Effect on growth performance, carcass traits, and myostatin gene expression in Aseel chicken fed varied levels of dietary protein in isocaloric energy diets.

A study was conducted to assess the effect of feeding different crude protein (CP) levels with isocaloric metabolizable energy (ME) diets on growth performance, carcass traits, and myostatin (MSTN) gene expression of Aseel chicken during 0 to 16 weeks of age. A total of two hundred and ten day-old Aseel chickens were randomly allotted to seven dietary treatment groups. Each group had thirty chicks distributed into three replicates of ten chicks in each. Experimental diets were formulated to have varying levels of CP, viz. 18.5, 19.0, 19.5, 20.0, 20.5, 21.0, and 21.5%, with isocaloric energy of 2800 kcal ME/kg diets of mash feed fed to birds in a completely randomized design. Different CP levels had a significant effect (P < 0.05) on the body weight gain (BWG) of Aseel chicken. At the end of 16 weeks of age, the group fed 21% CP gained 223.53 g more than the lowest CP (18.5%)-fed group. The different CP levels did not significantly (P > 0.05) influenced the feed intake of all treatment groups, but numerically highest feed intake was observed in the lowest CP (18.5%)-fed group. However, significant differences in feed efficiency (FE) appeared from the 13th week only with the 21.0% CP-fed group showing the best FE until the 16th week (3.86 to 4.06). The maximum dressing % (70.61) was observed by the 21% CP-fed group. The CP 21% diet down-regulated the MSTN gene expression in breast muscle tissue to 0.07 folds when compared to the diet of CP 20%. The best economical coordinates for maximum performance for Aseel chicken appeared to be CP of 21% and ME of 2800 kcal/kg to achieve the best FE of 3.86 at the earliest age of 13 weeks. In conclusion, 21% CP in an isocaloric diet of 2800 kcal ME/kg, in Aseel chickens, would be optimum to improve the growth performance at maximum in terms of BWG and FE up to 16 weeks of age.

Advancements in MXene-Polymer Nanocomposites in Energy Storage and Biomedical Applications.

MXenes are 2D ceramic materials, especially carbides, nitrides, and carbonitrides derived from their parent 'MAX' phases by the etching out of 'A' and are famous due to their conducting, hydrophilic, biocompatible, and tunable properties. However, they are hardly stable in the outer environment, have low biodegradability, and have difficulty in drug release, etc., which are overcome by MXene/Polymer nanocomposites. The MXenes terminations on MXene transferred to the polymer after composite formation makes it more functional. With this, there is an increment in photothermal conversion efficiency for cancer therapy, higher antibacterial activity, biosensors, selectivity, bone regeneration, etc. The hydrophilic surfaces become conducting in the metallic range after the composite formation. MXenes can effectively be mixed with other materials like ceramics, metals, and polymers in the form of nanocomposites to get improved properties suitable for advanced applications. In this paper, we review different properties like electrical and mechanical, including capacitances, dielectric losses, etc., of nanocomposites more than those like Ti3C2Tx/polymer, Ti3C2/UHMWPE, MXene/PVA-KOH, Ti3C2Tx/PVA, etc. along with their applications mainly in energy storing and biomedical fields. Further, we have tried to enlist the MXene-based nanocomposites and compare them with conducting polymers and other nanocomposites. The performance under the NIR absorption seems more effective. The MXene-based nanocomposites are more significant in most cases than other nanocomposites for the antimicrobial agent, anticancer activity, drug delivery, bio-imaging, biosensors, micro-supercapacitors, etc. The limitations of the nanocomposites, along with possible solutions, are mentioned.

Erratum to 'General principles of regional anaesthesia in children' [BJA Education 19 (2019) 342-348].

[This corrects the article DOI: 10.1016/j.bjae.2019.06.003.].

Cholesterol and neurodegeneration: longitudinal changes in serum cholesterol biomarkers are associated with new lesions and gray matter atrophy in multiple sclerosis over 5 years of follow-up.

