Chitosan as a stabilizer and size-control agent for synthesis of porous flower-shaped palladium nanoparticles and their applications on photo-based therapies.

This study reported a newly developed green synthesis method using chitosan and vitamin C to prepare porous flower-shaped palladium nanoparticles. We found that chitosan not only worked as a stabilizer but also as a size-control agent for the synthesis of these nanoparticles. The growth model of flower-shaped palladium nanoparticles was proposed to interpret mechanistic understanding. The obtained nanoparticles showed good biocompatibility and strong near-infrared absorption. The nanoparticles were successfully demonstrated to be highly efficient for both in vitro photothermal therapy and in vitro photoacoustic imaging.

Synthesis of Silica-Coated Magnetic Hydroxyapatite Composites for Drug Delivery Applications.

We have prepared a core-shell magnetic silica-coated hydroxyapatite, Fe3O4@SiO2@HAp composite materials for pH-responsive drug delivery applications. Captopril (Cap) and ibuprofen (Ibu) were chosen as model hydrophilic and hydrophobic drugs, respectively. The drugs were encapsulated into the Fe3O4@SiO2@HAp composite via electrostatic interactions with existing amine and carboxylic acid groups during calcium phosphate shell formation. The formation of calcium phosphate shell not only protects the encapsulated drugs from leaching but also controls the release rate of drugs from the composite system depending on various pH conditions. We have tested the release behavior of Cap and Ibu drugs under different pH conditions such as neutral pH (pH 7.4) and acidic pH (pH 5.0), respectively. The study result reveals that the synthesized Fe3O4@SiO2@HAp composite is suitable for release of both water soluble and water insoluble drugs based on a pH-responsive controlled manner.

Photoacoustic Imaging-Guided Photothermal Therapy with Tumor-Targeting HA-FeOOH@PPy Nanorods.

Cancer theragnosis agents with both cancer diagnosis and therapy abilities would be the next generation of cancer treatment. Recently, nanomaterials with strong absorption in near-infrared (NIR) region have been explored as promising cancer theragnosis agents for bio-imaging and photothermal therapy (PTT). Herein, we reported the synthesis and application of a novel multifunctional theranostic nanoagent based on hyaluronan (HA)-coated FeOOH@polypyrrole (FeOOH@PPy) nanorods (HA-FeOOH@PPy NRs) for photoacoustic imaging (PAI)-guided PTT. The nanoparticles were intentionally designed with rod-like shape and conjugated with tumor-targeting ligands to enhance the accumulation and achieve the entire tumor distribution of nanoparticles. The prepared HA-FeOOH@PPy NRs showed excellent biocompatible and physiological stabilities in different media. Importantly, HA-FeOOH@PPy NRs exhibited strong NIR absorbance, remarkable photothermal conversion capability, and conversion stability. Furthermore, HA-FeOOH@PPy NRs could act as strong contrast agents to enhance PAI, conducting accurate locating of cancerous tissue, as well as precise guidance for PTT. The in vitro and in vivo photothermal anticancer activity results of the designed nanoparticles evidenced their promising potential in cancer treatment. The tumor-bearing mice completely recovered after 17 days of PTT treatment without obvious side effects. Thus, our work highlights the great potential of using HA-FeOOH@PPy NRs as a theranostic nanoplatform for cancer imaging-guided therapy.

Coating Chitosan Thin Shells: A Facile Technique to Improve Dispersion Stability of Magnetoliposomes.

Magnetoliposomes (ML) have been emerging as a novel multifunctional nanoparticle with a wide range of biomedical and therapeutic applications over the past decade. Although the ML system has shown excellent performances, the stability and lipid peroxidation of liposomal components are still remaining as key issues and need to be solved for intensive applications. Changing zeta potential of nanoparticles' surface can be seen as a potential way to achieve the stable dispersion. In this work, we have employed the positive charged, abundant and cheap chitosan to coat ML in order to change the zeta potential of the ML system and examined the stability of chitosan@magnetoliposomes (CML) in long-term storage. The combining of pH-sensitive chitosan with temperature-sensitive phospholipid formed a novel pH- and temperature-sensitive nanoparticles which can be promisingly used as controllable drug release applications. These novel CML with chitosan thin shells showed excellent stability in long-term storage; meanwhile, the bare ML sample showed aggregations and forming micrometer-size particles. The CML system can achieve a drug encapsulation efficiency of nearly 50% and an enhanced drug release behavior under pH 5 at 45 °C.

