RESUMO
This study aimed to identify a new skin penetrating peptide (SPP) able to enhance unfractionated heparin (UFH) permeation through human epidermis by screening a phage display peptide library. The effects of the synthesized heptapeptide (DRTTLTN) on human stratum corneum organization were investigated by ATR-FTIR spectroscopy and molecular dynamics simulation. The DRTTLTN penetration within the human epidermis caused both a fluidization of the stratum corneum lipids and the extension of keratins due to the increase of the contribution of α-helices. The coadministration of DRTTLTN with UFH resulted ineffective in increasing skin penetration due to UFH affinity for keratins. The conjugation of DRTTLTN to UFH by N-(3-(dimethylamino)propyl)-N'-ethylcarbodiimide hydrochloride and sodium N-hydroxysulfosuccinimide led to an increase of the flux of 24-36-fold with respect to raw UFH, depending on the adopted synthetic procedure. The new compounds showed a decrease of the antifactor Xa activity of about 4-5 times. DRTTLTN also permitted to increase the fluxes of small model molecules. In conclusion, these data support the use of SPP to enhance the skin penetration of poorly absorbed compounds even in the case of macromolecules as polysaccharides.
Assuntos
Epiderme/metabolismo , Heparina/metabolismo , Peptídeos/metabolismo , Pele/metabolismo , Adulto , Feminino , Heparina/química , Humanos , Queratinas/metabolismo , Lipídeos/fisiologia , Pessoa de Meia-Idade , Biblioteca de Peptídeos , Permeabilidade/efeitos dos fármacos , Absorção Cutânea/efeitos dos fármacos , Espectroscopia de Infravermelho com Transformada de Fourier/métodosRESUMO
INTRODUCTION: Methyl methacrylate copolymers (Eudragit®) have been exploited to develop transdermal patches, medicated plasters (hereinafter patches) and, more recently, film-forming sprays, microsponges and nanoparticles intended to be applied on the skin. AREAS COVERED: The article reviews the information regarding the application of Eudragits in the design and development of these dosage forms focusing on the impact of formulative variables on the skin drug penetration and the patch adhesive properties. EXPERT OPINION: Eudragits combined with a large amount of plasticizers are used to design the pressure-sensitive adhesives, specialized materials used in the patch development. They have to assure the drug skin penetration and the contact with the skin. Most of the studies mainly deal with the former aspect. The authors used a Eudragit type opportunely plasticized to merely investigate the in vitro or in vivo skin permeability of a loaded drug. However, the summa of these data evidenced that a strict connection between the matrix hydrophilicity and drug penetration probably exists. The criticisms of adhesion are addressed in a limited number of papers reporting data on technological properties, namely tack, shear adhesion and peel adhesion, while the structural data of the Eudragit adhesives, rheology and surface free energy are not described, excepting the case of Eudragit E. Among other applications, micro- and nanosystems exploiting the ionizable nature of some Eudragits can offer novel opportunities to develop pH-sensitive drug delivery systems suitable for triggering its release onto the skin.
Assuntos
Sistemas de Liberação de Medicamentos , Preparações Farmacêuticas/administração & dosagem , Ácidos Polimetacrílicos/administração & dosagem , Absorção Cutânea/efeitos dos fármacos , Adesivo Transdérmico , Administração Cutânea , Aerossóis , Animais , Humanos , Pele/metabolismo , Adesivos TeciduaisRESUMO
OBJECTIVE: To evaluate the feasibility of a transdermal patch containing propranolol (PR). METHOD: Skin penetration enhancers (SPEs) able to improve the skin permeability of PR were selected and a quality by design approach was applied to the development of the patch by a 2(4) full factorial design. The permeation profile of PR from the formulations was assessed in in vitro permeation studies performed by using Franz diffusion cells and human epidermis as membrane. Finally, skin irritation was evaluated by the Draize test. RESULTS: N-methyl pyrrolidone (NMP) resulted as the best SPE: in addition, the critical factors influencing the PR diffusion through the human epidermis when loaded in the patch resulted in the matrix thickness (X1, p = 0.0957) and PR content (X3, p = 0.0004) which improved the flux; conversely, NMP lacked its enhancement effect when loaded in the patch and the increase in its concentration (X4, p = 0.006) affected the drug permeation through human epidermis. The flux of optimal formulation was 12.7 µg/cm(2)/h. On the basis of the steady-state concentration and clearance of PR, the estimated patch surface was 100-120 cm(2), since the activity of PR is related to its Senantiomer and no in vivo bioconversion occurs. CONCLUSION: A patch containing (S)-PR was prepared and the (S)-PR flux (13.3 µg/cm(2)/h) permitted to confirm the suitability of a transdermal administration of PR. In particular, the use of a 50 µm thick methacrylic matrix containing 8% (S)-PR and 15% NMP can allow to develop a patch non-irritating to the skin, in order to ensure a constant permeation flux of PR over 48 h.
