Sustainable aerogels based on biobased poly (itaconic acid) for adsorption of cationic dyes.

This work reports the synthesis of poly (itaconic acid) by thermal polymerization mediated by 2,2'-Azobis(2-methylpropionamidine) dihydrochloride. Furthermore, physical hydrogels were prepared by using high molecular weight poly (itaconic acid) characterized by low dispersity and laponite RD. The hydrogels presented porous 3D network structures, with a high-water penetration of almost 2000 g/g of swelling ratio, which can allow the adsorption sites of both poly (itaconic acid) and laponite RD to be easily exposed and facilitate the adsorption of dyes. The water adsorption followed Schott's pseudo-second-order model. The mechanism of the adsorption process was investigated using 1H and 31P NMR. The hydrogel is able to fast adsorb by a combination of electrostatic interactions and hydrogen bonding by the synergic effect of the clay and poly (itaconic acid). Moreover, the prepared aerogels exhibited a fast removal of Basic Fuchsin, with an adsorption capacity of 67.56 mg/g and a high removal efficiency (~99 %). The adsorption followed the pseudo-second-order kinetic model and Langmuir isotherm model. Furthermore, the thermodynamic parameters showed that the BF process of adsorption was spontaneous and feasible, endothermic, and followed physisorption. These results indicated that the PIA/laponite-based aerogel can be considered a promising adsorbent material in textile wastewater treatment.

Insight into the aqueous Laponite® nanodispersions for self-assembled poly(itaconic acid) nanocomposite hydrogels: The effect of multivalent phosphate dispersants.

HYPOTHESIS: We hypothesize, that physical network between Laponite® nanoparticles and high molecular weight polyelectrolyte formed by mixing of Laponite® nanodispersion (containing multivalent phosphate dispersant) and polyelectrolyte solution is strongly influenced by the type and content of dispersant, which forms electric double layer (EDL) closely to the Laponite® edges. Thus, optimum dispersant concentration is necessary to overcome clay-clay interactions (excellent clay delamination), but should not be exceeded, what would result in the EDL compression and weakening of attractions forming clay-polyelectrolyte network. Thus, deeper investigation of Laponite® nanodispersions is highly demanded since it would enable to better design the self-assembled clay-polyelectrolyte hydrogels. EXPERIMENTS: To study clay interparticle interactions in the presence of various multivalent phosphates, complementary methods providing wide nanodispersion characterization have been applied: zeta potential measurement and SAXS technique (electrostatic interactions), oscillatory rheology (nanodispersion physical state) and NMR experiments (ion immobilization degree). FINDINGS: It was found that multivalent phosphates induce and tune strength of clay-polyelectrolyte interactions forming hydrogel network in terms of varying EDL on the Laponite® edges. Moreover, phosphate dispersing efficiency depends on the molecular size, chemical structure, and valence of the anion; its potential as efficient dispersant for hydrogel preparation can be evaluated by estimation of anion charge density.

High-Molecular-Weight Polyampholytes Synthesized via Daylight-Induced, Initiator-Free Radical Polymerization of Renewable Itaconic Acid.

Herein, it is reported for the first time that when mixed with choline chloride, itaconic acid (IA), normally a low-reactive vinyl monomer, undergoes initiator-free radical polymerization under normal daylight. Furthermore, the process results in the formation of abnormally high-molecular-weight poly(itaconic acid) derivatives with Mw greater than ≈800 000 g mol-1 . Detailed 1D/2D NMR studies indicate that the polymers have two types of ionizable moieties, that is, anionic carboxylic and cationic choline ester groups in an average molar ratio of 12:1. Potentiometric titration shows polyampholyte behavior of the polymers. Tentative mechanistic studies reveal that the daylight-induced polymerization is initiated by species generated via interactions of near UV light with IA. However, EPR findings show that choline also participates in secondary radical reactions. The obtained polyampholytes are useful bio-based materials for fast and straightforward fabrication of polymer-clay nanocomposite hydrogels with excellent mechanical properties.