SNUPN deficiency causes a recessive muscular dystrophy due to RNA mis-splicing and ECM dysregulation.

SNURPORTIN-1, encoded by SNUPN, plays a central role in the nuclear import of spliceosomal small nuclear ribonucleoproteins. However, its physiological function remains unexplored. In this study, we investigate 18 children from 15 unrelated families who present with atypical muscular dystrophy and neurological defects. Nine hypomorphic SNUPN biallelic variants, predominantly clustered in the last coding exon, are ascertained to segregate with the disease. We demonstrate that mutant SPN1 failed to oligomerize leading to cytoplasmic aggregation in patients' primary fibroblasts and CRISPR/Cas9-mediated mutant cell lines. Additionally, mutant nuclei exhibit defective spliceosomal maturation and breakdown of Cajal bodies. Transcriptome analyses reveal splicing and mRNA expression dysregulation, particularly in sarcolemmal components, causing disruption of cytoskeletal organization in mutant cells and patient muscle tissues. Our findings establish SNUPN deficiency as the genetic etiology of a previously unrecognized subtype of muscular dystrophy and provide robust evidence of the role of SPN1 for muscle homeostasis.

∆4-3-oxo-5ß-reductase deficiency: favorable outcome in 16 patients treated with cholic acid.

BACKGROUND: Oral cholic acid therapy is an effective therapy in children with primary bile acid synthesis deficiencies. Most reported patients with this treatment have 3ß-hydroxy-Δ5-C27-steroid oxidoreductase deficiency. The aim of the study was the evaluation of cholic acid therapy in a cohort of patients with the rarer Δ4-3-oxosteroid 5ß-reductase (Δ4-3-oxo-R) deficiency. METHODS: Sixteen patients with Δ4-3-oxo-R deficiency confirmed by AKR1D1 gene sequencing who received oral cholic acid were retrospectively analyzed. RESULTS: First symptoms were reported early in life (median 2 months of age), with 14 and 3 patients having cholestatic jaundice and severe bleeding respectively. Fifteen patients received ursodeoxycholic acid before diagnosis, with partial improvement in 8 patients. Four patients had liver failure at the time of cholic acid initiation. All 16 patients received cholic acid from a median age of 8.1 months (range 3.1-159) and serum liver tests normalized in all within 6-12 months of treatment. After a median cholic acid therapy of 4.5 years (range 1.1-24), all patients were alive with their native liver. Median daily cholic acid dose at last follow-up was 8.3 mg/kg of body weight. All patients, but one, had normal physical examination and all had normal serum liver tests. Fibrosis, evaluated using liver biopsy (n = 4) or liver elastography (n = 9), had stabilized or improved. Cholic acid therapy enabled a 12-fold decrease of 3-oxo-∆4 derivatives in urine. Patients had normal growth and quality of life. The treatment was well tolerated without serious adverse events and signs of hepatotoxicity. CONCLUSIONS: Oral cholic acid therapy is a safe and effective treatment for patients with Δ4-3-oxo-R deficiency.

A Comparative Study of HA/DBM Compounds Derived from Bovine and Porcine for Bone Regeneration.

This comparative study investigated the tissue regeneration and inflammatory response induced by xenografts comprised of hydroxyapatite (HA) and demineralized bone matrix (DBM) extracted from porcine (P) and bovine (B) sources. First, extraction of HA and DBM was independently conducted, followed by chemical and morphological characterization. Second, mixtures of HA/DBM were prepared in 50/50 and 60/40 concentrations, and the chemical, morphological, and mechanical properties were evaluated. A rat calvarial defect model was used to evaluate the tissue regeneration and inflammatory responses at 3 and 6 months. The commercial allograft DBM Puros® was used as a clinical reference. Different variables related to tissue regeneration were evaluated, including tissue thickness regeneration (%), amount of regenerated bone area (%), and amount of regenerated collagen area (%). The inflammatory response was evaluated by quantifying the blood vessel area. Overall, tissue regeneration from porcine grafts was superior to bovine. After 3 months of implantation, the tissue thickness regeneration in the 50/50P compound and the commercial DBM was significantly higher (~99%) than in the bovine materials (~23%). The 50/50P and DBM produced higher tissue regeneration than the naturally healed controls. Similar trends were observed for the regenerated bone and collagen areas. The blood vessel area was correlated with tissue regeneration in the first 3 months of evaluation. After 6 months of implantation, HA/DBM compounds showed less regenerated collagen than the DBM-only xenografts. In addition, all animal-derived xenografts improved tissue regeneration compared with the naturally healed defects. No clinical complications associated with any implanted compound were noted.

A Novel Injectable Piezoelectric Hydrogel for Periodontal Disease Treatment.

