Cage-like microstructures via sequential Ugi reactions in aqueous emulsions.

Cage-like microstructures were obtained in two steps by sequential Ugi reactions. At the first stage, submicron colloidal particles based on carboxymethylcellulose and chitosan with a domain structure were obtained in an aqueous suspension. In the second stage, the Ugi reaction was carried out on the surface of the Pickering emulsions with toluene. Removal of toluene and redissolution in water resulted in colloidosomes with large holes on the surface. Varying the cross-link density during the Ugi reaction made it possible to obtain structures with different hole sizes.

Effective pickering emulsifiers based on submicron carboxymethyl cellulose/chitosan polymer particles.

In this study, cross-linked carboxymethyl cellulose/chitosan submicron particles were employed to facilitate the stabilization of Pickering emulsion. The polymer particles were prepared using the polyelectrolyte self-assembly method in conjunction with isocyanide based multicomponent reactions and the characteristics were obtained using: nuclear magnetic resonance, Fourier-transform infrared spectroscopy and dynamic light scattering. Atomic force microscopy revealed the heterogeneous structure of the resulting submicron particles with domains of 20-30 nm in size. The average diameter was found to be in the range of 229-378 nm and they were found to be suitable for the fabrication of oil/water Pickering emulsion when proceeded via the homogenization method followed by sonication. The results obtained revealed that carboxymethyl cellulose/chitosan particles significantly stabilized the droplets at the oil/water interface. Even at low particle concentrations of 0.3 g/L (which is close to that of low molecular weight surfactants) stable Pickering emulsions have been obtained. Additionally, the resulting emulsions showed a high level of stability with regard to changes in pH, temperature and ionic strength. The natural alkaloid piperine was used as a model compound to load the resulting particles, which possessed encapsulation efficiency of 90.6±0.4%. Furthermore, the in vitro release profile of piperine from the Pickering emulsion revealed a much-controlled release in both acidic and neutral media as compared to the unformulated piperine. Additional findings in this work revealed important information on the application of carboxymethyl cellulose/chitosan submicron particles as Pickering stabilizers for creation of new delivery systems.

Fucoidan coated liposomes loaded with novel antituberculosis agent: preparation, evaluation, and cytotoxicity study.

In this article, we described a novel antituberculosis imidazotetrazine derivative designed in fucoidan-coated liposomes to reduce its cytotoxicity and investigate its mucoadhesive properties. Firstly, fucoidan extracted from Ascophyllum nodosum was used for additional stabilization of liposomal suspensions and to give it mucoadhesive properties. PEG-600 and/or Tween-80 were used to increase the shelf life of liposomal suspension. The ratio of the fucoidan: lipids 1:2 was found to be the optimum that produces stable fucoidan-coated liposomes. The particle size of the optimum formulation was 336.3 ± 5.4, the PDI was 0.33, and the zeta potential was -39.6. This size and the practical spherical shape of the particles were confirmed by atomic force microscopy. In addition, the in vitro release profiles from uncoated and fucoidan-coated liposomes revealed significant and faster release compared to free antituberculosis agent. Using the MTT assay test, the fucoidan-coated liposomes exhibited fourteen times lower cytotoxicity (IC50 7.14 ± 0.91 µg/ml) than the free drug (IC50 0.49 ± 0.06). Moreover, the mucoadhesive capabilities of these liposomal formulations were also confirmed using snail mucin, which highlighting their potential use as an effective delivery system for antituberculosis therapy, with notable improvements in dissolution rate and reduced cytotoxicity.

Optimization, characterization, and cytotoxicity studies of novel anti-tubercular agent-loaded liposomal vesicles.

