RESUMO
Enhancing the initial stages of plant growth by using polymeric gels for seed priming presents a significant challenge. This study aimed to investigate a microgel derived from polyetheramine-poly(propylene oxide) (PPO) and a bisepoxide (referred to as micro-PPO) as a promising alternative to optimize the seed germination process. The micro-PPO integrated with an iron micronutrient showed a positive impact on seed germination compared with control (Fe solutions) in which the root length yield improved up to 39%. Therefore, the element map by synchrotron-based X-ray fluorescence shows that the Fe intensities in the seed primers with the micro-PPO-Fe gel are about 3-fold higher than those in the control group, leading to a gradual distribution of Fe species through most internal embryo tissues. The use of micro-PPO for seed priming underscores their potential for industrial applications due to the nontoxicity results in zebrafish assays and environmentally friendly synthesis of the water-dispersible monomers employed.
Assuntos
Aminas , Cucumis sativus , Germinação , Ferro , Microgéis , Sementes , Germinação/efeitos dos fármacos , Sementes/química , Sementes/metabolismo , Sementes/crescimento & desenvolvimento , Sementes/efeitos dos fármacos , Cucumis sativus/metabolismo , Cucumis sativus/crescimento & desenvolvimento , Cucumis sativus/química , Ferro/metabolismo , Ferro/química , Aminas/química , Aminas/metabolismo , Microgéis/química , Compostos de Epóxi/química , Compostos de Epóxi/metabolismo , Peixe-Zebra/metabolismo , AnimaisRESUMO
Schistosomiasis mansoni is an infectious parasitic disease caused by worms of the genus Schistosoma, and praziquantel (PZQ) is the medication available for the treatment of schistosomiasis. However, the existence of resistant strains reinforces the need to develop new schistosomicidal drugs safely and effectively. Thus, the (±)-licarin A neolignan incorporated into poly-Æ-caprolactone (PCL) nanoparticles and not incorporated were evaluated for their in vivo schistosomicidal activity. The (±)-licarin A -loaded poly(ε-caprolactone) nanoparticles and the pure (±)-licarin A showed a reduction in the number of worm eggs present in spleens of mice infected with Schistosoma mansoni. In addition, the (±)-licarin A incorporated in the concentration of 20 mg/kg and 200 mg/kg reduced the number of worms, presenting percentages of 56.3% and 41.7%, respectively.
Assuntos
Nanopartículas , Esquistossomose mansoni , Esquistossomicidas , Animais , Caproatos , Lactonas , Lignanas , Camundongos , Poliésteres , Schistosoma mansoni , Esquistossomose mansoni/tratamento farmacológico , Esquistossomose mansoni/parasitologia , Esquistossomicidas/farmacologia , Esquistossomicidas/uso terapêuticoRESUMO
Lignan dinitrohinokinin displays important biological activities, which led to the preparation of its poly-ε-caprolactone nanoparticles. Kinetics analysis revealed initially slow drug release followed by a prolonged, moderate release 6 h later due to DNHK diffusion through the polymeric matrix. Molecular dynamics simulations show that DNHK molecules that interact stronger with other DNHK molecules near the PCL/DNHK surface are more difficult to dissociate from the nanoparticle. The smaller diameter nanocapsules with negative surface charge conferred good colloidal stability. The formulations showed a size distribution with monodisperse systems formation. In vivo evaluation of schistosomicidal activity against Schistosoma mansoni showed that DNHK, when incorporated into nanoparticles, caused egg number reduction of 4.2% and 28.1% at 40 mg/kg and 94.2% and 84.4% at 400 mg/kg in the liver and the spleen, respectively. The PCL nanoparticles were stable in aqueous dispersion and could be optimized to be used as a promising lignan release agent.
