RESUMO
Purpose: The purpose of this study was to investigate the microleakage of atraumatic glass ionomer restorations with and without silver diammine fluoride (SDF) application. Restorations with SDF are termed silver-modified atraumatic restorations (SMART). Methods: Sixty carious extracted permanent teeth were randomly allocated to two SMART groups and two control groups (n equals 15 per group) for a total of four groups. After selective caries removal, test specimens were treated with 38 percent SDF and polyacrylic acid conditioner was applied and rinsed; teeth were restored with Fuji IX GP® glass ionomer (n equals 15) or with SMART Advantage™ glass ionomer (SAGI; n equals 15). For control groups, specimens were restored with their respective GI material after selective caries removal, both without SDF. Restored teeth were placed in Dulbecco's Phosphate-Buffered Saline solution at 37 degrees Celsius for 24 hours. Teeth were thermocycled between five and 55 degrees Celsius for 1,000 cycles, stained with two percent basic fuchsin, sectioned, and visually inspected for microleakage utilizing stereomicroscopy on a four-point scale. Data were statistically analyzed using Kruskal-Wallis one-way analysis of variance on ranks using Dunn's method (P<0.05). Results: Microleakage between the two SMART restoration groups was insignificant. SAGI alone demonstrated significantly more microleakage than all other groups. There was no statistical significance between the Fuji IX GP® control group and the two SMART restoration groups. Conclusions: This in vitro study indicated that silver diammine fluoride placed before glass ionomer restoration does not increase microleakage. Polyacrylic acid may be used after SDF placement without increasing microleakage.
Assuntos
Tratamento Dentário Restaurador sem Trauma , Cárie Dentária , Infiltração Dentária , Fluoretos Tópicos , Cimentos de Ionômeros de Vidro , Compostos de Prata , Infiltração Dentária/prevenção & controle , Humanos , Compostos de Prata/química , Cimentos de Ionômeros de Vidro/química , Tratamento Dentário Restaurador sem Trauma/métodos , Fluoretos Tópicos/química , Cárie Dentária/prevenção & controle , Cariostáticos/química , Compostos de Amônio Quaternário/química , Viscosidade , Resinas Acrílicas/química , Restauração Dentária Permanente/métodosRESUMO
BACKGROUND: Cobalt-chromium-molybdenum (CoCrMo) and titanium alloys have been used for orthopaedic implants for decades. However, recent evidence has shown that inflammatory cell-induced corrosion (ICIC) can damage these metal alloys. This study aimed to investigate the mechanisms of ICIC by coculturing macrophages with lymphocytes. We hypothesized that macrophages would be able to alter the surface oxide layer of CoCrMo and titanium alloy (Ti6Al4V) disks, with greater oxide layer damage occurring in groups with a coculture compared to a macrophage monoculture and in groups with inflammatory activators compared to nonactivated groups. METHODS: Murine macrophages were cultured on American Society for Testing and Materials F1537 CoCrMo and F136 Ti6Al4V disks for 30 days and activated with interferon gamma and lipopolysaccharide. Interferon gamma and lipopolysaccharide were added to the culture medium to simulate local inflammation. Macrophages were either cultured alone or in a coculture with T helper lymphocytes. After the 30-day experiment, scanning electron microscopy was used to examine the disk surfaces, and oxide levels were found using energy dispersive x-ray spectroscopy. RESULTS: Pitting features consistent with previous reports of ICIC were found on disks cultured with cells. Both CoCrMo and Ti6Al4V disks had significantly lower oxide levels in all groups with cells compared to control groups with no cells (P < .01). Additionally, CoCrMo disks had significantly lower oxide levels when cultured with activated macrophages and lymphocytes compared to nonactivated macrophages alone (P < .001), activated macrophages alone (P < .01), and nonactivated macrophages and lymphocytes (P < .05). No differences in the oxide levels were found among the Ti6Al4V groups. CONCLUSIONS: This study demonstrates the ability of macrophages to alter the surface chemistry of commonly used orthopaedic alloys. We found that the addition of lymphocytes and a simulated local inflammatory response may contribute to the ICIC of CoCrMo implants.