Assuntos
Antagonistas Adrenérgicos beta/farmacocinética , Sistemas de Liberação de Medicamentos , Propranolol/farmacocinética , Absorção Cutânea , Administração Cutânea , Antagonistas Adrenérgicos beta/administração & dosagem , Antagonistas Adrenérgicos beta/toxicidade , Animais , Química Farmacêutica , Preparações de Ação Retardada , Epiderme/metabolismo , Excipientes/química , Estudos de Viabilidade , Humanos , Masculino , Permeabilidade , Propranolol/administração & dosagem , Propranolol/toxicidade , Ratos , Pele/metabolismo , Testes de Irritação da Pele , Fatores de Tempo , Adesivo TransdérmicoRESUMO
The current work aimed to propose a system of scoring to rationalize and support the selection of the optimal diameter and length of needles. Four formulations at different viscosity and needles ranging from 21 to 26 G and length ranging from 16 to 40 mm were used. Plunger-stopper breakloose force, maximum force (F(max)), and dynamic glide force were measured by a texture analyzer at the crosshead speed of 1 mm/s. Testing was carried out into air or human subcutaneous tissue. The manual injectability of the highest viscosity product was assessed by ten evaluators. The comparison of the panel test score and the quantitative measurements of the forces permitted to score a given needle-syringe-formulation system keeping also in consideration the pressure created in the subcutaneous space and muscles at the injection site. In particular, the following relationship was drawn: at the F(max) up to 250 mPa, the injection was practically impossible; at F(max) ranging from 160 to 250 mPa, the injection was very difficult; at F(max) in the 125-160 mPa range, the injection was feasible, though with some difficulty; when the values of F(max) were lower 125 mPa, the injection went smoothly. On the basis of these preliminary data, a system of scoring the needle-syringe-formulation system is proposed to rationalize and support the selection of the optimal diameter and length of needles, keeping also in consideration the pressure created in the subcutaneous space and muscles at the injection site.
Assuntos
Química Farmacêutica/métodos , Agulhas/normas , Preparações Farmacêuticas/química , Química Farmacêutica/normas , Injeções/instrumentação , Injeções/normas , Preparações Farmacêuticas/administração & dosagem , Preparações Farmacêuticas/normas , ViscosidadeRESUMO
Regenerated silk fibroin (SF) is a promising biomaterial to design drug delivery systems. To guarantee satisfactory prolonged release of loaded drugs, the native ß-sheet conformation of SF is generally induced by a final curing which can determine instability of the loaded drug. This work aimed to investigate the influence on SF conformation of the addition of hydrophilic polymers, namely poloxamer 188 (PEO), a range of poly(ethylenglycol) (PEG)and poly(vinyl pyrrolidone) (PVP) and drying conditions, namely spray-drying or evaporation at 60 °C. DSC data on spray-dried products indicated that SF in composite materials was in the random coil conformation. ATR-FTIR spectroscopy with Fourier self-deconvolution of the amide I band revealed that SF in spray dried products was partially organized in the ß-sheet structure only in presence of PEG4000. Both DSC and ATR-FTIR spectra registered on composite materials obtained by the slowest evaporation method indicated that all hydrophilic polymers favoured the ß-sheet conformation. This feature was attributed to the formation of H-bonds with the tyrosine residues of the semicrystalline region in SF. In conclusion, this approach to prepare of SF/hydrophilic polymer composites at slow evaporation rate leads to water insoluble materials which could be used in the development of drug delivery systems.
