Prevalence and factors influencing bullying among Egyptian schoolchildren.

OBJECTIVE: To evaluate the prevalence of bullying among schoolchildren and to study the correlation between bullying and a specific type of malocclusion, self-esteem, oral health-related quality of life (OHRQoL), the need for orthodontic treatment and socioeconomic status. DESIGN: A cross-sectional study. SETTING: Low, middle and high socioeconomic-class schools in the same educational district in Cairo, Egypt. PARTICIPANTS: A total of 324 Egyptian schoolchildren aged 11-14 years. METHODS: Validated questionnaires were used to assess self-reported bullying frequency and intensity, self-esteem and OHRQoL. The Index of Orthodontic Treatment Need (IOTN) was used to assess the orthodontic treatment need and the participants' occlusion was classified according to the British Standard Incisors (BSI) classification. RESULTS: Bullying was found to be prevalent in 61.7% of the sample. Regression analysis revealed that participants with a Class II division 1 incisor relationship had the highest odds ratio (OR) for predicting bullying (OR = 1.86, 95% confidence interval [CI] = 1.38-2.15). Being bullied was significantly associated with lower self-esteem (OR = 0.47, 95% CI = 0.13-0.78), worse OHRQoL (OR = 2.73, 95% CI = 1.95-3.15) and a high need for orthodontic treatment, as determined by the IOTN Dental Health Component score (OR = 1.33, 95% CI = 1.05-1.95) and IOTN Aesthetic Component score (OR = 1.52, 95% CI = 1.12-1.88). Moreover, participants in high and middle socioeconomic-class groups had a lower OR for predicting bullying than those in the low socioeconomic-class group (OR = 0.27, 95% CI = 0.13-0.54). CONCLUSION: The bullying prevalence among Egyptian schoolchildren aged 11-14 years was very high. The prevalence of bullying was higher in schoolchildren with higher orthodontic treatment need and Class II division 1 incisor relationship. Bullying was correlated to poor self-esteem as well as poor OHRQoL. In addition, low socioeconomic status was found to be a potential predictor for bullying.

Digitization and validation of the open bite checklist manifesto: a step toward artificial intelligence.

OBJECTIVES: To introduce and validate newly designed computer software to aid in the diagnosis of anterior open bite (AOB). MATERIALS AND METHODS: The software was constructed based on the algorithm of a standardized open bite checklist, which considered skeletal, dental, and soft tissue components, as well as smile characteristics. Feeding the software with this input yielded a digital form output (DFO) in the guise of a diagnostic report characterizing the AOB phenotype, contributing components, severity, associated problems, and functional factors. For validation, DFO was compared to a conventional form output (CFO), created in a standardized manner according to expert opinions. Agreement between the DFO and CFO in terms of AOB phenotype was the primary outcome, while the secondary outcome was the number of missing diagnostic components in either method. RESULTS: Percentage of agreement between CFO and DFO was 82.2%, with a kappa coefficient of 0.78, which is considered a good level of agreement. There was a statistically significant relationship between the number of missing diagnostic components in CFO and level of disagreement, which rendered the DFO more reliable. CONCLUSIONS: Newly constructed software represents an efficient and valid diagnostic tool for AOB and its contributing components. There was good agreement between CFO and DFO, with the latter being more comprehensive and reliable. The algorithm built in the software can be used as the basis for a future artificial intelligence model to aid in the diagnosis of AOB.

Implant-supported canine retraction using different reactivation intervals of elastomeric chains: A CBCT-based split-mouth randomized controlled trial.

INTRODUCTION: Orthodontists attempt to maximize treatment efficiency regarding time, tooth position and adverse effects. A new approach, not yet explored, is the activation frequency. OBJECTIVE: The aim of this split-mouth randomized controlled trial was to evaluate the effect of reactivation intervals on the efficiency of tooth movement. METHODS: Thirty eight patients having a Class I malocclusion with bimaxillary dentoalveolar protrusion or severe crowding, Class II with mandibular deficiency or Class III, requiring first premolar extraction and canine retraction were recruited. Elastomeric chains producing 150g were replaced every two, four, six or eight weeks. There were 36, 37, 36, and 36 quadrants randomly allocated to these groups, respectively. The canine retraction rate was the primary outcome. Canine tipping, rotation, and root resorption and pain were the secondary outcomes. Only the outcome assessors were blinded to group assignment. RESULTS: The average total movement for the 6 months was 5.14, 5.31, 2.79 and 3.85 mm for the two-week, four-week, six-week and eight-week reactivation intervals, respectively. Root resorption was significantly higher in the two-week and four-week groups. No adverse events were observed. CONCLUSION: The canine retraction rate, tipping, rotation and pain were similar in 2, 4, 6 and 8-week activation intervals groups. Longer reactivation intervals show less root resorption. The trial protocol was not pre-registered. The study was self-funded.