Assuntos
Ligas , Técnicas de Cocultura , Macrófagos , Titânio , Macrófagos/efeitos dos fármacos , Animais , Titânio/toxicidade , Camundongos , Corrosão , Vitálio , Teste de Materiais , Inflamação , Linfócitos/efeitos dos fármacos , Células Cultivadas , Cobalto/toxicidadeRESUMO
STATEMENT OF PROBLEM: New denture base acrylic resins have been introduced that are specifically formulated for microwave polymerization. Microwave polymerization is a time-efficient procedure, but few studies have evaluated how these new acrylic resin formulations compare with conventionally processed acrylic resins. PURPOSE: The purpose of this in vitro study was to compare the stiffness and strength of denture base acrylic resins formulated for microwave polymerization with conventionally processed acrylic resin. MATERIAL AND METHODS: Rectangular beams were fabricated from 2 microwave-polymerized denture base acrylic resins, microwave-specific resin (Nature-Cryl MC), resin with the option of microwave polymerization (Diamond D), and a conventionally processed resin as a control (Lucitone 199). Specimens (n=10) were stored in water for 1 week and subjected to a 3-point bend test to determine the flexural modulus (stiffness) and flexural strength before (initial properties) or after 120 000 load cycles. The load cycles, conducted between 5 and 25 N at 2 Hz, simulated 6 months of mastication. Data were analyzed by using 2-way ANOVA, followed by pairwise comparisons (α=.05). RESULTS: The initial flexural modulus (mean ±standard deviation) was conventionally processed resin, 2.65 ±0.33 GPa; microwave-specific resin, 3.01 ±0.20 GPa; and microwave-option resin, 2.63 ±0.04 GPa. After load cycling, the mean flexural modulus was conventionally processed resin, 2.34 ±0.32 GPa; microwave-specific resin, 2.69 ±0.20 GPa; and microwave-option resin, 1.96 ±0.11 GPa. The initial flexural strength was conventionally processed resin, 77.6 ±11.0 MPa; microwave-specific resin, 83.6 ±3.5 MPa; and microwave-option resin, 78.9 ±2.6 MPa. After load cycling, the mean flexural strength was conventionally processed resin, 68.7 ±9.0 MPa; microwave-specific resin, 73.3 ±3.3 MPa; and microwave-option resin, 65.5 ±3.5 MPa. Resin and loading state significantly affected the stiffness and strength (P<.01); the interaction resin×state was not significant (P≥.558). CONCLUSIONS: Microwave-polymerized denture base acrylic resins were comparable in stiffness and strength with conventionally processed acrylic resin. All acrylic resins decreased in stiffness and strength after load cycling. The microwave-specific resin was significantly stiffer and stronger than the other denture base acrylic resins, initially and after 120 000 load cycles.
Assuntos
Resinas Acrílicas , Bases de Dentadura , Teste de Materiais , Micro-Ondas , Polimerização , Resinas Acrílicas/química , Resistência à Flexão , Análise do Estresse Dentário , Materiais Dentários/química , Materiais Dentários/efeitos da radiação , Módulo de Elasticidade , Técnicas In VitroRESUMO
PURPOSE: To evaluate flow profile and non-Newtonian behavior of 10 different silicone lining materials. METHODS: Ten commercially available silicone lining materials were selected for evaluation. The flow profile and non-Newtonian behavior of each material was measured using a shark fin testing method. Fin height and resultant base thickness were measured with a digital caliper and compared with one-way ANOVA and Student-Newman-Keuls post hoc test and fin base by Kruskal-Wallis one-way ANOVA on ranks with Dunn post hoc test with significance at P< 0.05 for both. RESULTS: Shark fin heights ranged from 9.62 ± 0.86 mm [Reline II (Soft)] to 25.54 ± 0.43 mm [Sofreliner (Medium)]. Shark fin bases ranged from 2.57 ± 0.51 mm [Sofreliner (Medium)] to 10.31 ± 0.57 mm [Reline II (Soft)]. Statistically significant differences were found between certain samples' shark fin heights as well as resultant bases (P< 0.05) indicating different rheological properties. CLINICAL SIGNIFICANCE: Silicone liner materials differ significantly with respect to flow profile and non-Newtonian behavior. While a high flow profile (low viscosity) of an elastomeric impression material improves accuracy, it may be a detriment to a denture lining material that must achieve a critical minimum thickness to provide resilience. Likewise, a low flow profile (high viscosity) material may also pose a disadvantage, requiring excessive compression and possible tissue distortion to achieve the same critical thickness. The results of this study should be considered when selecting the appropriate material for clinical application. Additional studies are indicated to further quantify rheological properties as well as correlate them to physical properties after the complete cure of the material.