Fucoidan-coated CuS nanoparticles for chemo-and photothermal therapy against cancer.

In advanced cancer therapy, the combinational therapeutic effect of photothermal therapy (PTT) using near-infrared (NIR) light-responsive nanoparticles (NPs) and anti-cancer drug delivery-mediated chemotherapy has been widely applied. In the present study, using a facile, low-cost, and solution-based method, we developed and synthesized fucoidan, a natural polymer isolated from seaweed that has demonstrated anti-cancer effect, and coated NPs with it as an ideal candidate in chemo-photothermal therapy against cancer cells. Fucoidan-coated copper sulfide nanoparticles (F-CuS) act not only as a nanocarrier to enhance the intracellular delivery of fucoidan but also as a photothermal agent to effectively ablate different cancer cells (e.g., HeLa, A549, and K562), both in vitro and in vivo, with the induction of apoptosis under 808 nm diode laser irradiation. These results point to the potential usage of F-CuS in treating human cancer.

In vivo photoacoustic monitoring using 700-nm region Raman source for targeting Prussian blue nanoparticles in mouse tumor model.

Photoacoustic imaging (PAI) is a noninvasive imaging tool to visualize optical absorbing contrast agents. Due to high ultrasonic resolution and superior optical sensitivity, PAI can be used to monitor nanoparticle-mediated cancer therapy. The current study synthesized Food and Drug Administration-approved Prussian blue (PB) in the form of nanoparticles (NPs) with the peak absorption at 712 nm for photoacoustically imaging tumor-bearing mouse models. To monitor PB NPs from the background tissue in vivo, we also developed a new 700-nm-region stimulated Raman scattering (SRS) source (pulse energy up to 200 nJ and repetition rate up to 50 kHz) and implemented optical-resolution photoacoustic microscopy (OR-PAM). The SRS-assisted OR-PAM system was able to monitor PB NPs in the tumor model with micrometer resolution. Due to strong light absorption at 712 nm, the developed SRS light yielded a two-fold higher contrast from PB NPs, in comparison with a 532-nm pumping source. The proposed laser source involved cost-effective and simple system implementation along with high compatibility with the fiber-based OR-PAM system. The study highlights the OR-PAM system in conjunction with the tunable-color SRS light source as a feasible tool to assist NP-mediated cancer therapy.

Multimodal tumor-homing chitosan oligosaccharide-coated biocompatible palladium nanoparticles for photo-based imaging and therapy.

Palladium, a near-infrared plasmonic material has been recognized for its use in photothermal therapy as an alternative to gold nanomaterials. However, its potential application has not been explored well in biomedical applications. In the present study, palladium nanoparticles were synthesized and the surface of the particles was successfully modified with chitosan oligosaccharide (COS), which improved the biocompatibility of the particles. More importantly, the particles were functionalized with RGD peptide, which improves particle accumulation in MDA-MB-231 breast cancer cells and results in enhanced photothermal therapeutic effects under an 808-nm laser. The RGD peptide-linked, COS-coated palladium nanoparticles (Pd@COS-RGD) have good biocompatibility, water dispersity, and colloidal and physiological stability. They destroy the tumor effectively under 808-nm laser illumination at 2 W cm-2 power density. Further, Pd@COS-RGD gives good amplitude of photoacoustic signals, which facilitates the imaging of tumor tissues using a non-invasive photoacoustic tomography system. Finally, the fabricated Pd@COS-RGD acts as an ideal nanotheranostic agent for enhanced imaging and therapy of tumors using a non-invasive near-infrared laser.

Correction: Prussian blue decorated mesoporous silica hybrid nanocarriers for photoacoustic imaging-guided synergistic chemo-photothermal combination therapy.

Correction for 'Prussian blue decorated mesoporous silica hybrid nanocarriers for photoacoustic imaging-guided synergistic chemo-photothermal combination therapy' by Madhappan Santha Moorthy et al., J. Mater. Chem. B, 2018, DOI: .

Synthesis and In Vitro Performance of Polypyrrole-Coated Iron-Platinum Nanoparticles for Photothermal Therapy and Photoacoustic Imaging.

