A Meta-Analysis Review: Nanoparticles as a Gateway to Optimized Boiling Surfaces.

Pool boiling is essential in many industrial manufacturing applications. In addition, it can become critical in the journey towards improving energy generation efficiency and accomplishing the goal of net-zero carbon emissions by 2050 via new or traditional power generation applications. The effectiveness of boiling is governed by the bubble cycle. The chemistry and topographical features of the surface being heated have been found to highly impact the boiling performance, such as in the case of pool boiling enhancement when employing hydrophilic and hydrophobic surfaces via nano/micro heater surface modification. Nevertheless, it is questionable how feasible it is to create these surfaces for large-scale applications due to their manufacturing and maintenance cost and complexity. The current work assesses whether the use of nanoparticles in traditional coolants could potentially unlock the mass production of optimised heating surface modification through a metadata literature review analysis. It was discovered that self-assembled layers created as a result of the deposition of nanoparticles in coolants undergoing pool boiling seem to behave most similarly to manufactured hydrophilic surfaces. The creation of enhanced patterned-heat transfer surfaces is shown to be possible via the use of a combination of different nanoparticle suspensions in coolants.

An integrated new approach methodology for inhalation risk assessment of safe and sustainable by design nanomaterials.

The production and use of nanomaterials (NMs) has increased over the last decades posing relevant questions on their risk after release and exposure of the population or sub-populations. In this context, the safe and sustainable by design (SSbD) approach framework requires to assess the potential hazard connected with intrinsic properties of the material along the whole life cycle of the NM and/or of the nano enabled products. Moreover, in the last years, the use of new advanced methodologies (NAMs) has increasingly gained attention for the use of alternative methods in obtaining relevant information on NMs hazard and risk. Considering the SSbD and the NAMs frameworks, within the ASINA H2020 project, we developed new NAMs devoted at improving the hazard and risk definition of different Ag and TiO2 NPs. The NAMs are developed considering two air liquid interface exposure systems, the Vitrocell Cloud-α and the Cultex Compact module and the relevant steps to obtain reproducible exposures are described. The new NAMs build on the integration of environmental monitoring campaigns at nano-coating production sites, allowing the quantification by the multiple-path particle dosimetry (MPPD) model of the expected lung deposited dose in occupational settings. Starting from this information, laboratory exposures to the aerosolized NPs are performed by using air liquid interface exposure equipment and human alveolar cells (epithelial cells and macrophages), replicating the doses of exposure estimated in workers by MPPD. Preliminary results on cell viability and inflammatory responses are reported. The proposed NAMs may represent possible future reference procedures for assessing the NPs inhalation toxicology, supporting risk assessment at real exposure doses.

Mouthfeel subqualities in wines: A current insight on sensory descriptors and physical-chemical markers.

Astringency and more generally mouthfeel perception are relevant to the overall quality of the wine. However, their origin and description are still uncertain and are constantly updating. Additionally, the terminology related to mouthfeel properties is expansive and extremely diversified, characterized by common traditional terms as well as novel recently adopted descriptors. In this context, this review evaluated the mention frequency of astringent subqualities and other mouthfeel attributes in the scientific literature of the last decades (2000-August 17, 2022). One hundred and twenty-five scientific publications have been selected and classified based on wine typology, aim, and instrumental-sensorial methods adopted. Dry resulted as the most frequent astringent subquality (10% for red wines, 8.6% for white wines), while body-and related terms-is a common mouthfeel sensation for different wine types, although its concept is still vague. Alongside, promising analytical and instrumental techniques investigating and simulating the in-mouth properties are discussed in detail, such as rheology for the viscosity and tribology for the lubrication loss, as well as the different approaches for the quantitative and qualitative evaluation of the interaction between salivary proteins and astringency markers. A focus on the phenolic compounds involved in the tactile perception was conducted, with tannins being the compounds conventionally found responsible for astringency. Nevertheless, other non-tannic polyphenolic classes (i.e., flavonols, phenolic acids, anthocyanins, anthocyanin-derivative pigments) as well as chemical-physical factors and the wine matrix (i.e., polysaccharides, mannoproteins, ethanol, glycerol, and pH) can also contribute to the wine in-mouth sensory profile. An overview of mouthfeel perception, factors involved, and its vocabulary is useful for enologists and consumers.