Assuntos
Reembasadores de Dentadura , Silicones , Humanos , Viscosidade , Teste de Materiais , Bases de Dentadura , Elastômeros de Silicone , Propriedades de SuperfícieRESUMO
PURPOSE: To compare the microhardness values and bottom/top hardness ratios of different composites after being cured in 2 or 4 mm increments. METHODS: Two bulk fill composites, methacrylate-based and ormocer-based, and one conventional composite were tested. 36 cylindrical discs were prepared (n=12/composite, with six for 2 mm, and six for 4 mm thickness) by pressing each composite into a mold between two glass slides covered by Mylar strips. The top and bottom surfaces of each sample were evaluated using a Buehler hardness tester for Knoop microhardness, with a 50 g static load applied for 10 seconds at three different locations of the central part of each sample. The bottom/top hardness ratio was calculated for each sample. The Knoop microhardness data and bottom/top ratio percentages were analyzed using two-way repeated measures ANOVA and Holm-Sidak post hoc test, with significance at P< 0.05. RESULTS: The tested methacrylate-based bulk fill had the highest overall microhardness among the three tested composites. All three composite types showed a significant difference in microhardness between the top and bottom of the 4 mm discs. The bottom/top ratio percentages differed significantly for both tested bulk fill composites across different thicknesses. Both tested bulk fill materials had a bottom/top ratio of ≥ 80% at the deepest level of a 4 mm increment. CLINICAL SIGNIFICANCE: The type of material significantly affected both the bottom and top microhardness values under the experimental conditions used. While both tested bulk fill composites showed a decline in microhardness at the bottom of the 4 mm depth, they had clinically acceptable microhardness ratios at greater depths.
Assuntos
Resinas Compostas , Metacrilatos , Teste de Materiais , Polimerização , Propriedades de Superfície , DurezaRESUMO
PURPOSE: To evaluate and compare the effects of different scaling and polishing techniques on the surface roughness of four different restorative materials. METHODS: 72 specimens were prepared, molded to a size of 8.0 by 2.0 mm, and cured according to the manufacturers' instructions. The specimens were stored at 37°C for 24 hours and then thermocycled for 5,000 cycles (from 55°C to 5°C) to simulate 6 months of clinical use. Surface roughness (Ra/average and Rz/max-overall heights) was calculated using a stylus profilometer by subtracting the simulated treatments of hand scaling, ultrasonic scaling, and air polishing from the baseline measurements. The difference in Ra and Rz data were compared independently for each measurement using a two-way ANOVA on Ranks and the Holm-Sidak test, with α< 0.05 used to determine significance. RESULTS: Irrespective of the scaling or polishing technique employed, flowable bulk fill demonstrated the lowest Ra and Rz values. Hand scaling exhibited the highest roughness and variability among the other techniques, regardless of the materials tested (P< 0.001). Air polishing with glycine resulted in the lowest roughness values across all tested materials, with the exception of the tested bioactive restorative material group. CLINICAL SIGNIFICANCE: Regarding surface roughness, air polishing with glycine may be an effective and safe intervention for periodontal maintenance of subgingival restorations compared to the other tested scaling methods.
Assuntos
Materiais Dentários , Raspagem Dentária , Análise de Variância , Glicina , UltrassomRESUMO
Objectives: This study aimed to evaluate the effect of aging on the marginal quality of glass hybrid (GH) material used to elevate dentin gingival margins, and to analyze the consistency of the results obtained by 3 in vitro methods. Materials and Methods: Ten teeth received compound class II cavities with subgingival margins. The dentin gingival margins were elevated with GH, followed by resin composite. The GH/gingival dentin interfaces were examined through digital microscopy, scanning electron microscopy (SEM) using resin replicas, and according to the World Dental Federation (FDI) criteria. After initial evaluations, all teeth were subjected to 10,000 thermal cycles, followed by repeating the same marginal evaluations and energy dispersive spectroscopy (EDS) analysis for the interfacial zone of 2 specimens. Marginal quality was expressed as the percentage of continuous margin at ×200 for microscopic techniques and as the frequency of each score for FDI ranking. Data were analyzed using the paired sample t-test, Wilcoxon signed-rank test, and Pearson and Spearmen correlation coefficients. Results: None of the testing techniques proved the significance of the aging factor. Moderate and strong significant correlations were found between the testing techniques. The EDS results suggested the presence of an ion-exchange layer along the GH/gingival dentin interface of aged specimens. Conclusions: The marginal quality of the GH/dentin gingival interface defied aging by thermocycling. The replica SEM and FDI ranking results had stronger correlations with each other than either showed with the digital microscopy results.