Periodontal disease is a multifactorial, bacterially induced inflammatory condition characterized by the progressive destruction of periodontal tissues. The successful nonsurgical treatment of periodontitis requires multifunctional technologies offering antibacterial therapies and promotion of bone regeneration simultaneously. For the first time, in this study, an injectable piezoelectric hydrogel (PiezoGEL) was developed after combining gelatin methacryloyl (GelMA) with biocompatible piezoelectric fillers of barium titanate (BTO) that produce electrical charges when stimulated by biomechanical vibrations (e.g., mastication, movements). We harnessed the benefits of hydrogels (injectable, light curable, conforms to pocket spaces, biocompatible) with the bioactive effects of piezoelectric charges. A thorough biomaterial characterization confirmed piezoelectric fillers' successful integration with the hydrogel, photopolymerizability, injectability for clinical use, and electrical charge generation to enable bioactive effects (antibacterial and bone tissue regeneration). PiezoGEL showed significant reductions in pathogenic biofilm biomass (∼41%), metabolic activity (∼75%), and the number of viable cells (∼2-3 log) compared to hydrogels without BTO fillers in vitro. Molecular analysis related the antibacterial effects to be associated with reduced cell adhesion (downregulation of porP and fimA) and increased oxidative stress (upregulation of oxyR) genes. Moreover, PiezoGEL significantly enhanced bone marrow stem cell (BMSC) viability and osteogenic differentiation by upregulating RUNX2, COL1A1, and ALP. In vivo, PiezoGEL effectively reduced periodontal inflammation and increased bone tissue regeneration compared to control groups in a mice model. Findings from this study suggest PiezoGEL to be a promising and novel therapeutic candidate for the treatment of periodontal disease nonsurgically.

Cyclic strain of poly (methyl methacrylate) surfaces triggered the pathogenicity of Candida albicans.

Candida albicans is an opportunistic yeast and the primary etiological factor in oral candidiasis and denture stomatitis. The pathogenesis of C. albicans could be triggered by several variables, including environmental, nutritional, and biomaterial surface cues. Specifically, biomaterial interactions are driven by different surface properties, including wettability, stiffness, and roughness. Dental biomaterials experience repetitive (cyclic) stresses from chewing and biomechanical movements. Pathogenic biofilms are formed over these biomaterial surfaces under cyclic strain. This study investigated the effect of the cyclic strain (deformation) of biomaterial surfaces on the virulence of Candida albicans. Candida biofilms were grown over Poly (methyl methacrylate) (PMMA) surfaces subjected to static (no strain) and cyclic strain with different levels (ε˜x=0.1 and 0.2%). To evaluate the biomaterial-biofilm interactions, the biofilm characteristics, yeast-to-hyphae transition, and the expression of virulent genes were measured. Results showed the biofilm biomass and metabolic activity to be significantly higher when Candida adhered to surfaces subjected to cyclic strain compared to static surfaces. Examination of the yeast-to-hyphae transition showed pseudo-hyphae cells (pathogenic) in cyclically strained biomaterial surfaces, whereas static surfaces showed spherical yeast cells (commensal). RNA sequencing was used to determine and compare the transcriptome profiles of cyclically strained and static surfaces. Genes and transcription factors associated with cell adhesion (CSH1, PGA10, and RBT5), biofilm formation (EFG1), and secretion of extracellular matrix (ECM) (CRH1, ADH5, GCA1, and GCA2) were significantly upregulated in the cyclically strained biomaterial surfaces compared to static ones. Genes and transcription factors associated with virulence (UME6 and HGC1) and the secretion of extracellular enzymes (LIP, PLB, and SAP families) were also significantly upregulated in the cyclically strained biomaterial surfaces compared to static. For the first time, this study reveals a biomaterial surface factor triggering the pathogenesis of Candida albicans, which is essential for understanding, controlling, and preventing oral infections. STATEMENT OF SIGNIFICANCE: Fungal infections produced by Candida albicans are a significant contributor to various health conditions. Candida becomes pathogenic when certain environmental conditions change, including temperature, pH, nutrients, and CO2 levels. In addition, surface properties, including wettability, stiffness, and roughness, drive the interactions between Candida and biomaterials. Clinically, Candida adheres to biomaterials that are under repetitive deformation due to body movements. In this work, we revealed that when Candida adhered to biomaterial surfaces subjected to repetitive deformation, the microorganism becomes pathogenic by increasing the formation of biofilms and the expression of virulent factors related to hyphae formation and secretion of enzymes. Findings from this work could aid the development of new strategies for treating fungal infections in medical devices or implanted biomaterials.

Smart dental materials for antimicrobial applications.