Multifunctional nano-platform for the combination of photo-based therapy and photoacoustic imaging (PAI) for cancer treatment has recently attracted much attention to nanotechnology development. In this study, we developed iron-platinum nanoparticles (FePt NPs) with the polypyrrole (PPy) coating as novel agents for combined photothermal therapy (PTT) and PAI. The obtained PPy-coated FePt NPs (FePt@PPy NPs) showed excellent biocompatibility, photothermal stability, and high near-infrared (NIR) absorbance for the combination of PTT and PAI. In vitro investigation experimentally demonstrated the effectiveness of FePt@PPy NPs in killing cancer cells with NIR laser irradiation. Moreover, the phantom test of PAI used in conjunction with FePt@PPy NPs showed a strong photoacoustic signal. Thus, the novel FePt@PPy NPs could be considered as promising multifunctional nanoparticles for further applications of photo-based diagnosis and treatment.

pH and NIR-light-responsive magnetic iron oxide nanoparticles for mitochondria-mediated apoptotic cell death induced by chemo-photothermal therapy.

Recently, various therapeutic strategies in anticancer drug development are focused to reduce adverse side effects and to enhance the therapeutic efficacy. Mostly, the iron oxide (Fe3O4) nanoparticles have widely been utilized as an efficient drug delivery system towing to their unique properties such as excellent magnetic behavior, considerably low toxicity, easy surface modification and high drug-loading efficacy. In the present study, we synthesized a multifunctional, DMSA coated, water soluble Fe3O4 nanoparticles (Fe3O4@DMSA/DOX) for an effective pH and NIR-light triggered delivery of anticancer drug (DOX) in cancer therapy. The combination of photothermal therapy combined with chemotherapy results demonstrated that the synthesized Fe3O4@DMSA/DOX is an excellent candidate for pH- and NIR-light induced phothothermal agent for an effective delivery of anticancer drug (DOX) into the target sub-cellular level into the human breast cancer (MDA-MB-231) cells. Furthermore, the Fe3O4@DMSA/DOX nanoparticles induced an excellent temperature elevation upon NIR light irradiation and controlled DOX release in vitro. The Fe3O4@DMSA/DOX nanoparticles exhibited synergistic effect when combining chemotherapy with photothermal therapy and showed an excellent cell toxicity to MDA-MB-231 cells. In addition, the combined chemo-photothermal therapy of Fe3O4@DMSA/DOX nanoparticles promoted an effective cell death by mitochondrial disruption mediated by ROS generation. Thus, the synthesized Fe3O4@DMSA/DOX nanoparticles could be utilized as potential anticancer agents for breast cancer treatment.

Chlorin e6 conjugated silica nanoparticles for targeted and effective photodynamic therapy.

Photodynamic therapy (PDT) using photosensitizer drug has become an important therapeutic modality. However, the stability and targeted delivery of photosensitizer remain a critical challenge for efficient PDT treatment. In the present study, we developed chlorin e6 (Ce6)-conjugated and folic acid (FA)-decorated silica nanoparticles (silica-Ce6-FA) for targeted delivery of photosensitizer to the cancer cells. The synthesized NPs exhibited excellent stability and biocompatibility with MDA-MB-231 cells. The formulated particles were efficiently taken up by folate receptor-positive MDA-MB-231 cells, which were confirmed by comparative analysis with folate receptor-negative HepG2 cells. The folate receptor-targeted silica-Ce6-FA was highly accumulated inside the MDA-MB-231 cells than free Ce6. The obtained NPs produced singlet oxygen efficiently under 670-nm laser exposure. The cell-killing effect of silica-Ce6-FA was higher when compared with free Ce6 under PDT treatment. The PDT-induced mitochondrial damage and apoptotic cell death were detected in silica-Ce6-FA-treated cells.

Chlorin e6 conjugated copper sulfide nanoparticles for photodynamic combined photothermal therapy.

The photo-based therapeutic approaches have attracted tremendous attention in recent years especially in treatment and management of tumors. Photodynamic and photothermal are two major therapeutic modalities which are being applied in clinical therapy. The development of nanomaterials for photodynamic combined with photothermal therapy has gained significant attention for its treatment efficacy. In the present study, we designed chlorin e6 (Ce6) conjugated copper sulfide (CuS) nanoparticles (CuS-Ce6 NPs) through amine functionalization and the synthesized nanoparticles act as a dual-model agent for photodynamic therapy and photothermal therapy. CuS-Ce6 NPs showed enhanced photodynamic effect through generation of singlet oxygen upon 670nm laser illumination. The same nanoparticles exerted thermal response under an 808nm laser at 2W/cm2. The fabricated nanoparticles did not show any cytotoxic effect toward breast cancer cells in the absence of light. In vitro cell viability assay showed a potent cytotoxicity in photothermal and photodynamic treatment. Rather than singular treatment, the photodynamic combined photothermal treatment showed an enhanced cytotoxic effect on treated cells. In addition, the CuS-Ce6 NPs exert a photoacoustic signal for non-invasive imaging of treated cells in tissue-mimicking phantom. In conclusion the CuS-Ce6 NPs act as multimodal agent for photo based imaging and therapy.