RESUMO
PURPOSE: Metal particles found in tissues around dental implants have been proposed to play a pathogenic role in peri-implantitis. Ultrasonic scaling has been suggested as a mechanism by which these particles can be inadvertently released into surrounding tissues. Furthermore, risk factors like diabetes can result in exacerbation of this inflammatory condition. The current study aimed to analyze metal particles released from titanium surfaces during ultrasonic scaling and their impact on pro-inflammatory cytokine production by human gingival fibroblasts. METHODS: Metal particles generated from ultrasonic scaling of titanium discs using two different tips (metal and poly-etheretherketone tips) were characterized using scanning electron microscopy and elemental analysis. Endotoxin levels and Human gingival fibroblast viability, in the presence commercial and ultrasonically generated particles were determined. Fibroblasts, cultured in high or low glucose growth medium, were incubated with commercial titanium particles or ultrasonically generated particles in the presence or absence of interluekin-1ß. Interleukin 6 and interleukin 8 production were then quantified using Enzyme linked immunosorbent assay. RESULTS: Analysis of particles after scaling of titanium discs showed significant levels of titanium particles. Commercial titanium particles and generated particles had no effect of fibroblast viability. Endotoxin levels of all particles were too low to stimulate HGF cells. IL-1ß significantly stimulated IL-6 and IL-8 production. However, commercial, and generated particles generally had no significant effect on IL- 6 and IL-8 production. CONCLUSION: Our study concluded that particles generated during ultrasonic scaling had no significant effect on viability of HGF cells and cytokine production.
Assuntos
Implantes Dentários , Titânio , Humanos , Titânio/efeitos adversos , Ultrassom , Interleucina-8/farmacologia , Fibroblastos , Metais , Endotoxinas/farmacologia , Propriedades de Superfície , Células Cultivadas , Implantes Dentários/efeitos adversosRESUMO
Purpose: The purpose of this study was to evaluate the surface roughness of three different brands of prefabricated pediatric zirconia crowns (ZRCs) following simulated toothbrushing with a variety of dentifrices. Methods: Ninety-six total maxillary right central incisor prefabricated pediatric ZRCs (n equals 32 ZRCs/brand) were obtained from the manufacturers: Kinder Krowns®, NuSmile®, and Sprig®. ZRCs were equally assigned to dentifrices (n equals eight/dentifrice) with a variety of Relative Dentin Abrasion (RDA) values: Tom's of Maine Children's; Crest Kid's; Prevident 5000; and Crest® Pro-Health. ZRCs were brushed 10,000 strokes with a V-8 Toothbrushing Machine using the assigned dentifrices. Pre- and post-intervention data for the surface roughness of ZRCs, represented in Ra (average roughness) and Rz (mean roughness depth), were obtained using a stylus profilometer. Data were analyzed independently using two-way repeated measures analysis of variance with the Holm- Sidak method (α equals 0.05). Results: Baseline versus brushed Ra Kinder Krowns® with Prevident and Sprig® with Crest Kid's indicated statistically significant differences. Sprig® versus NuSmile® utilizing Crest Kid's were different in change in roughness. Both baseline and brushed NuSmile® dentifrice options were different versus all Sprig® and Kinder® ZRCs. Conclusions: Despite statistical significance, changes in surface roughness were small in scale. Although this study did not address toothbrushing and different dentifrices may affect the mechanical properties, durability, and/or retention properties of ZRCs, the study's results provide confidence to clinicians when using prefabricated pediatric ZRCs as a sustainable treatment option along with other restorative options, such as strip crowns and stainless steel crowns.
