RESUMO
The crystal structure of 4-methylcatechol (4MEC) has, to date, never been solved, despite its very simple chemical formula C7O2H8 and the many possible applications envisaged for this molecule. In this work, this gap is filled and the structure of 4MEC is obtained by combining X-ray powder diffraction and first principle calculations to carefully locate hydrogen atoms. Two molecules are present in the asymmetric unit. Hirshfeld analysis confirmed the reliability of the solved structure, since the two molecules show rather different environments and H-bond interactions of different directionality and strength. The packing is characterised by a peculiar hydrogen bond network with hydroxyl nests formed by two adjacent octagonal frameworks. It is noteworthy that the observed short contacts suggest strong inter-molecular interactions, further confirmed by strong inter-crystalline aggregation observed by microscopic images, indicating the growth, in many crystallization attempts, of single aggregates taller than half a centimetre and, often, with spherical shapes. These peculiarities are induced by the presence of methyl group in 4MEC, since the parent compound catechol, despite its chemical similarity, shows a standard layered packing alternating hydrophobic and polar layers. Finally, the complexity and peculiarity of the packing and crystal growth features explain why a single crystal could not be obtained for a standard structural analysis.
RESUMO
Salicylic and acetylsalicylic acids and ethacridine have complementary bioactive properties. They can be combined to obtain double-drug multicomponent crystals. Their reactivity in different environments was explored to obtain the possible compounds, stable at different hydration degrees. Solution, liquid-assisted grinding, and dry preparation approaches were applied to the couples of reactants in different stoichiometric ratios. Four compounds were obtained, and three out of them were stable and reproducible enough to determine their structures using SCXRD or PXRD methods. When coupled to ethacridine, salicylic acid gave two stable structures (1 and 3, both showing 1:1 ratio but different hydration degree) and a metastable one (5), while acetylsalicylic acid only one structure from solution (2 in 1:1 ratio), while LAG caused hydrolysis and formation of the same compound obtained by LAG of ethacridine with salicylic acid. While solution precipitation gave dihydrated (1) or monohydrated (2) structures with low yields, LAG of salicylic acid and ethacridine allowed obtaining an anhydrous salt complex (3) with a yield close to 1. The structures obtained by solution crystallizations maximize π(acridine)-π(acridine) contacts with a less compact packing, while the LAG structure is more compact with a packing driven by hydrogen bonds. For all compounds, NMR, ATR-FTIR, and Hirshfeld surface analysis and energy framework calculations were performed.
RESUMO
Nanocrystalline powders of monometallic and bimetallic imidazolates of Co, Zn and Ag were produced by a reaction carried out in water. The powders were characterized by powder X-ray diffraction and the crystal structures of the new compounds Ag2ZnIm4 and Ag2CoIm4 (Im = imidazolate) were solved. Heterometallic Co/Zn imidazolates showed the known Zn-zni crystal structure while Ag/Zn and Ag/Co systems were isostructural to the copper analogs. The powders were further characterized by EDX, UV-Vis and FTIR ATR spectroscopy in the solid state. The catalytic experiments indicated that out of the studied heterometallic compounds only Ag2Co(Im)4 exhibits some catalytic activity in the oxidation reaction of 1-phenylethanol with tert-butylhydroperoxide at elevated temperatures.
RESUMO
In materials and earth science, but also in chemistry, pharmaceutics and engineering, the quantification of elements and crystal phases in solid samples is often essential for a full characterization of materials. The most frequently used techniques for this purpose are X-ray fluorescence (XRF) for elemental analysis and X-ray powder diffraction (XRPD) for phase analysis. In both methods, relations between signal and quantity do exist but they are expressed in terms of complex equations including many parameters related to both sample and instruments, and the dependence on the active element or phase amounts to be determined is convoluted among those parameters. Often real-life samples hold relations not suitable for a direct quantification and, therefore, estimations based only on the values of the relative intensities are affected by large errors. Preferred orientation (PO) and microabsorption (MA) in XRPD cannot usually be avoided, and traditional corrections in Rietveld refinement, such as the Brindley MA correction, are not able, in general, to restore the correct phase quantification. In this work, a multivariate approach, where principal component analysis is exploited alone or combined with regression methods, is used on XRPD profiles collected on ad hoc designed mixtures to face and overcome the typical problems of traditional approaches. Moreover, the partial or no known crystal structure (PONKCS) method was tested on XRPD data, as an example of a hybrid approach between Rietveld and multivariate approaches, to correct for the MA effect. Particular attention is given to the comparison and selection of both method and pre-process, the two key steps for good performance when applying multivariate methods to obtain reliable quantitative estimations from XRPD data, especially when MA and PO are present. A similar approach was tested on XRF data to deal with matrix effects and compared with the more classical fundamental-parameter approach. Finally, useful indications to overcome the difficulties of the general user in managing the parameters for a successful application of multivariate approaches for XRPD and XRF data analysis are given.
