Dynamics of mobile genetic elements of Listeria monocytogenes persisting in ready-to-eat seafood processing plants in France.

BACKGROUND: Listeria monocytogenes Clonal Complexes (CCs) have been epidemiologically associated with foods, especially ready-to-eat (RTE) products for which the most likely source of contamination depends on the occurrence of persisting clones in food-processing environments (FPEs). As the ability of L. monocytogenes to adapt to environmental stressors met in the food chain challenges the efforts to its eradication from FPEs, the threat of persistent strains to the food industry and public health authorities continues to rise. In this study, 94 food and FPEs L. monocytogenes isolates, representing persistent subtypes contaminating three French seafood facilities over 2-6 years, were whole-genome sequenced to characterize their genetic diversity and determine the biomarkers associated with long-term survival in FPEs. RESULTS: Food and FPEs isolates belonged to five CCs, comprising long-term intra- and inter-plant persisting clones. Mobile genetic elements (MGEs) such as plasmids, prophages and transposons were highly conserved within CCs, some of which harboured genes for resistance to chemical compounds and biocides used in the processing plants. Some of these genes were found in a 90.8 kbp plasmid, predicted to be" mobilizable", identical in isolates from CC204 and CC155, and highly similar to an 81.6 kbp plasmid from isolates belonging to CC7. These similarities suggest horizontal transfer between isolates, accompanied by deletion and homologous recombination in isolates from CC7. Prophage profiles characterized persistent clonal strains and several prophage-loci were plant-associated. Notably, a persistent clone from CC101 harboured a novel 31.5 kbp genomic island that we named Listeria genomic island 3 (LGI3), composed by plant-associated loci and chromosomally integrating cadmium-resistance determinants cadA1C. CONCLUSIONS: Genome-wide analysis indicated that inter- and intra-plant persisting clones harbour conserved MGEs, likely acquired in FPEs and maintained by selective pressures. The presence of closely related plasmids in L. monocytogenes CCs supports the hypothesis of horizontal gene transfer conferring enhanced survival to FPE-associated stressors, especially in hard-to-clean harbourage sites. Investigating the MGEs evolutionary and transmission dynamics provides additional resolution to trace-back potentially persistent clones. The biomarkers herein discovered provide new tools for better designing effective strategies for the removal or reduction of resident L. monocytogenes in FPEs to prevent contamination of RTE seafood.

Vibrio species involved in seafood-borne outbreaks (Vibrio cholerae, V. parahaemolyticus and V. vulnificus): Review of microbiological versus recent molecular detection methods in seafood products.

Seafood products are widely consumed all around the world and play a significant role on the economic market. Bacteria of the Vibrio genus can contaminate seafood and thus pose a risk to human health. Three main Vibrio species, V. cholerae, V. parahaemolyticus and V. vulnificus, are potentially pathogenic to humans. These species are responsible for a dramatic increase of seafood-borne infections worldwide. Hence, early detection of total and pathogenic Vibrio is needed and should rely on quick and effective methods. This review aims to present the standard methods FDA-BAM, ISO/TS 21872-1:2007 and TS 21872-2:2007 and compare them to recent molecular biology methods including endpoint PCR, quantitative real-time PCR (qPCR) and PCR-derived methods with a focus on LAMP (loop-mediated isothermal amplification). The available methods presented here are dedicated to the detection and identification of the Vibrio species of interest in seafood.

Viability Detection of Foodborne Bacterial Pathogens in Food Environment by PMA-qPCR and by Microscopic Observation.

Foodborne pathogens are responsible of foodborne diseases and food poisoning and thus pose a great threat to food safety. These microorganisms can adhere to surface and form a biofilm composed of an extracellular matrix. This extracellular matrix protects bacterial cells from industrial environmental stress factors such as cleaning and disinfection operations. Moreover, during these environmental stresses, many bacterial species can enter a viable but nonculturable (VBNC) state. VBNC cells are characterized by a loss of cultivability on conventional bacteriological agar. This leads to an underestimation of total viable cells in environmental samples, and thus poses a risk for public health. In this chapter, we present a method to detect viable population of foodborne pathogens in industrial environmental samples using a molecular method with a combination of propidium monoazide (PMA) and quantitative PCR (qPCR) and a fluorescence microscopic method associated with the LIVE/DEAD BacLight™ viability stain.

The absence of N-acetylglucosamine in wall teichoic acids of Listeria monocytogenes modifies biofilm architecture and tolerance to rinsing and cleaning procedures.

