RESUMO
Seasonal outbreaks of respiratory viral infections remain a global concern, with increasing morbidity and mortality rates recorded annually. Timely and false responses contribute to the widespread of respiratory pathogenic diseases owing to similar symptoms at an early stage and subclinical infection. The prevention of emerging novel viruses and variants is also a big challenge. Reliable point-of-care diagnostic assays for early infection diagnosis play a critical role in the response to threats of epidemics or pandemics. We developed a facile method for specifically identifying different viruses based on surface-enhanced Raman spectroscopy (SERS) with pathogen-mediated composite materials on Au nanodimple electrodes and machine learning (ML) analyses. Virus particles were trapped in three-dimensional plasmonic concave spaces of the electrode via electrokinetic preconcentration, and Au films were simultaneously electrodeposited, leading to the acquisition of intense and in-situ SERS signals from the Au-virus composites for ultrasensitive SERS detection. The method was useful for rapid detection analysis (<15 min), and the ML analysis for specific identification of eight virus species, including human influenza A viruses (i.e., H1N1 and H3N2 strains), human rhinovirus, and human coronavirus, was conducted. The highly accurate classification was achieved using the principal component analysis-support vector machine (98.9%) and convolutional neural network (93.5%) models. This ML-associated SERS technique demonstrated high feasibility for direct multiplex detection of different virus species for on-site applications.
Assuntos
Técnicas Biossensoriais , Vírus da Influenza A Subtipo H1N1 , Vírus da Influenza A , Humanos , Vírus da Influenza A Subtipo H3N2 , Análise Espectral Raman/métodosRESUMO
Nanoscale plasmonic hotspots play a critical role in the enhancement of molecular Raman signals, enabling the sensitive and reliable trace analysis of biomedical molecules via surface-enhanced Raman spectroscopy (SERS). However, effective and label-free SERS diagnoses in practical fields remain challenging because of clinical samples' random adsorption and size mismatch with the nanoscale hotspots. Herein, we suggest a novel SERS strategy for interior hotspots templated with protein@Au core-shell nanostructures prepared via electrochemical one-pot Au deposition. The cytochrome c and lysates of SARS-CoV-2 (SLs) embedded in the interior hotspots were successfully functionalized to confine the electric fields and generate their optical fingerprint signals, respectively. Highly linear quantitative sensitivity was observed with the limit-of-detection value of 10-1 PFU/mL. The feasibility of detecting the targets in a bodily fluidic environment was also confirmed using the proposed templates with SLs in human saliva and nasopharyngeal swabs. These interior hotspots templated with the target analytes are highly desirable for early and on-site SERS diagnoses of infectious diseases without any labeling processes.
Assuntos
Técnicas Biossensoriais , COVID-19 , Viroses , Humanos , COVID-19/diagnóstico , SARS-CoV-2 , Análise Espectral RamanRESUMO
Engineering of interior hotspots provides a paradigm shift from traditional surface-enhanced Raman spectroscopy (SERS), in which the detection sensitivity depends on the positioning of adsorbed molecules. In the present work, we developed an Ag-Au bimetallic nanocomposite (SGBMNC) SERS platform with interior hotspots through facile chemical syntheses. Ag nanoparticles replaced by Au via the galvanic replacement reaction (GRR) provided hotspot regions inside the SGBMNC that remarkably enhanced the plasmonic activity compared to the conventional SERS platforms without the internal hotspots. The diffusion of analytes into the proposed interior hotspots during the GRR process enabled sensitive detections within 10 s. The SERS behaviors of the SGBMNC platform were investigated using methylene blue (MB) as a Raman probe dye. A quantitative study revealed excellent detection performance, with a limit of detection (LOD) of 42 pM for MB dye and a highly linear correlation between peak intensity and concentration (R2 ≥ 0.91). The SGBMNC platform also enabled the detection of toxic benzyl butyl phthalate with a sufficient LOD of 0.09 ppb (i.e., 280 pM). Therefore, we believe that the proposed methodology can be used for SERS assays of hazardous materials in practical fields.