Skeletal maturation in different anteroposterior and vertical skeletal growth patterns in female subjects.

PURPOSE: The aim of the present work was to study the sequence of skeletal maturation in the various anteroposterior and vertical skeletal growth patterns and to detect whether differences existed between them. METHODS: Cephalograms of 861 growing and adolescent female patients were traced to categorize the subjects into 9 skeletal patterns. Each subject was assigned a skeletal maturational stage. Analysis of variance (ANOVA) followed by Bonferroni test were used to detect differences in the onset of the three growth stages (prepubertal, pubertal and postpubertal) between the 9 groups. The same statistical methods were used to detect differences between the mean ages at the three growth stages within each group. RESULTS: No statistically significant differences were found between the mean ages of pubertal and postpubertal growth stages between the 9 skeletal patterns. However, class III growers had a significantly earlier onset of prepubertal growth (10.25 ± 1.56 years) when compared to that of class II high angle cases (11.11 ± 1.67 years; P < 0.01). Also, significant differences were found between the mean ages at the three growth stages within the groups. CONCLUSION: A map was created defining the sequence of skeletal maturation for each skeletal growth pattern. This map defines clinically relevant differences in the starting time points and the optimum intervals of growth modification for each skeletal growth pattern.

Implant-supported canine retraction using different reactivation intervals of elastomeric chains: A CBCT-based split-mouth randomized controlled trial

ABSTRACT Introduction: Orthodontists attempt to maximize treatment efficiency regarding time, tooth position and adverse effects. A new approach, not yet explored, is the activation frequency. Objective: The aim of this split-mouth randomized controlled trial was to evaluate the effect of reactivation intervals on the efficiency of tooth movement. Methods: Thirty eight patients having a Class I malocclusion with bimaxillary dentoalveolar protrusion or severe crowding, Class II with mandibular deficiency or Class III, requiring first premolar extraction and canine retraction were recruited. Elastomeric chains producing 150g were replaced every two, four, six or eight weeks. There were 36, 37, 36, and 36 quadrants randomly allocated to these groups, respectively. The canine retraction rate was the primary outcome. Canine tipping, rotation, and root resorption and pain were the secondary outcomes. Only the outcome assessors were blinded to group assignment. Results: The average total movement for the 6 months was 5.14, 5.31, 2.79 and 3.85 mm for the two-week, four-week, six-week and eight-week reactivation intervals, respectively. Root resorption was significantly higher in the two-week and four-week groups. No adverse events were observed. Conclusion: The canine retraction rate, tipping, rotation and pain were similar in 2, 4, 6 and 8-week activation intervals groups. Longer reactivation intervals show less root resorption. The trial protocol was not pre-registered. The study was self-funded.

RESUMO Introdução: Os ortodontistas buscam otimizar a eficiência do tratamento quanto ao tempo de duração, à posição dos dentes e aos efeitos adversos. Um aspecto ainda não avaliado são os diferentes intervalos entre as ativações. Objetivo: O objetivo desse estudo controlado e randomizado de boca dividida foi avaliar a influência de diferentes intervalos de reativação na eficiência da movimentação dentária. Métodos: Foram recrutados 38 pacientes com má oclusão de Classe I com biprotrusão dentoalveolar ou apinhamento severo, Classe II com deficiência mandibular ou Classe III, que necessitavam de extração do primeiro pré-molar e retração do canino. As cadeias elastoméricas gerando 150 g foram substituídas a cada duas, quatro, seis ou oito semanas, constando 36, 37, 36 e 36 quadrantes alocados aleatoriamente nesses grupos, respectivamente. O desfecho primário foi a taxa de retração do canino. Os desfechos secundários foram a inclinação, a rotação e a reabsorção radicular do canino, e a dor. Somente os avaliadores dos resultados não tinham conhecimento da alocação nos grupos. Resultados: O movimento total médio para os seis meses foi de 5,14; 5,31; 2,79 e 3,85 mm para os intervalos de reativação de duas semanas, quatro semanas, seis semanas e oito semanas, respectivamente. A reabsorção radicular foi significativamente maior nos grupos de duas e quatro semanas. Não foram observados eventos adversos. Conclusão: A taxa de retração, a inclinação e a rotação do canino e a dor foram semelhantes nos grupos com intervalos de ativação de duas, quatro, seis e oito semanas. Intervalos de reativação mais longos mostram menos reabsorção radicular. O protocolo do estudo não foi pré-registrado. O estudo foi autofinanciado.

The efficiency of mandibular mini-implants in reducing adverse effects of class II elastics in adolescent female patients: a single blinded, randomized controlled trial.