Assuntos
Lignanas , Nanopartículas , Esquistossomicidas , Portadores de Fármacos , Lignanas/farmacologia , PoliésteresRESUMO
This paper presents the influence of the presence of a modified organoclay, Cloisite® 20A (MMTA) on the structural and drug release properties of ureasil organic-inorganic hybrid. Sol-gel process was used to prepare the hybrid nanocomposites containing sodium diclofenac (DCF) at 5% wt. The effect of the amount of MMTA incorporated into the ureasil hybrid matrix was evaluated and characterized in depth by different techniques such as X-ray diffraction (XRD), small angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), and swelling properties. The influence of MMTA on ureasil nanocomposites release profile was evaluated by in situ UV-vis. The diffraction patterns of the UPEO-MMTA nanocomposites showed a synergistic contribution effect that led to an intensity increase and narrowed the diffraction peaks, evidencing a crystallite PEO growth as a function of the modified nanoclay content. The interactions between polyether chains and the hydrogenated tallow of MMTA led to an easy intercalation process, as observed in UPEO-MMTA nanocomposites containing low (1% wt) or high (20% wt) nanoclay content. The waterway (channels) created in UPEO-MMTA nanocomposites contributed to a free volume increase in the swollen network compared to UPEO without MMTA. The hypothesis of the channels created after intercalation of the PEO phase in the interlayer of MMTA containing organoammonium ions corroborates with the XRD results, swelling studies by SAXS, and release assays. Furthermore, when these clay particles were dispersed in the polymeric matrix by an intercalation process, water uptake improvement was observed, with an increased amount of DCF release. The design of ureasil-MMTA nanocomposites containing modified nanoclay endows them with tunable properties; for example, swelling degree followed by amount of controlled drug release, opening the way for more versatile biomedical applications.
RESUMO
This work aimed to synthesize poly (D, L-lactic-co-glycolic acid) (PLGA) microparticles containing hinokinin (HNK) and to evaluate their cytotoxic activity against tumoral SiHa cells and non-tumoral HaCaT cells. Hinokinin was incorporated into PLGA (PLGA-HNK) with an encapsulation efficiency of 84.18 ± 2.32%. PLGA and PLGA-HNK were characterized by SEM microscopy and showed spherical morphology with an average size of â¼3.33. Encapsulation efficiency was determined by a calibration curve using UV-vis spectroscopy. PLGA-HNK more active inhibiting proliferation of SiHa cells (IC50 = 14.68 µM) than free HNK (IC50 = 225.5 µM). In relation to HaCaT cells, PLGA-HNK showed no significant difference compared to the negative control. These results led to an increase in HNK bioavailability and thereby, biological activity. In silico prediction analysis suggests that HNK is cytotoxic against SiHa cells with E6 and MDM2 inhibition as possible main mechanism of action.
Assuntos
Antineoplásicos , Nanopartículas , 4-Butirolactona/análogos & derivados , Antineoplásicos/química , Antineoplásicos/farmacologia , Benzodioxóis , Ácido Láctico/química , Lignanas , Nanopartículas/química , Tamanho da Partícula , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico e Ácido PoliglicólicoRESUMO
Here, we demonstrate a facile and scalable preparation via sol-gel chemistry of hybrid polyurea gels containing various amounts of a phosphorescent inorganic octahedral molybdenum cluster-based ternary salt, namely Cs2Mo6Br14. The influence of the Cs2Mo6Br14 content (1-10 wt%) on the polyurea matrix and its physical properties are studied in depth by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and X-ray fluorescence microanalysis (µ-XRF). Regardless of the amount of cluster loaded into the polyurea, the integrity of these species was preserved and their dispersion is homogeneous as shown by µ-XRF mapping. Spectroscopic-structural analyses reveal a significant increase of the chain mobility (glass transition temperature Tg) from -65 °C to -55 °C after the incorporation of Cs2Mo6Br14 (DSC analyses). The FTIR studies show that the homogeneity of the dispersion is ensured by supramolecular interactions between the ether-type oxygen atoms of the PEO chains and the cluster compound. Photoluminescence studies show that the metal cluster emission properties are well retained within the host matrix whatever the loaded content. Such a combination of materials demonstrates the feasibility to fabricate a rubber NIR-emitting device. Moreover, the loaded polyurea is also able to produce reactive oxygen species (ROS) upon irradiation in the UV-A region, opening new perspectives as versatile membranes in the field of photodynamic therapy.