BACKGROUND AND PURPOSE: Cholesterol is an important structural component of myelin and essential for brain homeostasis. Our objective was to investigate whether longitudinal changes in cholesterol biomarkers are associated with neurodegeneration in multiple sclerosis (MS). METHODS: This prospective, longitudinal study (n = 154) included 41 healthy controls, 76 relapsing-remitting MS subjects and 37 progressive MS subjects. Neurological examination, brain magnetic resonance imaging and blood samples were obtained at baseline and at 5-year follow-up visits. Cholesterol biomarkers measured included plasma total cholesterol, high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol and the apolipoproteins ApoA-I, Apo-II, ApoB, ApoC-II and ApoE. Key cholesterol pathway single nucleotide polymorphisms were genotyped. RESULTS: Greater percentage increases in HDL-C and ApoA-I levels were associated with a lower rate of gray matter and cortical volume loss. Greater percentage increases in low-density lipoprotein cholesterol were associated with increases in new T2 lesions. The percentage increases in HDL-C (P = 0.032) and ApoA-I (P = 0.007) were smaller in patients with relapsing-remitting MS at baseline who converted to secondary progressive MS during the 5-year follow-up period. Changes in HDL-C and ApoA-I were associated with lipoprotein lipase rs328 genotype status. CONCLUSIONS: Increases in HDL-C and ApoA-I have protective associations with magnetic resonance imaging measures of neurodegeneration in MS.

Thermo-acoustic and FTIR studies on binary liquids mixture of ethyl oleate and benzaldehyde at 303.15 to 318.15 K.

Ultrasonic velocity, density and viscosity of two liquid mixtures ethyl oleate with benzaldehyde have been determined at various temperatures in the range of 303.15 to 318.15 K. The ultrasonic velocity, viscosity and density data are used to estimate adiabatic compressibility, free length, molar volume and free volume along with their excess values. The observed variations of the said parameters with concentration and temperature are discussed in terms of the intermolecular interactions between the unlike molecules of the binary mixtures. FT-IR spectra confirm the expected interactions.

Effect of strontium on Nd doped Ba1-x Sr x Ce0.65Zr0.25Nd0.1O3-δ proton conductor as an electrolyte for solid oxide fuel cells.

This paper investigated the Sr doping effect on the microstructure, chemical stability, and conductivity of Ba1-x Sr x Ce0.65Zr0.25Nd0.1O3-δ (0 â©½ x â©½ 0.2) electrolyte prepared by sol-gel method. The lattice constants and unit cell volumes were found to decrease as Sr atomic percentage increased in accordance with the Vegard law, confirming the formation of solid solution. Incorporation of Sr into the composition resulted in smaller grains besides suppressing the formation of secondary phases of SrCeO3. Among the synthesized samples BaCe0.65Zr0.25Nd0.1O3-δ pellet with orthorhombic structure showed highest conductivity with a value of 2.08 × 10-3 S/cm(dry air) and 2.12 × 10-3 S/cm (wet air with 3% relative humidity) at 500 °C due to its smaller lattice volume, larger grain size, and lower activation energy that led to excessive increase in conductivity. Ba0.8Sr0.2Ce0.65Zr0.25Nd0.1O3-δ recorded lower conductivity with a value of 4.62 × 10-4 S/cm (dry air) and 4.83 × 10-4 S/cm (wet air with 3% relative humidity) at 500 °C than Sr undoped but exhibited better chemical stability when exposed to air and H2O atmospheres. Comparisons with the literature showed the importance of the synthesis method on the properties of the powders. Hence this composition can be a promising electrolyte if all the values such as sintering temperature, Sr dopant concentration, and time are proportionally controlled.

Level monitoring system with pulsating sensor--application to online level monitoring of dashpots in a fast breeder reactor.

An innovative continuous type liquid level monitoring system constructed by using a new class of sensor, viz., pulsating sensor, is presented. This device is of industrial grade and it is exclusively used for level monitoring of any non conducting liquid. This instrument of unique design is suitable for high resolution online monitoring of oil level in dashpots of a sodium-cooled fast breeder reactor. The sensing probe is of capacitance type robust probe consisting of a number of rectangular mirror polished stainless steel (SS-304) plates separated with uniform gaps. The performance of this novel instrument has been thoroughly investigated. The precision, sensitivity, response time, and the lowest detection limit in measurement using this device are <0.01 mm, ∼100 Hz/mm, ∼1 s, and ∼0.03 mm, respectively. The influence of temperature on liquid level is studied and the temperature compensation is provided in the instrument. The instrument qualified all recommended tests, such as environmental, electromagnetic interference and electromagnetic compatibility, and seismic tests prior to its deployment in nuclear reactor. With the evolution of this level measurement approach, it is possible to provide dashpot oil level sensors in fast breeder reactor for the first time for continuous measurement of oil level in dashpots of Control & Safety Rod Drive Mechanism during reactor operation.