Smart biomaterials can sense and react to physiological or external environmental stimuli (e.g., mechanical, chemical, electrical, or magnetic signals). The last decades have seen exponential growth in the use and development of smart dental biomaterials for antimicrobial applications in dentistry. These biomaterial systems offer improved efficacy and controllable bio-functionalities to prevent infections and extend the longevity of dental devices. This review article presents the current state-of-the-art of design, evaluation, advantages, and limitations of bioactive and stimuli-responsive and autonomous dental materials for antimicrobial applications. First, the importance and classification of smart biomaterials are discussed. Second, the categories of bioresponsive antibacterial dental materials are systematically itemized based on different stimuli, including pH, enzymes, light, magnetic field, and vibrations. For each category, their antimicrobial mechanism, applications, and examples are discussed. Finally, we examined the limitations and obstacles required to develop clinically relevant applications of these appealing technologies.

Alzheimer and Parkinson diseases, frontotemporal lobar degeneration and amyotrophic lateral sclerosis overlapping neuropathology start in the first two decades of life in pollution exposed urbanites and brain ultrafine particulate matter and industrial nanoparticles, including Fe, Ti, Al, V, Ni, Hg, Co, Cu, Zn, Ag, Pt, Ce, La, Pr and W are key players. Metropolitan Mexico City health crisis is in progress.

The neuropathological hallmarks of Alzheimer's disease (AD), Parkinson's disease (PD), frontotemporal lobar degeneration (FTLD), and amyotrophic lateral sclerosis (ALS) are present in urban children exposed to fine particulate matter (PM2.5), combustion and friction ultrafine PM (UFPM), and industrial nanoparticles (NPs). Metropolitan Mexico City (MMC) forensic autopsies strongly suggest that anthropogenic UFPM and industrial NPs reach the brain through the nasal/olfactory, lung, gastrointestinal tract, skin, and placental barriers. Diesel-heavy unregulated vehicles are a key UFPM source for 21.8 million MMC residents. We found that hyperphosphorylated tau, beta amyloid1-42, α-synuclein, and TAR DNA-binding protein-43 were associated with NPs in 186 forensic autopsies (mean age 27.45 ± 11.89 years). The neurovascular unit is an early NPs anatomical target, and the first two decades of life are critical: 100% of 57 children aged 14.8 ± 5.2 years had AD pathology; 25 (43.9%) AD+TDP-43; 11 (19.3%) AD + PD + TDP-43; and 2 (3.56%) AD +PD. Fe, Ti, Hg, Ni, Co, Cu, Zn, Cd, Al, Mg, Ag, Ce, La, Pr, W, Ca, Cl, K, Si, S, Na, and C NPs are seen in frontal and temporal lobes, olfactory bulb, caudate, substantia nigra, locus coeruleus, medulla, cerebellum, and/or motor cortical and spinal regions. Endothelial, neuronal, and glial damages are extensive, with NPs in mitochondria, rough endoplasmic reticulum, the Golgi apparatus, and lysosomes. Autophagy, cell and nuclear membrane damage, disruption of nuclear pores and heterochromatin, and cell death are present. Metals associated with abrasion and deterioration of automobile catalysts and electronic waste and rare earth elements, i.e., lanthanum, cerium, and praseodymium, are entering young brains. Exposure to environmental UFPM and industrial NPs in the first two decades of life are prime candidates for initiating the early stages of fatal neurodegenerative diseases. MMC children and young adults-surrogates for children in polluted areas around the world-exhibit early AD, PD, FTLD, and ALS neuropathological hallmarks forecasting serious health, social, economic, academic, and judicial societal detrimental impact. Neurodegeneration prevention should be a public health priority as the problem of human exposure to particle pollution is solvable. We are knowledgeable of the main emission sources and the technological options to control them. What are we waiting for?

Implicaciones de los virus Zika y Chikungunya en el semen durante la transmisión sexual / Implications of Zika and Chikungunya viruses in semen during sexual transmission