RESUMO
Organo-modified layered materials characterization poses challenges due to their complexity and how other aspects such as contamination, preparation methods and degree of intercalation influence the properties of these materials. Consequently, a deep understanding of their interlayer organization is of utmost importance to optimize their applications. These materials can in fact improve the stability of photoactive molecules through intercalation, avoiding the quenching of their emission at the solid state, to facilitate their use in sensors or other devices. Two synthetic methods for the preparation of saponites with a cationic surfactant (CTABr) and a neutral chromophore (Fluorene) were tested and the obtained products were initially characterized with several complementary techniques (XRPD, SEM, TGA, IR, UV-Vis, Fluorescence and Raman spectroscopy), but a clear understanding of the organization of the guest molecules in the material could not be obtained by these techniques alone. This information was obtained only by thermogravimetry coupled with gas chromatography and mass spectroscopy (TGA-GC-MS) which allowed identifying the species present in the sample and the kind of interaction with the host by distinguishing between intercalated and adsorbed on the surface.
Assuntos
Silicatos de Alumínio , Tensoativos , Cromatografia Gasosa-Espectrometria de Massas , TermogravimetriaRESUMO
Non-invasive prenatal testing (NIPT) screens for common fetal chromosomal abnormalities through analysis of circulating cell-free DNA in maternal blood by massive parallel sequencing. NIPT reliability relies on both the estimation of the fetal fraction (ff) and on the sequencing depth (sd) but how these parameters are linked is unknown. Several bioinformatics tools have been developed to determine the ff but there is no universal ff threshold applicable across diagnostics laboratories. Thus, we developed two tools allowing the implementation of a strategy for NIPT results validation in clinical practice: GenomeMixer, a semi-supervised approach to create synthetic sequences and to estimate confidence intervals for NIPT validation and TRUST to estimate the reliability of NIPT results based on confidence intervals found in this study. We retrospectively validated these new tools on 2 cohorts for a total of 1439 samples with 31 confirmed aneuploidies. Through the analysis of the interrelationship between ff, sd and chromosomal aberration detection, we demonstrate that these parameters are profoundly connected and cannot be considered independently. Our tools take in account this critical relationship to improve NIPT reliability and facilitate cross laboratory standardization of this screening test.
RESUMO
Noninvasive prenatal testing (NIPT) consists of determining fetal aneuploidies by quantifying copy number alteration from the sequencing of cell-free DNA (cfDNA) from maternal blood. Due to the presence of cfDNA of fetal origin in maternal blood, in silico approaches have been developed to accurately predict fetal aneuploidies. Although NIPT is becoming a new standard in prenatal screening of chromosomal abnormalities, there are no integrated pipelines available to allow rapid, accurate and standardized data analysis in any clinical setting. Several tools have been developed, however often optimized only for research purposes or requiring enormous amount of retrospective data, making hard their implementation in a clinical context. Furthermore, no guidelines have been provided on how to accomplish each step of the data analysis to achieve reliable results. Finally, there is no integrated pipeline to perform all steps of NIPT analysis. To address these needs, we tested several tools for performing NIPT data analysis. We provide extensive benchmark of tools performances but also guidelines for running them. We selected the best performing tools that we benchmarked and gathered them in a computational pipeline. NiPTUNE is an open source python package that includes methods for fetal fraction estimation, a novel method for accurate gender prediction, a principal component analysis based strategy for quality control and fetal aneuploidies prediction. NiPTUNE is constituted by seven modules allowing the user to run the entire pipeline or each module independently. Using two cohorts composed by 1439 samples with 31 confirmed aneuploidies, we demonstrated that NiPTUNE is a valuable resource for NIPT analysis.
