Synthesis and Characterization of Novel Ternary-Hybrid Nanoparticles as Thermal Additives.

The performance of water as a heat transfer medium in numerous applications is limited by its effective thermal conductivity. To improve the thermal conductivity of water, herein, we report the development and thermophysical characterization of novel metal-metal-oxide-carbon-based ternary-hybrid nanoparticles (THNp) GO-TiO2-Ag and rGO-TiO2-Ag. The results indicate that the graphene oxide- and reduced graphene oxide-based ternary-hybrid nanoparticles dispersed in water enhance the base fluid (H2O) thermal conductivity by 66% and 83%, respectively, even at very low concentrations. Mechanisms contributing to this significant enhancement are discussed. The experimental thermal conductivity is plotted against the existing empirical hybrid thermal conductivity correlations. We found that those correlations are not suitable for the metal-metal-oxide-carbon combinations, calling for new thermal conductivity models. Furthermore, the rheological measurements of the nanofluids display non-Newtonian behavior, and the viscosity reduces with the increase in temperature. Such behavior is possibly due to the non-uniform shapes of the ternary-hybrid nanoparticles.

A Systematic Review of Piezoelectric Materials and Energy Harvesters for Industrial Applications.

In the last three decades, smart materials have become popular. The piezoelectric materials have shown key characteristics for engineering applications, such as in sensors and actuators for industrial use. Because of their excellent mechanical-to-electrical and vice versa energy conversion properties, piezoelectric materials with high piezoelectric charge and voltage coefficient have been tested in renewable energy applications. The fundamental component of the energy harvester is the piezoelectric material, which, when subjected to mechanical vibrations or applied stress, induces the displaced ions in the material and results in a net electric charge due to the dipole moment of the unit cell. This phenomenon builds an electric potential across the material. In this review article, a detailed study focused on the piezoelectric energy harvesters (PEH's) is reported. In addition, the fundamental idea about piezoelectric materials, along with their modeling for various applications, are detailed systematically. Then a summary of previous studies based on PEH's other applications is listed, considering the technical aspects and methodologies. A discussion has been provided as a critical review of current challenges in this field. As a result, this review can provide a guideline for the scholars who want to use PEH's for their research.

Investigation on Rheological Properties of Water-Based Novel Ternary Hybrid Nanofluids Using Experimental and Taguchi Method.

This study presents the rheological behavior of water-based GO-TiO2-Ag and rGO-TiO2-Ag ternary-hybrid nanofluids. The impact of nanoparticles' volumetric concentration and temperature on the rheological properties were studied. All experiments were performed under temperatures ranging from 25 to 50 °C in the solid volume concentration range of 0.5-0.00005%. The data optimization technique was adopted using the Taguchi method. The types of nanomaterials, concentration, temperature, and shear rate were chosen to optimize the viscosity and shear stress. The effect of shear stress, angular sweep, frequency sweep, and damping factor ratio is plotted. The experimental results demonstrated that the rheological properties of the ternary hybrid nanofluid depend on the ternary hybrid nanofluid's temperature. The viscosity of ternary hybrid nanofluids (THNf) change by 40% for GO-TiO2-Ag and 33% for rGO-TiO2-Ag when temperature and shear rates are increased. All the ternary hybrid nanofluids demonstrated non-Newtonian behavior at lower concentrations and higher shear stress, suggesting a potential influence of nanoparticle aggregation on the viscosity. The dynamic viscosity of ternary hybrid nanofluid increased with enhancing solid particles' volume concentration and temperature.