Assuntos
Nanopartículas Metálicas , Nanocompostos , Ouro/química , Substâncias Perigosas , Nanopartículas Metálicas/química , Azul de Metileno , Prata/química , Análise Espectral Raman/métodosRESUMO
The sensitivity and limit-of-detection (LOD) of the traditional surface-enhanced Raman spectroscopy (SERS) platform suffer from the requirement of precise positioning of small analytes, including DNAs and bacteria, into narrow hotspots. In this study, a novel SERS sensor was developed using electrochemical deposition onto metal nanopillars (ECOMPs) combined with complementary DNAs (cDNAs) for the detection of pathogenic bacteria. Applying a redox potential to AuCl4- ions actively engineered the organometallic hotspots based on the cDNAs in a short time (<10 min) and simultaneously produced SERS signals. Because of the influence of potential-driven morphological properties on the SERS efficiency in the cDNA domains and the resonant coupling of internal fields with the fields confined between adjacent ECOMPs-cDNAs, the optimum growth time was determined to be 5 min. The EC-SERS detection and discrimination of Enterococcus faecium and Staphylococcus aureus were successfully carried out because of the DNA complementarity. Compared with plasmonic metal nanopillars (MPs)-cDNAs, the enhancement factor of the ECOMPs-cDNAs was estimated to be â¼2.0 × 103. A quantitative investigation revealed that a highly linear progression in the target DNA concentration range (0.05-100 nM) and a LOD of â¼0.035 nM were achieved. The specificity of the ECOMPs-cDNAs was validated by cross-hybridization. The platform was also used to assay human whole blood containing 0.1 nM bacterial DNAs. The proposed strategy provides the potential for highly sensitive SERS-based multiplex DNA detection in clinical diagnostics.
Assuntos
Técnicas Biossensoriais , Nanopartículas Metálicas , Técnicas Biossensoriais/métodos , DNA , DNA Bacteriano/genética , DNA Complementar , Ouro/química , Humanos , Nanopartículas Metálicas/química , Análise Espectral Raman/métodosRESUMO
Effective hotspot engineering with facile and cost-effective fabrication procedures is critical for the practical application of surface-enhanced Raman spectroscopy (SERS). We propose a SERS substrate composed of a metal film over polyimide nanopillars (MFPNs) with three-dimensional (3D) volumetric hotspots for this purpose. The 3D MFPNs were fabricated through a two-step process of maskless plasma etching and hydrogel encapsulation. The probe molecules dispersed in solution were highly concentrated in the 3D hydrogel networks, which provided a further enhancement of the SERS signals. SERS performance parameters such as the SERS enhancement factor, limit-of-detection, and signal reproducibility were investigated with Cyanine5 (Cy5) acid Raman dye solutions and were compared with those of hydrogel-free MFPNs with two-dimensional hotspots. The hydrogel-coated MFPNs enabled the reliable detection of Cy5 acid, even when the Cy5 concentration was as low as 100 pM. We believe that the 3D volumetric hotspots created by introducing a hydrogel layer onto plasmonic nanostructures demonstrate excellent potential for the sensitive and reproducible detection of toxic and hazardous molecules.
Assuntos
Carbocianinas/análise , Ouro/química , Prata/química , Hidrogéis , Limite de Detecção , Nanoestruturas , Reprodutibilidade dos Testes , Análise Espectral RamanRESUMO
We report on a quasi-three-dimensional (3D) plasmonic nanowell array with high structural uniformity for molecular detection. The quasi-3D plasmonic nanowell array was composed of periodic hexagonal Au nanowells whose surface is densely covered with gold nanoparticles (Au NPs), separated by an ultrathin dielectric interlayer. The uniform array of the Au nanowells was fabricated by nanoimprint lithography and deposition of Au thin film. A self-assembled monolayer (SAM) of perfluorodecanethiol (PFDT) was coated on the Au surface, on which Au was further deposited. Interestingly, the PFDT-coated Au nanowells were fully covered with Au NPs with an ultra-high density of 375 µm-2 rather than a smooth film due to the anti-wetting property of the low-energy surface. The plasmonic nanogaps formed among the high-density Au NPs led to a strong near-field enhancement via coupled localized surface plasmon resonance and produced a uniform surface-enhanced Raman spectroscopy (SERS) response with a small relative standard deviation of 5.3%. Importantly, the highly uniform nanostructure, featured by the nanoimprint lithography and 3D growth of densely-packed Au NPs, minimizes the spatial variation of Raman intensity, potentially providing quantitative analysis. Moreover, analyte molecules were highly concentrated and selectively deposited in nanowells when a water droplet containing the analyte was evaporated on the plasmonic substrate. The analyte formed a relatively thick overcoat in the nanowells near the triple line due to the coffee-ring effects. Combining 3D plasmonic nanowell substrates with molecular enrichments, highly sensitive detection of lactic acid was demonstrated. Given its combination of high sensitivity and signal uniformity, the quasi-3D plasmonic nanowell substrate is expected to provide a superior molecular detection platform for biosensing applications.