Assuntos
Ácidos Nucleicos Livres , Teste Pré-Natal não Invasivo , Aneuploidia , Ácidos Nucleicos Livres/genética , Feminino , Humanos , Gravidez , Diagnóstico Pré-Natal/métodos , Estudos RetrospectivosRESUMO
Mechanical properties such as the Young modulus, shear modulus and Poisson's coefficient are very important to define different materials applications, for basic research and for quality control procedures. Impulse excitation technique (IET) is a non-destructive, easy and fast method for characterization of elastic and acoustic properties of materials. The technique consists in sending a mechanical impulse in a sample and measuring the output sound wave. Commercial instruments are widely spread in metal industry, but they are not diffused in academic research centres. Such instruments can be easily self-built at low cost, allowing a much wider diffusion and exploitation in many fields involving materials characterization, since they guarantee high precision and high data reproducibility. For a proper acoustic characterization, necessary to obtain reliable mechanical data, a calibration of the instrument must be performed, for a proper association of the acoustic response to the features of each specific material. In this data article, a data set of impulses, collected on different materials by a self-built instrument for IET, named IETeasy, is provided for mechanical properties characterization by a self-built IET tool, and multivariate statistical analysis purposes. The aim is double in the short term: on one hand, providing a verified data set useful to develop, test and verify methods of analysis and tailor the IETeasy instrument on the needs of each specific user; on the other hand, giving a benchmark for any one designing, building and testing his IET home-made instrument. In the long term, since the data base is open, any contribution consisting in data collected by similar self-made or commercial instruments can be added to the data base, with the aim of building a large collection of data, useful for automatic recognition of sound outputs by machine learning or other multivariate or monovariate data analysis approaches, and for instrument performance comparison and alignment.
RESUMO
Low-cost, environmentally friendly and easily applicable coating for Mg alloys, able to resist in real world conditions, are studied. Coatings already used for other metals (aluminum, steel) and never tested on Mg alloy for its different surface and reactivity were deposited on AM60 magnesium alloys to facilitate their technological applications, also in presence of chemically aggressive conditions. A biobased PA11 powder coating was compared to synthetic silicon-based and polyester coatings, producing lab scale samples, probed by drop deposition tests and dipping in increasingly aggressive, salty, basic and acid solutions, at RT and at higher temperatures. Coatings were analyzed by SEM/EDX to assess their morphology and compositions, by optical and IR-ATR microscopy analyses, before and after the drop tests. Migration analyses from the samples were performed by immersion tests using food simulants followed by ICP-OES analysis of the recovered simulant to explore applications also in the food contact field. A 30 µm thick white lacquer and a 120 µm PA11 coating resulted the best solutions. The thinner siliconic and lacquer coatings, appearing brittle and thin in the SEM analysis, failed some drop and/or dipping test, with damages especially at the edges. The larger thickness is thus the unique solution for edgy or pointy samples. Finally, coffee cups in AM60 alloy were produced, as real word prototypes, with the best performing coatings and tested for both migration by dipping, simulating also real world aging (2 h in acetic acid at 70° and 24 h in hot coffee at 60 °C): PA11 resulted stable in all the tests and no migration of toxic metals was observed, resulting a promising candidate for many real world application in chemically aggressive environments and also food and beverage related applications.
Assuntos
Ligas/química , Ligas/economia , Materiais Revestidos Biocompatíveis/química , Materiais Revestidos Biocompatíveis/economia , Custos e Análise de Custo , Meio Ambiente , Alimentos , Magnésio/economia , Magnésio/química , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Micro-absorption (MA) and/or preferred orientations (PO) are two among the major problems affecting quantitative phase analysis (QPA) by X-ray Powder Diffraction Data (XRPD) in industrial samples such as minerals and ores, additives, cements, friction materials, coal combustion by-products. Typically XRPD data are coupled to elemental analysis by X-ray Fluorescence (XRF) to facilitate phase recognition and quantification when elements heavier than sodium are present. Graphite and urea are typical examples of large production industrial commodities showing such analytical problems. The present article provides a recipe to produce sets of data of increasing difficulty to test the performances of different approaches and/or software's for QPA by XRPD in graphite, zinc acetate and urea containing samples. Graphite, due to its platelet morphology, can exhibit orientation and was chosen because it is possible to control its PO degree by sieving. Simplex-centroid design augmented was used for the design of the experiments to select the mixtures with the more possible homogeneous exploration of the ternary experimental domains, from pure phase to equal-weighted mixtures. The different data sets collected on the four experimental domains by XRF and XRPD are provided and stored as a repository on Mendeley Data. Using the same approach, additional data sets sets with different composition and/or experimental setup can be added by us or any other contributor with the same DoE approach to create a wide open access data set of standardized X-ray powder diffraction and X-ray fluorescence data.