Introducción: Los brotes de enfermedades causados por los virus Zika (VZIK) y Chikungunya (VCHIK) representan un problema de salud pública para muchos países tropicales y subtropicales. Objetivo: Discutir las implicaciones del hallazgo del VZIK y del VCHIK en el semen, y su relación con la transmisión sexual y la fertilidad masculina. Métodos: Se realizó una revisión narrativa de la literatura usando artículos indexados en PubMed (Medline), Embase y Scopus. Información, análisis y síntesis: Si bien los mosquitos del género Aedes son el vector principal y transmiten ambos virus, la transmisión sexual es una vía de infección significativa del VZIK y una posible ruta alterna para el VCHIK. La diseminación de estas arbovirosis vía linfática y sanguínea contribuye a la infección de diversos tejidos, incluyendo el tracto reproductivo masculino, donde el VZIK puede persistir. La infección de los testículos y quizás también de las glándulas accesorias del sistema reproductor masculino, se asocia con síntomas genitourinarios o alteraciones espermáticas, relacionadas con la detección del virus por largos periodos. Aunque no hay evidencia contundente sobre la presencia del VCHIK en el tracto genital masculino, se ha hallado en orina y semen. Además, se ha sugerido una posible persistencia en macrófagos que pueden infiltrar diferentes tejidos periféricos y cumplir una función de reservorio. Conclusiones: Hay presencia y persistencia de los virus Zika y Chikungunya en el tracto reproductor masculino. La infección en el semen se asocia con la transmisión sexual del virus, y con la alteración en la producción y calidad de los espermatozoides, con consecuencias clínicas graves en la salud sexual y reproductiva de los hombres infectados(AU)

Introduction: Disease outbreaks caused by Zika (ZIKV) and Chikungunya (CHIKV) viruses represent a public health problem for many tropical and subtropical countries. Objective: To discuss the implications of finding ZIKV and CHIKV in semen, and their relationship to sexual transmission and male fertility. Methods: A narrative review of the literature was carried out using articles indexed in PubMed (Medline), Embase and Scopus. Information, Analysis and Synthesis: Although Aedes mosquitoes are the primary vector and transmit both viruses, sexual transmission is a significant route of infection for ZIKV and a possible alternate route for CHIKV. Spread of these arboviruses via lymphatic and blood routes contributes to infection of various tissues, including the male reproductive tract, where ZIKV may persist. Infection of the testes and probably of the accessory glands of the male reproductive system is associated with genitourinary symptoms or sperm alterations, related to the detection of the virus for long periods. Although there is no conclusive evidence of the presence of CHIKV in the male genital tract, it has been found in urine and semen. In addition, a possible persistence in macrophages that can infiltrate different peripheral tissues and function as reservoir has been suggested. Conclusions: Zika and Chikungunya viruses can be present and persist in the male reproductive tract. Infection in semen is associated with sexual transmission of the virus and with alterations in the production and quality of spermatozoa, with serious clinical consequences in the sexual and reproductive health of infected men(AU)

Successful vaginal delivery and maternal and perinatal outcomes in patients with a history of cesarean section and labor trial: cross-sectional study / Parto vaginal exitoso y resultados maternos y perinatales en pacientes con antecedente de cesárea y prueba de trabajo de parto: estudio de corte transversal

Objectives: To determine the proportion of successful vaginal deliveries in women with prior cesarean section; to describe maternal and perinatal complications; and to examine the factors associated with vaginal delivery. Materials and methods: Descriptive cross-sectional study of women with a history of cesarean delivery, gestational age of more than 24 weeks, singleton live fetuses, with prior vaginal delivery who received care in a high complexity public institution in 2019. Patients with a history of more than one cesarean section or myomectomy were excluded. Consecutive sampling was used. Sociodemographic and obstetric variables, delivery route and maternal and perinatal complications were measured. A descriptive analysis as well as a multivariate exploratory analysis of the factors associated with successful vaginal delivery were carried out. Results: Among 286 pregnant women included, the percentage of successful vaginal deliveries was 74.5 %. Maternal complications were identified in 3.2 % of vaginal delivery cases and in 6.8 % of cesarean births. Complications occurred in 1.3 % of all live neonates; there were 2 perinatal deaths. An association was found between successful vaginal delivery and a history of prior vaginal delivery (OR: 2.7; 95 % CI: 1.15-6.29); a Bishop score greater than 6 (OR: 2.2; 95 % CI: 1.03-4.56); spontaneous labor initiation (OR: 4.5; IC 95 % CI: 2.07-9.6); and maternal age under 30 years (OR:2.28; 95 % CI: 1.2-4.2). Conclusions: Vaginal delivery is a safe option to consider in patients with prior cesarean section, in particular in cases of spontaneous labor initiation or prior vaginal delivery. Prospective cohorts are needed in order to confirm these findings.