RESUMO
Cross-infection following cross-contamination is a serious social issue worldwide. Pathogens are normally spread by contact with germ-contaminated surfaces. Accordingly, antibacterial surface technologies are urgently needed and have consequently been actively developed in recent years. Among these technologies, biomimetic nanopatterned surfaces that physically kill adhering bacteria have attracted attraction as an effective technological solution to replace toxic chemical disinfectants (biocides). Herein, we introduce a transparent, colorless, and self-disinfecting polyethylene terephthalate (PET) film that mimics the surface structure of the Progomphus obscurus (sanddragon) wing physically killing the attached bacteria. The PET film was partially etched via a 4-min carbon tetrafluoride (CF4) plasma treatment. Compared to a flat bare PET film, the plasma-treated film surface exhibited a uniform array structure composed of nanopillars with a 30 nm diameter, 237 nm height, and 75 nm pitch. The plasma-treated PET film showed improvements in optical properties (transmittance and B*) and antibacterial effectiveness over the bare film; the transparency and colorlessness slightly increased, and the antibacterial activity increased from 53.8 to 100% for Staphylococcus aureus, and from 0 to 100% for Escherichia coli. These results demonstrated the feasibility of the CF4 plasma-treated PET film as a potential antibacterial overcoating with good optical properties.
RESUMO
Nanostructured materials offer the potential to drive future developments and applications of electrochemical devices, but are underutilized because their nanoscale cavities can impose mass transfer limitations that constrain electrochemical signal generation. Here, we report a new signal-generating mechanism that employs a molecular redox capacitor to enable nanostructured electrodes to amplify electrochemical signals even without an enhanced reactant mass transfer. The surface-tethered molecular redox capacitor engages diffusible reactants and products in redox-cycling reactions with the electrode. Such redox-cycling reactions are facilitated by the nanostructure that increases the probabilities of both reactant-electrode and product-redox-capacitor encounters (i.e., the nanoconfinement effect), resulting in substantial signal amplification. Using redox-capacitor-tethered Au nanopillar electrodes, we demonstrate improved sensitivity for measuring pyocyanin (bacterial metabolite). This study paves a new way of using nanostructured materials in electrochemical applications by engineering the reaction pathway within the nanoscale cavities of the materials.
Assuntos
Técnicas Eletroquímicas/métodos , Nanoestruturas/química , Nanotecnologia/métodos , Técnicas Eletroquímicas/instrumentação , Eletrodos , Compostos Ferrosos , Metalocenos , Nanotecnologia/instrumentação , Oxirredução , PiocianinaRESUMO
This paper reports a highly sensitive and selective surface-enhanced Raman spectroscopy (SERS) sensing platform. We used a simple fabrication method to generate plasmonic hotspots through a direct maskless plasma etching of a polymer surface and the surface tension-driven assembly of high aspect ratio Ag/polymer nanopillars. These collapsed plasmonic nanopillars produced an enhanced near-field interaction via coupled localized surface plasmon resonance. The high density of the small nanogaps yielded a high plasmonic detection performance, with an average SERS enhancement factor of 1.5 × 107. More importantly, we demonstrated that the encapsulation of plasmonic nanostructures within nanofiltration membranes allowed the selective filtration of small molecules based on the degree of membrane swelling in organic solvents and molecular size. Nanofiltration membrane-encapsulated SERS substrates do not require pretreatments. Therefore, they provide a simple and fast detection of toxic molecules using portable Raman spectroscopy.
RESUMO
A surface-enhanced Raman scattering (SERS) sensor comprising silver nanowires (AgNWs) and genetically engineered M13 bacteriophages expressing a tryptophan-histidine-tryptophan (WHW) peptide sequence (BPWHW) was fabricated by simple mixing of BPWHW and AgNW solutions, followed by vacuum filtration onto a glass-fiber filter paper (GFFP) membrane. The AgNWs stacked on the GFFP formed a high density of SERS-active hot spots at the points of nanowire intersections, and the surface-coated BPWHW functioned as a bioreceptor for selective pesticide detection. The BPWHW-functionalized AgNW (BPWHW/AgNW) sensor was characterized by scanning electron microscopy, confocal scanning fluorescence microscopy, atomic force microscopy, and Fourier transform infrared spectroscopy. The Raman signal enhancement and the selective pesticide SERS detection properties of the BPWHW/AgNW sensor were investigated in the presence of control substrates such as wild-type M13 bacteriophage-decorated AgNWs (BPWT/AgNW) and undecorated AgNWs (AgNW). The BPWHW/AgNW sensor exhibited a significantly higher capture capability for pesticides, especially paraquat (PQ), than the control SERS substrates, and it also showed a relatively higher selectivity for PQ than for other bipyridylium pesticides such as diquat and difenzoquat. Furthermore, as a field application test, PQ was detected on the surface of PQ-pretreated apple peels, and the results demonstrated the feasibility of using a paper-based SERS substrate for on-site residual pesticide detection. The developed M13 bacteriophage-functionalized AgNW SERS sensor might be applicable for the detection of various pesticides and chemicals through modification of the M13 bacteriophage surface peptide sequence.