RESUMO
Three new titanium oxo-clusters Ti4O2(OiPr)10(OOCPhMe)2 (I), Ti6O4(OEt)8(OOCPhMe)8 (II) and Ti6O6(OEt)6(OOCCHPh2)6 (III) were obtained by easy one-step solvothermal reactions of titanium(iv) isopropoxide, alcohols and carboxylic acids. The three compounds were characterized by single-crystal and powder X-ray diffraction, TGA/DSC, optical and electron microscopy, and FTIR and NMR spectroscopy. X-ray powder diffraction and spectroscopy confirmed the purity of the compounds. Structural analysis indicates that in all compounds the titanium(iv) ions are six-coordinated (distorted octahedra). (I) is a tetranuclear complex containing a Ti4(µ4-O)(µ2-O) core, which is linked by two (µ2-OOCPhMe), four (µ2-OiPr) and six OiPr ligands. (II) and (III) are hexanuclear complexes with different cores, respectively Ti6(µ3-O)2(µ2-O)2 and Ti6(µ3-O)6. The coordination sphere of the Ti atoms is filled by eight (µ2-OOCPhMe), two (µ2-OEt) and six OEt in (II) and six (µ2-OOCHPh2) and six OEt in (III). Different steric hindrance of substituents attached to the carboxyl group or different concentrations lead to three main different cluster geometries with two ligands. The tetranuclear and the hexanuclear clusters were obtained with the OOCPhMe ligand, while the hexagonal prism cluster was obtained with the OOCCHPh2 ligand. Hirshfeld surface calculations indicated that the packing is driven by C-Oâ¯H-C weak hydrogen bonds. The clusters can be used as molecular models of organic molecules bonded to titania surface, used in organic photovoltaic (dye sensitized solar cells) or other optoelectronic applications.
RESUMO
In the past twenty years, impulse excitation technique (IET) has become a widely diffused non-destructive technique in metal industry field. This success resides in its capability to determine with high precision and accuracy some elastic properties of materials, such as Young's modulus, shear modulus and Poisson's ratio. The technique, which is very fast and non-destructive, consists in exciting a sample by a mechanical input and registering the acoustic output that, once analyzed by Fast Fourier-Transformation (FFT), provides the resonant frequencies of the sample, with a fast data analysis procedure. The approach is thus very easy to be applied to most materials and cost and time effective. Despite these many advantages, IET is still an under exploited technique in academic research centres, that mainly rely on traditional destructive methods for the evaluation of such properties, for instance by the measurement of strain-stress curves. Commercial IET instruments, similarly to traditional ones, have costs spanning from many hundreds to thousands of dollars, limiting their diffusion in academic world but also in small companies with limited R&D or quality control expenses. Non-professional instruments can also give very precise results and can be successfully used in basic research and in quality control even if not certified as commercial ones. Moreover they can be easily customized according to specific user needs and sample features. Since no examples of low cost IET designs can still be found in the scientific literature, we fill the gap in this paper, giving instructions for a self-assembled instrument for IET analysis, with a cost in the range of 70-85 USD. Moreover, the collected calibration data are analyzed to prove that the instrument can be used for other purposes than the common elastic properties determination, but also for a fast and cheap material characterization exploiting a multivariate analysis approach. Calibration results show that IETeasy can be used in both academic and industrial field for quality control purposes as a low-cost, fast and efficient alternative to tensometers. Principal component analysis, applied in this paper for the first time to IET data analysis, was able to distinguish and classify steel from Al or Cu alloys from polymers, but also different steel grades, demonstrating its potential in massive and eventually automatic IET data analysis. Calculated mechanical properties fitted with good approximation the ranges expected for each sample.
RESUMO
Composite lightweight materials for X-ray shielding applications were studied anddeveloped with the goal of replacing traditional screens made of lead and steel, with innovativematerials with similar shielding properties, but lighter, more easily formed and workable, with lowerimpact on the environment and reduced toxicity for human health. New epoxy-based compositesadditivated with barium sulfate and bismuth oxide were designed through simulations performedwith software based on Geant4. Then, they were prepared and characterized using differenttechniques starting from digital radiography in order to test the radiopacity of the composites,in comparison with traditional materials. The lower environmental impact and toxicity of theseinnovative screens were quantified by Life Cycle Assessment (LCA) calculation based on the ecoinventdatabase, within the openLCA framework. Optimized mixtures are (i) 20% epoxy/60% bismuthoxide/20% barite, which guarantees the best performance in X-ray shielding, largely overcomingsteel, but higher in costs and a weight reduction of circa 60%; (ii) 20% epoxy/40% bismuth oxide/40%barite which has slightly lower performances in shielding, but it is lighter and cheaper than thefirst one and (iii) the 20% epoxy/20% bismuth oxide/60% barite which is the cheapest material, stillmaintaining the X-ray shielding of steel. Depending on the cost/efficiency request of the specificapplication (industrial ra.