Combined effect of harvest time and postharvest dehydration length on the composition of withered grapes for Sforzato di Valtellina DOCG wine production.

BACKGROUND: Sforzato di Valtellina (Sfursat) is a PDO reinforced red wine produced in Valtellina (northern Italy) from partially withered red grapes (Vitis vinifera L.) cv. Nebbiolo. The present study aimed to evaluate the combined influence of different grape ripeness levels and withering length on the chemical composition, mechanical properties, and phenolic profile of Nebbiolo winegrapes from two Valtellina vineyards. During three consecutive vintages (2019, 2020, and 2021), three different technological binomials have been tested: early harvest/long withering (EL), medium-term harvest/medium-term withering (MM), and late harvest/short withering (LS). RESULTS: At the end of the withering process, EL thesis usually presented the highest values of sugars and acidity. Extractable seed polyphenols showed a decreasing trend by leaving the grapes on the plant longer, and this effect increased considerably after withering with respect to fresh samples. EL and MM evidenced the greater concentration of these compounds expressed on grape weight, particularly for tannins. Instead, skin-extracted total phenolics were less influenced by the harvest time, whereas their concentration increased after withering. The harvest time appears to have a higher impact than the withering length on the final extractable anthocyanin content, although the trend was no stable during the vintages or common for the two vineyards evaluated. EL and MM experienced the highest contents of grape skin tannins in most cases, suggesting that a longer withering increases their concentration. CONCLUSION: Harvest time and withering length can be modulated according to the desired oenological objective, promoting the valorization of grape potentialities. The choice to harvest the grapes earlier and enhance the withering length should be preferred to obtain wines with higher acidity and phenolic content, more suitable for long-ageing period. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Data-Driven Quantitative Intrinsic Hazard Criteria for Nanoproduct Development in a Safe-by-Design Paradigm: A Case Study of Silver Nanoforms.

The current European (EU) policies, that is, the Green Deal, envisage safe and sustainable practices for chemicals, which include nanoforms (NFs), at the earliest stages of innovation. A theoretically safe and sustainable by design (SSbD) framework has been established from EU collaborative efforts toward the definition of quantitative criteria in each SSbD dimension, namely, the human and environmental safety dimension and the environmental, social, and economic sustainability dimensions. In this study, we target the safety dimension, and we demonstrate the journey toward quantitative intrinsic hazard criteria derived from findable, accessible, interoperable, and reusable data. Data were curated and merged for the development of new approach methodologies, that is, quantitative structure-activity relationship models based on regression and classification machine learning algorithms, with the intent to predict a hazard class. The models utilize system (i.e., hydrodynamic size and polydispersity index) and non-system (i.e., elemental composition and core size)-dependent nanoscale features in combination with biological in vitro attributes and experimental conditions for various silver NFs, functional antimicrobial textiles, and cosmetics applications. In a second step, interpretable rules (criteria) followed by a certainty factor were obtained by exploiting a Bayesian network structure crafted by expert reasoning. The probabilistic model shows a predictive capability of ≈78% (average accuracy across all hazard classes). In this work, we show how we shifted from the conceptualization of the SSbD framework toward the realistic implementation with pragmatic instances. This study reveals (i) quantitative intrinsic hazard criteria to be considered in the safety aspects during synthesis stage, (ii) the challenges within, and (iii) the future directions for the generation and distillation of such criteria that can feed SSbD paradigms. Specifically, the criteria can guide material engineers to synthesize NFs that are inherently safer from alternative nanoformulations, at the earliest stages of innovation, while the models enable a fast and cost-efficient in silico toxicological screening of previously synthesized and hypothetical scenarios of yet-to-be synthesized NFs.

