RESUMO
The in situ study of fractal microstructure in nanocarbon polymers is an actual task for their application and for the improvement in their functional properties. This article presents a visualization of the bulk structural features of the composites using pulsed acoustic microscopy and synchrotron X-ray microtomography. This article presents details of fractal structure formation using carbon particles of different sizes and shapes-exfoliated graphite, carbon platelets and nanotubes. Individual structural elements of the composite, i.e., conglomerations of the particles in the air capsule as well as their distribution in the composite volume, were observed at the micro- and nanoscale. We have considered the influence of particle architecture on the fractal formation and elastic properties of the composite. Acoustic and X-ray imaging results were compared to validate the carbon agglomeration.
RESUMO
The structural features and antibacterial properties of polymer-porphyrin composites were investigated. Meso-substituted arylporphyrin 0.2-0.5 wt.% was immobilized in a polylactide matrix. The immobilization of porphyrin causes a bathochromic shift and splitting of the Soret band. This study of the morphology of the obtained composites demonstrated a uniform distribution of the meso-substituted arylporphyrin in the polylactide matrix. It was determined by the X-ray diffraction analysis that porphyrin does not affect the α-form of polylactide crystalline formations. However, its addition into the polymer somewhat reduces the melting point (by 1-2 °C) and the degree of crystallinity of polylactide (by 3-4%). The elastic characteristics of the resulting systems were determined by the ultrasonic method, and a decrease in the density of the samples with an increase of the arylporphyrin content was shown. According to the results of the biological test, the dark toxicity of the obtained composites against the microorganisms Staphylococcus aureus, Salmonella Typhimurium and Escherichia coli was shown. Immobilizates containing 0.4 and 0.5 wt.% porphyrin showed the best antibacterial effect. The antibacterial activity of the studied composites makes it possible to attribute the polylactide-porphyrin systems to promising materials in the field of medicine and bioengineering.
RESUMO
The fibrous porous structure of polymers can mimic the extracellular matrix of the native tissue, therefore such polymers have a good potential for use in regenerative medicine. Organs and tissues within the body exhibit different mechanical properties depending on their functionality, thus artificial scaffolds should have mechanical behaviors similar to the extracellular matrix in conditions like living organisms, primarily in aqueous media. Several methods have been investigated in aquatic environments, including noninvasive techniques based on ultrasonic focused beams for biological objectives. In this study we explored the tensile behavior of poly(L-lactide) nonwoven polymer scaffolds using high-frequency ultrasound microscopy combined with a horizontal testing machine, which provided a visualization of the reorganization and transformation of the dynamic volume microstructure. The mechanisms of unwinding, elongation, orientation, and deformation of polymer fibers under uniaxial tension were revealed. We observed an association between the lined plastic deformation from 100 to 400% and the formation of multiple necks in the fibers, which caused stress relaxation and significant rarefaction of the fibrous microstructure. It was shown that both peaks on the stress-strain curve corresponded to the microstructure of aligned fibers in terms of initial diameter and thinning fibers. We discuss the possible influence of these microstructure transformations on cell behavior.
