The Influence of Vitamin E and Omega-3 Fatty Acids on Reproductive Health Indices Among Male Workers Exposed to Electromagnetic Fields.

The present study aims to investigate the effects of using the supplementation of vitamin E and Omega 3 fatty acids on reproductive indices among workers in an automobile parts manufacturing plant. The effect of exposure to electromagnetic fields on certain sex hormones and sperm parameters will also be assessed. The participants were deployed into four groups as per the double-blind block randomization method. Semen parameters and sex hormones of the participants were analyzed before and after 3-month consumption of supplements. The level of workers' exposure to low-frequency magnetic and electrical fields was measured through the recommendation of National Institute for Occupational Safety and Health. Univariate analysis of variance indicated that exposure to electric fields had a statistically significant effect on sperm count, morphology, and motility. The simultaneous consumption of vitamin E + Omega 3 had a statistically significant effect on sperm morphology and motility.

Comparison of mice' sperm parameters exposed to some hazardous physical agents.

The present study was aimed to compare the effects of exposure to noise, vibration, lighting, and microwave on male mice' sperm parameters. The mice were randomly assigned to five groups of eight, which comprised of the unexposed group and exposure groups including the lighting (1000 lux), noise (100 dB(A)), vibration (acceleration of 1.2 m/s2) and microwave (power density of 5 watts). The exposure groups were subjected to the four agents for 8 hours a day, 5 days a week during a 2-week period. Semen analysis were done according to World Health Organization guidelines. The highest significant mean difference in sperm count (-1.35×106/mL) had being observed between the microwave group and the control one (P=0.001). The highest difference in immotile percent (25.88 %) had being observed between the noise group and the control one (P=0.001). The highest difference in normal morphology (-27.06 %) observed between the lighting exposure group and the control group (P=0.001). The four agents can cause changes in different sperm parameters, however for definite conclusion; more laboratory and field studies are required. In total, exposure to microwave has had the greatest effect on sperm count and exposure to light has had the greatest effect on normal morphology and non-progressive motility. Moreover, exposure to noise has had the greatest effect on progressive motility and immotile percent, respectively.

Relationship between occupational exposure to whole-body vibration and noise with sex hormone levels: An empirical assessment in an automobile parts manufacturing plant.

The present study investigated the relationship between occupational exposure to noise and whole-body vibration (WBV) with the levels of sex hormones in an automobile parts manufacturing plant. The level of workers' exposure (n = 162) to each of the mentioned stressors was measured through standard methods, and the time-weighted average of exposure was calculated for each person. In order to determine serum sex hormones (free testosterone, luteinizing hormone, and follicle-stimulating hormone), blood samples were taken from all participants after 8-10 h of fasting between 7 and 9 am and then the blood samples were analyzed by an enzyme-linked immunosorbent assay method. In general, regarding testosterone as the main male sex hormone, only 49% of the participants were in the normal range. In a total of three sections, the lowest mean testosterone levels were observed in the third exposure group (WBV > 1.93 m/s2; noise >92.69 dB) of the studied stressor; however, only the difference in testosterone levels between the three different groups of exposure to noise was statistically significant (p = 0.001). The relationship between demographic variables and levels of noise and WBV exposure with sex hormones was not linear and only the relationship between noise exposure and testosterone levels was statistically significant (R = -0.201, p = 0.013). According to the results of logistic regression, the WBV had the greatest effect on testosterone levels. However, according to the results of the correlation test, only the relationship between noise exposure and testosterone levels was statistically significant.

Assessment of sexual hormones in foundry workers exposed to heat stress and electromagnetic fields.

The presence of hazardous agents in workplaces has raised concerns regarding their possible impacts on male reproductive system. The present study investigated the individual and combined effects of exposure to heat stress and electromagnetic fields with low-frequency characteristics on the levels of sex hormones in two foundry sections (Aluminum and Cast Iron) of an automobile parts manufacturing plant. The level of workers' exposure (n = 110) to each of the mentioned stressors, was measured through standard methods and for each person and the time-weighted average (TWA) of exposure was calculated. The participants of each sections were classified into separate exposure groups based on the 33rd and 66th percentile of the level of to heat stress and electromagnetic fields exposure. In order to determine serum sex hormones, blood samples were taken from all participants between 7-9 am and then the blood samples were analyzed by ELISA method. In total of two sections, the lowest mean testosterone levels was observed in the third exposure group of the electromagnetic fields (magnetic field>1.40 µT; electric field >0.42 V/m), however, the mean difference in testosterone levels between the three different groups of exposure wasn't statistically significant (P > 0.05). According to the results of Logistic Regression, the electric field had the greatest effect on testosterone levels as the main male hormone. Drawing a definitive conclusion regarding the effects of each harmful physical hazards is difficult due to the existence of psychological stressors and other environmental stressors such as chemical pollution, ergonomic hazards and other physical stressors.

Evaluation of potential biomarkers of exposure to crystalline silica: A case study in an insulator manufacturer.

The purpose of this study was to examine the potential determinants of serum neopterin, malondialdehyde (MDA), and erythrocyte glutathione (GSH) as potential markers of oxidative stress, resulting in cellular immune response to inhaled silica particles. This descriptive analytical study was conducted on two groups of exposed workers ( n = 55) and unexposed office workers ( n = 38) of an insulator manufacturing plant. The sampling of airborne silica in the breathing zone of participants was done on the basis of the National Institute for Occupational Safety and Health Method 7601. The blood samples were analyzed by high performance liquid chromatography to determine the level of serum neopterin. A ZellBio GmbH assay kit was used for the quantitative assays of GSH and MDA on the basis of the colorimetric assay. The results of this study show that the measurements of serum neopterin, MDA, and GSH can be considered as potential biological markers of silica exposure for undertaking further comprehensive studies in this area.