Suicidal ingestion of potassium permanganate crystals: a rare encounter.

Potassium permanganate poisoning is not common. Although Symptoms of potassium permanganate ingestion are gastrointestinal and Complications due to ingestion of potassium permanganate include cardiovascular depression, hepatic and renal damage, upper airway obstruction, bleeding tendency and methemoglobinemia. Gastric damage due to potassium permanganate has rarely been reported previously. We are reporting a 34-year old female patient who presented to our Emergency Department after suicidal ingestion of potassium permanganate crystals. After treatment, the patient was discharged home on the 8(th) day after admission. So we conclude that Emergency endoscopy has a significant role in diagnosis and management of potassium permanganate ingestion.

Identification, isolation and characterization of process related impurities in ezetimibe.

During the synthesis of ezetimibe, two process related impurities were detected were HPLC analysis at levels ranging from 0.05 to 0.8%. These two impurities were isolated by column chromatography and co-injected with ezetimibe sample to confirm the retention times in HPLC. These two impurities were characterized as 2-(4-hydroxybenzyl)-N,5-bis(4-fluorophenyl) pentanamide (impurity-I) and 1-(4-fluorophenyl)-3(3-(4-fluorophenyl)propyl)-4-(4-hydroxyphenyl)azetidin-2-one (impurity-II). Isolation, structural elucidation of these impurities by spectral data ((1)H NMR, (13)C NMR, MS and IR) and probable mechanism of their formation have been discussed.

Abrikossoff's Tumor: An Unusual Presentation.

Abrikossoff's tumor or granular cell tumor is an infrequent benign neoplasm, first described by the Russian pathologist Abrikossoff in 1926. The neoplasm can affect all parts of the body with head and neck areas affected in 45-65% of patients. More than half of the head and neck lesions are localized to the oral cavity, especially the tongue. An aggressive malignant form of granular cell myoblastoma that metastasizes is rare. The treatment of choice of Abrikossoff's tumor is local surgical excision with a wide margin. Here, we present a case of Abrikossoff's tumor, occurring in the upper arm, presenting as a panniculitis-like lesion.

A novel approach towards development of real time chemical dosimetry using pulsating sensor-based instrumentation.

The paper presents an innovative approach towards development of real time dosimetry using a chemical dosimeter for measurement of absorbed radiation dose in the range between 1 and 400 Gy. Saturated chloroform solution in water, a well known chemical dosimeter, is used to demonstrate the concept of online measurement of radiation dose. The measurement approach involves online monitoring of increase in conductivity of saturated chloroform solution due to progressive build up of traces of highly conducting HCl during exposure to gamma irradiation. A high performance pulsating sensor-based conductivity monitoring instrument has been used to monitor such real time change in conductivity of solution. A relation between conductivity shift and radiation dose has been established using radiochemical yield value (G value) of HCl. The G value of HCl in saturated chloroform dosimeter has been determined using laboratory developed pulsating sensor-based devices. In this connection dose rate of Co-60 gamma chamber was determined using Fricke dosimeter following a simple potentiometric measurement approach developed in-house besides conventional spectrophotometry. Results obtained from both measurement approaches agreed well. Complete instrumentation package has also been developed to measure real time radiation dose. The proposed real time radiation dosimeter is successfully tested in several measurement campaigns in order to assure its performance prior to its deployment in field.

A novel approach for high precision rapid potentiometric titrations: application to hydrazine assay.