Preliminary Toxicological Analysis in a Safe-by-Design and Adverse Outcome Pathway-Driven Approach on Different Silver Nanoparticles: Assessment of Acute Responses in A549 Cells.

Silver nanoparticles (Ag NPs) are among the most widely used metal-based nanomaterials (NMs) and their applications in different products, also as antibacterial additives, are increasing. In the present manuscript, according to an adverse outcome pathway (AOP) approach, we tested two safe-by-design (SbD) newly developed Ag NPs coated with hydroxyethyl cellulose (HEC), namely AgHEC powder and AgHEC solution. These novel Ag NPs were compared to two reference Ag NPs (naked and coated with polyvinylpyrrolidone-PVP). Cell viability, inflammatory response, reactive oxygen species, oxidative DNA damage, cell cycle, and cell-particle interactions were analyzed in the alveolar in vitro model, A549 cells. The results show a different toxicity pattern of the novel Ag NPs compared to reference NPs and that between the two novel NPs, the AgHEC solution is the one with the lower toxicity and to be further developed within the SbD framework.

Microplastics from miscellaneous plastic wastes: Physico-chemical characterization and impact on fish and amphibian development.

Microplastic pollution represents a global problem with negative impacts on aquatic environment and organisms' health. To date, most of the laboratory toxicological studies on microplastics (MPs) have made use of single commercial micro and nano-polymers, which do not reflect the heterogeneity of environmental MPs. To improve the relevance of the hazard assessment, micrometer-sized plastic particles of miscellaneous non-reusable waste plastics, with size <100 µm and <50 µm (waste microplastics, wMPs), were characterized by microscopic and spectroscopic techniques and tested on developing zebrafish and Xenopus laevis by FET and FETAX assays respectively. Moreover, the modalities of wMP interaction with the embryonic structures, as well as the histological lesions, were explored by light and electron microscopy. We have shown that wMPs had very heterogeneous shapes and sizes, were mainly composed of polyethylene and polypropylene and contained metal and organic impurities, as well as submicrometric particle fractions, features that resemble those of environmental occurring MPs. wMPs (0.1-100 mg/L) caused low rate of mortality and altered phenotypes in embryos, but established species-specific biointeractions. In zebrafish, wMPs by adhering to chorion were able to delay hatching in a size and concentration dependent manner. In Xenopus embryos, which open stomodeum earlier than zebrafish, wMPs were accumulated in intestinal tract, where produced mechanical stress and stimulated mucus overproduction, attesting an irritation response. Although wMP biointeractions did not interfere with morphogenesis processes, further studies are needed to understand the underlying mechanisms and long-term impact of these, or even smaller, wMPs.

Hemorrhagic risk and intracranial complications in patients with minor head injury (MHI) taking different oral anticoagulants.

The correlation between direct oral anticoagulants (DOACs) or Vitamin K Antagonist (VKAs) intake and the incidence of intracranial complications after minor head injury (MHI) is still object of debate: preliminary observation seems to demonstrate lower incidence in intracranial bleeding complications (ICH) in patients taking DOACs than VKA. METHODS. This prospective and observational study was performed to clarify the incidence of ICH in patients in DOACs compared to VKAs. Between January 2016 and April 2018 we have recorded in our ED patients with MHI taking oral anticoagulants. Their hemorragic risk score was calculated and recorded for each patient (Has Bled, Atria and Orbit). RESULTS A total of 402 patients with MHI taking anticoagulant were collected: 226 were receiving one of the four DOACs (dabigatran, rivaroxaban, apixaban or edoxaban) while 176 patients were in therapy with VKA. The rate of intracranial complications was significantly lower in patients receiving DOACs than in patients treated with VKA (p < 0.01). In the VKA group two patients died because of intracranial bleeding. No deaths were recorded in the DOACs group. DISCUSSION patients with MHI who take DOACs have a significant lower incidence of intracranial bleeding complications than those treated with vitamin k antagonists. This statement is supported by the observation that the hemorrhagic risk, measured according to the chosen scores, was similar between the two groups.