Assuntos
Produtos Biológicos/química , Portadores de Fármacos/química , Sistemas de Liberação de Medicamentos , Fibroínas/química , Animais , Produtos Biológicos/análise , Bombyx , Cristalização , Preparações de Ação Retardada , Composição de Medicamentos , Excipientes , Fibroínas/análise , Temperatura Alta , Polímeros , Conformação Proteica , Espectroscopia de Infravermelho com Transformada de Fourier/métodosRESUMO
CONTEXT: The selection of a proper taste-masking agent (TMA) is a critical issue in the development of fast-dissolving films containing bitter drugs. OBJECTIVE: This work is aimed to evaluate the suppression of the bitter taste of a maltodextrin fast-dissolving film loaded with 13.4 mg sodium diclofenac (DS) by adding TMAs. METHODS: The films were prepared by casting and drying aqueous mixtures of maltodextrin (DE = 6), glycerin, sorbitan oleate, and DS. Films were characterized in terms of thickness, tensile properties, film disintegration time, and drug dissolution time. The bitterness intensity of DS and the masking effect of TMAs were evaluated by an electronic tongue. RESULTS: The 'mint' and 'licorice' flavors and sucralose mixture resulted appropriate to mask DS bitterness as confirmed by a panel of volunteers. The addition of these TMAs did not significantly affect the film disintegration time (15-20 seconds) and DS dissolution rate (about 5 minutes). CONCLUSION: The electronic tongue was allowed to discriminate the effect of the TMA also in the presence of other hydrosoluble constituents of the film. Therefore, because of its simplicity and rapidity, this technique could assist or even replace the sensory evaluation in the development of fast-dissolving films.
Assuntos
Anti-Inflamatórios não Esteroides/administração & dosagem , Anti-Inflamatórios não Esteroides/química , Diclofenaco/administração & dosagem , Diclofenaco/química , Aromatizantes/química , Polissacarídeos/química , Tecnologia Farmacêutica/métodos , Administração através da Mucosa , Formas de Dosagem , Composição de Medicamentos , Sistemas de Liberação de Medicamentos , Eletrônica , Humanos , Solubilidade , Paladar , Resistência à Tração , LínguaRESUMO
This work aimed to develop a fast-dissolving film made of low dextrose equivalent maltodextrins (MDX) containing nicotine hydrogen tartrate salt (NHT). Particular attention was given to the selection of the suitable taste-masking agent (TMA) and the characterisation of the ductility and flexibility under different mechanical stresses. MDX with two different dextrose equivalents (DEs), namely DE 6 and DE 12, were selected in order to evaluate the effect of polymer molecular weight on film tensile properties. The bitterness and astringency intensity of NHT and the suppression effect of several TMA were evaluated by a Taste-Sensing System. The films were characterised in term of NHT content, tensile properties, disintegration time and drug dissolution test. As expected, placebo films made of MDX DE 6 appeared stiffer and less ductile than film prepared using MDX DE 12. The films disintegrated within 10 s. Among the tested TMA, the milk and mint flavours resulted particularly suitable to mask the taste of NHT. The addition of NHT and taste-masking agents affected film tensile properties; however, the effect of the addition of these components can be counterweighted by modulating the glycerine content and/or the MDX molecular weight. The feasibility of NHT loaded fast-dissolving films was demonstrated.
Assuntos
Sistemas de Liberação de Medicamentos , Aromatizantes/química , Nicotina , Polissacarídeos/química , Administração Oral , Química Farmacêutica , Formas de Dosagem , Composição de Medicamentos , Estudos de Viabilidade , Peso Molecular , Nicotina/administração & dosagem , Nicotina/química , Polímeros/química , Solubilidade , Paladar , Resistência à TraçãoRESUMO
A novel poly(sodium methacrylate, methylmethacrylate) hydrophilic pressure sensitive adhesive (PSA) containing a large amount of water was designed. The effects of PEG400, glycerin, sorbitol, and/or NaCl on the in vitro and in vivo adhesive properties were investigated by means of a 2(4) full factorial design. The optimized formulation, containing all independent variables at the highest value, was loaded with lidocaine hydrochloride (LH). This formulation permitted to obtain a 4-fold higher LH flux through human skin with respect to the marketed products.