RESUMO
The monitoring of degradation processes' kinetics in polymers is one of the attractive possibilities of ultrasound technique applications that provide non-destructive imaging of polymers' internal microstructure and measurements of elastic properties. In this work, biodegradable polymers and copolymers based on L,L-lactide, D,L-lactide and ε-caprolactone have been studied at different stages of hydrolysis at 37⯰C by high-frequency (100 and 200 MHz) ultrasound. The acoustic microscopy technique has been developed to reveal changes in the internal microstructure and bulk sound speed in polymer samples over a hydrolysis period of 25 weeks. Ultrasound imaging provides visualization of amorphous and crystalline phases, internal imperfections, variation in packing density, and other microstructural features. Acoustic images demonstrate nucleation, growth, and the changes in internal inhomogeneities in polymers during degradation accompanied by a decrease in the polymers' molecular weight. We associate the changes in the elastic properties (the speed of a longitudinal wave) with crystallinity variations in polymers during hydrothermal aging. The results of the ultrasound investigations are supplemented by gel permeation chromatography, differential scanning calorimetry, and wide-angle X-ray spectroscopy. STATEMENT OF SIGNIFICANCE: Monitoring the kinetics of degradation processes in polymers is one of the attractive possibilities of applying ultrasound techniques that provide non-destructive imaging of the polymers' internal microstructure and measurements of elastic properties. In this work, visualization of nucleation, growth, and evolution of internal inhomogeneities in the volume of polymers and variation of values of speed of longitudinal and transverse sound waves during hydrolysis are compared with measurements of molecular weight, density, data of DSC curves, and X-ray scattering analysis. We discuss several common phenomena that occur in the volume of poly(L-lactide) and poly(D,L-lactide) over the degradation process as well as improvement of elastic properties of the poly(ε -caprolactone) and poly(L-lactide-co-caprolactone) during hydrothermal aging.
Assuntos
Poliésteres/química , Módulo de Elasticidade , Hidrólise , Teste de Materiais , Microscopia Acústica/métodosRESUMO
Development of artificial tissues or organs is one of the actual tasks in regenerative medicine that requires observation and evaluation of intact volume microstructure of tissue engineering products at all stages of their formation, from native donor tissues and decellularized scaffolds to recipient cell migration in the matrix. Unfortunately in practice, methods of vital noninvasive imaging of volume microstructure in matrixes are absent. In this work, we propose a new approach based on high-frequency acoustic microscopy for noninvasive evaluation and visualization of volume microstructure in tissue engineering products. The results present the ultrasound characterization of native rat diaphragms and lungs and their decellularized scaffolds. Verification of the method for visualization of tissue formation in the matrix volume was described in the model samples of diaphragm scaffolds with stepwise collagenization. Results demonstrate acoustic microscopic sensitivity to cell content concentration, variation in local density, and orientation of protein fibers in the volume, micron air inclusions, and other inhomogeneities of matrixes.
Assuntos
Diafragma/ultraestrutura , Matriz Extracelular/ultraestrutura , Pulmão/ultraestrutura , Microscopia Acústica/métodos , Alicerces Teciduais , Animais , Diafragma/química , Diafragma/citologia , Desenho de Equipamento , Matriz Extracelular/química , Pulmão/química , Pulmão/citologia , Masculino , Microscopia Acústica/instrumentação , Ratos , Ratos Wistar , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
AIM: The aim of the present work was to compare the elastic properties and internal structure of 4 different CAD/CAM chairside materials, by the method of Scanning Impulse Acoustic Microscopy (SIAM). METHODS: Four chairside CAD/CAM materials with different structures from hybrid ceramic (VITA Enamic, VITA Zahnfabrik), feldspatic ceramic (VITABlocs Mark II, VITA Zahnfabrik), leucite glass-ceramic (IPS Empress CAD, Ivoclar Vivadent) and PMMA (Telio CAD, Ivoclar Vivadent) were examined by Scanning Impulse Acoustic Microscope (SIAM). RESULTS: The results of micromorphological research of CAD/CAM chairside materials using SIAM method showed differences between the internal structures of these materials. The internal structure of feldspatic and glass-ceramic samples revealed the presence of pores with different sizes, from 10 to 100 microns; the structure of polymer materials rendered some isolated defects, while in the structure of hybrid material, defects were not found. CONCLUSION: Based on the results obtained from the present study, in cases of chairside production of dental crowns, it would be advisable to give preference to the blocks of hybrid ceramics. Such ceramics devoid of quite large porosity, glazing for CAD/CAM crowns made from leucite glass-ceramic and feldspatic ceramic may be an option. For these purposes, commercially available special muffle furnace for clinical and laboratory individualization and glazing of ceramic prostheses were provided. Further studies are needed to confirm the evidence emerging from the present research.