RESUMO
In this study, the trypomastigotes of a Y strain of Trypanosoma cruzi were inoculated intraperitoneally into male BALB/c mice weighing approximately 25â g each, which were divided into groups for evaluation of the trypanocidal activity. For the treatment of experimental groups, encapsulated and unencapsulated (-)-cubebin, Benznidazole, and two groups as negative controls were used. The encapsulated (-)-cubebin showed a 68.1 % encapsulation efficiency. The parasitemia peak of substances remained around the 9th day after the observed reduction in the number of circulating trypomastigotes. The encapsulated (-)-cubebin and (-)-cubebin unloaded showed a decrease of 61.3 % and 58.5 % in the number of parasites as compared to the negative control, respectively. Moreover, animals treated with encapsulated (-)-cubebin had a higher survival time as compared to the other groups. In conclusion, the results obtained were more promising for encapsulated (-)-cubebin as compared to unloaded particles.
Assuntos
Lignanas/farmacologia , Microesferas , Tripanossomicidas/farmacologia , Trypanosoma cruzi/efeitos dos fármacos , Animais , Cápsulas , Injeções Intraperitoneais , Lignanas/administração & dosagem , Lignanas/química , Masculino , Camundongos , Camundongos Endogâmicos BALB C , Simulação de Acoplamento Molecular , Testes de Sensibilidade Parasitária , Tripanossomicidas/administração & dosagem , Tripanossomicidas/químicaRESUMO
There continues to be a need to develop controlled-release systems loaded with multiple drugs with distinct pharmacological activities, such as anti-inflammatory and anticancer effects, which are able to provide the desired release of each drug, as a function of time. To this end, an elegant strategy was developed for the incorporation, in a one-step process, of the anti-inflammatory drug naproxen (NAP) and the anticancer drug 5-fluorouracil (5FU) into a ureasil organic-inorganic hybrid matrix. A ureasil-poly(oxyalkylene) (UPEO) matrix was prepared using a sol-gel route to obtain a versatile dual-drug delivery system. Small-angle X-ray scattering (SAXS) measurements and Fourier transform infrared spectroscopy (FTIR) demonstrated that the UPEO network is preserved upon loading with the two drugs NAP and 5FU. There was excellent agreement between the macroscopic swelling behavior (water uptake) and surface wettability (determined using contact angle measurements), with this behavior being closely correlated with the release profiles and playing an important role in the sustained delivery of both drugs from the hybrid matrix. The amounts of both drugs released simultaneously could be finely controlled by adjusting the pH of the aqueous medium, with the release presenting stimulus-responsive behavior. In an aqueous PBS medium, the dual-UPEO-release system presented excellent potential as a vehicle for the release of the water-soluble 5FU and water-insoluble NAP drugs, at identical rates, using a single carrier. This novel and adjustable dual-drug delivery UPEO system is a promising hybrid material carrier with the ability to simultaneously incorporate a wide range of therapeutic agents for the treatment of various diseases, including cancers.
RESUMO
In this work, we report the effects of incorporation of variable amounts (1-20 wt %) of sodium montmorillonite (MMT) into a siloxane-poly(ethylene oxide) hybrid hydrogel prepared by the sol-gel route. The aim was to control the nanostructural features of the nanocomposite, improve the release profile of the sodium diclofenac (SDCF) drug, and optimize the swelling behavior of the hydrophilic matrix. The nanoscopic characteristics of the siloxane-cross-linked poly(ethylene oxide) network, the semicrystallinity of the hybrid, and the intercalated or exfoliated structure of the clay were investigated by X-ray diffraction, small-angle X-ray scattering, and differential scanning calorimetry. The correlation between the nanoscopic features of nanocomposites containing different amounts of MMT and the swelling behavior revealed the key role of exfoliated silicate in controlling the water uptake by means of a flow barrier effect. The release of the drug from the nanocomposite displayed a stepped pattern kinetically controlled by the diffusion of SDCF molecules through the mass transport barrier created by the exfoliated silicate. The sustained SDCF release provided by the hybrid hydrogel nanocomposite could be useful for the prolonged treatment of painful conditions, such as arthritis, sprains and strains, gout, migraine, and pain after surgical procedures.