Assuntos
Administração Cutânea , Polimetil Metacrilato/química , Adesividade , Adesivos , Adulto , Anestésicos Locais/administração & dosagem , Anestésicos Locais/química , Biofarmácia , Química Farmacêutica , Cromatografia Líquida de Alta Pressão , Sistemas de Liberação de Medicamentos , Eritema/induzido quimicamente , Excipientes , Glicerol/química , Humanos , Lidocaína/administração & dosagem , Lidocaína/química , Plastificantes , Polimetil Metacrilato/efeitos adversos , Absorção Cutânea , Cloreto de Sódio/química , Sorbitol/química , Espectrofotometria UltravioletaRESUMO
The effects of two contra-ions, namely benzoate (Bz) and oleate (Ol), on the in vitro human skin permeability of propranolol racemate (RS-PR) or S-enantiomer (S-PR) were studied. Saline solution (SS) or mineral oil (MO) were selected as vehicles. The MO increased the permeability coefficient (K(p)) of PR-Bz (pK(p) approximately 4) of about four times with respect to SS (pK(p) approximately 8) probably due to the ion pair formation. The steady-state flux of S-enantiomers resulted about twofold higher than that of racemates according to their lower melting temperatures with the exception of (S)-PR-Ol and (RS)-PR-Ol vehicled in SS which not resulted statistically different. This anomalous result could be explained considering the behavior of (RS)-PR-Ol or (S)-PR-Ol in aqueous solutions: these salts formed ion pairs which associated to form aggregates up to a concentration of 20 microg/mL as verified by light scattering. Therefore, their effective concentrations in SS resulted similar and justified the overlapped skin permeation profiles. All three considered variables, namely counterion, vehicle, and chirality, resulted mutually interfering on and deeply influenced the passive diffusion process of PR.
Assuntos
Benzoatos/farmacocinética , Ácido Oleico/farmacocinética , Propranolol/farmacocinética , Absorção Cutânea , Benzoatos/química , Varredura Diferencial de Calorimetria/métodos , Humanos , Técnicas In Vitro , Óleo Mineral/farmacocinética , Ácido Oleico/química , Permeabilidade , Veículos Farmacêuticos/farmacocinética , Propranolol/química , Cloreto de Sódio/farmacocinética , Solubilidade , Soluções/farmacocinética , EstereoisomerismoRESUMO
This work aimed to evaluate the effect induced by excipients conventionally used for topical dosage forms, namely isopropyl myristate (IPM) or oleic acid (OA) or polyethylene glycol 400 (PEG400) or Transcutol (TR), on the human skin permeability of terpinen-4-ol (T4OL) contained in the pure Tea tree oil. The effect of such excipients was determined by evaluating the absorption of T4OL using human epidermis and the perturbation of the organization of stratum corneum by ATR-FTIR. Among the tested excipients OA enhanced the absorption of T4OL by perturbing the stratum corneum lipid barrier. Other excipients caused a weak enhancement effect and their use should be carefully monitored.
Assuntos
Excipientes/farmacologia , Absorção Cutânea/efeitos dos fármacos , Pele/efeitos dos fármacos , Óleo de Melaleuca/metabolismo , Terpenos/metabolismo , Administração Cutânea , Epiderme/efeitos dos fármacos , Epiderme/metabolismo , Excipientes/administração & dosagem , Feminino , Humanos , Técnicas In Vitro , Permeabilidade , Pele/metabolismo , Espectroscopia de Infravermelho com Transformada de Fourier , Óleo de Melaleuca/química , Terpenos/químicaRESUMO
This work aimed to evaluate the flexibility of a novel pyrolytic carbon coated drug-eluting stent platform, which presents the peculiarity of deep sculptures realized on the stent's outer surface (reservoirs). Tacrolimus (TCR) or TCR/excipient mixtures were loaded into the reservoirs, and their permanence into stent's reservoirs was verified by an in vitro short-time release test in human blood. Moreover, the impact of the excipients on the TCR physical state and surface morphology of the reservoirs and the release kinetics were studied. The reservoirs resulted homogeneously filled. Upon exposure to blood, no loss of materials from reservoirs was observed, and the drug release after 15 min was negligible in all cases. The loading procedure caused the drug amorphization and, AFM revealed that the surfaces were smooth and homogeneous with the exception of the TCR/poloxamer 188 mixture where spatial oriented crystals were evident. Poly(N-vinyl pyrrolidone) improved the in vitro TCR release rate constants (K). Poly(methylmethacrylate) (PMM) significantly reduced the K value both in vitro and in vivo. Indeed, the in vivo drug concentrations in rabbit artery wall significantly decreased, decreasing the TCR/PMM ratio. The characteristics of the stent strut resulted suitable to load material with different physicochemical characteristics.