Assuntos
Sulfato de Bário/química , Bismuto/química , Resinas Epóxi/síntese química , Resinas Epóxi/química , Dureza , Peso Molecular , Intensificação de Imagem Radiográfica , SoftwareRESUMO
Plasticized-Poly(vinyl chloride) (P-PVC) for cables and insulation requires performances related to outdoor, indoor and submarine contexts and reduction of noxious release of HCl-containing fumes in case of thermal degradation or fire. Introducing suitable nanomaterials in polymer-based nanocomposites can be an answer to this clue. In this work, an industry-compliant cable-grade P-PVC formulation was added with nanostructured materials belonging to the family of Polyhedral Oligomeric Silsesquioxane (POSS). The effects of the nanomaterials, alone and in synergy with HCl scavenging agents as zeolites and hydrotalcites, on the thermal stability and HCl evolution of P-PVC were deeply investigated by thermogravimetric analysis and reference ASTM methods. Moreover, hardness and mechanical properties were studied in order to highlight the effects of these additives in the perspective of final industrial uses. The data demonstrated relevant improvements in the thermal stability of the samples added with nanomaterials, already with concentrations of POSS down to 0.31 phr and interesting additive effects of POSS with zeolites and hydrotalcites for HCl release reduction without losing mechanical performances.
RESUMO
The exact recipe to prepare the ancient Maya Blue (MB), an incredibly resistant and brilliant pigment prepared from indigo (dye) and Palygorskite (clay), is lost to the ages. To unravel the key features of the MB formation process, several inorganic-dye couples were heated to 200 °C and cooled to RT, to investigate their reactivity and the diffusion and degree of sequestration of the dye into the inorganic host. In situ XRPD/PDF and fiber optic reflectance spectroscopy (FORS) data, along with TGA, provided a comprehensive overview on MB formation mechanism. XRPD/PDF gave information on long/short range behaviors of water desorption/adsorption and indigo sequestration, while TGA and in situ FORS gave information on mass and optical changes within temperature. Ex situ dye removal was used to understand the sample stability after the thermal treatment. A statistical approach based on principal component analysis was exploited to efficiently and jointly analyze the ≈3000 collected patterns. MB formation starts below 110 °C with disordered distribution of indigo within the channels, reaching maximum reaction speed and higher ordering at 150 °C. Above 175 °C, color changes and a stronger sequestration of indigo into framework channels are observed, whereas the affinity for water is dramatically reduced. The origin of different colors, hues, and stability in historical MB samples can then be explained in terms of different thermal histories of the starting mechanical indigo/palygorskite mixtures.
RESUMO
The control of nanostructuration of graphene and graphene related materials (GRM) into self-assembled structures is strictly related to the nanoflakes chemical functionalization, which may be obtained via covalent grafting of non-covalent interactions, mostly exploiting π-stacking. As the non-covalent functionalization does not affect the sp2 carbon structure, this is often exploited to preserve the thermal and electrical properties of the GRM and it is a well-known route to tailor the interaction between GRM and organic media. In this work, non-covalent functionalization of graphite nanoplatelets (GnP) was carried out with ad-hoc synthesized pyrene-terminated oligomers of polylactic acid (PLA), aiming at the modification of GnP nanopapers thermal properties. PLA was selected based on the possibility to self-assemble in crystalline domains via stereocomplexation of complementary poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA) enantiomers. Pyrene-initiated PLLA and PDLA were indeed demonstrated to anchor to the GnP surface. Calorimetric and X-ray diffraction investigations highlighted the enantiomeric PLAs adsorbed on the surface of the nanoplatelets self-organize to produce highly crystalline stereocomplex domains. Most importantly, PLLA/PDLA stereocomplexation delivered a significantly higher efficiency in nanopapers heat transfer, in particular through the thickness of the nanopaper. This is explained by a thermal bridging effect of crystalline domains between overlapped GnP, promoting heat transfer across the nanoparticles contacts. This work demonstrates the possibility to enhance the physical properties of contacts within a percolating network of GRM via the self-assembly of macromolecules and opens a new way for the engineering of GRM-based nanostructures.
