SAXS data modelling for the characterisation of ion tracks in polymers.

Here, we present new models to fit small angle X-ray scattering (SAXS) data for the characterization of ion tracks in polymers. Ion tracks in polyethylene terephthalate (PET), polycarbonate (PC), polyimide (PI) and polymethyl methacrylate (PMMA) were created by swift heavy ion irradiation using 197Au and 238U with energies between 185 MeV and 2.0 GeV. Transmission SAXS measurements were performed at the Australian Synchrotron. SAXS data were analysed using two new models that describe the tracks by a cylindrical structure composed of a highly damaged core with a gradual transition to the undamaged material. First, we investigate the 'Soft Cylinder Model', which assumes a smooth function to describe the transition region by a gradual change in density from a core to a matrix. As a simplified and computational less expensive version of the 'Soft Cylinder Model', the 'Core Transition Model' was developed to enable fast fitting. This model assumes a linear increase in density from the core to the matrix. Both models yield superior fits to the experimental SAXS data compared with the often-used simple 'Hard Cylinder Model' assuming a constant density with an abrupt transition.

Preferred orientation and its effects on intensity-correlation measurements.

Intensity-correlation measurements allow access to nanostructural information on a range of ordered and disordered materials beyond traditional pair-correlation methods. In real space, this information can be expressed in terms of a pair-angle distribution function (PADF) which encodes three- and four-body distances and angles. To date, correlation-based techniques have not been applied to the analysis of microstructural effects, such as preferred orientation, which are typically investigated by texture analysis. Preferred orientation is regarded as a potential source of error in intensity-correlation experiments and complicates interpretation of the results. Here, the theory of preferred orientation in intensity-correlation techniques is developed, connecting it to the established theory of texture analysis. The preferred-orientation effect is found to scale with the number of crystalline domains in the beam, surpassing the nanostructural signal when the number of domains becomes large. Experimental demonstrations are presented of the orientation-dominant and nanostructure-dominant cases using PADF analysis. The results show that even minor deviations from uniform orientation produce the strongest angular correlation signals when the number of crystalline domains in the beam is large.

Local symmetry predictors of mechanical stability in glasses.

The mechanical properties of crystals are controlled by the translational symmetry of their structures. But for glasses with a disordered structure, the link between the symmetry of local particle arrangements and stability is not well established. In this contribution, we provide experimental verification that the centrosymmetry of nearest-neighbor polyhedra in a glass strongly correlates with the local mechanical stability. We examine the distribution of local stability and local centrosymmetry in a glass during aging and deformation using microbeam x-ray scattering. These measurements reveal the underlying relationship between particle-level structure and larger-scale behavior and demonstrate that spatially connected, coordinated local transformations to lower symmetry structures are fundamental to these phenomena. While glassy structures lack obvious global symmetry breaking, local structural symmetry is a critical factor in predicting stability.

Bovine Meniscus Middle Zone Tissue: Measurement of Collagen Fibril Behavior During Compression.

BACKGROUND: Type I collagen is the major component of the extracellular matrix of the knee's meniscus and plays a central role in that joint's biomechanical properties. Repair and reconstruction of tissue damage often requires a scaffold to assist the body to rebuild. The middle zone of bovine meniscus is a material that may be useful for the preparation of extracellular matrix scaffolds. METHODS: Here, synchrotron-based small-angle X-ray scattering (SAXS) patterns of bovine meniscus were collected during unconfined compression. Collagen fibril orientation, D-spacing, compression distance and force were measured. RESULTS: The collagen fibrils in middle zone meniscal fibrocartilage become more highly oriented perpendicular to the direction of compression. The D-spacing also increases, from 65.0 to 66.3 nm with compression up to 0.43 MPa, representing a 1.8% elongation of collagen fibrils perpendicular to the compression. CONCLUSION: The elasticity of the collagen fibrils under tension along their length when the meniscus is compressed, therefore, contributes to the overall elastic response of the meniscus only under loads that exceed those likely to be experienced physiologically.

Structural relationships for the design of responsive azobenzene-based lyotropic liquid crystals.

