toward reproducible plasmonic nanofocusing devices, which do not degrade upon high light intensity or heating due to the atomically flat surface without any tips, protrusions, or holes. Our nanofoci could also be used as local emitters for ultrafast electron bunches in time-resolved electron microscopes.

Atomically smooth p-doped silicon nanowires catalyzed by aluminum at low temperature.

Silicon nanowires (SiNWs) are powerful nanotechnological building blocks. To date, a variety of metals have been used to synthesize high-density epitaxial SiNWs through metal-catalyzed vapor phase epitaxy. Understanding the impact of the catalyst on the intrinsic properties of SiNWs is critical for precise manipulation of the emerging SiNW-based devices. Here we demonstrate that SiNWs synthesized at low-temperature by ultrahigh vacuum chemical vapor deposition using Al as a catalyst present distinct morphological properties. In particular, these nanowires are atomically smooth in contrast to rough {112}-type sidewalls characteristic of the intensively investigated Au-catalyzed SiNWs. We show that the stabilizing effect of Al plays the key role in the observed nanowire surface morphology. In fact, unlike Au which induces (111) and (113) facets on the nanowire sidewall surface, Al revokes the reconstruction along the [112] direction leading to equivalent adjacent step edges and flat surfaces. Our finding sets the lower limit of the Al surface density on the nanowire sidewalls at ∼2 atom/nm(2). Additionally, despite using temperatures of ca. 110-170 K below the eutectic point, we found that the incorporation of Al into the growing nanowires is sufficient to induce an effective p-type doping of SiNWs. These results demonstrate that the catalyst plays a crucial role is shaping the structural and electrical properties of SiNWs.

Au stabilization and coverage of sawtooth facets on Si nanowires grown by vapor-liquid-solid epitaxy.

Si nanowires grown in UHV by Au-catalyzed vapor-liquid-solid epitaxy are known to exhibit sidewalls with {112}-type orientation that show faceting. To understand the origin of the faceting, Au induced faceting on Si(112) surfaces was studied in situ by spot-profile-analyzing low-energy electron diffraction. With increasing Au coverage at 750 degrees C, the Si(112) surface undergoes various morphological transformations until, at a critical Au coverage of about 3.1 x 10 (14) atoms/cm (2), a phase consisting of large (111) and (113) facets forms, similar in structure to the nanowire sidewalls. This phase is stable at larger Au coverages in equilibrium with Au droplets. We suggest that Si nanowire surfaces exhibit this structure, and we derive the Au coverage on the two types of facets.