RESUMO
CONTEXT: (-)-6,6'-Dinitrohinokinin (DNHK) display remarkable antiparasitic activity and was, therefore, incorporated into a nanoparticle formulation. OBJECTIVE: Incorporation of DNHK in poly lactic-co-glycolic acid (PLGA) nanoparticles aiming to improve its biological activities. MATERIALS AND METHODS: Synthesis, characterization and incorporation of DNHK into glycolic acid (PLGA) nanoparticles by nanoprecipitation method. The nanoparticles were characterized by ultraviolet-visible spectroscopy, X-ray diffraction, field emission electron microscopic scanning mansoni (FESEM), and dynamic light scattering (DLS). For the in vitro test with Schistosoma mansoni, the DNHK-loaded PLGA was diluted into the medium, and added at concentrations 10-200 µM to the culture medium containing one adult worm pair. The parasites were kept for 120 h and monitored every 24 h to evaluate their general condition, including: pairing, alterations in motor activity and mortality. RESULTS: The loaded PLGA nanoparticles gave an encapsulation efficiency of 42.2% and showed spherical characteristics in monodisperse polymeric matrix. The adult worm pairs were separated after 120 h of incubation for concentrations higher than 50 µM of DNHK-loaded PLGA. The groups incubated with 150 and 200 µM of DNHK-loaded PLGA for 24 and 120 h killed 100% of adult worms, afforded LC50 values of 137.0 ± 2.12 µM and 79.01 ± 1.90 µM, respectively, which was similar to the effect displayed by 10 µM of praziquantel. DISCUSSION AND CONCLUSIONS: The incorporation of DNHK-loaded showed schistosomicidal activity and allowed its sustained release. The loaded PLGA system can be administered intravenously, as well as it may be internalized by endocytosis by the target organisms.
Assuntos
4-Butirolactona/análogos & derivados , Benzodioxóis/administração & dosagem , Ácido Láctico/administração & dosagem , Lignanas/administração & dosagem , Nanopartículas/administração & dosagem , Ácido Poliglicólico/administração & dosagem , Schistosoma mansoni/efeitos dos fármacos , Esquistossomicidas/administração & dosagem , 4-Butirolactona/administração & dosagem , 4-Butirolactona/química , Animais , Benzodioxóis/química , Portadores de Fármacos/administração & dosagem , Portadores de Fármacos/química , Feminino , Ácido Láctico/química , Lignanas/química , Masculino , Camundongos , Camundongos Endogâmicos BALB C , Nanopartículas/química , Tamanho da Partícula , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Schistosoma mansoni/fisiologia , Esquistossomicidas/química , Caramujos , Difração de Raios XRESUMO
This work reports the use of a cross-linked ureasil-PEO hybrid matrix (designated PEO800) as an efficient adsorbent to retain the emerging contaminant bisphenol A (BPA) from an aqueous medium. The in-deep experimental and theoretical results provide information about the interactions between PEO800 and BPA. The in situ UV-vis spectroscopy data and the pseudo-first order, pseudo-second order, Elovich, and Morris-Webber intraparticle diffusion models allowed us to propose a three-step mechanism for the adsorption of BPA onto PEO800. The results indicate that the pseudo-first-order kinetic model effectively describes the adsorption of BPA onto PEO800. Differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy confirmed the interaction of PEO800 with BPA, showing an alteration in the chemical environment of the polymer ether oxygen atoms present in the hybrid matrix. The molecular dynamic simulation provides further evidence that the BPA molecules interact preferentially with PEO. The amount of desorbed BPA depended on the pH and solvent used in the assays. This work provides new opportunities for using the hydrophilic ureasil-PEO matrix which has demonstrated its abilities in being a fast and easy alternative to successfully removing organic contaminants from aqueous mediums and therefore having potential applications in water remediation. Graphical abstract.
Assuntos
Compostos Benzidrílicos/análise , Membranas Artificiais , Modelos Teóricos , Compostos de Organossilício/química , Fenóis/análise , Polietilenoglicóis/química , Ureia/química , Poluentes Químicos da Água/análise , Adsorção , Compostos Benzidrílicos/química , Cinética , Simulação de Dinâmica Molecular , Fenóis/química , Poluentes Químicos da Água/químicaRESUMO
Herein, we present a cross-linked ureasil-polyether-siloxane hybrid (labeled PEO500) that can function as a stimuli-sensitive material; it swells or shrinks in response to changes in the environmental conditions and it can also, effectively and selectively, remove dyes from water solution. We also developed a methodology to separate a mixture of cationic and anionic dyes present in water. Addition of PEO500 to an aqueous solution of the anionic orange II (OII) or the ponceau S (PS) dye rendered the solution colorless, but an aqueous solution of cationic methylene blue (MB) remained unchanged after 2 h of contact with the insoluble matrix. In situ small-angle X-ray scattering (SAXS) showed that the distance of siloxane nanodomains are strongly affected by the swelling or shriking. By in situ UV-vis adsorption experiments, we found that the kinetics of OII and PS removal followed a pseudo-first-order rate equation. We accomplished B3LYP calculations, to establish which sites on the matrix interacted with the dyes and to investigate the nature of the matrix-dye chemical bonds. On the basis of the experimental and theoretical investigations, we proposed some mechanisms to explain how PEO500 adsorbs anionic dyes efficiently. This "smart" matrix is potentially applicable as an efficient, fast, selective, and convenient device in water treatment and stimuli-sensitive response materials.