Objetivos: determinar la proporción de parto vaginal exitoso en mujeres con cesárea previa, describir las complicaciones maternas y perinatales, y realizar una aproximación a los factores asociados al parto vaginal. Materiales y métodos: estudio de corte transversal descriptivo. Se incluyeron mujeres con antecedente de un parto por cesárea, con edad gestacional mayor a 24 semanas y fetos únicos vivos que tuvieron prueba de parto vaginal, atendidas en una institución pública de alta complejidad en 2019. Se excluyeron aquellas pacientes con antecedente de más de una cesárea o miomectomía. Muestreo consecutivo. Se midieron variables sociodemográficas, obstétricas, vía del parto y complicaciones maternas y perinatales. Se hace análisis descriptivo y un análisis exploratorio multivariado de los factores asociados al parto vaginal exitoso. Resultados: de 286 gestantes incluidas, el porcentaje de éxito de parto vaginal fue del 74,5 %. Se identificaron complicaciones maternas en el 3,2 % de los partos vaginales y en el 6,8 % de las cesáreas. El 1,3 % de los recién nacidos tuvo alguna complicación. Hubo 2 muertes perinatales. Se encontró asociación entre parto vaginal exitoso y tener antecedente de parto vaginal (OR: 2,7; IC 95 %: 1,15-6,29); puntaje de Bishop mayor de 6 (OR: 2,2; IC 95 %: 1,03-4,56); inicio de trabajo de parto espontáneo (OR: 4,5; IC 95 %: 2,07-9,6); y edad materna menor de 30 años (OR: 2,28; IC 95 %: 1,2-4,2). Conclusiones: el parto vaginal es una opción segura para considerar en pacientes con cesárea anterior, especialmente si inician trabajo de parto espontáneo o han tenido un parto vaginal previamente. Se requieren cohortes prospectivas para confirmar estos hallazgos.

Conductance stability and Na+ interaction with Shab K+ channels under low K+ conditions.

K+ ions exert a structural effect that brings stability to K+ selective pores. Thus, upon bathing Shab channels in 0 K+ solutions the ion conductance, GK, irreversibly collapses. Related to this, studies with isolated KcsA channels have suggested that there is a transition [K+] around which the pore takes one of two conformations, either the low (non-conducting) or high K+ (conducting) crystal structures. We examined this premise by looking at the K+-dependency of GK stability of Shab channels within the cell membrane environment. We found that: K+ effect on GK stability is highly asymmetrical, and that as internal K+ is replaced by Na+ GK drops in a way that suggests a transition internal [K+]. Additionally, we found that external permeant ions inhibit GK drop with a potency that differs from the global selectivity-sequence of K+ pores; the non-permeant TEA inhibited GK drop in a K+-dependent manner. Upon lowering internal [K+] we observed an influx of Na+ at negative potentials. Na+ influx was halted by physiological external [K+], which also restored GK stability. Hyperpolarized potentials afforded GK stability but, as expected, do not restore GK selectivity. For completeness, Na+ interaction with Shab was also assessed at depolarized potentials by looking at Na block followed by permeation (pore unblock) at positive potentials, in solutions approaching the 0 K+ limit. The stabilizing effect of negative potentials along with the non-parallel variation of Na+ permeability and conductance-stability herein reported, show that pore stability and selectivity, although related, are not strictly coupled.

Antifungal Effect of Piezoelectric Charges on PMMA Dentures.

Candida-associated denture stomatitis is a recurring disease affecting up to 67% of denture wearers. Poly(methyl methacrylate) (PMMA) remains the main material employed in the fabrication of dentures due to its desirable physical, mechanical, and aesthetic properties. However, the improvement of its antimicrobial properties remains a challenge. To address this need, we developed PMMA composite filled with piezoelectric nanoparticles of barium titanate (BaTiO3) for therapeutic effects. Candida albicans biofilms were cultivated on the surface of the composites under continuous cyclic mechanical loading to activate the piezoelectric charges and to resemble mastication patterns. The interactions between biofilms and biomaterials were evaluated by measuring the biofilm biomass, metabolic activity, and the number of viable cells. To explore the antifungal mechanisms, changes in the expression of genes encoding adhesins and superoxide dismutase were assessed using reverse transcription-polymerase chain reaction. With the addition of piezoelectric nanoparticles, we observed a significant reduction in the biofilm formation and interference in the yeast-to-hyphae transition compared to the standard PMMA. Moreover, we observed that the cyclic deformation of biomaterial surfaces without antifungal agents produced increased biomass, metabolic activity, and a number of viable cells compared to the static/no-deformed surfaces. Cyclic deformation appears to be a novel mechanobiological signal that enables pathogenicity and virulence of C. albicans cells with increased expression of the yeast-to-hyphae transition genes. The outcome of this study opens new opportunities for the design of antifungal dentures for improved clinical service and reduced need for cleaning methods.

Multifunctional Dental Composite with Piezoelectric Nanofillers for Combined Antibacterial and Mineralization Effects.