RESUMO
The increasing efficiency of detectors and brightness of X-rays in both laboratory and large-scale facilities allow the collection of full single-crystal X-ray data sets within minutes. The analysis of these `crystallographic big data' requires new tools and approaches. To answer these needs, the use of principal component analysis (PCA) is proposed to improve the efficiency and speed of the analysis. Potentialities and limitations of PCA were investigated using single-crystal X-ray diffraction (XRD) data collected in situ on Y zeolite, in which CO2, acting as an active species, is thermally adsorbed while cooling from 300 to 200â K. For the first time, thanks to the high sensitivity of single-crystal XRD, it was possible to determine the sites where CO2 is adsorbed, the increase in their occupancy while the temperature is decreased, and the correlated motion of active species, i.e. CO2, H2O and Na+. PCA allowed identification and elimination of problematic data sets, and better understanding of the trends of the occupancies of CO2, Na+ and water. The quality of the data allowed for the first time calculation of the enthalpy (ΔH) and entropy (ΔS) of the CO2 adsorption by applying the van 't Hoff equation to in situ single-crystal data. The calculation of thermodynamic values was carried out by both traditional and PCA-based approaches, producing comparable results. The obtained ΔH value is significant and involves systems (CO2 and Y zeolite) with no toxicity, superb stability and chemical inertness. Such features, coupled with the absence of carbonate formation and framework inertness upon adsorption, were demonstrated for the bulk crystal by the single-crystal experiment, and suggest that the phenomenon can be easily reversed for a large number of cycles, with CO2 released on demand. The main advantages of PCA-assisted analysis reside in its speed and in the possibility of it being applied directly to raw data, possibly as an `online' data-quality test during data collection, without any a priori knowledge of the crystal structure.
RESUMO
The GdIII-complexes of DO3A-acetophenone and ortho- or para- hydroxyacetophenone ligands have been investigated to assess the effect of the presence of a phenol group on the relaxivity and on the water exchange rate of these potential MRI contrast agents. H-Bonding between the ortho-phenol(ate) groups and the water molecules involved in the dissociative exchange mechanism is shown to speed up the water exchange rate by stabilizing the eight-coordinate transition state.
RESUMO
This work reports on the positive impact of (i) attaching methoxy groups at the ortho position of the bipyridine ligand (6,6'-dimethoxy-2,2'-bipyridine) in heteroleptic copper(I) complexes belonging to the [Cu(bpy)(POP)]+ family, and (ii) a new device design comprising a multilayered architecture to decouple hole/electron injection and transport processes on the performance of light-emitting electrochemical cells (LECs). In short, the substituted complex showed enhanced thermal- and photostability, photoluminescence, and ionic conductivity features in thin films compared to those of the archetypal complex without substitution. These beneficial features led to LECs outperforming reference devices in terms of luminance, stability, and efficacy. Furthermore, a new device design resulted in a 10-fold enhancement of the stability without negatively affecting the other figures of merit. Here, hole/electron injection and transport processes are performed at two different layers, while electron injection and electron-hole recombination occur at the copper(I) complex layer. As such, this work provides further insights into a smart design of N^N ligands for copper(I) complexes, opening the path to a simple device architecture toward an enhanced electroluminescence response.
RESUMO
Solid-state reactivity is often studied by in situ experiments with a multi-technique approach, where complementarity of different probes is exploited. In situ data are usually analysed using a complex protocol: first the reaction model most suited to describe the specific solid-state reaction is chosen, second the reaction coordinate is obtained from the data, the order of reaction is then calculated by applying a specific kinetic equation, and finally kinetic parameters are obtained with an Arrhenius plot. The approach is both time consuming and subject to errors due to the arbitrariness of extraction of the reaction coordinate, typically from individual peak intensity variations during the reaction. In addition, application of the different kinetic equations to obtain the best fitting one is tedious and no general method to select the best model with an unbiased approach is available. Here we propose a new procedure based on principal component analysis to get kinetic information from in situ data, which simplifies and speeds up the process of kinetic parameter calculation from a three- to a two- or even a one-step form, reaching a high degree of automation and the ability to manage the huge amount of data produced by in situ multi-technique experiments. The new approach treats data as a whole, without biases introduced by manual methods of obtaining the reaction coordinate by peak intensity evaluation from individual patterns typical of the traditional approach. The procedure is described in its theoretical framework and applied to the formation of a molecular complex, monitored by in situ X-ray powder diffraction and Raman measurements.