Application of a Carbon Fiber Microelectrode as a Sensor for Apocynin Electroanalysis.

In this study, a carbon fiber microelectrode (CF) was applied for the investigation of the electrochemical behavior of the natural antioxidant, apocynin (APO). Given the limited solubility of APO in water, a mixture of anhydrous acetic acid (AcH) with 20%, v/v acetonitrile (AN) and 0.1 mol L-1 sodium acetate (AcNa) was used. The electrochemical properties of APO were examined through linear sweep voltammetry (LSV), differential pulse voltammetry (DPV), and cyclic voltammetry (CV). The anodic oxidation of APO, which is the basis of the method used, proved to be diffusion-controlled and proceeded with a two-electron and one proton exchange. Both radicals and radical cations, arising from the first and second step of electrode reactions, respectively, underwent subsequent chemical transformations to yield more stable final products (EqCiEiCi mechanism). Using optimized DPV conditions, the anodic peak current of APO at a potential of 0.925 V vs. Ag/AgCl showed a good linear response within the concentration range of 2.7 × 10-6-2.6 × 10-4 mol L-1. The detection and quantification limits were determined as 8.9 × 10-7 and 2.7 × 10-6 mol L-1, respectively. The developed DPV method enabled the successful determination of APO in herbal extracts and in dietary supplements. It should be noted that this is the first method to be used for voltammetric determination of APO.

Electrochemical Characterization and Voltammetric Determination of Methylisothiazolinone on a Boron-Doped Diamond Electrode.

The electrochemical properties of methylisothiazolinone (MIT), the most widely used preservative, were investigated by cyclic (CV) and differential pulse voltammetry (DPV) to develop a new method for its determination. To our knowledge, this is the first demonstration of a voltammetric procedure for the determination of MIT on a boron-doped diamond electrode (BDDE) in a citrate-phosphate buffer (C-PB) environment. The anodic oxidation process of methylisothiazolinone, which is the basis of this method, proved to be diffusion-controlled and proceeded with an irreversible two-electron exchange. The radical cations, as unstable primary products, were converted in subsequent chemical reactions to sulfoxides and sulfones, and finally to more stable final products. Performed determinations were based on the DPV technique. A linear calibration curve was obtained in the concentration range from 0.7 to 18.7 mg L-1, with a correlation coefficient of 0.9999. The proposed procedure was accurate and precise, allowing the detection of MIT at a concentration level of 0.24 mg L-1. It successfully demonstrated its suitability for the determination of methylisothiazolinone in household products without the need for any separation steps. The proposed method can serve as an alternative to the prevailing chromatographic determinations of MIT in real samples.

Synthesis, Characterization and Biological Investigations of Half-Sandwich Ruthenium(II) Complexes Containing Benzimidazole Moiety.

Half-sandwich Ru(II) complexes belong to group of biologically active metallo-compounds with promising antimicrobial and anticancer activity. Herein, we report the synthesis and characterization of arene ruthenium complexes containing benzimidazole moiety, namely, [(η6-p-cymene)RuCl(bimCOO)] (1) and [(η6-p-cymene)RuCl2(bim)] (2) (where bimCOO = benzimidazole-2-carboxylate and bim = 1-H-benzimidazole). The compounds were characterized by 1H NMR, 13C NMR, IR, UV-vis and CV. Molecular structures of the complexes were determined by SC-XRD analysis, and the results indicated the presence of a pseudo-tetrahedral (piano stool) geometry. Interactions in the crystals of the Ru complexes using the Hirshfeld surface analysis were also examined. In addition, the biological studies of the complexes, such as antimicrobial assays (against planktonic and adherent microbes), cytotoxicity and lipophilicity, were performed. Antibacterial activity of the complexes was evaluated against S. aureus, E. coli, P. aeruginosa PAO1 and LES B58. Cytotoxic activity was tested against primary human fibroblasts and adenocarcinoma human alveolar basal epithelial cells. Obtained biological results show that the ruthenium compounds have bacteriostatic activity toward Pseudomonas aeruginosa PAO1 strain and are not toxic to normal cells. A molecular docking study was applied as a predictive source of information about the plausibility of examined structures binding with HSA as a transporting system.

Carbon Materials in Electroanalysis of Preservatives: A Review.