The treatment of tuberculosis is still a challenging process due to the widespread of pathogen strains resistant to antibacterial drugs, as well as the undesirable effects of anti-tuberculosis therapy. Hence, the development of safe and effective new anti-antitubercular agents, in addition to suitable nanocarrier systems, has become of utmost importance and necessity. Our research aims to develop liposomal vesicles that contain newly synthesized compounds with antimycobacterial action. The compound being studied is a derivative of imidazo-tetrazine named 3-(3,5-dimethylpyrazole-1-yl)-6-(isopropylthio) imidazo [1,2-b] [1,2,4,5] tetrazine compound. Several factors that affect liposomal characteristics were studied. The maximum encapsulation efficiency was 53.62 ± 0.09. The selected liposomal formulation T8* possessed a mean particle size of about 205.3 ± 3.94 nm with PDI 0.282, and zeta potential was + 36.37 ± 0.49 mv. The results of the in vitro release study indicated that the solubility of compound I was increased by its incorporation in liposomes. The free compound and liposomal preparation showed antimycobacterial activity against Mycobacterium tuberculosis H37Rv (ATCC 27294) at MIC value 0.94-1.88 µg/ml. We predict that the liposomes may be a good candidate for delivering new antitubercular drugs.

Relevance of Protein Intake for Weaning in the Mechanically Ventilated Critically Ill: Analysis of a Large International Database.

OBJECTIVES: The association between protein intake and the need for mechanical ventilation (MV) is controversial. We aimed to investigate the associations between protein intake and outcomes in ventilated critically ill patients. DESIGN: Analysis of a subset of a large international point prevalence survey of nutritional practice in ICUs. SETTING: A total of 785 international ICUs. PATIENTS: A total of 12,930 patients had been in the ICU for at least 96 hours and required MV by the fourth day after ICU admission at the latest. INTERVENTIONS: None. MEASUREMENTS AND MAIN RESULTS: We modeled associations between the adjusted hazard rate (aHR) of death in patients requiring MV and successful weaning (competing risks), and three categories of protein intake (low: < 0.8 g/kg/d, standard: 0.8-1.2 g/kg/d, high: > 1.2 g/kg/d). We compared five different hypothetical protein diets (an exclusively low protein intake, a standard protein intake given early (days 1-4) or late (days 5-11) after ICU admission, and an early or late high protein intake). There was no evidence that the level of protein intake was associated with time to weaning. However, compared with an exclusively low protein intake, a standard protein intake was associated with a lower hazard of death in MV: minimum aHR 0.60 (95% CI, 0.45-0.80). With an early high intake, there was a trend to a higher risk of death in patients requiring MV: maximum aHR 1.35 (95% CI, 0.99-1.85) compared with a standard diet. CONCLUSIONS: The duration of MV does not appear to depend on protein intake, whereas mortality in patients requiring MV may be improved by a standard protein intake. Adverse effects of a high protein intake cannot be excluded.

Application of the Ugi reaction for preparation of submicron capsules based on sugar beet pectin.

The Ugi four-component condensation in diluted liposomal suspensions was used to prepare pectin-based submicron capsules. A set of isocyanides and aldehydes was used to optimize the synthesis of capsule shells. Modified sugar beet pectin was selected as a natural polymer with pronounced surface activity to create a capsule shell. At first, liposomal composition was optimized in order to select suitable conditions for capsule formation. Then, the wide set of capsules constructed on modified sugar beet pectin scaffold has been synthesized. The choice was determined by level of substitution degree and possible chemical diversity of the modified surface. Detailed characterization of products has been performed for polysaccharide particles with liposomal core prepared with various processing parameters (concentration, cross-linking components, the density of linkage). The chemical structure, average size, polydispersity index, morphology, stability, and cytotoxicity of obtained particles have been investigated in dependence on the shell content. The obtained submicrometer cross-linked capsules (220-240 nm) with controlled colloidal properties showed high stability and low toxicity. Thus, the proposed carriers have a great potential as sustained drug delivery systems for different administration routes.

Using Soccer Games as an Instrument to Forecast the Spread of COVID-19 in Europe.

We provide strong empirical support for the contribution of soccer games held in Europe to the spread of the COVID-19 virus in March 2020. We analyze more than 1,000 games across 194 regions from 10 European countries. Daily cases of COVID-19 grow significantly faster in regions where at least one soccer game took place two weeks earlier, consistent with the existence of an incubation period. These results weaken as we include stadiums with smaller capacity. We discuss the relevance of these variables as instruments for the identification of the causal effect of COVID-19 on firms, the economy, and financial markets.