Light-responsive binary (azobenzene + solvent) lyotropic liquid crystals (LCs) were investigated by structural modification of simple azobenzene molecules. Three benzoic acid-containing azobenzene molecules 4-(4-(hydroxyphenyl)diazenyl)benzoic acid (AZO1), 3-(4-(hydroxyphenyl)diazenyl)benzoic acid (AZO2) and 5-(4-(hydroxyphenyl)diazenyl)isophthalic acid (AZO3) were produced with various amide substitutions to produce tectons with a variety of hydrophobicity, size and branching. The LC mesophases formed by binary (azobenzene + solvent) systems with low volatility solvents dimethylsulfoxide (DMSO) and N,N-dimethylformamide (DMF) as well as the protic ionic liquids ethylammonium formate (EAF) and propylammonium formate (PAF), were investigated using a combination of small-angle X-ray and neutron scattering (SAXS and SANS) as well as polarising light microscopy (PLM). Increasing alkyl group length was found to have a strong influence on LC phase spacing, and changes in the position of substitution on the benzene ring influenced the preferred curvature of phases. UV-induced trans to cis isomerization of the samples was shown to influence ordering and optical birefringence, indicating potential applications in optical devices.

Rich liquid crystal phase behavior of novel alkyl-tri(ethylene glycol)-glucoside carbohydrate surfactants.

Carbohydrates are appealing non-ionic surfactant head-groups as they are naturally abundant, generally biocompatible and biodegradable, and readily functionalized. Herein, we explore the phase behavior of seven novel carbohydrate-based surfactants (CBS) containing a tri-ethylene glycol (TEG) linker between a glucose head-group and alkyl tail-group, with linear saturated (C8-18) and cis-unsaturated (C18:1) alkyl chains. At high aqueous concentrations, these glycolipid-like surfactants transition into a variety of lyotropic liquid crystalline phases following an expected concentration phase sequence: hexagonal (H1) → bicontinuous cubic (V1) → lamellar (Lα). Using polarizing light microscopy (PLM), a binary (surfactant-water) phase diagram for each surfactant was constructed across a temperature range (25-80 °C) revealing thermotropic behavior and a broadening of liquid crystal phase regions with increasing alkyl chain length. There was also a significant difference between saturated and unsaturated alkyl chains, due to the cis-unsaturated 'statistical bend' lowering the melting point. Small-angle X-ray scattering (SAXS) measurements were performed to characterize the liquid crystal phases, identifying highly-ordered p6m,Ia3d, and Lα crystallographic space-groups with up to 7 resolved Bragg peaks, likely due to the highly anisometric nature of the TEG-linked surfactants. The phases were shown to be more numerous and exhibited greater thermal-stability compared to well-characterized alkyl glucoside surfactants lacking an oligoethylene spacer in the literature. Finally, the characteristic dimensions of each phase were determined to enable visualization of the internal microstructures, providing insight into the impact of molecular shape and the distribution of hydro-philicity/phobicity on the formation and stability of liquid crystalline mesophases.

Favored local structures in amorphous colloidal packings measured by microbeam X-ray diffraction.

Local structure and symmetry are keys to understanding how a material is formed and the properties it subsequently exhibits. This applies to both crystals and amorphous and glassy materials. In the case of amorphous materials, strong links between processing and history, structure and properties have yet to be made because measuring amorphous structure remains a significant challenge. Here, we demonstrate a method to quantify proportions of the bond-orientational order of nearest neighbor clusters [Steinhardt, et al. (1983) Phys Rev B 28:784-805] in colloidal packings by statistically analyzing the angular correlations in an ensemble of scanning transmission microbeam small-angle X-ray scattering (µSAXS) patterns. We show that local order can be modulated by tuning the potential between monodisperse, spherical colloidal silica particles using salt and surfactant additives and that more pronounced order is obtained by centrifugation than sedimentation. The order in the centrifuged glasses reflects the ground state order in the dispersion at lower packing fractions. This diffraction-based method can be applied to amorphous systems across decades in length scale to connect structure to behavior in disordered systems with a range of particle interactions.

Improved radiation dose efficiency in solution SAXS using a sheath flow sample environment.

Radiation damage is a major limitation to synchrotron small-angle X-ray scattering analysis of biomacromolecules. Flowing the sample during exposure helps to reduce the problem, but its effectiveness in the laminar-flow regime is limited by slow flow velocity at the walls of sample cells. To overcome this limitation, the coflow method was developed, where the sample flows through the centre of its cell surrounded by a flow of matched buffer. The method permits an order-of-magnitude increase of X-ray incident flux before sample damage, improves measurement statistics and maintains low sample concentration limits. The method also efficiently handles sample volumes of a few microlitres, can increase sample throughput, is intrinsically resistant to capillary fouling by sample and is suited to static samples and size-exclusion chromatography applications. The method unlocks further potential of third-generation synchrotron beamlines to facilitate new and challenging applications in solution scattering.

Simultaneous X-ray fluorescence and scanning X-ray diffraction microscopy at the Australian Synchrotron XFM beamline.