Assuntos
Sistemas de Liberação de Medicamentos , Stents Farmacológicos , Imunossupressores/administração & dosagem , Tacrolimo/administração & dosagem , Animais , Química Farmacêutica/métodos , Cristalização , Excipientes/química , Humanos , Poloxâmero/química , Polimetil Metacrilato/química , Polivinil/química , Pirrolidinas/química , Coelhos , Tecnologia Farmacêutica/métodosRESUMO
The antimicrobial, antifungal and anti-inflammatory properties of tea tree oil (TTO), the essential oil of Melaleuca alternifolia are well documented. In order to optimize its therapeutic activity, TTO patches were designed. The aim of this work was the formulation of monolayer patches containing TTO. Moreover, the performance of oleic acid (OA) as a skin penetration enhancer in patches was evaluated. Terpinen-4-ol (T4OL), the main component of TTO, was the marker used to evaluate TTO skin permeability. The permeation study was performed through human epidermis by using Franz diffusion cells. Patches were prepared by using methacrylic copolymers, Eudragit E100 (EuE100) or Eudragit NE (EuNE), and a silicone resin, BioPSA7-4602 (Bio-PSA). TTO and OA contents were fixed at 10% w/w and 3% w/w, respectively. The patches were prepared by a casting method and characterised in terms of T4OL content and skin permeability. All the selected polymers were suitable as the main component of the patch matrix. Since the main critical issue in the use of TTO is related to its toxicity after absorption, the local administration of TTO can take advantage of the use of patches based on EuE100 because of the high retained amount and the low permeation of T4OL. In this matrix, OA slightly increased the T4OL retained amount, improving the efficacy and safety of TTO patches.
Assuntos
Fármacos Dermatológicos/administração & dosagem , Fármacos Dermatológicos/química , Óleo de Melaleuca/administração & dosagem , Óleo de Melaleuca/química , Administração Cutânea , Química Farmacêutica , Formas de Dosagem , Humanos , Permeabilidade , PeleRESUMO
This study aimed to design methyprednisolone (MP)-loaded poly(D,L lactide-co-glycolide) (PLGA) microspheres (MS) intended for intra-articular administration. MP was encapsulated in four different types of PLGA by using an S/O/W technique. The effects of beta-irradiation at the dose of 25 kGy were evaluated on the chemical and physicochemical properties of MS and the drug release profiles. The S/O/W technique with hydroxypropylmethylcellulose (HPMC) as surfactant allowed obtaining MS in the tolerability size (7-50 microm) for intra-articular administration. The MP encapsulation efficiency ranged 56-60%. HPMC traces were evidenced in the loaded and placebo MS by attenuated total reflectance Fourier transform infrared spectroscopy. MS made of the capped PLGA DL5050 2M (MS 2M) and uncapped PLGA DL5050 3A (MS 3A) prolonged the release of MP over a 2- to 3-month period with a triphasic (burst release-dormant period-second release pulse) and biphasic release pattern, respectively. The beta-irradiation did not significantly alter the morphology, chemical, and physicochemical properties of MS. The only variation was evidenced in the drug release for MS 2M in term of shorting of the dormant period. The minimal variations in the properties of irradiated PLGA MS, which are in disagreement with literature data, may be attributed to a radioprotecting effect exerted by HPMC.
Assuntos
Articulações , Metilprednisolona/administração & dosagem , Varredura Diferencial de Calorimetria , Cromatografia em Gel , Cromatografia Líquida de Alta Pressão , Desenho de Fármacos , Derivados da Hipromelose , Ácido Láctico/química , Metilcelulose/análogos & derivados , Metilcelulose/química , Metilprednisolona/química , Microscopia Eletrônica de Varredura , Microesferas , Tamanho da Partícula , Placebos , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
This work aimed to study maltodextrins (MDX) with a low dextrose equivalent as film forming material and their application in the design of oral fast-dissolving films. The suitable plasticizer and its concentration were selected on the basis of flexibility, tensile strength and stickiness of MDX films, and the MDX/plasticizer interactions were investigated by ATR-FTIR spectroscopy. Flexible films were obtained by using 16-20% w/w glycerin (GLY). This basic formulation was adapted to the main production technologies, casting and solvent evaporation (Series C) or hot-melt extrusion (Series E), by adding sorbitan monoleate (SO) or cellulose microcrystalline (MCC), respectively. MCC decreased the film ductility and significantly affected the film disintegration time both in vitro and in vivo (Series C<10s; Series E approximately 1min). To assess the film loading capacity, piroxicam (PRX), a water insoluble drug, was selected. The loading of a drug as a powder decreased the film ductility, but the formulation maintained satisfactory flexibility and resistance to elongation for production and packaging procedures. The films present a high loading capacity, up to 25mg for a surface of 6cm(2). The PRX dissolution rate significantly improved in Series C films independently of the PRX/MDX ratio.