Assuntos
Dentifrícios , Escovação Dentária , Humanos , Criança , Escovação Dentária/métodos , Propriedades de Superfície , CoroasRESUMO
PURPOSE: To evaluate the laboratory long-term effect of various whitening dentifrices on the surface roughness of two brands of resin composite (TPH ST, Filtek Bulk Fill One) using a mechanical toothbrushing simulation. METHODS: Thirty-two samples each of Filtek and TPH were fabricated in ring molds 10 x 1 mm. Samples were randomly grouped (n=8; four groups), according to dentifrice used; Crest 3D, Optic White, Hello (charcoal), and Aim as control. Samples were brushed in mixed solutions containing deionized water and dentifrice at 150 gf for 10,000x with rotation to ensure uniform brushing. Surface roughness was measured both before (baseline) and after the mechanical toothbrushing simulation using a stylus profilometer. Data collected was compared independently for each treatment using two-way ANOVA and SNK with α< 0.05 for significance. RESULTS: The data showed that TPH was more susceptible to the abrasive nature of three of the whitening dentifrices tested [Crest 3D, Optic White, and Hello (charcoal) ]. Filtek also exhibited significant susceptibility to the abrasive nature of Hello. Aim showed the least or minimal amount of abrasion. CLINICAL SIGNIFICANCE: TPH ST composite was more susceptible to the abrasive nature of the three whitening dentifrices tested [Crest 3D, Optic White, and Hello (charcoal)]. Filtek also exhibited significant susceptibility to the abrasive nature of Hello. Aside from the data supporting the clinical efficacy of TPH compared to Filtek, clinicians should inform patients of the abrasive capacity of all whitening dentifrices, especially those that are charcoal based.
Assuntos
Dentifrícios , Carvão Vegetal , Humanos , Propriedades de Superfície , Escovação DentáriaRESUMO
BACKGROUND: Patients have received cobalt-chromium-molybdenum (CoCrMo) implants for their joint replacement for decades. There have been reports of inflammatory cell-induced corrosion (ICIC) of these implants from retrieval studies. The goal of this study is to see if we could recreate ICIC in vitro and whether electrocautery damage to alloy surfaces may hasten this process. METHODS: Murine macrophages were cultured on CoCr disks with and without damage from a monopolar electrocautery. Culture medium was replaced every 12 hours and supernatant was collected every 4 days. After 30 days, cells were removed, counted, and digested. The metal concentrations in the supernatant and within cells were assessed using inductively coupled plasma spectrometry for comparison. RESULTS: The Co supernatant concentration was higher in the undamaged disks with activated macrophages. Higher concentrations of Co and Mo were found in the supernatant of the undamaged disks vs the electrocautery (EC) corrosion damaged disks. There was a significantly higher intracellular Co and Mo concentration with activated cells on CoCrMo disks vs the control group and no difference compared to EC damaged disk group. Scanning electron microscopy displayed microscopic pitting on the surfaces exposed to macrophages without EC damage. CONCLUSION: We found that macrophages could reproduce findings of ICIC pits on the surface of CoCrMo alloy and that the addition of EC damage to the surface did not increase the process. The clinical significance of these findings should be further investigated to determine if this could explain a small number of poor total knee arthroplasty reported outcomes.
Assuntos
Artroplastia do Joelho , Vitálio , Ligas , Animais , Cromo , Cobalto/química , Corrosão , Humanos , Macrófagos , CamundongosRESUMO
PURPOSE: To investigate the potential of adding silver-nanoparticle-containing amorphous calcium phosphate microparticles as bioactive fillers into commercially available nonbioactive dental resin cement. MATERIALS AND METHODS: Experimental cement was formulated by adding 7.5% silver-nanoparticle-containing amorphous calcium phosphate microparticles to Multilink Automix resin cement (Ivoclar Vivadent). The experimental cement was evaluated for shear bond strength (N = 11 per group) and demineralization/remineralization (N = 16 per group), with BioCem® Universal BioActive cement (NuSmile) as the positive control and Multilink Automix cement as the negative control. One-way analysis of variance and post hoc tests were used to assess the significance of differences among or between the groups RESULTS: The addition of silver-nanoparticle-containing amorphous calcium phosphate microparticles at the level of 7.5% by weight into Multilink Automix did not have a statistically significant effect on the shear bond strength (p > 0.05), but statistically significantly increased the depth of remineralization on both dentin and enamel (p = 0.01 and p < 0.001, respectively) when compared to Multilink Automix alone. The experimental cement prepared in the present study was comparable to BioCem® on the depths of remineralization on both dentin and enamel (p = 0.59 and p = 0.99, respectively). CONCLUSION: When incorporated into nonbioactive commercial dental resin cements as bioactive fillers at the level of 7.5% by weight, silver-nanoparticle-containing amorphous calcium phosphate microparticles could provide remineralization potential without affecting the shear bond strength.