The wall teichoic acid (WTA) is the major carbohydrate found within the extracellular matrix of the Listeria monocytogenes biofilm. We first addressed the frequency of spontaneous mutations in two genes (lmo2549 and lmo2550) responsible for the GlcNAcylation in 93 serotype 1/2a strains that were mainly isolated from seafood industries. We studied the impact of mutations in lmo2549 or lmo2550 genes on biofilm formation by using one mutant carrying a natural mutation inactivating the lmo2550 gene (DSS 1130 BFA2 strain) and two EGD-e mutants that lack respective genes by in-frame deletion of lmo2549 or lmo2550 using splicing-by-overlap-extension PCR, followed by allelic exchange mutagenesis. The lmo2550 gene mutation, occurring in around 50% isolates, caused a decrease in bacterial adhesion to stainless steel compared to wild-type EGD-e strain during the adhesion step. On the other hand, bacterial population weren't significantly different after 24h-biofilm formation. The biofilm architecture was different between the wild-type strain and the two mutants inactivated for lmo2549 or lmo2550 genes respectively with the presence of bacterial micro-colonies for mutants which were not observed in the wild-type EGD-e strain biofilm. These differences might account for the stronger hydrophilic surface exhibited by the mutant cells. Upon a water flow or to a cleaning procedure at a shear stress of 0.16 Pa, the mutant biofilms showed the higher detachment rate compared to wild-type strain. Meanwhile, an increase in the amount of residual viable but non-culturable population on stainless steel was recorded in two mutants. Our data suggests that the GlcNAc residue of WTA played a role in adhesion and biofilm formation of Listeria monocyctogenes.

Comparative evaluation of DNA extraction methods for amplification by qPCR of superficial vs intracellular DNA from Bacillus spores.

This study was designed to assess the efficiency of eight extraction methods regarding their ability to release superficial (exogenous) and intracellular (endogenous) DNA from B. cereus spores for subsequent analysis by quantitative PCR (qPCR). B. cereus spore suspensions were subjected to both commercial DNA extraction kits and mechanical DNA extraction methods. The spores were observed by transmission electron microscopy to evaluate any damage caused during extraction. The efficiency of both extraction and purification were assessed using a qPCR assay targeting the bclA gene. Most of the extraction methods assessed, except the passage through the French press or the use of the QIAamp DNA Blood Mini kit without 95°C treatment, allowed the amplification of significant amounts of DNA. By using propidium monoazide, which is a photoreactive DNA-binding dye, the presence of non-negligible amounts of amplifiable DNA at the spore surface was highlighted. A further set of extraction assays was then performed on spores previously treated with PMA. The results of this study show that both superficial and intracellular spore DNA can be released by extraction methods to a greater or lesser extent and then further amplified by qPCR. The Precellys extraction allowed the detection of both intracellular and superficial DNA, the DNeasy Blood & Tissue kit the specific detection of intracellular DNA, while the Instagene kit detected only superficial DNA. Of the methods tested in this study, the Precellys extraction was the most efficient in terms of further DNA detection. SIGNIFICANCE AND IMPACT OF THE STUDY: In order to verify the presence or absence of B. cereus spores in food or on surfaces in the food environment, the use of an efficient extraction method is required, followed by a qPCR analysis on the DNA released. Conversely, in order to quantify the population of Bacillus spores, any superficial DNA must be blocked, e.g. with PMA, prior to intracellular DNA extraction and further amplification.

Teichoic acid is the major polysaccharide present in the Listeria monocytogenes biofilm matrix.

The aim of this study was to characterize the Listeria monocytogenes biofilm and particularly the nature of the carbohydrates in the biofilm extracellular matrix and culture supernatant versus to cell wall carbohydrates. Listeria monocytogenes serotype 1/2a and 4b strains were able to form complex biofilms embedded in an extracellular matrix. The soluble carbohydrates from biofilm extracellular matrix and culture supernatant were identified as teichoic acids, structurally identical to cell wall teichoic acids. In addition, the DSS 1130 BFA2 strain had a serotype 1/2a teichoic acid lacking N-acetyl glucosamine glycosylation due to a mutation in the lmo2550 gene. Consequently, we hypothesized that the extracellular teichoic acids in L. monocytogenes biofilms have the same origin as cell wall teichoic acid.

Design of challenge testing experiments to assess the variability of Listeria monocytogenes growth in foods.

The assessment of the evolution of micro-organisms naturally contaminating food must take into account the variability of biological factors, food characteristics and storage conditions. A research project involving eight French laboratories was conducted to quantify the variability of growth parameters of Listeria monocytogenes obtained by challenge testing in five food products. The residual variability corresponded to a coefficient of variation (CV) of approximately 20% for the growth rate (µ(max)) and 130% for the parameter K = µ(max) × lag. The between-batch and between-manufacturer variability of µ(max) was very dependent on the food tested and mean CV of approximately 20 and 35% were observed for these two sources of variability, respectively. The initial physiological state variability led to a CV of 100% for the parameter K. It appeared that repeating a limited number of three challenge tests with three different batches (or manufacturers) and with different initial physiological states seems often necessary and adequate to accurately assess the variability of the behavior of L. monocytogenes in a specific food produced by a given manufacturer (or for a more general food designation).