Assuntos
Portadores de Fármacos , Glicerol/química , Plastificantes/química , Polissacarídeos/química , Adesividade , Anti-Inflamatórios não Esteroides/química , Celulose/química , Química Farmacêutica , Formas de Dosagem , Composição de Medicamentos , Hexoses/química , Cinética , Piroxicam/química , Maleabilidade , Solubilidade , Tecnologia Farmacêutica/métodos , Resistência à TraçãoRESUMO
The main issue in the development of transdermal patches made of poly(ethyl acrylate, methyl methacrylate) (Eudragit NE 40D, PMM) is the shrinkage phenomenon during the spreading of the latex onto the release liner. To solve this problem, the latex is usually freeze-dried and then re-dissolved in an organic solvent (method 1). To simplify the production process, we prepared an adhesive matrix by adding to the commercial PMM latex a plasticizer and an additive (anti-shrinkage agent) that avoids the shrinkage of the water dispersion spread onto the release liner (method 2). In some cases the active ingredient itself, such as potassium diclofenac (DK) and nicotine (NT), works as anti-shrinkage agent. In this work, the effects of the preparation method, types and concentrations of the plasticizer (triacetin and tributyl citrate) on the adhesive properties of the transdermal patches were investigated. The adhesive properties of the prepared patch were determined by texture analysis, peel adhesion test and shear adhesion. The PMM/plasticizer interactions were evaluated by ATR-FTIR spectroscopy. Furthermore, the in vitro skin permeation profiles of DK and NT released from the patch were determined by Franz cell method. Generally speaking, the variables that mainly modify the adhesive properties are the concentration and type of the plasticizer. The skin permeation profiles of DK and NT from the patch prepared by method 2 overlapped with those obtained with the commercial products. The results underline that the PMM latex can be used conveniently in the development of transdermal patches.
Assuntos
Resinas Acrílicas/síntese química , Adesivos/síntese química , Polimetil Metacrilato/síntese química , Resinas Acrílicas/administração & dosagem , Resinas Acrílicas/farmacocinética , Adesividade , Adesivos/administração & dosagem , Adesivos/farmacocinética , Administração Cutânea , Humanos , Técnicas In Vitro , Polimetil Metacrilato/administração & dosagem , Polimetil Metacrilato/farmacocinética , Absorção Cutânea/efeitos dos fármacos , Absorção Cutânea/fisiologiaRESUMO
The suitability of a poly(sodium methacrylate, methyl methacrylate) (NaPMM), a novel mucoadhesive material, to prepare fast-dissolving microparticles containing nifedipine (NIF) in the range of 25-75% w/w was verified. Microparticles made of a low-viscosity hydroxypropylmethylcellulose (HPMC), were also prepared to compare the NIF release profile and bioadhesive properties. The release test was carried out in oversaturation conditions. The physical state of microparticles was also investigated. The formulation stability was evaluated over a 3-month period in long-term and accelerated conditions. The presence of amorphous NIF within freshly prepared microparticles was attributed to interactions between the drug and both polymers. NaPMM conferred to microparticles suitable mucoadhesive properties and significantly increased NIF dissolution rate in comparison to HPMC. Nevertheless, NIF apparent solubilities obtained by NaPMM microparticles were lower than those obtained by the HPMC set. After 3-month storage in the case of HPMC microparticles, NIF dissolution rate and supersaturation degree significantly decreased due to drug crystallization. As far as NaPMM microparticles are concerned, neither NIF dissolution rate nor apparent solubility significantly changed.