We propose a high precision rapid personal computer (PC) based potentiometric titration technique using a specially designed mini-cell to carry out redox titrations for assay of chemicals in quality control laboratories attached to industrial, R&D, and nuclear establishments. Using this technique a few microlitre of sample (50-100 µl) in a total volume of ~2 ml solution can be titrated and the waste generated after titration is extremely low comparing to that obtained from the conventional titration technique. The entire titration including online data acquisition followed by immediate offline analysis of data to get information about concentration of unknown sample is completed within a couple of minutes (about 2 min). This facility has been created using a new class of sensors, viz., pulsating sensors developed in-house. The basic concept in designing such instrument and the salient features of the titration device are presented in this paper. The performance of the titration facility was examined by conducting some of the high resolution redox titrations using dilute solutions--hydrazine against KIO(3) in HCl medium, Fe(II) against Ce(IV) and uranium using Davies-Gray method. The precision of titrations using this innovative approach lies between 0.048% and 1.0% relative standard deviation in different redox titrations. With the evolution of this rapid PC based titrator it was possible to develop a simple but high precision potentiometric titration technique for quick determination of hydrazine in nuclear fuel dissolver solution in the context of reprocessing of spent nuclear fuel in fast breeder reactors.

High performance conductivity monitoring instrument with pulsating sensor.

We present an unconventional but high performance pulsating conductivity monitoring instrument constructed by using a new class of sensor, viz., pulsating sensor developed in house. The design consists of a special type of logic gate oscillator (LGO) powered by 5 V direct current (dc). The conductivity cell constitutes a part of LGO. In this conductivity meter the primary signal generated from the sensor is directly in digital domain which is easily transmitted either to a personal computer or to a stand-alone embedded system. Hence it reduces the hardware components making the instrumentation highly simplified. The output of the instrument is pulse frequency which is directly related to the conductivity of solution used for measurement. The relation between pulse frequency and conductivity is determined following a multipoint calibration technique developed in our laboratory using a series of KCl standards. The performance of the instrument is demonstrated with a few examples which reveal the diverse application of this new approach of measurement technique.

Pulsating potentiometric titration technique for assay of dissolved oxygen in water at trace level.

A simple but high performance potentiometric titration technique using pulsating sensors has been developed for assay of dissolved oxygen (DO) in water samples down to 10.0 microg L(-1) levels. The technique involves Winkler titration chemistry, commonly used for determination of dissolved oxygen in water at mg L(-1) levels, with modification in methodology for accurate detection of end point even at 10.0 microg L(-1) levels DO present in the sample. An indigenously built sampling cum pretreatment vessel has been deployed for collection and chemical fixing of dissolved oxygen in water samples from flowing water line without exposure to air. A potentiometric titration facility using pulsating sensors developed in-house is used to carry out titration. The power of the titration technique has been realised in estimation of very dilute solution of iodine equivalent to 10 microg L(-1) O(2). Finally, several water samples containing dissolved oxygen from mg L(-1) to microg L(-1) levels were successfully analysed with excellent reproducibility using this new technique. The precision in measurement of DO in water at 10 microg L(-1) O(2) level is 0.14 (n=5), RSD: 1.4%. Probably for the first time a potentiometric titration technique has been successfully deployed for assay of dissolved oxygen in water samples at 10 microg L(-1) levels.

Single-fiber grid for improved spatial resolution in distributed fiber optic sensor.

The spatial resolution of an optical-fiber-based Raman distributed temperature sensor is limited by the pulse width of the laser used. We discuss a methodology of increasing spatial resolution by using a single-fiber grid. Spatial resolution improvement of up to 10 times is demonstrated.

Tobacco consumption among adolescents in rural Wardha: where and how tobacco control should focus its attention?

OBJECTIVES: The objectives of the present study were to study the pattern of tobacco use among rural adolescents (15-19 years) and to find out reasons for use and non use of tobacco products. MATERIALS AND METHODS: In the present community-based research, triangulation of qualitative (free list, focus group discussions) and quantitative methods (survey) was undertaken. The study was carried out in surrounding 11 villages of the Kasturba Rural Health Training Centre, Anji during January 2008 where 385 adolescents were selected by simple random sampling and interviewed by house to house visits. After survey, six focus group discussions were undertaken with adolescent boys. RESULTS: About 68.3% boys and 12.4% girls had consumed any tobacco products in last 30 days. Out of boys who had consumed tobacco, 79.2% consumed kharra, and 46.4% consumed gutka. Among boys, 51.2% consumed it due to peer pressure, 35.2% consumed tobacco as they felt better, and five percent consumed tobacco to ease abdominal complaints and dental problem. Among girls, 72% used dry snuff for teeth cleaning, 32% and 20% consumed tobacco in the form of gutka and tobacco & lime respectively. The reasons for non use of tobacco among girls were fear of cancer (59%), poor oral health (37.9%). Among non consuming boys it was fear of cancer (58.6%), poor oral health (44.8%) and fear of getting addiction (29.3%). According to FGD respondents, few adolescent boys taste tobacco by 8-10 years of age, while girls do it by 12-13 years. Peer pressure acts as a pro tobacco influence among boys who are outgoing and spend more time with their friends. They prefer to consume freshly prepared kharra which was supposed to be less strong (tej) than gutka. Tobacco is being used in treatment of some health problems. Tobacco is chewed after meals for better digestion, given to ease toothache, pain in abdomen and to induce vomiting in suicidal insecticide poisoning. CONCLUSION: The current consumption of any tobacco products among rural adolescents was found very high. Hence, the multi-pronged intervention strategy is needed to tackle the problem.