Anti-cancer activity of 5-O-alkyl 1,4-imino-1,4-dideoxyribitols.

New derivatives of 1,4-dideoxy-1,4-imino-D-ribitol have been prepared and evaluated for their cytotoxicity on solid and haematological malignancies. 1,4-Dideoxy-5-O-[(9Z)-octadec-9-en-1-yl]-1,4-imino-D-ribitol (13, IC(50) ∼2 µM) and its C(18)-analogues (IC(50) <10 µM) are cytotoxic toward SKBR3 (breast cancer) cells. 13 also inhibits (IC(50) ∼8 µM) growth of JURKAT cells.

Potent synergistic interaction between the Nampt inhibitor APO866 and the apoptosis activator TRAIL in human leukemia cells.

OBJECTIVE: The nicotinamide phosphoribosyltransferase (Nampt) inhibitor APO866 depletes intracellular nicotinamide adenine dinucleotide (NAD(+)) and shows promising anticancer activity in preclinical studies. Tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) binds to plasma membrane receptors DR4 and DR5 and induces apoptosis via caspase-8 and -10. Here we have explored the interaction between APO866 and TRAIL in leukemia cell lines and in primary B-cell chronic lymphocytic leukemia cells. MATERIALS AND METHODS: Cells were treated with APO866, TRAIL, or their combination. Viability and mitochondrial transmembrane potential (ΔΨ(m)) were determined by cell staining with propidium iodide and tetramethylrhodamine ethyl ester, respectively, and flow cytometry. Nampt and γ-tubulin levels, as well as caspase-3 cleavage were detected by immunoblotting. DR4 and DR5 expression were assessed by immunostaining and flow cytometry. Caspases were inhibited with zVAD-FMK and zDEVD-FMK; autophagy with 3-methyladenine, LY294002, and wortmannin. Intracellular NAD(+) and adenosine triphosphate (ATP) were measured by cycling assays and high-performance liquid chromatography (HPLC), respectively. RESULTS: APO866 induced NAD(+) depletion, ΔΨ(m) dissipation, and ATP shortage in leukemia cells, thereby leading to autophagic cell death. TRAIL induced caspase-dependent apoptosis. TRAIL addition to APO866 synergistically increased its activity in leukemia cells by enhancing NAD(+) depletion, ΔΨ(m) dissipation, and ATP shortage. No DR5 upregulation at the cell surface in response to APO866 was observed. Remarkably, in healthy leukocytes APO866 and TRAIL were poorly active and failed to show any cooperation. CONCLUSIONS: Activation of the extrinsic apoptotic cascade with TRAIL selectively amplifies the sequelae of Nampt inhibition in leukemia cells, and appears as a promising strategy to enhance APO866 activity in hematological malignancies.

Monoclonal antibodies for non-Hodgkin's lymphoma: state of the art and perspectives.

Monoclonal antibodies have been the most successful therapeutics ever brought to cancer treatment by immune technologies. The use of monoclonal antibodies in B-cell Non-Hodgkin's lymphomas (NHL) represents the greatest example of these advances, as the introduction of the anti-CD20 antibody rituximab has had a dramatic impact on how we treat this group of diseases today. Despite this success, several questions about how to optimize the use of monoclonal antibodies in NHL remain open. The best administration schedules, as well as the optimal duration of rituximab treatment, have yet to be determined. A deeper knowledge of the mechanisms underlying resistance to rituximab is also necessary in order to improve the activity of this and of similar therapeutics. Finally, new antibodies and biological agents are entering the scene and their advantages over rituximab will have to be assessed. We will discuss these issues and present an overview of the most significant clinical studies with monoclonal antibodies for NHL treatment carried out to date.