Electrochemical sensors in electroanalysis are a particularly useful and relatively simple way to identify electroactive substances. Among the materials used to design sensors, there is a growing interest in different types of carbon. This is mainly due to its non-toxic properties, low cost, good electrical conductivity, wide potential range, and the possibility of using it in both aqueous and nonaqueous media. The electrodes made of carbon, and especially of carbon modified with different materials, are currently most often used in the voltammetric analysis of various compounds, including preservatives. The objective of this paper is to present the characteristics and suitability of different carbon materials for the construction of working electrodes used in the voltammetric analysis. Various carbon materials were considered and briefly discussed. Their analytical application was presented on the example of the preservatives commonly used in food, cosmetic, and pharmaceutical preparations. It was shown that for the electroanalysis of preservatives, mainly carbon electrodes modified with various modifiers are used. These modifications ensure appropriate selectivity, high sensitivity, low limits of detection and quantification, as well as a wide linearity range of voltammetric methods of their identification and determination.

Voltammetric Determination of Isopropylmethylphenols in Herbal Spices.

Thymol and carvacrol-the components of herbal spices-are known for their broad biological activity as antimicrobials and antioxidants. For this reason, it is important to develop new methods for their determination in plant material. A simple, rapid, and sensitive method for determination of total content of these analytes in herbal spices using differential pulse voltammetry (DPV) has been developed. The basis of the research is the oxidation process of isopropylmethylphenols on a platinum microelectrode in glacial acetic acid containing acetonitrile (20%, v/v) and 0.1 mol L-1 sodium perchlorate as the supporting electrolyte. Linear voltammetric responses for thymol and carvacrol were obtained in a wide concentration range from 0.39-1105 and 0.47-640 µg mL-1, with a low detection limit of 0.04 and 0.05 µg mL-1, respectively. The analysis was performed using the multiple standard addition method. The results of the voltammetric determination are in good agreement with the data of the standard chromatographic method. To the best of our knowledge, this is the first presentation of an electrochemical procedure to determine these compounds in these environmental and electrode materials.

Tuning Anti-Biofilm Activity of Manganese(II) Complexes: Linking Biological Effectiveness of Heteroaromatic Complexes of Alcohol, Aldehyde, Ketone, and Carboxylic Acid with Structural Effects and Redox Activity.

The constantly growing resistance of bacteria to antibiotics and other antibacterial substances has led us to an era in which alternative antimicrobial therapies are urgently required. One promising approach is to target bacterial pathogens using metal complexes. Therefore, we investigated the possibility of utilizing series of manganese(II) complexes with heteroaromatic ligands: Alcohol, aldehyde, ketone, and carboxylic acid as inhibitors for biofilm formation of Pseudomonas aeruginosa. To complete the series mentioned above, Mn-dipyCO-NO3 with dipyridin-2-ylmethanone (dipyCO) was isolated, and then structurally (single-crystal X-ray analysis) and physicochemically characterized (FT-IR, TG, CV, magnetic susceptibility). The antibacterial activity of the compounds against representative Gram-negative and Gram-positive bacteria was also evaluated. It is worth highlighting that the results of the cytotoxicity assays performed (MTT, DHI HoloMonitorM4) indicate high cell viability of the human fibroblast (VH10) in the presence of the Mn(II) complexes. Additionally, the inhibition effect of catalase activity by the complexes was studied. This paper focused on such aspects as studying different types of intermolecular interactions in the crystals of the Mn(II) complexes as well as their possible effect on anti-biofilm activity, the structure-activity relationship of the Mn(II) complexes, and regularity between the electrochemical properties of the Mn(II) complexes and anti-biofilm activity.

Ruthenium(IV) Complexes as Potential Inhibitors of Bacterial Biofilm Formation.

With increasing antimicrobial resistance there is an urgent need for new strategies to control harmful biofilms. In this study, we have investigated the possibility of utilizing ruthenium(IV) complexes (H3O)2(HL1)2[RuCl6]·2Cl·2EtOH (1) and [RuCl4(CH3CN)2](L32)·H2O (2) (where L1-2-hydroxymethylbenzimadazole, L32-1,4-dihydroquinoxaline-2,3-dione) as effective inhibitors for biofilms formation. The biological activities of the compounds were explored using E. coli, S. aureus, P. aeruginosa PAO1, and P. aeruginosa LES B58. The new chloride ruthenium complexes were characterized by single-crystal X-ray diffraction analysis, Hirshfeld surface analysis, FT-IR, UV-Vis, magnetic and electrochemical (CV, DPV) measurements, and solution conductivity. In the obtained complexes, the ruthenium(IV) ions possess an octahedral environment. The intermolecular classical and rare weak hydrogen bonds, and π···π stacking interactions significantly contribute to structure stabilization, leading to the formation of a supramolecular assembly. The microbiological tests have shown complex 1 exhibited a slightly higher anti-biofilm activity than that of compound 2. Interestingly, electrochemical studies have allowed us to determine the relationship between the oxidizing properties of complexes and their biological activity. Probably the mechanism of action of 1 and 2 is associated with generating a cellular response similar to oxidative stress in bacterial cells.