Incidence of Haemophilus influenzae type b meningitis in India.

BACKGROUND & OBJECTIVE: Vaccine policy depends on locally relevant disease burden estimates. The incidence of Haemophilus influenzae type b (Hib) disease is not well characterized in the South Asian region, home to 30 per cent of the world's children. There are limited data from prospective population incidence studies of Hib in Asia, and no data available from India. We therefore carried out this study to assess the burden of Hib meningitis in India. METHODS: A prospective surveillance study was carried out during 1997 and 1999 in hospitals for cases of Hib meningitis from 5 administrative areas of an Indian district (Vellore, Tamil Nadu) with 56,153 children under 5 yr of age, over a 24 month period RESULTS: Ninety seven cases of possible meningitis (> 10 WBC/microl in CSF) were reported, an annual incidence of 86 per 100,000 (95%CI 69 to 109) in 0-4 yr old children, and 357 per 100,000 in 0-11 month infants. Eighteen had proven bacterial meningitis, an annual incidence of 15.9 per 100,000. Eight CSF had Hib by culture or antigen testing, an annual incidence of 7.1 per 100,000 (95%CI 3.1 to 14.0) in children 0-59 months. In infants 0-11 months of age, the incidence of Hib meningitis was 32 per 100,000 (95%CI 16 to 67) and in the 0-23 month group it was 19 (95%CI 8 to 37). INTERPRETATION & CONCLUSION: Our data are the first minimal estimate of the incidence of Hib meningitis for Indian children. The observed incidence data are similar to European reports before Hib vaccine use, suggest substantial disease before 24 months of age, and provide data useful for policy regarding Hib immunization.

Unmeasured anions in children after cardiac surgery.

OBJECTIVES: Acidosis caused by increased unmeasured anion levels occurs frequently after cardiac surgery, with uncertain significance. We examined the ability of unmeasured anions and lactate to predict major events after cardiac surgery, in addition to lactate/increased unmeasured anion levels during low cardiac output states. METHODS: In the initial 6 months, all patients admitted after cardiac surgery were enrolled. Arterial samples were taken at 0, 4, 8, 12, 24, and 36 hours postoperatively. The Stewart method was used to calculate excess acid and unmeasured anion levels. Major adverse events were defined as low cardiac output states requiring cardiac massage or mechanical support. In the second 6-month period, data were collected from a further 8 infants during cardiac arrest/extracorporeal membrane oxygenation cannulation. RESULTS: One hundred thirteen patients were analyzed. Major adverse events occurred in 8 (7.1%) of 113 patients. On admission, metabolic acidosis occurred in 94 of 113 samples: lactate alone (n = 25); mixed lactate and unmeasured anions (n = 44); and unmeasured anions alone (n = 25). All of the patients who experienced major adverse events had unmeasured anion levels of greater than 3 mEq/L on admission. Initial unmeasured anion levels were significantly higher in those infants with major adverse events (10.6 mEq/L [standard deviation, 8.2 mEq/L] vs 4.8 mEq/L [standard deviation, 6.6 mEq/L], P = .024). Lactate levels did not differ between the 2 groups. In the 16 patients sampled during major adverse events, metabolic acidosis occurred in 15 of 16, with a mean excess acid level of 14.9 mEq/L (standard deviation, 8.3 mEq/L). Although unmeasured anions made a significant contribution, lactate was the predominant acid. CONCLUSIONS: After cardiac surgery, unmeasured anion levels were significantly higher in those children with major adverse events. The greatest risk of major adverse events was found in children with both increased lactate levels and increased unmeasured anion levels on admission.