Assuntos
Colagem Dentária , Cimentos de Resina , Cimentos de Resina/uso terapêutico , Cimentos de Resina/química , Cimentos Dentários/uso terapêutico , Cimentos Dentários/química , Prata/farmacologia , Prata/uso terapêutico , Teste de Materiais , Cimentos de Ionômeros de Vidro , Materiais Dentários , Resistência ao Cisalhamento , Propriedades de Superfície , Análise do Estresse DentárioRESUMO
PURPOSE: To evaluate color and gloss changes of three different resin composites after staining and whitening. METHODS: 57 disc-shaped composite samples were made for each of three resin composite materials [Activa BioActive Restorative (Activa), Filtek Supreme (Filtek), and TPH Spectra (TPH)], producing 19 samples per composite (n=19). Each group of resin samples was divided among four solutions: red wine, coffee, tea, and water (control), producing six samples per staining group (n=6) and one control (n=1). Samples were stained for 40 days for 3 hours/day at room temperature. When not undergoing staining/whitening, samples were stored in DI water at 37°C. Measurements were obtained for color and gloss before staining, after staining, and after whitening. Illuminant source specular component excluded (SCE) and included (SCI), with both CIE L*a*b* and CIE 2000 L*C*h* systems, were obtained with colorimetric measurements. The standard ΔE (total color change) = 3.3 was used as a clinically acceptable value. Stained groups were divided into two groups (n= 9 each) for each whitening product: Opalescence Boost and Opalescence PF. Both were applied according to manufacturer's instructions. RESULTS: Staining of all samples consistently showed decreased lightness. Filtek showed the most colorimetric changes, especially with wine, while TPH and Activa composites showed few changes; most changes were with tea. Whitening altogether showed generalized increased lightness. All Activa specimens returned to clinically acceptable levels, but the other two materials tested varied. Gloss was most affected for TPH, followed by Filtek; and gloss improved with Activa groups. Overall, Filtek's color varied most, with Activa and TPH being less. All Activa groups returned to clinically acceptable values. However, multiple TPH and Filtek groups had ΔE> 3.3. Furthermore, TPH had the most gloss changes. Activa composites appeared the most stable under the conditions of this study. CLINICAL SIGNIFICANCE: Clinicians should be aware that resin composites can undergo staining from a variety of sources. Some resin composites can return to their original esthetic appearance after using bleaching agents. In addition, staining beverages can affect the gloss of the resin composite.
Assuntos
Café , Água , Cor , Coloração e RotulagemRESUMO
INTRODUCTION/OBJECTIVE: The tailored amorphous multi-porous (TAMP) material fabrication technology has led to a new class of bioactive materials possessing versatile characteristics. It has not been tested for dental applications. Thus, we aimed to assess its biocompatibility and ability to regenerate dental mineral tissue. METHODS: 30CaO-70SiO2 model TAMP discs were fabricated by a sol-gel method followed by in vitro biocompatibility testing with isolated human or mini-swine dental pulp stem cells (DPSCs). TAMP scaffolds were tested in vivo as a pulp exposure (pin-point, 1 mm, 2 mm, and entire pulp chamber roof) capping material in the molar teeth of mini-swine. RESULTS: The in vitro assays showed that DPSCs attached well onto the TAMP discs with comparable viability to those attached to culture plates. Pulp capping tests on mini-swine showed that after 4.5 months TAMP material was still present at the capping site, and mineral tissue (dentin bridge) had formed in all sizes of pulp exposure underneath the TAMP material. CONCLUSIONS: TAMP calcium silicate is biocompatible with both human and swine DPSCs in vitro and with pulp in vivo, it may help regenerate the dentin bridge after pulp exposure.
Assuntos
Capeamento da Polpa Dentária , Endodontia Regenerativa , Animais , Compostos de Cálcio , Polpa Dentária , Silicatos , SuínosRESUMO
Purpose: Since pediatric zirconia crowns (ZRCs) are prefabricated, they may be sterilized following try-in for re-use. Possible changes in color stability, gloss, and translucency were evaluated for four brands of prefabricated zirconia crowns following autoclave and cold sterilization. Methods: Sixteen maxillary right central incisor prefabricated ZRCs were obtained from NuSmile ®, Sprig, Cheng Crowns, and Kinder Krowns ® manufacturers and either autoclaved or cold sterilized. Gloss unit measurements were obtained with a small object Novo-Curve glossmeter. CIE-L*a*b* system values were measured with a CM-700d spectrophotometer under three different illuminants to calculate DE (quantitative representation of the perceived color). ΔE equals one was used for perceptibility threshold (PT) and ΔE equals 2.7 for acceptability threshold (AT). Results: All groups' baseline was ΔE less than one for all illuminants except Cheng Crowns to be autoclaved, indicating crowns are not identical in color from the manufacturer. For autoclaving, Cheng Crowns reached ΔE PT greater than one following the 10th sterilization cycle for all illuminants (D65 1.08±0.32 (standard deviation; P<0.001), A equals 1.07±0.32 (P<0.001), and F2 equals 1.25±0.38 (P<0.001). For cold sterilization, Sprig EZCrowns reached PT greater than one for all sterilization cycles, and Cheng Crowns reached ΔE PT greater than one for the sixth and 10th sterilization cycles. Gloss was not affected by either sterilization method. Spring EZcrowns had the highest mean translucency. Conclusions: Although each group may have a slight perceived difference, there was no clinically significant difference in color; all groups remained below the acceptability threshold of ΔE equals 2.7.