After nearly seven decades of development, dental composite restorations continue to show limited clinical service. The triggering point for restoration failure is the degradation of the bond at the tooth-biomaterial interface from chemical, biological, and mechanical sources. Oral biofilms form at the bonded interfaces, producing enzymes and acids that demineralize hard tissues and damage the composite. Removing bacteria from bonded interfaces and remineralizing marginal gaps will increase restorations' clinical service. To address this need, we propose for the first time the use of piezoelectric nanoparticles of barium titanate (BaTiO3) as a multifunctional bioactive filler in dental resin composites, offering combined antibacterial and (re)mineralization effects. In this work, we developed and characterized the properties of dental piezoelectric resin composites, including the degree of conversion and mechanical and physical properties, for restorative applications. Moreover, we evaluated the antibacterial and mineralization responses of piezoelectric composites in vitro. We observed a significant reduction in biofilm growth (up to 90%) and the formation of thick and dense layers of calcium phosphate minerals in piezoelectric composites compared to control groups. The antibacterial mechanism was also revealed. Additionally, we developed a unique approach evaluating the bond strength of dentin-adhesive-composite interfaces subjected to simultaneous attacks from bacteria and cyclic mechanical loading operating in synergy. Our innovative bioactive multifunctional composite provides an ideal technology for restorative applications using a single filler with combined long-lasting nonrechargeable antibacterial/remineralization effects.

ANKRD11 variants: KBG syndrome and beyond.

Mutations affecting the transcriptional regulator Ankyrin Repeat Domain 11 (ANKRD11) are mainly associated with the multisystem developmental disorder known as KBG syndrome, but have also been identified in individuals with Cornelia de Lange syndrome (CdLS) and other developmental disorders caused by variants affecting different chromatin regulators. The extensive functional overlap of these proteins results in shared phenotypical features, which complicate the assessment of the clinical diagnosis. Additionally, re-evaluation of individuals at a later age occasionally reveals that the initial phenotype has evolved toward clinical features more reminiscent of a developmental disorder different from the one that was initially diagnosed. For this reason, variants in ANKRD11 can be ascribed to a broader class of disorders that fall within the category of the so-called chromatinopathies. In this work, we report on the clinical characterization of 23 individuals with variants in ANKRD11. The subjects present primarily with developmental delay, intellectual disability and dysmorphic features, and all but two received an initial clinical diagnosis of either KBG syndrome or CdLS. The number and the severity of the clinical signs are overlapping but variable and result in a broad spectrum of phenotypes, which could be partially accounted for by the presence of additional molecular diagnoses and distinct pathogenic mechanisms.

On the road to smart biomaterials for bone research: definitions, concepts, advances, and outlook.

The demand for biomaterials that promote the repair, replacement, or restoration of hard and soft tissues continues to grow as the population ages. Traditionally, smart biomaterials have been thought as those that respond to stimuli. However, the continuous evolution of the field warrants a fresh look at the concept of smartness of biomaterials. This review presents a redefinition of the term "Smart Biomaterial" and discusses recent advances in and applications of smart biomaterials for hard tissue restoration and regeneration. To clarify the use of the term "smart biomaterials", we propose four degrees of smartness according to the level of interaction of the biomaterials with the bio-environment and the biological/cellular responses they elicit, defining these materials as inert, active, responsive, and autonomous. Then, we present an up-to-date survey of applications of smart biomaterials for hard tissues, based on the materials' responses (external and internal stimuli) and their use as immune-modulatory biomaterials. Finally, we discuss the limitations and obstacles to the translation from basic research (bench) to clinical utilization that is required for the development of clinically relevant applications of these technologies.

Mitigating saliva aerosol contamination in a dental school clinic.

BACKGROUND: Transmission of COVID-19 via salivary aerosol particles generated when using handpieces or ultrasonic scalers is a major concern during the COVID-19 pandemic. The aim of this study was to assess the spread of dental aerosols on patients and dental providers during aerosol-generating dental procedures. METHODS: This pilot study was conducted with one volunteer. A dental unit used at the dental school for general dental care was the site of the experiment. Before the study, three measurement meters (DustTrak 8534, PTrak 8525 and AeroTrak 9306) were used to measure the ambient distribution of particles in the ambient air surrounding the dental chair. The volunteer wore a bouffant, goggles, and shoe covers and was seated in the dental chair in supine position, and covered with a surgical drape. The dentist and dental assistant donned bouffant, goggles, face shields, N95 masks, surgical gowns and shoe covers. The simulation was conducted by using a high-speed handpiece with a diamond bur operating in the oral cavity for 6 min without touching the teeth. A new set of measurement was obtained while using an ultrasonic scaler to clean all teeth of the volunteer. For both aerosol generating procedures, the aerosol particles were measured with the use of saliva ejector (SE) and high-speed suction (HSS) followed a separate set of measurement with the additional use of an extra oral high-volume suction (HVS) unit that was placed close to the mouth to capture the aerosol in addition to SE and HSS. The distribution of the air particles, including the size and concentration of aerosols, was measured around the patient, dentist, dental assistant, 3 feet above the patient, and the floor. RESULTS: Four locations were identified with elevated aerosol levels compared to the baseline, including the chest of the dentist, the chest of patient, the chest of assistant and 3 feet above the patient. The use of additional extra oral high volume suction reduced aerosol to or below the baseline level. CONCLUSIONS: The increase of the level of aerosol with size less than 10 µm was minimal during dental procedures when using SE and HSS. Use of HVS further reduced aerosol levels below the ambient levels.