RESUMO
Efficient incorporation of (PtCl3EtOH)(-) anion derived from CisPt moiety into ureasil-PPO (poly(propylene oxide)) network was achieved from one-pot sol-gel synthesis carried out in the presence of water, HCl, and ethanol. Reactant proportion was adequately chosen to lead the sol-gel formation of siloxane nodes at the end of short PPO chains, to prevent the CisPt hydrolysis, and to induce platinum ligand exchange. The efficient dissolution of Pt species and the formation of a homogeneous liquid-like solution on the transparent and elastomeric ureasil-PPO hybrid were evidenced by differential scanning calorimetry and small-angle X-ray scattering. The CisPt ligand exchange and the formation of a Zeise-type salt Y(+)(PtCl3R)(-) were demonstrated by Raman spectroscopy and Pt L3-edge EXAFS analysis. In light of these results and in agreement with the proportion of reactants introduced in the media for synthesis and those self-produced by hydrolysis and condensation processes, we proposed for R the ethanol moiety and for Y the ammonium cation. The Raman spectroscopy studies indicated also that the ammonium cations are coordinated by the ether-type oxygen atoms of the PPO chains backbone, whereas the amine groups of the urea linkage participate in the (PtCl3EtOH)(-) anion coordination. In situ Raman monitoring of Pt species decomplexation induced by immersion of hybrid matrix in water highlighted the specific participation of Pt ligands in interaction with the urea group and of NH4(+) cations coordinated by ether-type oxygen atoms in the formation of supramolecular interactions between the PPO chains. The electrospray mass spectrometry analysis of the Pt species released in water from the ureasil-PPO hybrid evidenced that the structure of the complex, NH4 (PtCl3 EtOH), incorporated in the matrix is totally preserved after delivery. Due to both well-known antitumoral and catalytic activities of Pt species, the results reported herein are of prime importance for further applications as drug delivery systems with optimized release pattern or as potential materials for new conceptual development of in situ catalyst delivery in homogeneous catalysis.
Assuntos
Cisplatino/química , Compostos Organoplatínicos/química , Compostos Organoplatínicos/síntese química , Platina/química , Polímeros/química , Propilenoglicóis/química , Ureia/química , Etanol/química , Ácido Clorídrico/química , Ligantes , Ureia/análogos & derivados , Água/químicaRESUMO
The ability of assembling inorganic, organic, and even bioactive components in a single material unfolds an exciting direction in the development of novel multifunctional hybrid materials. Recently, we have observed that the hydrophilic/hydrophobic character of the organic polymeric moieties determines the swelling/diffusion control of the drug release. In this work, the antitumor cisplatin (CisPt) molecules incorporated into the ureasil-PEO (poly(ethylene oxide)) hybrid material was used as a probe for the in situ and simultaneous UV-vis and Raman spectroscopies monitoring of the kinetics of both the water uptake as well as the CisPt release by the hybrid matrix. Drug molecules were incorporated during the hydrolysis and polycondensation steps. The monolithic xerogel were analyzed by X-ray absorption spectroscopy and differential scanning calorimetry, while the drug release properties were monitored by Raman as well as UV-vis spectroscopies. The results show that the molecular structure of the CisPt is preserved in the one pot sol-gel route used in synthesizing the CisPt-loaded PEO1900 hybrid. The in situ monitoring of water uptake clearly points out the key contribution of the osmotic flow on the stepped profile of the CisPt delivered from the PEO1900 hybrid matrix.