Synthesis, Structural Characterization and Antimicrobial Evaluation of Ruthenium Complexes with Heteroaromatic Carboxylic Acids.

The antibacterial and antibiofilm activities of two new ruthenium complexes against E. coli, S. aureus, P. aeruginosa PAO1 (laboratory strain) and P. aeruginosa LES B58 (clinical strain) were evaluated. Complexes, mer-[RuIII (2-bimc)3 ] ⋅ H2 O (1) and cis-[RuIV Cl2 (2,3-pydcH)2 ] ⋅ 4H2 O (2), were obtained using aromatic carboxylic acid ligands, namely, 1H-benzimidazole-2-carboxylic acid (2-bimcH) and pyridine-2,3-dicarboxylic acid (2,3-pydcH2 ). Compounds were physicochemically characterized using X-ray diffraction, Hirshfeld surface analysis, IR and UV/VIS spectroscopies, as well as magnetic and electrochemical measurements. Structural characterization revealed that Ru(III) and Ru(IV) ions in the complexes adopt a distorted octahedral geometry. The intermolecular classical and weak hydrogen bonds, and π⋅⋅⋅π contacts significantly contribute to structure stabilization, leading to the formation of a supramolecular assembly. Biological studies have shown that the Ru complexes inhibit the growth of bacteria and biofilm formation by the tested strains and the complexes seem to be a potential as antimicrobial agents.

Ruthenium complexes in different oxidation states: synthesis, crystal structure, spectra and redox properties.

The reactions of a mother solution of RuCl(3) with benzimidazole derivatives 2-(2'-pyridyl)benzimidazole (2,2'-PyBIm, L(1)) and 2-hydroxymethylbenzimidazole (2-CH(2)OHBIm, L(2)) yielded three novel ruthenium complexes: (H(2)L(1))(2)[Ru(III)Cl(4)(CH(3)CN)(2)](2)[Ru(IV)Cl(4)(CH(3)CN)(2)]·2Cl·6H(2)O (1), mer-[Ru(III)Cl(3)L(1)(CH(3)CN)]·L(1)·3H(2)O (2), and (HL(2))(4)[Ru(IV)Cl(6)]·2Cl·4H(2)O (3). The isolated compounds were characterised by elemental analyses, UV-Vis and IR spectroscopy, and magnetic measurements. The nature of the ligands bound to the metal ions of these compounds and the experimental conditions significantly influenced the ruthenium complexes in different oxidation states. The N,N-donor ligand bound to the metal centre is a recognised stabiliser of the +III state of ruthenium, whereas the lack of ligand coordination promotes the formation of a mixed (Ru(III)/Ru(IV)) complex. In the case of complex 3, the absence of a N,O-donor ligand in the coordinate sphere facilitates the formation of the compound in a higher oxidation state. X-ray single crystal analyses revealed an octahedral geometry in each of the complexes. The crystal structure of ruthenium complexes is formed by a network of intermolecular classical and unconventional (C-H···π) hydrogen bonds. The most interesting feature of the supramolecular architecture of complexes is the existence of a very rare Cl(-)···π interaction and π···π stacking, which also contribute to structural stabilisation. Ruthenium compounds 2 and 3 behave as paramagnets with an octahedral geometry, corresponding to the presence of one or two unpaired electrons, respectively. The cyclic voltammetric data of complex 2 show three one-electron redox processes. The first redox couple is reversible, whereas the two other couples have a quasi-reversible nature. In the case of complex 3, two redox couples are reversible and the electrode processes are connected with exchange of one electron.

Anodic oxidation of oxidized forms of coenzymes Q(10) and Q(0) on carbon electrodes in acetic acid solutions.