Assuntos
Planejamento de Prótese Dentária , Zircônio , Criança , Cor , Coroas , Humanos , EsterilizaçãoRESUMO
BACKGROUND: Pitting damage on implants has been reported and attributed to the use of electrocautery. This study aimed to determine how different total knee arthroplasty bearing surfaces are susceptible to this type of damage and whether surgeons are aware that this damage can occur. METHODS: A survey was sent to Hip and Knee Society members to determine what percentage of adult reconstructive surgeons use electrocautery after implantation of components. Three bearing surfaces for total knee arthroplasty were selected: cobalt chromium, Oxinium, and zirconium nitride to be damaged by electrocautery with a monopolar (MP) and bipolar (BP) electrocautery with 3 different energy settings. A comparison of surface damage using scanning electron microscopy and elemental differences using energy dispersion spectroscopy was performed. Average roughness (Ra), maximal peak-to-valley height (Rz), kurtosis (Rk), and skewness (Rsk) were recorded for comparison using a profilometer was performed. RESULTS: Median Rz and Ra measurements were larger for BP damaged areas compared to MP for all bearing surfaces. The Oxinium surface had the greatest increase in roughness parameters. Survey results indicate that a significant percentage of adult reconstructive surgeons use the electrocautery after implants are in place and are not aware of this type of damage. Backscatter scanning electron microscopy analysis found significant changes for BP damage compared to MP. CONCLUSION: Surface damage caused by electrocautery can have significant effects on the bearing surfaces of implants but further study needs to be performed to determine if this is a clinical issue. Our survey determined that many arthroplasty experts are unaware that this damage can occur.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Adulto , Artroplastia do Joelho/efeitos adversos , Ligas de Cromo , Eletrocoagulação/efeitos adversos , Humanos , Articulação do Joelho/cirurgia , Prótese do Joelho/efeitos adversos , Desenho de PróteseRESUMO
Collagen membranes have been used as bioresorbable barrier membranes in guided tissue/bone regeneration. However, the collagen membranes currently used in clinics lack an active antibacterial function, although infection at surgical sites presents a realistic challenge for guided tissue/bone regeneration. In this study, we successfully prepared novel and advanced collagen composite membranes from collagen and complexes of heparin and chelates of minocycline and Ca2+ ions. These membranes were characterized for chemical structures, morphology, elemental compositions and tensile strength. In vitro release studies were conducted to evaluate the release kinetics of minocycline from these membranes. Agar disk diffusion assays were used to assess their sustained antibacterial capability against model pathogenic bacteria Staphylococcus aureus. The chemical and physical characterization confirmed the successful synthesis of minocycline-loaded collagen composite membranes, namely NCCM-1 and NCCM-2. Both membranes had weaker tensile strength as compared with commercial collagen membranes. They achieved sustained release of minocycline for at least 4 weeks in simulated body fluid (pH 7.4) at 37°C. Moreover, both membranes demonstrated potent sustained antibacterial effects against Staphylococcus aureus. These results suggested that the advanced collagen composite membranes containing minocycline can be exploited as novel guided tissue regeneration membranes or wound dressing by providing additional antibacterial functions.