Magnetic hyperthermia and pH-responsive effective drug delivery to the sub-cellular level of human breast cancer cells by modified CoFe2O4 nanoparticles.

Magnetic iron oxide nanoparticles (MNPs) have been extensively utilized in a wide range of biomedical applications including magnetic hyperthermia agent. To improve the efficiency of the MNPs in therapeutic applications, in this study, we have synthesized CoFe2O4 nanoparticles and its surface was further functionalized with meso-2,3-dimercaptosuccinic acid (DMSA). The anticancer agent, Doxorubucin (DOX) was conjugated with CoFe2O4@DMSA nanoparticle to evaluate the combined effects of thermotherapy and chemotherapy. The drug delivery efficiency of the DOX loaded CoFe2O4@DMSA nanoparticles were examined based on magnetically triggered delivery of DOX into the subcellular level of cancer cells by using MDA-MB-231 cell line. The amine part of the DOX molecules were effectively attached through an electrostatic interactions and/or hydrogen bonding interactions with the carboxylic acid groups of the DMSA functionalities present onto the surface of the CoFe2O4 nanoparticles. The DOX loaded CoFe2O4@DMSA nanoparticles can effectively uptake with cancer cells via typical endocytosis process. After endocytosis, DOX release from CoFe2O4 nanoparticles was triggered by intracellular endosomal/lysosomal acidic environments and the localized heat can be generated under an alternating magnetic field (AMF). In the presence of AMF, the released DOX molecules were accumulated with high concentrations into the subcellular level at a desired sites and exhibited a synergistic effect of an enhanced cell cytotoxicity by the combined effects of thermal-chemotherapy. Importantly, pH- and thermal-responsive Dox-loaded CoFe2O4 nanoparticles induced significant cellular apoptosis more efficiently mediated by active mitochondrial membrane and ROS generation than the free Dox. Thus, the Dox-loaded CoFe2O4@DMSA nanoparticles can be used as a potential therapeutic agent in cancer therapy by combining the thermo-chemotherapy techniques.

Astaxanthin conjugated polypyrrole nanoparticles as a multimodal agent for photo-based therapy and imaging.

Polymeric nanoparticles are emerging as promising candidates for photo-based therapy and imaging due to their versatile chemical properties and easy fabrication and functionalization. In the present study we synthesized polypyrrole nanoparticles by stabilization with astaxanthin conjugated bovine serum albumin polymer (PPy@BSA-Astx). The synthesized nanoparticles were biocompatible with MBA-MD-231 and HEK-293 cells. Interestingly, the fabricated nanoparticles produced reactive oxygen species under 808-nm laser exposure and exerted a hyperthermic effect when the power density of the laser was increased. The photodynamic efficiency of PPy@BSA-Astx was measured by DPBF assay, and it was found to generate sufficient amount of reactive radicals to kill the cells at a power density of 0.3W/cm2. In photothermal aspect, the temperature level was reached to 57°C within 5min at 1W/cm2 power density, at the concentration of 50µg/mL. The in vitro cell toxicity studies showed concentration dependent photothermal and photodynamic toxicity. Fluorescence microscopic investigation explored the cell death and intra-cellular organ destruction by photodynamic treatment. In addition, we observed a strong photoacoustic signal from a tissue mimicking phantom study of nanoparticle treated MBA-MD-231 cells. In conclusion, the fabricated PPy@BSA-Astx nanoparticles can be used as photoacoustic imaging based prognostic agents for photothermal or photodynamic treatment.

Functionalized mesoporous silicas with crown ether moieties for selective adsorption of lithium ions in artificial sea water.

