Nanostructure of wet-chemically prepared, polymer-stabilized silver-gold nanoalloys (6 nm) over the entire composition range.

Bimetallic silver-gold nanoparticles were prepared by co-reduction using citrate and tannic acid in aqueous solution and colloidally stabilized with poly(N-vinylpyrrolidone) (PVP). The full composition range of silver : gold from 0 : 100 to 100 : 0 (n : n) was prepared with steps of 10 mol%. The nanoparticles were spherical, monodispersed, and had a diameter of ∼6 nm, except for Ag : Au 90 : 10 nanoparticles and pure Ag nanoparticles which were slightly larger. The size of the nanoalloys was determined by differential centrifugal sedimentation (DCS) and transmission electron microscopy (TEM). By means of X-ray powder diffraction (XRD) together with Rietveld refinement, precise lattice parameters, crystallite size and microstrain were determined. Scanning transmission electron microscopy (STEM) combined with energy-dispersive X-ray spectroscopy (EDX) and electron energy loss spectroscopy (EELS) showed that the particles consisted of a gold-rich core and a silver-rich shell. XRD and DCS indicated that the nanoparticles were not twinned, except for pure Ag and Ag : Au 90 : 10, although different domains were visible in the TEM. A remarkable negative deviation from Vegard's linear rule of alloy mixtures was observed (isotropic contraction of the cubic unit cell with a minimum at a 50 : 50 composition). This effect was also found for Ag:Au bulk alloys, but it was much more pronounced for the nanoalloys. Notably, it was much less pronounced for pure silver and gold nanoparticles. The microstrain was increased along with the contraction of the unit cell with a broad maximum at a 50 : 50 composition. The synthesis is based on aqueous solvents and can be easily scaled up to a yield of several mg of a well dispersed nanoalloy with application potential due to its tuneable antibacterial action (silver) and its optical properties for bioimaging.

Naked Au55 clusters: dramatic effect of a thiol-terminated dendrimer

Reaction of the thiol-terminated fourth-generation dendrimer 2-G4 (96 SH groups) with the gold cluster compound Au55(PPh3)12Cl6 in a 3:1 molar ratio in dichloromethane results in the formation of bare Au55 clusters. The cuboctahedrally shaped Au55 particles coalesce to well-formed microcrystals (Au55) infinity. The role of the dendrimer is not only to remove the phosphine and chlorine ligands but also to act as an ideal matrix for perfect crystal growth. Transmission electron microscopy (TEM), small- and wide-angle X-ray diffraction (SAXRD and WAXRD) measurements indicate a structure where rows of edge-linked Au55 building blocks form a distorted cubic lattice. The X-ray data fit best if a 5% reduction of the Au-Au bond length in the Au55 clusters is assumed, in agreement with previous extended X-ray absorption fine structure (EXAFS) measurements. Energy-dispersive X-ray spectroscopy (EDX) analyses and IR investigations show the absence of PPh3 and Cl in the microcrystals.

Strategies for the anchoring of metal complexes, clusters, and colloids inside nanoporous alumina membranes.

Two complementary strategies are presented for the anchoring of molecular palladium complexes, of cobalt or platinum clusters or of gold colloids inside the nanopores of alumina membranes. The first consists in the one step condensation of an alkoxysilyl functional group carried by the metal complex with the hydroxy groups covering the surface of the membrane pores. Thus, using the short-bite alkoxysilyl-functionalized diphosphane ligands (Ph2P)2N(CH2)3Si(OMe)3 (1) and (Ph2P)2N(CH2)4SiMe2(OMe)] (2) derived from (Ph2P)2NH (dppa) (dppa bis(diphenylphosphanyl)amine), the palladium complexes [Pd(dmba)(kappa2-P,P-(Ph2P)2N(CH2)3Si(OMe)3)] Cl (3) and [Pd(dmba)[kappa2-P,P-(Ph2P)2N(CH2)4SiMe2(OMe)]]Cl (4) (dmba-H = dimethylbenzylamine). respectively, were tethered to the pore walls. After controlled thermal treatment. confined and highly dispersed palladium nanoparticles were formed and characterized by transmission electron microscopy (TEM). This method could not be applied to the cobalt cluster [Co4(CO)8(mu-dppa)[mu-P,P-(Ph2P)2N(CH2)4SiMe2(OMe)]] (7) owing to its too limited solubility. However, its anchoring was achieved by using the second method which consisted of first derivatizing the pore walls with 1 or 2. The covalent attachment of the diphosphane ligands provides a molecular anchor that allows subsequent reaction with the cluster [Co4(CO)10(mu-dppa)] 6 to generate anchored 7 and this step was monitored by UV/Vis spectroscopy. In addition, the presence of carbonyl ligands in the cluster provides for the first time a very sensitive spectroscopic probe in the IR region which confirms both cluster incorporation and the retaining of its molecular nature inside the membrane. The presence of the bridging dppa ligand in 6 provides additional stabilization and accounts for the selectivity of the procedure. Using this method, platinum clusters (diameter ca. 2 nm) and gold colloids (diameter ca. 13 nm) were immobilized after passing their solution through the functionalized membrane pores. The resulting membranes were characterized by TEM which demonstrated the efficiency of the complexation and showed the high dispersion of the metal loading. The successful application of these methods has demonstrated that nanoporous alumina membranes are not only unique supports to incorporate metal complexes, clusters, or colloids but can also be regarded as functional matrices or microreactors, thus opening new fields for applications.