Further delineation of the clinical spectrum of KAT6B disorders and allelic series of pathogenic variants.

PURPOSE: Genitopatellar syndrome and Say-Barber-Biesecker-Young-Simpson syndrome are caused by variants in the KAT6B gene and are part of a broad clinical spectrum called KAT6B disorders, whose variable expressivity is increasingly being recognized. METHODS: We herein present the phenotypes of 32 previously unreported individuals with a molecularly confirmed diagnosis of a KAT6B disorder, report 24 new pathogenic KAT6B variants, and review phenotypic information available on all published individuals with this condition. We also suggest a classification of clinical subtypes within the KAT6B disorder spectrum. RESULTS: We demonstrate that cerebral anomalies, optic nerve hypoplasia, neurobehavioral difficulties, and distal limb anomalies other than long thumbs and great toes, such as polydactyly, are more frequently observed than initially reported. Intestinal malrotation and its serious consequences can be present in affected individuals. Additionally, we identified four children with Pierre Robin sequence, four individuals who had increased nuchal translucency/cystic hygroma prenatally, and two fetuses with severe renal anomalies leading to renal failure. We also report an individual in which a pathogenic variant was inherited from a mildly affected parent. CONCLUSION: Our work provides a comprehensive review and expansion of the genotypic and phenotypic spectrum of KAT6B disorders that will assist clinicians in the assessment, counseling, and management of affected individuals.

Bioinspired Materials with Self-Adaptable Mechanical Properties.

Natural structural materials, such as bone, can autonomously modulate their mechanical properties in response to external loading to prevent failure. These material systems smartly control the addition/removal of material in locations of high/low mechanical stress by utilizing local resources guided by biological signals. On the contrary, synthetic structural materials have unchanging mechanical properties limiting their mechanical performance and service life. Inspired by the mineralization process of bone, a material system that adapts its mechanical properties in response to external mechanical loading is reported. It is found that charges from piezoelectric scaffolds can induce mineralization from surrounding media. It is shown that the material system can adapt to external mechanical loading by inducing mineral deposition in proportion to the magnitude of the stress and the resulting piezoelectric charges. Moreover, the mineralization mechanism allows a simple one-step route for fabricating functionally graded materials by controlling the stress distribution along the scaffold. The findings can pave the way for a new class of self-regenerating materials that reinforce regions of high stress or induce deposition of minerals on the damaged areas from the increase in mechanical stress to prevent/mitigate failure. It is envisioned that the findings can contribute to addressing the current challenges of synthetic materials for load-bearing applications from self-adaptive capabilities.

Chemical, structural and mechanical characterization of bovine enamel.

OBJECTIVE: The purpose of this investigation was to establish microstructure, microhardness, fracture toughness, chemical composition, and crack repair of bovine enamel and to compare these features with their human counterparts. DESIGN: Bovine enamel fragments were prepared and optical microscopy and atomic force microscopy were used to establish microstructure; Raman spectroscopy was used to estimate composition and microindentation using Vickers testing was performed to evaluate hardness. RESULTS: A strong dependence between indentation load and microhardness values was observed, as was the case in human enamel. Similar microstructure and chemical composition between bovine and human enamel, 7.89% lower microhardness and 40% higher fracture toughness values for bovine enamel were found. CONCLUSION: From a structural and mechanical standpoint, bovine enamel is a suitable alternative to human enamel for in vitro testing of dental products.