Lithium ion has been increasingly recognized in a wide range of industrial applications. In this work, we studied on the adsorption of Li+ in the artificial seawater with high selectivity using methyl-crown ether (AC-SBA-15) and aza-crown ether (HMC-SBA-15) moieties-functionalized mesoporous silica materials. First, methyl-crown ether and aza-crown ether moieties-functionalized mesoporous silica materials were synthesized via two-step post-synthesis process using a grafting method. The functionalized materials were employed to the metal ion adsorption from aqueous solution (artificial seawater) containing Li+, Co2+, Cr3+ and Hg2+. The prepared hybrid material showed high selectivity for Li+ ion in the artificial seawater at pH 8.0. The absorbed amount of Li+ was 73 times higher than Cr3+ for aza-crown ether containing AC-SBA-15 as an absorbent. The absorbed amount of Co2+ (4.5 x 10(-5) mol/g), Cr3+ (1.5 x 10(-5) mol/g) and Hg2+ (2.25 x 10(-4) mol/g) were remarkably lower than the case of Li+. On the other hand, the absorbed amount of various metal ions of HMC-SBA-15 with amine groups in alky chains and crown ether moieties were 1.1 x 10(-3) mol/g for Li+, 5.0 x 10(-5) mol/g for Co2+, 2.9 x 10(-4) mol/g for Cr3+, 2.8 x 10(-4) mol/g for Hg2+ mol/g, respectively.

Cyclic ligand functionalized mesoporous silica (SBA-15) for selective adsorption of Co2+ ion from artificial seawater.

Hard donor atoms (N and O) containing macrocyclic ligand was synthesized and further functionalized with mesoporous SBA-15 materials by chemical modification method. The modification was achieved by the immobilization of 3-chloropropyltriethoxysilane (CIPTES) onto mesoporous silica surface followed by post grafting route. The resulting material (Py-Cy-SBA-15) has been characterized by low angle X-ray diffraction (XRD), nitrogen adsorption-desorption isotherm, Fourier-transform infrared (FT-IR) spectroscopy, 29Si and 13C CP MAS NMR spectroscopic analyses, Thermogravimetric analysis (TGA) and elemental analysis. The long range orders of the materials were identified by transmission electron microscopy (TEM). The functionalized material was employed to the heavy metal ions adsorption from aqueous solution containing Cu2+, Co2+, Zn2+, Cd2+ and Cr2+. The prepared hybrid material showed high selectivity and adsorption capacity for Co2+ ion at pH 8.0.

Mesoporous organosilica hybrids with a tunable amphoteric framework for controlled drug delivery.

The chemical conversion of nitrile groups integrated in the pore wall frameworks of mesoporous organosilica hybrids (MSHs) into either carboxylic acid groups or amine groups by an acid or base hydrolysis method without altering the mesostructural order is suggested. By this approach, bifunctional derivatives could be produced in the silica pore walls. The nitrile groups integrated covalently into the pore walls of the mesoporous organosilica hybrids were converted to reactive functionalities, such as carboxylic acid (-COOH) or amine (-NH2) groups, by treatment with H2SO4 or LiAlH4 as the catalytic reagents. This facile approach allows the production of high amounts of either -COOH groups (3.26 mmol g-1) or amine (-NH2) groups (4.13 mmol g-1) into the pore walls of the mesoporous organosilica hybrids. The synthesised materials were characterised by X-ray diffraction, N2 sorption isotherms, Fourier transform infrared spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and solid state 13C cross-polarization magic angle spinning nuclear magnetic resonance spectroscopy (CP MAS NMR). Owing to the presence of hydrophilic basic diurea functional groups and -COOH or -NH2 derivatives in the pore walls, the obtained samples could behave like bifunctional materials. The mesoporous organosilica hybrids with chemically derivatised carboxylic acid groups or amine functionalities in the pore wall frameworks were found to be suitable drug carriers for the controlled delivery of both hydrophilic (for example, 5-FU) and hydrophobic (e.g. IBU) drugs under an intracellular environment. The biocompatibility of the synthesised materials was also evaluated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The cellular uptake was monitored by confocal laser scanning microscopy (CLSM). These results show that the synthesised materials have potential use as efficient carriers for drug delivery applications.

A modified mesoporous silica optical nanosensor for selective monitoring of multiple analytes in water.

A new modified mesoporous silica nanosensor was synthesized by the co-condensation method. Under basic conditions, the obtained mesoporous silica nanosensor responds selectively to Fe(2+) (pH = 8) and Cu(2+) (pH = 12) with a distinguishable colour change perceivable by the naked eye and a detection limit of approximately 50 ppb.