Impact of -2 degrees C superchilling before refrigerated storage (4 and 8 degrees C) on the microbiological and sensory qualities of cold-smoked salmon.

Detection and enumeration of Listeria monocytogenes and total spoilage bacteria in 40 batches of cold-smoked salmon (one batch = 42 products from the same day of manufacture) straight from the factory were carried out. If L. monocytogenes was detected in at least one of the nine samples analyzed on receipt at the laboratory, 9 products of the same batch were stored for 10 days at 4 degrees C, which was followed by 18 days at 8 degrees C (control), 12 products were superchilled for 14 days at -2 degrees C, and 12 other products were superchilled for 28 days at -2 degrees C and then stored under the same conditions as the control was stored. L. monocytogenes was detected in 7% of the 40 batches analyzed immediately after receipt at the laboratory. L. monocytogenes prevalence was similar (approximately 25%) throughout the storage at 4 and 8 degrees C, both in control and super-chilled products at -2 degrees C for 14 days. After superchilling for 28 days at -2 degrees C, L. monocytogenes was found in 9% of products, and in 39% at the end of the storage above 0 degree C. Moreover, the L. monocytogenes count was higher after 3 and 4 weeks of storage at 4 and 8 degrees C in products superchilled 28 days at -2 degrees C than in control products or in products superchilled for 14 days. Serotype 1/2a-3a and nine genetic groups were identified and found throughout the storage scenario. At the end of shelf life, sensory characteristics of products superchilled for 28 days at -2 degrees C were slightly modified. A decrease in firmness associated with increased tearing of salmon slices was observed as well as a slight amine odor.

Variable adhesion of Listeria monocytogenes isolates from food-processing facilities and clinical cases to inert surfaces.

One hundred one strains of Listeria monocytogenes isolated from seafood and cheese industry samples and from patients with listeriosis were assessed using a microtiter plate method for adhesion to polystyrene and stainless steel surfaces. The adhesion rate for these strains ranged from 3.10 to 35.29% with an inoculum of 8 x 10(8) cells per well. A strong correlation was found between adhesion to polystyrene and stainless steel microtiter plates, indicating that the intrinsic ability of L. monocytogenes to adhere to inert surfaces is stronger than the influence of the surface's physicochemical properties. The clinical strains were less adherent to inert surfaces than were the industrial strains. By integrating other factors such as location of the industrial strains, contamination type of the clinical strains, serotype, and pulsotype into the analysis, some weak but significant differences were noted. For the industrial isolates, the number of cells attached to both surfaces differed significantly depending on whether they were isolated from food or food-processing environments in the seafood and cheese industry. For clinical isolates, sporadic strains exhibited greater adhesion to polystyrene than did epidemic strains. Strains belonging to the pulsed-field gel electrophoretype clusters A and M (lineages II and I, respectively) were less able to adhere to polystyrene and stainless steel than were strains in the more common clusters.

Evaluation of the international reference methods NF EN ISO 11290-1 and 11290-2 and an in-house method for the isolation of Listeria monocytogenes from retail seafood products in france.

Retail seafood products were analyzed on their use-by date using the international reference methods NF EN ISO 11290-1 and 11290-2 (collectively method R) or an in-house method (method B) for the isolation of Listeria monocytogenes. The sensitivity of the methods was about 78%. Method R detected more positive samples of smoked salmon and herb-flavored slices of smoked salmon than did method B, whereas the reverse was true for samples of carpaccio-like salmon, herb-flavored slices of raw salmon, and smoked trout. Most products produced a positive result after the first of two enrichments, and little difference was observed after changing the isolation medium (Listeria selective agar, L. monocytogenes blood agar, agar for Listeria according to Ottaviani and Agosti, Oxford agar, and Palcam agar). L. monocytogenes was isolated from 151 (27.8%) of the 543 samples, with concentrations mostly below 100 CFU/g. The pathogen prevalence and concentration in these seafood products varied greatly depending on the producer and the nature of the product. In certain cases, these differences could be explained by problems in cleaning and disinfection operations in the food-processing environment. The identities of L. monocytogenes isolates were confirmed by PCR, and isolates were characterized by random amplification of polymorphic DNA and pulsed-field gel electrophoresis (PFGE). PFGE patterns obtained with the enzymes Apal and AscI produced 26 different pulsotypes. In general, different pulsotypes were present in the different categories of seafood products and were not specific to one producer. The genetic diversity observed in the products was not related to the prevalence found at the manufacturing site. It is therefore important for producers to determine the source(s) of contamination of their product so the risks linked to the presence of L. monocytogenes can be reduced.