BACKGROUND: Excessive proclination of lower incisors and other undesirable consequences usually result from the use of class II elastics during orthodontic treatment. The purpose of this study was to attempt to limit the adverse effects of class II elastics by the use of mini implants placed in the mandibular arch in adolescent class II female patients. METHODS: The sample comprised 28 patients, (a mean age of 15.66 ± 2 years for intervention group and 15.1 ± 2.2 years for conventional group) with one-fourth or one-half unit class II canine relationship. The sample was divided into two equal groups. Randomization was carried out by a computer sequence generator with a 1:1 allocation ratio. In the intervention group, the mini implants were inserted between the lower second premolar and first molar, while the conventional group underwent regular class II elastics therapy. The active elastics treatment time was 8 months for both groups. Results were assessed by measurements from pre- and post-elastics lateral cephalometric radiographs. RESULTS: The change in L1 inclination (0.97 ± 0.92°) and L1 AP position (0.31 ± 0.63 mm) did not show a statistically significant difference between the two groups, but a statistically significant difference was found in the U1 retroclination (5.23 ± 1.92°) and U1 distal movement (4.05 ± 1.4 mm) [P ˂ 0.001] and [P ˂ 0.05] respectively in favor of the intervention group. CONCLUSION: Mini-implants in conjunction with class II elastics had no skeletal effect, mainly dentoalveolar and it did not prevent the proclination of lower incisors. There was more distal movement in the upper incisors in the skeletal anchorage group which helped in enhancing the camouflaging of class II malocclusion. TRIAL REGISTRATION: Trial registered "FUE.REC (10)/10-2018" at the FUE registration council for clinical trials/IOP Orthodontic Program October 2018.

Comprehensive comparison of canine retraction using NiTi closed coil springs vs elastomeric chains.

OBJECTIVES: To compare canine retraction using NiTi closed coil springs vs elastomeric chains comprehensively in a split-mouth randomized controlled trial. MATERIALS AND METHODS: The canines in 64 quadrants were randomly retracted into the first premolar extraction spaces using NiTi closed coil springs or elastomeric chains, in the maxilla and mandible. The retraction force was 150 g. Cone beam computed tomography scans and study models were obtained before the start of canine retraction and 6 months later. The rate and total amount of canine retraction, canine rotation, tipping, and root resorption were evaluated. A visual analogue scale was used to evaluate patients' pain experience. RESULTS: The two methods were statistically similar for dental changes, rate of canine retraction, and root resorption. However, patients reported significantly more days of pain with the elastomeric chain compared to the NiTi closed coil springs. CONCLUSIONS: Within the constraints of the current study, using either NiTi closed coil springs or elastomeric chains as force delivery systems for canine retraction results in no significant difference in the rate of canine retraction, tipping, rotation, or root resorption. Pain experience during retraction using elastomeric chains is more significant yet needs further investigation.

Evaluation of the efficiency of computerized algorithms to formulate a decision support system for deepbite treatment planning.

INTRODUCTION: This study aimed to evaluate the efficiency of a newly constructed computer-based decision support system (DSS) on the basis of artificial intelligence technology and designed to plan treatment for patients with a deep overbite. METHODS: With the help of information technology, a DSS was developed specifically for treatment planning of deepbite malocclusion. The program inputs were the components and the contributing factors used commonly by the orthodontic clinicians in deepbite diagnosis. The program outputs were the treatment planning options for deepbite treatment. A total of 357 decisions made by the algorithm were evaluated for accuracy by comparing them to the actual treatment changes of 51 patients with a well-treated deepbite. RESULTS: The decisions made by the algorithm were precise, with 94.4% having a very good agreement with actual treatment changes determined using Cohen's kappa coefficient. CONCLUSIONS: The constructed DSS was shown to be an efficient tool for planning treatment of deep overbite malocclusion in the permanent dentition; thus, the artificial intelligence could be used to formulate a customized plan for orthodontic clinicians.

Evaluation of the miniplate-anchored Forsus Fatigue Resistant Device in skeletal Class II growing subjects: A randomized controlled trial.

OBJECTIVES: To evaluate the use of direct miniplate anchorage in conjunction with the Forsus Fatigue Resistant Device (FFRD) in treatment of skeletal Class II malocclusion. MATERIALS AND METHODS: Forty-eight females with skeletal Class II were randomly allocated to the Forsus plus miniplates (FMP) group (16 patients, age 12.5 ± 0.9 years), Forsus alone (FFRD; 16 patients, age 12.1 ± 0.9 years), or the untreated control group (16 subjects, age 12.1 ± 0.9 years). After leveling and alignment, miniplates were inserted in the mandibular symphysis in the FMP group. The FFRD was inserted directly on the miniplates in the FMP group and onto the mandibular archwires in the FFRD group. The appliances were removed after reaching an edge-to-edge incisor relationship. RESULTS: Data from 46 subjects were analyzed. The effective mandibular length significantly increased in the FMP group only (4.05 ± 0.78). The mandibular incisors showed a significant proclination in the FFRD group (9.17 ± 2.42) and a nonsignificant retroclination in the FMP group (-1.49 ± 4.70). The failure rate of the miniplates was reported to be 13.3%. CONCLUSIONS: The use of miniplates with the FFRD was successful in increasing the effective mandibular length in Class II malocclusion subjects in the short term. The miniplate-anchored FFRD eliminated the unfavorable mandibular incisor proclination in contrast to the conventional FFRD.