Owing to its extreme sensitivity, quantitative mapping of elemental distributions via X-ray fluorescence microscopy (XFM) has become a key microanalytical technique. The recent realisation of scanning X-ray diffraction microscopy (SXDM) meanwhile provides an avenue for quantitative super-resolved ultra-structural visualization. The similarity of their experimental geometries indicates excellent prospects for simultaneous acquisition. Here, in both step- and fly-scanning modes, robust, simultaneous XFM-SXDM is demonstrated.

Exploring the in meso crystallization mechanism by characterizing the lipid mesophase microenvironment during the growth of single transmembrane α-helical peptide crystals.

The proposed mechanism for in meso crystallization of transmembrane proteins suggests that a protein or peptide is initially uniformly dispersed in the lipid self-assembly cubic phase but that crystals grow from a local lamellar phase, which acts as a conduit between the crystal and the bulk cubic phase. However, there is very limited experimental evidence for this theory. We have developed protocols to investigate the lipid mesophase microenvironment during crystal growth using standard procedures readily available in crystallography laboratories. This technique was used to characterize the microenvironment during crystal growth of the DAP12-TM peptide using synchrotron small angle X-ray scattering (SAXS) with a micro-sized X-ray beam. Crystal growth was found to occur from the gyroid cubic mesophase. For one in four crystals, a highly oriented local lamellar phase was observed, providing supporting evidence for the proposed mechanism for in meso crystallization. A new observation of this study was that we can differentiate diffraction peaks from crystals grown in meso, from peaks originating from the surrounding lipid matrix, potentially opening up the possibility of high-throughput SAXS analysis of in meso grown crystals.This article is part of the themed issue 'Soft interfacial materials: from fundamentals to formulation'.

Controlling the characteristics of lamellar liquid crystals using counterion choice, fluorination and temperature.

The characteristics of robust and highly ordered fluorinated lamellar phases were explored as a function of temperature, counterion identity and fluorination of the surfactant and co-surfactant. Structural and composition effects were probed using a combination of small-angle scattering of X-rays and neutrons, polarising microscopy and calorimetry. It was found that in general, the phases remained remarkably stable with increasing temperature, showing only moderate loss of order and increased membrane flexibility. By changing the surfactant's cationic counterion, it was possible to exert influence on both the shape of micelles formed and the inter-layer spacing of the lamellar phases obtained. Ordering and crystallinity of the lamellar membranes could be controlled by the level of fluorination of both the surfactant and co-surfactant. These results suggest that subtle manipulations of selected control parameters including co-surfactant selection and counterion choice can provide a high level of control over membrane spacing and local order within lamellar phases, providing guidance where these materials are used as templates.

Novel steric stabilizers for lyotropic liquid crystalline nanoparticles: PEGylated-phytanyl copolymers.

Lyotropic liquid crystalline nanostructured particles (e.g., cubosomes and hexosomes) are being investigated as delivery systems for therapeutics in biomedical and pharmaceutical applications. Long term stability of these particulate dispersions is generally provided by steric stabilizers, typically commercially available amphiphilic copolymers such as Pluronic F127. Few examples exist of tailored molecular materials designed for lyotropic liquid crystalline nanostructured particle stabilization. A library of PEGylated-phytanyl copolymers (PEG-PHYT) with varying PEG molecular weights (200-14K Da) was synthesized to assess their performance as steric stabilizers for cubosomes and to establish structure-property relationships. The PEGylated-lipid copolymers were first found to self-assemble in excess water in the absence of cubosomes and also displayed thermotropic liquid crystal phase behavior under cross-polarized light microscopy. An accelerated stability assay was used to assess the performance of the copolymers, compared to Pluronic F127, for stabilizing phytantriol-based cubosomes. Several of the PEGylated-lipid copolymers showed steric stabilizer effectiveness comparable to Pluronic F127. Using synchrotron small-angle X-ray scattering and cryo-transmission electron microscopy, the copolymers were shown to retain the native internal lyotropic liquid crystalline structure, double diamond cubic phase (Q2(D)), of phytantriol dispersions; an important attribute for controlling downstream performance.

Age dependent differences in collagen alignment of glutaraldehyde fixed bovine pericardium.