Assuntos
Antibacterianos , Minociclina , Antibacterianos/farmacologia , Bandagens , Colágeno , Membranas Artificiais , Minociclina/farmacologia , Staphylococcus aureusRESUMO
Low-viscosity polymer resins, or surface sealants (SSs), have been utilized as a means of finalizing the polishing step following the placement of composite resin restorations. The aim of this study was to measure the surface roughness (Ra) of composite resins treated with different SSs before and after exposure to an accelerated artificial aging protocol. The study included 5 experimental groups of composite resin discs (TPH Spectra ST) treated with different SSs (PermaSeal, Embrace WetBond Seal-n-Shine, OptiGuard, BisCover LV, and DuraFinish) and a control group consisting of untreated discs (n = 6 per group). The discs were prepared by inserting composite resin in 10 × 1-mm rings, covering the ring and material with a transparent strip, compressing the assembly between glass slides, and polymerizing through the slides on each side for 40 seconds with an LED curing light. Each disc except for the control specimens received a coating of the selected SS followed by application of a transparent matrix strip and then light polymerization for 20 seconds using an LED light source. Surface roughness measurements were obtained with a digital contact profilometer at baseline (immediately after polymerization) and following exposure to a thermocycling regimen to simulate aging. The data were analyzed using 2-way analysis of variance and post hoc Student-Newman-Keuls test with significance set at P < 0.05. There were no statistically significant differences among the groups at baseline. There were no statistically significant differences between the baseline and post-thermocycling Ra measurements except among the DuraFinish specimens, which were significantly rougher than all other groups after accelerated artificial aging. The use of SSs for the initial insertion and possibly for the long-term maintenance of composite resins could be minimally beneficial for restoration maintenance if a transparent covering medium is utilized during polymerization. However, due to the effects caused by formation of an oxygen-inhibited layer of unpolymerized monomers if a covering medium is not used, the results suggest the benefits do not offset the costs considering both gloss and Ra surface-testing parameters.
Assuntos
Resinas Compostas , Polimento Dentário , Humanos , Teste de Materiais , Propriedades de SuperfícieRESUMO
PURPOSE: To evaluate marginal seal, adaptation, surface texture, and bubble presence of pit and fissure sealants when using a novel instrument (C-Shape It) or the manufacturers' supplied applicators for sealant placement into occlusal fissures. METHODS: Extracted molars with occlusal fissures were cleaned with pumice slurry and divided into six groups (n= 10/gp); three treatment and three control. Sealant materials placed included Ultraseal, Delton, and Helioseal. Excess water was removed per manufacturers' instructions. Sealants were applied with each applicator and with the C-Shape It to each group from cusp to cusp without covering marginal ridges, and the polymerization guidelines for photocuring were followed for all the groups. Samples were thermocycled at 500x between 5° and 55°C. Teeth were sectioned in a buccolingual direction with a minimum of four sections per tooth and examined under a light microscope at 50x and scored. RESULTS: Marginal seal, adaptation, penetration ability, surface texture, bubble formation and location of the sealants were analyzed using two-way ANOVA on ranks with a 95% confidence interval. The C-Shape It instrument showed consistently smoother surface texture (P< 0.001), which was statistically significant versus all manufacturers' applicators for all materials. Bubble presence was statistically significantly less with the instrument C-Shape It versus the manufacturers' applicators for all materials (P< 0.001). Results also revealed significant differences in marginal sealant adaptation. CLINICAL SIGNIFICANCE: C-Shape It demonstrated consistent ability to reduce bubbles and improve surface texture and adaptation in occlusal fissures for all pit and fissure products tested.
Assuntos
Infiltração Dentária , Selantes de Fossas e Fissuras , Bis-Fenol A-Glicidil Metacrilato , Dente MolarRESUMO
This study evaluated how exposure to ultraviolet (UV) light affected the gloss of composite resins following application of resin-based surface sealants (SSs). Thirty composite resin discs were fabricated using cylindrical molds and randomly assigned to 1 of 5 SS groups (n = 6 each). Both sides of each disc received a polyester film clear matrix surface finish, and then rotary finishing and polishing procedures were performed on 1 side only. Six baseline measurements for each disc surface were performed using a 60-degree-angle gloss meter. The finished and polished side then received an SS application and was polymerized with an LED light through a polyester film matrix. Gloss measurements were then obtained. All specimens were then exposed to an artificial UV light source for a total of 382 hours, after which final gloss measurements were made. A 2-way repeated-measures analysis of variance and Student-Newman-Keuls pairwise multiple comparison tests revealed statistically significant differences between the SS materials and surface treatments (P < 0.05). No statistically significant (P > 0.05) differences were found between the surfaces that were mechanically finished and polished and those that only received a polyester film finish. However, all specimens exhibited significantly (P < 0.0001) higher gloss readings after SS application. Following UV exposure, all SS specimens exhibited significantly (P < 0.0001) lower gloss readings. The study results suggest that application of SSs to composite resin discs increases the gloss on a short-term basis; however, long-term exposure of SSs to an artificial UV light source might have a negative effect on the surface properties. Thus, dentists need to periodically evaluate composite resin restorations.