The anodic oxidation of oxidized forms of coenzyme Q(10) (ubiquinone, CoQ(10)) and Q(0) (CoQ(0)) on a glassy carbon macroelectrode (GC) and on a carbon fiber microelectrode (CF) was investigated in acetic acid using voltammetric techniques. Voltammograms recorded on these electrodes show well-defined peaks or waves in the potential range of above 1.5 V (vs. Ag/AgCl). The existence of these signals cannot be connected with the well-known redox couple CoQ/CoQH(2) but may be attributed to the irreversible and diffusion-controlled two-electron oxidation of methoxy groups in molecules of coenzymes. The overall number of electrons involved in the anodic oxidation of CoQ(10) is higher than for CoQ(0). This indicates that oxidation also proceeds in an unsaturated isoprene side chain. Smaller oxidation potentials for CoQ(10) in comparison to such unsaturated fatty acids as oleic, linoleic and linolenic ones indicate that this compound can show direct antioxidative properties. The antioxidative power of CoQ(10) is much smaller than that of reduced CoQ(10) (ubiquinol) and α-tocopherol. The results presented can be useful in the determination of this compound in real samples and in the assessment of biochemical properties of CoQ(10) in living cells.

Anodic oxidation of 3,4-dihydroxyphenylacetic acid on carbon electrodes in acetic acid solutions.

The electrochemical oxidation of 3,4-dihydroxyphenylacetic acid (DOPAC) on a carbon fiber microelectrode (CF) and a glassy carbon macroelectrode (GC) in glacial acetic acid solutions was investigated using voltammetric techniques. Voltammograms recorded at these electrodes show well-defined single waves or peaks. The proposed mechanism of the anodic oxidation of DOPAC consists of two successive one-electron one-proton steps. The loss of the first electron proceeds irreversibly and determines the overall rate of the electrode process. This stage is accompanied by the generation of an unstable phenoxyl radical in position 4 of the aromatic ring. The second stage of the electrode reaction produces substituted orto-quinone as the final product of the electrode process of DOPAC. DOPAC exhibits more antioxidative power than synthetic BHT and can be useful in food protection against reactive oxygen species. The results presented can help to explain biochemical and antioxidative properties of DOPAC in a living cell and can be useful in determination of this compound in real samples.

Voltammetric determination of coenzyme Q10 in pharmaceutical dosage forms.

A simple and rapid voltammetric method has been developed for the quantitative determination of coenzyme Q(10) (CoQ(10)) in pharmaceutical preparations. Studies with differential pulse voltammetry (DPV) were carried out using a glassy carbon electrode (GCE) in a mixed solvent containing 80 vol.% acetic acid and 20 vol.% acetonitrile. A well-defined reduction peak of CoQ(10) was obtained at -20 mV vs. Ag/AgCl. The voltammetric technique applied provides a precise determination of CoQ(10) using the multiple standard addition method. The statistical parameters and the recovery study data clearly indicate good reproducibility and accuracy of the method. The accuracy of the results assessed by recovery trials was observed to be within the range of 101.1% to 102.5%. The detection and quantification limits were found to be 0.014 mM (12 mg L(-1)) and 0.046 mM (40 mg L(-1)), respectively. An analysis of real samples containing CoQ(10) showed no interferences with common additives and excipients, such as unsaturated fatty acids and soya lecithin. The method proposed does not require any pretreatment of the pharmaceutical dosage forms. A spectrophotometric determination of CoQ(10) in real samples diluted in mixtures containing ethanol and n-hexane was also performed for comparison.

Cathodic reduction of coenzyme Q10 on glassy carbon electrode in acetic acid-acetonitrile solutions.

The electrochemical reduction of coenzyme CoQ(10) and CoQ(0) on glassy carbon (GC) has been investigated in mixed solvent containing 80 vol.% acetic acid and 20 vol.% acetonitrile. A combination of cyclic voltammetry (CV) and rotating disk electrode technique (RDE) was employed to elucidate the mechanism of electrode processes. The results obtained were interpreted in terms of an E(r)E(q) mechanism involving the inverted ordering of formal potentials, i.e. E(2)(0')>E(1)(0'). The cathodic processes of both compounds consist of two successive one-electron one-proton steps, whereas the second electron transfer is thermodynamically more facile than the first. The processes occur with the generation of unstable semiquinone radicals as primary products. The results presented can help in explanation of the biochemical properties of CoQ(10) in the living cell.