Assuntos
Nanofios , Bacteriófago M13 , Praguicidas , Prata , Análise Espectral RamanRESUMO
We utilized a fast Raman spectral mapping technique for fast detection of bacterial pathogens. Three-dimensional (3D) plasmonic nanopillar arrays were fabricated using the nanolithography-free process consisting of maskless Ar plasma treatment of a polyethylene terephthalate substrate and subsequent metal deposition. Bacterial pathogens were immobilized on the positively charged poly(l-lysine)-coated 3D plasmonic substrate through electrostatic interactions. Then, the bacterial surfaces were selectively labeled with antibody-conjugated surface-enhanced Raman scattering (SERS) nanotags, and Raman mapping images were collected and statistically analyzed for quantitative analysis of bacteria. Salmonella typhimurium was selected as a model pathogen bacterium to confirm the efficacy of our SERS imaging technique. Minimum number of Raman mapping points with statistical reliability was determined to reduce assay time. It was possible to get a statistically reliable standard calibration curve for 529 pixels (laser spot with 60 µm interval), which required a total mapping time of 45 min to get a standard calibration curve for five different concentrations of bacteria in the 0 to 106 CFU/mL range. No amplification step was necessary for quantification because low-abundance target bacteria could be measured using the Raman spectral mapping technique. Therefore, this approach allows accurate quantification of bacterial pathogens without any culturing or enrichment process.
Assuntos
Nanoestruturas , Bactérias , Reprodutibilidade dos Testes , Análise Espectral RamanRESUMO
Developing a sensor that identifies and quantifies trace amounts of analyte molecules is crucially important for widespread applications, especially in the areas of chemical and biological detection. By non-invasively identifying the vibrational signatures of the target molecules, surface-enhanced Raman scattering (SERS) has been widely employed as a tool for molecular detection. Here, we report on the reproducible fabrication of wafer-scale dense SERS arrays and single-nanogap level near-field imaging of these dense arrays under ambient conditions. Plasmonic nanogaps densely populated the spaces among globular Ag nanoparticles with an areal density of 120 particles per µm2 upon application of a nanolithography-free simple process consisting of the Ar plasma treatment of a polyethylene terephthalate substrate and subsequent Ag sputter deposition. The compact nanogaps produced a high SERS enhancement factor of 3.3 × 107 and homogeneous (coefficient of variation of 8.1%) SERS response. The local near fields at these nanogaps were visualized using photo-induced force microscopy that simultaneously enabled near-field excitation and near-field force detection under ambient conditions. A high spatial resolution of 3.1 nm was achieved. Taken together, the generation of a large-area SERS array with dense plasmonic nanogaps and the subsequent single-nanogap level characterization of the local near field have profound implications in the nanoplasmonic imaging and sensing applications.
RESUMO
Advances in flexible optoelectronic devices have led to an increasing need for developing highly efficient, low-cost, flexible transparent conducting electrodes. Copper-based electrodes have been unattainable due to the relatively low optical transmission and poor oxidation resistance of copper. Here, we report the synthesis of a completely continuous, smooth copper ultra-thin film via limited copper oxidation with a trace amount of oxygen. The weakly oxidized copper thin film sandwiched between zinc oxide films exhibits good optoelectrical performance (an average transmittance of 83% over the visible spectral range of 400-800 nm and a sheet resistance of 9 Ω sq(-1)) and strong oxidation resistance. These values surpass those previously reported for copper-based electrodes; further, the record power conversion efficiency of 7.5% makes it clear that the use of an oxidized copper-based transparent electrode on a polymer substrate can provide an effective solution for the fabrication of flexible organic solar cells.
RESUMO
3D hybrid plasmonic nanomaterials are composed of 3D-stacked Ag nanowires and nanoparticles separated by a nanoscale-thick alumina interlayer. The 3D hybrid plasmonic nanostructures exhibit strong plasmonic coupling between the ultrahigh populations of plasmonic nanomaterials, overcoming the physical limitation of inefficient plasmonic coupling of the Ag nanowire stacks.