Bovine pericardium is used for heart valve leaflet replacement where the strength and thinness are critical properties. Pericardium from neonatal animals (4-7 days old) is advantageously thinner and is considered as an alternative to that from adult animals. Here, the structures of adult and neonatal bovine pericardium tissues fixed with glutaraldehyde are characterized by synchrotron-based small angle X-ray scattering (SAXS) and compared with the mechanical properties of these materials. Significant differences are observed between adult and neonatal tissue. The glutaraldehyde fixed neonatal tissue has a higher modulus of elasticity (83.7 MPa) than adult pericardium (33.5 MPa) and a higher normalised ultimate tensile strength (32.9 MPa) than adult pericardium (19.1 MPa). Measured edge on to the tissue, the collagen in neonatal pericardium is significantly more aligned (orientation index (OI) 0.78) than that in adult pericardium (OI 0.62). There is no difference in the fibril diameter between neonatal and adult pericardium. It is shown that high alignment in the plane of the tissue provides the mechanism for the increased strength of the neonatal material. The superior strength of neonatal compared with adult tissue supports the use of neonatal bovine pericardium in heterografts.

Collagen fibril diameter and leather strength.

The main structural component of leather and skin is type I collagen in the form of strong fibrils. Strength is an important property of leather, and the way in which collagen contributes to the strength is not fully understood. Synchrotron-based small angle X-ray scattering (SAXS) is used to measure the collagen fibril diameter of leather from a range of animals, including sheep and cattle, that had a range of tear strengths. SAXS data were fit to a cylinder model. The collagen fibril diameter and tear strength were found to be correlated in bovine leather (r(2) = 0.59; P = 0.009), with stronger leather having thicker fibrils. There was no correlation between orientation index, i.e., fibril alignment, and fibril diameter for this data set. Ovine leather showed no correlation between tear strength and fibril diameter, nor was there a correlation across a selection of other animal leathers. The findings presented here suggest that there may be a different structural motif in skin compared with tendon, particularly ovine skin or leather, in which the diameter of the individual fibrils contributes less to strength than fibril alignment does.

A new class of animal collagen masquerading as an insect silk.

Collagen is ubiquitous throughout the animal kingdom, where it comprises some 28 diverse molecules that form the extracellular matrix within organisms. In the 1960s, an extracorporeal animal collagen that forms the cocoon of a small group of hymenopteran insects was postulated. Here we categorically demonstrate that the larvae of a sawfly species produce silk from three small collagen proteins. The native proteins do not contain hydroxyproline, a post translational modification normally considered characteristic of animal collagens. The function of the proteins as silks explains their unusual collagen features. Recombinant proteins could be produced in standard bacterial expression systems and assembled into stable collagen molecules, opening the door to manufacture a new class of artificial collagen materials.

Silk from crickets: a new twist on spinning.

Raspy crickets (Orthoptera: Gryllacrididae) are unique among the orthopterans in producing silk, which is used to build shelters. This work studied the material composition and the fabrication of cricket silk for the first time. We examined silk-webs produced in captivity, which comprised cylindrical fibers and flat films. Spectra obtained from micro-Raman experiments indicated that the silk is composed of protein, primarily in a beta-sheet conformation, and that fibers and films are almost identical in terms of amino acid composition and secondary structure. The primary sequences of four silk proteins were identified through a mass spectrometry/cDNA library approach. The most abundant silk protein was large in size (300 and 220 kDa variants), rich in alanine, glycine and serine, and contained repetitive sequence motifs; these are features which are shared with several known beta-sheet forming silk proteins. Convergent evolution at the molecular level contrasts with development by crickets of a novel mechanism for silk fabrication. After secretion of cricket silk proteins by the labial glands they are fabricated into mature silk by the labium-hypopharynx, which is modified to allow the controlled formation of either fibers or films. Protein folding into beta-sheet structure during silk fabrication is not driven by shear forces, as is reported for other silks.

Invited review the coiled coil silk of bees, ants, and hornets.

In this article, we review current knowledge about the silk produced by the larvae of bees, ants, and hornets [Apoidea and Vespoidea: Hymenoptera]. Different species use the silk either alone or in composites for a variety of purposes including mechanical reinforcement, thermal regulation, or humidification. The characteristic molecular structure of this silk is α-helical proteins assembled into tetrameric coiled coils. Gene sequences from seven species are available, and each species possesses a copy of each of four related silk genes that encode proteins predicted to form coiled coils. The proteins are ordered at multiple length scales within the labial gland of the final larval instar before spinning. The insects control the morphology of the silk during spinning to produce either fibers or sheets. The silk proteins are small and non repetitive and have been produced artificially at high levels by fermentation in E. coli. The artificial silk proteins can be fabricated into materials with structural and mechanical properties similar to those of native silks.

Effect of protic ionic liquids (PILs) on the formation of non-ionic dodecyl poly(ethylene oxide) surfactant self-assembly structures and the effect of these surfactants on the nanostructure of PILs.