Pulmonary Functions and Health-Related Quality of Life among Silica-Exposed Workers.

BACKGROUND: This study aimed to investigate the pulmonary functions of silica-exposed workers and their health-related quality of life in an insulator manufacturing industry. MATERIALS AND METHODS: In this cross-sectional study, participants selected from the manufacturing unit (n = 127) constituted the exposed group and those from the administrative department (n = 30) constituted the unexposed group. All subjects were evaluated using personal air sampling of crystalline silica, pulmonary function tests, and a quality of life questionnaire (36-item short form health survey [SF-36]). RESULTS: The mean (SD) concentrations of crystalline silica were 0.507 (0.23) mg/m3 and 0.0116 (0.008) mg/m3 for the exposed and unexposed groups, respectively. All the pulmonary function indices and all the physical and mental health domains of the workers were significantly lower than those of the administrative clerks (p < 0.05). The silica concentration did not significantly correlate with the quality of life components and all the pulmonary function indices (p > 0.05), except for forced vital capacity (FVC) and forced expiratory volume in one second (FEV1) (p < 0.05). CONCLUSION: In conclusion, the workers exposed to higher levels of crystalline silica had lower values of pulmonary function indices and lower health-related quality of life; however, further follow-up studies are needed to confirm these findings.

Survey of discomfort glare from the headlamps of cars widely used in Iran.

OBJECTIVE: On 2-lane roads, discomfort glare can cause annoyance, discomfort, inconvenience, stress, and fatigue to drivers, posing a risk of accidents. The aim of this study is to evaluate discomfort glare from the headlamps of cars widely used in Iran. METHODS: The discomfort glare of new vehicles including Pride Saba model GTX, Pride Model 131SL, Samand Soren, Peugeot 405, Megane, and Peugeot Pars was examined at distances of 5 to 100 m at a background luminance of 50 cd/m2 (late twilight/early dawn lighting) and 1 cd/m2 (nighttime) using Schmidt-Clausen and Bindels model and de Boer's subjective scale. RESULTS: According to the de Boer scale, at a background luminance of 50 cd/m2, the discomfort glare for all studied vehicles was between 1.98 and 4.05 in high-beam mode and between 3.5 and 5.4 in low-beam mode. At a background luminance of 1 cd/m2, discomfort glare was between 0.41 and 2.48 in high-beam mode and between 1.93 and 3.84 in low-beam mode. In high-beam mode, the average levels of discomfort glare of these vehicles gradually increased when the distance between cars was reduced by up to about 20 m. In low-beam mode, there was no discomfort glare up to a vehicle distance of 40 m. In addition, at an angle of 1.15°-5.73° between the line of sight and light of vehicles in high-beam mode, the level of discomfort glare was increased, but at an angle of 5.73°-22.9° the level of discomfort glare was reduced. In low-beam mode at an angle of 2.86°-22.9°, the level of discomfort glare was almost identical. The results show that in high-beam mode and with a 100-m distance between vehicles as well as in low-beam mode at intervals of less than 40 m between cars, discomfort glare is created. CONCLUSION: It can be concluded that by providing solutions such as installing road lighting system, an increase in luminance of roads, separating or widening road lanes, increasing the lateral distance between vehicles, and increasing the angle between lighted vehicles and drivers can noticeably reduce discomfort glare.

The Effect of Occupational Noise Exposure on Blood and Biochemical Parameters: A Case Study of an Insulator Manufacturer in Iran.

INTRODUCTION: Occupational noise is among the most critical occupational hazards, which, in addition to hearing loss, can cause other adverse consequences on an individual's physical and mental health. Long-term exposure to noise can affect blood and biochemical parameters and subsequently lead to increased risk of cardiovascular disease. This study investigated the effect of occupational exposure to noise on blood and biochemical parameters of workers in an insulator manufacturing plant. METHODS: This case-control study was conducted on workers in the production section (49 people as a case group) and the administrative staff (10 people as a control group) in one insulator manufacturing plant from 2010 to 2014. To assess individual exposure of workers to noise, the noise dosimeter model TES-1355 was used. Noise dosimetry testing was done based on the exposure pattern of workers to noise in compliance with the Iranian national standard (the criterion level of 85 dBA and the exchange rate of Q = 3 dBA). Blood parameters such as blood glucose, cholesterol, red blood cells (RBC), white blood cells (WBC), hemoglobin (Hb), and hematocrit (Hct) were studied in production workers (case) and administrative staff (control) over five consecutive years. The data were analyzed by software (SPSS-22) using the t-test, Mann-Whitney test, Fisher exact test, and Greenhouse-Geisser test. RESULTS: No significant difference was found among the demographic data of the two groups (p > 0.05). Average of glucose and cholesterol levels in the two groups was statistically significant (p < 0.05) and blood glucose levels in the case group significantly reduced over time and cholesterol increased (p < 0.001). Mean difference of RBC number, WBC number, and serum levels of Hb and Hct was statistically significant between the two groups (p < 0.05). In addition, these hematological parameters increased among workers during these years. CONCLUSION: Occupational exposure to noise may have a significant effect on an individual's blood parameters, which will cause harmful effects on worker health. Therefore, industrialists must take preventive measures in the field of noise control.