Assuntos
Sistemas de Liberação de Medicamentos , Nifedipino/administração & dosagem , Estabilidade de Medicamentos , Derivados da Hipromelose , Metilcelulose/administração & dosagem , Metilcelulose/análogos & derivados , Nifedipino/química , Polimetil Metacrilato/administração & dosagem , SolubilidadeRESUMO
In this study the skin permeation and the topical anti-inflammatory properties of ginger extracts were investigated. A commercial ginger dry extract (DE) and a gingerols-enriched dry extract (EDE) were evaluated for their in vivo topical anti-inflammatory activity by inhibition of Croton oil-induced ear oedema in mice. Furthermore, the feasibility of an anti-inflammatory plaster containing DE or EDE was evaluated. Since the in vivo activity was evaluated in mice, the ex vivo skin permeation study was performed by using mouse skin or human epidermis. The DE from the acetonic solution exerted a dose-dependent topical anti-inflammatory activity (ID (50) = 142 microg/cm (2)), not far from that of the potent reference substance indomethacin (ID (50) = 93 microg/cm (2)). Similarly, the EDE induced a dose-dependent oedema reduction though its potency (ID (50) = 181 microg/cm (2)) was slightly lower than that of DE. Increase of the 6-gingerol concentration in the extract did not improve the anti-inflammatory activity. The medicated plasters, containing 1 mg/cm (2) of the commercial DE or EDE, had good technological characteristics and exerted a significant antiphlogistic effect, too. By using the plaster containing EDE, the 6-gingerol amount that permeated through human epidermis was 6.9 microg/cm (2) while the amount that passed through mouse skin was 22.1 microg/cm (2). Nevertheless, the amounts of 6-gingerol permeated through human epidermis and mouse skin in the early period (8h) were comparable (p > 0.3). This preliminary result suggests that the anti-inflammatory effect observed in mice could also be exerted in humans.
Assuntos
Anti-Inflamatórios não Esteroides/farmacologia , Edema/prevenção & controle , Fitoterapia , Extratos Vegetais/farmacologia , Pele/efeitos dos fármacos , Zingiber officinale , Administração Cutânea , Animais , Anti-Inflamatórios não Esteroides/administração & dosagem , Anti-Inflamatórios não Esteroides/uso terapêutico , Catecóis , Óleo de Cróton , Relação Dose-Resposta a Droga , Edema/induzido quimicamente , Álcoois Graxos/administração & dosagem , Álcoois Graxos/farmacologia , Álcoois Graxos/uso terapêutico , Feminino , Humanos , Camundongos , Camundongos Pelados , Permeabilidade/efeitos dos fármacos , Extratos Vegetais/administração & dosagem , Extratos Vegetais/uso terapêuticoRESUMO
The present feasibility study was designed to obtain a monolayer patch containing oxybutynin (OXY) avoiding chemical permeation enhancers. The highest flux was obtained with a polydimethylsiloxane matrix patch. Because OXY crystals were detected in the matrix within a week, two amino methylmethacrylate copolymers (Eudragit E or Eudragit RS) were used as OXY crystallization inhibitors. A preliminary in vivo study indicated that flux from the stabilized patches had to be increased about 30-40%. This goal was reached by occlusion with a polyethylene layer.
Assuntos
Ácidos Mandélicos/farmacocinética , Antagonistas Muscarínicos/farmacocinética , Varredura Diferencial de Calorimetria , Composição de Medicamentos , Estudos de Viabilidade , Feminino , Humanos , Técnicas In Vitro , Ácidos Mandélicos/análise , Ácidos Mandélicos/farmacologia , Antagonistas Muscarínicos/análise , Antagonistas Muscarínicos/farmacologia , Permeabilidade/efeitos dos fármacos , Pele/efeitos dos fármacos , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Nitroflurbiprofen, NFP, a practically insoluble liquid drug, was microencapsulated in hydrophilic micromatrices made of poly(N-vinylpyrrolidone) (PVP), or polyaminomethacrylate (PAMA), or binary blends of polymers thereof. The PAMA/PVP miscibility was assessed both in the solid state (DSC and ATF-FTIR spectroscopy) and in solution by viscometric measurements. The in vitro NFP release test was carried out in over saturation condition to discriminate the increase of NFP apparent solubility (supersaturation degree, SD). Drug/polymer/polymer/water interactions were studied in silico by molecular dynamic (MD) simulations. PAMA and PVP resulted miscible only in aqueous solution. The release of NFP from microparticles occurred according to a non-monotonic pattern due to the formation of instable supersaturated systems and the drug separation in the dissolution medium. After 5 min, the SD was at least 3. The use of PVP/PAMA micromatrices reduced the instability of the supersaturated solutions. MD simulations evidenced that water molecules play a key role in the PAMA/PVP compatibilization process and in stabilization of NFP supersaturated systems by means of H-bond. The docking analyses here find a novel and successful application to predict the different ability of a drug to interact with polymeric blends in solution.