The ability of a series of non-ionic dodecyl poly(ethylene oxide) surfactants to form micelles in a variety of protic ionic liquids (PILs) was investigated using small and wide angle X-ray scattering (SAXS/WAXS). The C(12)E(n) surfactants with n = 3-8 were examined in PILs which contained either an ethyl, diethyl, triethyl, butyl, pentyl, ethanol or pentanol-ammonium cation in conjunction with either a nitrate or formate anion. The ability of the PILs to support micelles of these surfactants was highly dependent on their liquid nanostructure. The PILs containing hydroxyl groups on the cations were not nanostructured and had very low surfactant solubility (<1 wt%). The highly nanostructured PILs with butylammonium or pentylammonium cations contain large non-polar domains, and had excellent surfactant solubility, but due to the greater hydrocarbon solubility they had insufficient drive from the "solvophobic effect" to enable micelle formation. The PILs of ethylammonium nitrate (EAN), propylammonium nitrate (PAN), diethylammonium formate (DEAF) and triethylammonium formate (TEAF) had smaller non-polar domains, and all supported micelle formation below 20 wt% surfactant. The critical micelle concentration (CMC) of surfactants in EAN were two orders of magnitude greater than in water. The minimum molecular areas of the poly(ethylene oxide) head groups at the air/ionic liquid interface, A(min), were significantly larger in EAN than in water. The SAXS patterns from the micelles present in EAN fitted well to ellipsoids, whereas the micelles present in PAN fitted well to spheres. The nanostructure of select PILs was also influenced by the presence of surfactants.

Diversity observed in the nanostructure of protic ionic liquids.

The nanostructure of a series of 20 protic ionic liquids (PILs) has been investigated using small- and wide-angle X-ray scattering (SAXS and WAXS). The PILs contained alkylammonium, dialkylammonium, trialkylammonium, and cyclic ammonium cations combined with organic or inorganic anions. The presence of hydroxyl and methoxy substituents on the alkyl chains of the cations was also explored. Many of the PILs showed a nanostructure resulting from segregation of the polar and nonpolar components of the ionic liquid. It was found that this segregation was enhanced for longer alkyl chains, with a corresponding increase in the length scale, whereas the presence of hydroxyl groups on the alkyl chains led to much less ordered liquids. The broad range of protic ionic liquids studied allowed several structure-property relationships to be established. The solvophobic effect was shown to be dependent on the nanostructure of the PILs. These PILs support amphiphile self-assembly, and it was shown that the less structured PILs had more "water-like" behavior in the diversity of lyotropic liquid-crystal phases supported, and the thermal stability ranges for these phases.

Colloidal amphiphile self-assembly particles composed of gadolinium oleate and myverol: evaluation as contrast agents for magnetic resonance imaging.

Gadolinium oleate has been added at various concentrations to a Myverol inverse bicontinuous cubic phase forming system, and the potential of these systems as magnetic resonance imaging (MRI) contrast agents has been investigated. Differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS), and cryo-transmission electron microscopy (cryo-TEM) measurements on the Gd oleate/Myverol systems indicate that Gd oleate is at least partially incorporated within the cubic phase of Myverol. However, at Gd oleate concentrations greater than 1 wt %, partial phase separation of the system may occur with the formation of a Gd-oleate-rich lamellar phase as well as the cubic phase. Bulk Gd oleate/Myverol mixtures can be dispersed into stable colloidal dispersions. SAXS and cryo-TEM measurements on these dispersions indicate that the presence of Gd oleate in the Myverol system prevents the formation of cubosomes from the bulk cubic phase. Instead, the dispersion consists of putative Gd-oleate-rich nonswelling lamellar nanoparticles as well as colloidal particles lacking ordered internal structure. In vitro studies on these dispersions demonstrated that the relaxivity of select Gd oleate/Myverol systems is much higher than that of pure Gd oleate, exemplifying the promise of this system type for magnetic resonance imaging. The highest water proton relaxivities (r(1) = 34.2 mM(-1) s(-1) and r(2) = 27.3 mM(-1) s(-1) at 20 MHz and room temperature) were obtained at a Gd oleate loading concentration of 1 wt %, with a subsequent decrease in relaxivity with increasing Gd oleate concentration. These maximum relaxivities compare favorably with the relaxivities for the commercial contrast agent, Magnevist (r(1) = 4.91 mM(-1) s(-1) and r(2) = 6.26 mM(-1) s(-1) at 20 MHz and room temperature).