6-(4'-Aryl-1',2',3'-triazolyl)-spirostan-3,5-diols and 6-(4'-Aryl-1',2',3'-triazolyl)-7-hydroxyspirosta-1,4-dien-3-ones: Synthesis and analysis of their cytotoxicity.

In an endeavour to develop potent anti-tumor agents from diosgenin, a series of C-6 derived 1,2,3-triazolyl derivatives were designed and synthesized by employing Cu(I) catalyzed Huisgen 1,3-dipolar cycloaddition reaction of novel azides - (22R,25R)-6ß-azidospirostan-3ß,5α-diol and 6ß-azido-7α-hydroxyspirosta-1,4-dien-3-one with aryl(hetaryl)alkynes. All the derivatives were evaluated for cytotoxic activity by MTT assay against eight different human cancer cell lines: T-cellular leucosis (CEM-13), human monocytes (U-937), breast (MDA-MB-231, BT-474), prostate (DU-145) and glioblastoma (U-87MG, SNB-19, T98G). The results of this study suggested that 6-(4'-aryl-1',2',3'-triazolyl)spirostan-3,5-diols 2, 3, 4, 5 and 6 possessed a promising cytotoxic potential. The corresponding 6-substituted 7-hydroxy-1,4-spirostadien-3-ones shown less cytotoxity on the human cancer cells. Compounds 2, 3, 4, and 5 which demonstrated high grown inhibition against glioma cancer cells U-87 and T98G, and also on the human-derived N118669 primary glioblastoma cell line (with GI50 values in the range of 5-9 µM), were not affected the growth of SNB-19 cells. The data revealed that phenyl, 4-methoxyphenyl, 4-fluorophenyl, 3,4,5-trimethoxyphenyl or 2-pyridinyl substituent in the triazole moiety at the C-6 position significantly improved the anti-tumor activity. The mentioned position at the spirostan core may be favourable for the synthesis of potent anticancer leads from diosgenin.

Preparation of chitosan-coated liposomes as a novel carrier system for the antiviral drug Triazavirin.

Novel method for the coating of positively charged liposomes with modified chitosan was elaborated. Liposomes were prepared by stepwise extrusion through inorganic membranes (Anotop) of 0.2 and 0.1 µm pore sizes. Chitosan derivatives were synthesized via the Ugi multicomponent reaction. Several series of liposomal compositions were produced and their properties were compared in terms of particle size, polydispersity index (PDI), zeta potential and stability. The effect of various additives was investigated and the optimal composition of the lipid film was determined. The addition of the uncharged fatty esters allowed the diameter of the liposomes obtained by extrusion to be reduced to 145-150 nm with a PDI of 0.13-0.15. The prepared liposomes were loaded with the novel antiviral drug Triazavirin and used to determine the release profile. Triazavirin was included into liposome layer as a salt with biocompatible choline derivatives of limiting fatty acids. The appropriate lipid composition was used for the preparation of a larger quantity of liposomes coated by modified chitosan. It was shown that an appropriate combination of liposomes and polysaccharide layer potentially extended colloidal stability by up to 3 months and exhibited broad functional capabilities for surface modification.

Reaction of isocyanides with thiophenols and gem-diactivated olefins: a one-pot synthesis of substituted 2-aminopyrroles.

A novel multicomponent reaction of isocyanides with thiophenols and gem-diactivated olefins has been discovered. Depending on the choice of isocyanides, substituted 2-aminopyrroles or thioimidates have been prepared. The obtained scaffolds bearing four points of diversity can directly be used in combinatorial syntheses.

A novel three-component reaction designed by the combinatorial method: heteroarenes, isothiocyanates and isocyanides.

The novel three-component reaction of isoquinoline with isothiocyanates and isocyanides leads to a variety of new imidazoisoquinolines. The zwitterionic ground state of these new ring systems is established by means of NMR and X-ray analysis. Use of phthalazine instead of isoquinoline gives access to imidazole annulated phthalazines.

Ugi reaction in aqueous solutions: a simple protocol for libraries production.

A reaction between levulinic acid, isocyanides and primary amines has been examined in distilled water and in surfactants solutions. It is demonstrated that the reaction gives good results at the different concentrations including one well above the solubility limit. A simple and eco-friendly protocol for libraries production is described.