Success rates and factors associated with failure of temporary anchorage devices: A prospective clinical trial.

AIM: The objective of the present study was to investigate success rates and associated factors affecting temporary anchorage device (TAD) failure in different biomechanical applications. METHODS: A total of 180 TADs were used as a part of 82 patients' treatment plan (24 males and 58 females); their mean age was 21.41 years. Three types of TADs were used: 50 (3M ESPE, Neuss, Germany), 56 (Bone screw; Jeil Medical, Seoul, Korea), and 74 (Morelli, Sorocaba, Brazil). Eight maxillary and four mandibular sites were selected for insertion. Three different lengths (6, 8, and 10 mm) and three different diameters (1.5, 1.6, and 1.8 mm) were used. The force levels were set at 50, 100, 150, 200, and 250 g. Patient-, implant-, and operator-dependent factors were evaluated throughout the 266 days of function. Qualitative variables were described by proportions and percentages and analyzed using χ2 test. RESULTS: The overall success rate was 82.2%. The higher age group showed a significantly higher success rate. Oral hygiene showed a statistically-significant (P Ë‚ .05) difference between both success and failure groups. All other patient-related factors showed no significant differences. Regarding force levels used, the highest success rate was in 250 g and the lowest was in 100 g. There were no significant differences between both groups regarding other implant- and operator-related factors. CONCLUSIONS: Temporary anchorage devices have a good success rate and are beneficial to be integrated in orthodontic treatment planning. Patient age, oral hygiene, and force level are the most significant factors affecting TAD success.

Three-dimensional imaging for indirect-direct bonding.

The aim of this article is to introduce a new concept of bracket positioning with special consideration to root axes. Cone-beam computed tomography imaging and computer-aided manufacturing were used to produce stereolithographic trays for indirect-direct bonding.

Revisiting the Factors Underlying Maxillary Midline Diastema.

Aim. The aim of this study is to analyze the etiological factors underlying the presence of maxillary midline diastema in a sample of orthodontic patients. Materials and Methods. One hundred patients who fulfill the inclusion criteria were selected from 1355 patients seeking orthodontic treatment. The pretreatment orthodontic records were analyzed. The width of the maxillary midline diastema was measured clinically with a digital caliper at two levels: the mesioincisal angles of the central incisors and five millimeters from the incisal edge. The two measurements were averaged, and patients with diastema of more than 0.5 millimeter in width were enrolled. Results. Diastema is a multifactorial clinical finding with more than one underlying etiological cause. The interrelationship between the familial pattern of midline diastema and the microdontia, macroglossia, labial frenum, and alveolar cleft conforms was clear. The effect of a mesiodens and the upper lateral incisor whether bilaterally missing, unerupted, or peg shaped was minimal. Conclusion. Etiological factors underlying maxillary midline diastema are interconnected. Using a checklist as a guide during handling maxillary midline diastema is important in the different stages of treatment.

Three-dimensional effects of the mini-implant-anchored Forsus Fatigue Resistant Device: A randomized controlled trial.

OBJECTIVE: To detect three-dimensionally the effects of using mini-implant anchorage with the Forsus Fatigue Resistant Device (FFRD). MATERIALS AND METHODS: The sample comprised 43 skeletal Class II females with deficient mandibles. They were randomly allocated into three groups: 16 patients (13.25 ± 1.12 years) received FFRD alone (Forsus group), 15 subjects (13.07 ± 1.41 years) received FFRD and mini-implants (FMI group), and 12 subjects (12.71 ± 1.44 years) were in the untreated control group. Three-dimensional analyses of cone beam computed tomographic images were completed, and the data were statistically analyzed. RESULTS: Class I relationship and overjet correction were achieved in 88% of the cases. None of the two treatment groups showed significant mandibular skeletal effects. In the FMI group, significant headgear effect, decrease in maxillary width, and increase in the lower facial height were noted. In the FMI group, retroclination of maxillary incisors and distalization of maxillary molars were significantly higher. Proclination and intrusion of mandibular incisors were significantly greater in the Forsus group. CONCLUSIONS: FFRD resulted in Class II correction mainly through dentoalveolar effects and with minimal skeletal effects. Utilization of mini-implant anchorage effectively reduced the unfavorable proclination and intrusion of mandibular incisors but did not produce additional skeletal effects.