Identificación del marco de competencias laborales en enfermería en el Sistema del Seguro Social Costarricense / Identification of the occupational competencies framework in nursing in the Costa Rican Social Security / Identificação da estrutura de competências laborais em enfermagem na Previdência Social da Costa Rica

Resumen El objetivo de esta investigación fue identificar el marco de competencias laborales en enfermería en áreas específicas o complejas del cuidado, mediante la técnica de mapeo. Es un estudio transversal realizado entre noviembre 2017 y diciembre 2018, desarrollado en diversas etapas. En primera instancia se localizó la literatura en bases de datos como Google Scholar, PubMed, Scielo y BVS, de los cuales se consideró la utilidad y la relevancia del tema y el cómo ha sido abordado en diversos ámbitos, así como su impacto en la cotidianidad de la enfermería. Luego, se trabajó en la construcción de una matriz, a partir de los principales enunciados propuestos por Mertens y cuatro componentes en enfermería: ser, saber conocer, saber hacer y saber convivir. En una tercera etapa, se trabajó con 118 profesionales de diferentes especialidades y áreas específicas del cuidado, para la recolección de información. Finalmente, se analizó el producto generado por los grupos de expertos en enfermería y el referente teórico. De esta manera se logró la construcción de un marco teórico institucional por medio del análisis minucioso de la práctica clínica. Se concluye que la identificación de competencias laborales por medio del mapeo enriquece la comprensión de la naturaleza de trabajo y la valoración del dominio del conocimiento en el ámbito del cuidado.

Abstract The objective of this research was to identify the framework of occupational competencies in Nursing in specific or complex areas of care, through the mapping technique. A cross-sectional study was conducted between November 2017 and December 2018, and was developed in several stages: The literature was first searched in databases such as Google Scholar, PubMed, Scielo, and BVS. It was necessary to consider the usefulness and relevance of the topic studied and the way in which it has been addressed in various areas, as well as the impact it has for Nursing in the daily work. Subsequently, we worked on the construction of a matrix, based on the main statements proposed by Mertens and considered four components in Nursing: being, knowing how to know, knowing how to do and knowing how to live together. In a third stage, we worked with 118 nursing professionals from different specialties and specific areas of care, based on the previous matrix as an instrument for data collection. Finally, in the fourth stage, the product generated by the groups of experts in Nursing and the theoretical reference was analyzed. In this manner, the construction of an institutional theoretical framework through a thorough analysis of clinical practice. It concluded that the identification of labor competencies through mapping enriches the understanding of the nature of work and the assessment of the domain of knowledge in the field of care.

Resumo O objetivo desta pesquisa foi identificar o arcabouço das competências ocupacionais em Enfermagem em áreas específicas ou complexas do cuidado, por meio da técnica de mapeamento. É um estudo transversal realizado entre novembro de 2017 e dezembro de 2018, o estudo foi desenvolvido em várias etapas; A literatura foi pesquisada em bases de dados como Google Acadêmico, PubMed, Scielo e BVS. Foi necessário considerar a utilidade e relevância do tema estudado e a forma como ele tem sido abordado em diversas áreas, bem como o impacto que ele tem para a enfermagem no cotidiano do trabalho. Posteriormente, trabalhamos na construção de uma matriz, baseada nos principais enunciados propostos por Mertens e consideramos quatro componentes na Enfermagem: ser, saber como saber, saber fazer e saber conviver. Em uma terceira etapa, trabalhamos com 118 profissionais de enfermagem de diferentes especialidades e áreas específicas de atendimento, com base na matriz anterior como instrumento de coleta de dados. Por fim, na quarta etapa analisou-se o produto gerado pelos grupos de especialistas em Enfermagem e o referencial teórico. Desta forma, a construção de um referencial teórico institucional através de uma análise aprofundada da prática clínica. Conclui-se que a identificação das competências laborais através do mapeamento enriquece a compreensão da natureza do trabalho e a avaliação do domínio do conhecimento no campo do cuidado.

Desensitization and Recovery of Crayfish Photoreceptors Upon Delivery of a Light Stimulus.

A method to study desensitization and recovery of crayfish photoreceptors is presented. We performed intracellular electrical recordings of photoreceptor cells in isolated eyestalks using the discontinuous single electrode-switched voltage-clamp configuration. First, with a razor blade we made an opening in the dorsal cornea to get access to the retina. Thereafter, we inserted a glass electrode through the opening, and penetrated a cell as reported by the recording of a negative potential. Membrane potential was clamped at the photoreceptor's resting potential and a light-pulse was applied to activate currents. Finally, the two light-flash protocol was employed to measure current desensitization and recovery. The first light-flash triggers, after a lag period, the transduction ionic current, which after reaching a peak amplitude decays towards a desensitized state; the second flash, applied at varying time intervals, assesses the state of the light-activated conductance. To characterize the light-elicited current, three parameters were measured: 1) latency (the time elapsed between light flash delivery and the moment in which current achieves 10% of its maximum value); 2) peak current; and 3) desensitization time constant (exponential time constant of the current decay phase). All parameters are affected by the first pulse. To quantify recovery from desensitization, the ratio p2/p1 was employed versus time between pulses. p1 is the peak current evoked by the first light-pulse, and p2 is the peak current evoked by the second pulse. These data were fitted to a sum of exponential functions. Finally, these measurements were carried out as function of circadian time.