Elucidating Primary Degradation Mechanisms in High-Cycling-Capacity, Compositionally Tunable High-Entropy Hydrides.

The hydrogen sorption properties of single-phase bcc (TiVNb)100-xCrx alloys (x = 0-35) are reported. All alloys absorb hydrogen quickly at 25 °C, forming fcc hydrides with storage capacity depending on the Cr content. A thermodynamic destabilization of the fcc hydride is observed with increasing Cr concentration, which agrees well with previous compositional machine learning models for metal hydride thermodynamics. The steric effect or repulsive interactions between Cr-H might be responsible for this behavior. The cycling performances of the TiVNbCr alloy show an initial decrease in capacity, which cannot be explained by a structural change. Pair distribution function analysis of the total X-ray scattering on the first and last cycled hydrides demonstrated an average random fcc structure without lattice distortion at short-range order. If the as-cast alloy contains a very low density of defects, the first hydrogen absorption introduces dislocations and vacancies that cumulate into small vacancy clusters, as revealed by positron annihilation spectroscopy. Finally, the main reason for the capacity drop seems to be due to dislocations formed during cycling, while the presence of vacancy clusters might be related to the lattice relaxation. Having identified the major contribution to the capacity loss, compositional modifications to the TiVNbCr system can now be explored that minimize defect formation and maximize material cycling performance.

Synthesis and Characterization of a Trigonal Layered Compound AgInS2.

Depending on thermal and pressure conditions, AgInS2 exhibits various crystal structures. In this study, we synthesized a high-purity polycrystalline sample of trigonal AgInS2, which is a layered compound, using a high-pressure synthesis technique. The crystal structure was investigated by synchrotron powder X-ray diffraction and the Rietveld refinement. On the basis of band calculation, X-ray photoelectron spectroscopy, and electrical resistance measurements, we found that the obtained trigonal AgInS2 is a semiconductor. Temperature dependencies of electrical resistance of AgInS2 were measured by a diamond anvil cell up to 31.2 GPa. Although semiconducting behavior was suppressed with pressure, metallic behavior was not observed within the pressure range investigated in this study.

Hydrogen Absorption Reactions of Hydrogen Storage Alloy LaNi5 under High Pressure.

Hydrogen can be stored in the interstitial sites of the lattices of intermetallic compounds. To date, intermetallic compound LaNi5 or related LaNi5-based alloys are known to be practical hydrogen storage materials owing to their higher volumetric hydrogen densities, making them a compact hydrogen storage method and allowing stable reversible hydrogen absorption and desorption reactions to take place at room temperature below 1.0 MPa. By contrast, gravimetric hydrogen density is required for key improvements (e.g., gravimetric hydrogen density of LaNi5: 1.38 mass%). Although hydrogen storage materials have typically been evaluated for their hydrogen storage properties below 10 MPa, reactions between hydrogen and materials can be facilitated above 1 GPa because the chemical potential of hydrogen dramatically increases at a higher pressure. This indicates that high-pressure experiments above 1 GPa could clarify the latent hydrogen absorption reactions below 10 MPa and potentially explore new hydride phases. In this study, we investigated the hydrogen absorption reaction of LaNi5 above 1 GPa at room temperature to understand their potential hydrogen storage capacities. The high-pressure experiments on LaNi5 with and without an internal hydrogen source (BH3NH3) were performed using a multi-anvil-type high-pressure apparatus, and the reactions were observed using in situ synchrotron radiation X-ray diffraction with an energy dispersive method. The results showed that 2.07 mass% hydrogen was absorbed by LaNi5 at 6 GPa. Considering the unit cell volume expansion, the estimated hydrogen storage capacity could be 1.5 times higher than that obtained from hydrogen absorption reaction below 1.0 MPa at 303 K. Thus, 33% of the available interstitial sites in LaNi5 remained unoccupied by hydrogen atoms under conventional conditions. Although the hydrogen-absorbed LaNi5Hx (x < 9) was maintained below 573 K at 10 GPa, LaNi5Hx began decomposing into NiH, and the formation of a new phase was observed at 873 K and 10 GPa. The new phase was indexed to a hexagonal or trigonal unit cell with a ≈ 4.44 Å and c ≈ 8.44 Å. Further, the newly-formed phase was speculated to be a new hydride phase because the Bragg peak positions and unit cell parameters were inconsistent with those reported for the La-Ni intermetallic compounds and La-Ni hydride phases.

Robustness of superconductivity to external pressure in high-entropy-alloy-type metal telluride AgInSnPbBiTe5.

High-entropy-alloy (HEA) superconductors are a new class of disordered superconductors. However, commonality of superconducting characteristics of HEA materials is unclear. Here, we have investigated the crystal and electronic structure, and the robustness of superconducting states in a HEA-type metal telluride (MTe; M = Ag, In, Sn, Pb, Bi) under high pressure, and the results were compared with the pressure effects for a middle-entropy system (AgPbBiTe3) and a reference system of PbTe. When the crystal structure is CsCl-type, all phases show superconductivity under high pressure but exhibit different pressure dependences of the transition temperature (Tc). For PbTe, its Tc decreases with pressure. In contrast, the Tc of HEA-type AgInSnPbBiTe5 is almost independent of pressure, for pressures ranging from 13.0 to 35.1 GPa. Those results suggest that the robustness of superconductivity to external pressure is linked to the configurational entropy of mixing at the M site in MTe. Since the trend is quite similar to previous work on a HEA (Ti-Zr-Hf-Nb-Ta), where the robustness of superconductivity was observed up to ~ 200 GPa, we propose that the robustness of superconductivity under high pressure would be a universal feature in HEA-type superconductors.

Synthesis and Characterization of High-Entropy-Alloy-Type Layered Telluride MBi2Te4 (M = Ag, In, Sn, Pb, Bi).

Recently, high-entropy alloys (HEAs) and HEA-type compounds have been extensively studied in the fields of material science and engineering. In this article, we report on the synthesis of a layered system MBi2Te4 where the M site possesses low-, middle-, and high-entropy states. The samples with M = Pb, Ag1/3Pb1/3Bi1/3, and Ag1/5In1/5Sn1/5Pb1/5Bi1/5 were newly synthesized and the crystal structure was examined by synchrotron X-ray diffraction and Rietveld refinement. We found that the M-Te2 distance was systematically compressed with decreasing lattice constants, where the configurational entropy of mixing at the M site is also systematically increased. The details of structural refinements and the electrical transport property are presented.

Size effect of the guest cation on the AlO4 framework in aluminate sodalite-type oxides M8[Al12O24](SO4)2 (M = Sr2+ and Ca2+) in the I43m phase.

Sr8[Al12O24](SO4)2 (SAS) and Ca8[Al12O24](SO4)2 (CAS) are members of the aluminate sodalite-type oxides with the general chemical formula M8[Al12O24](XO4)2 (M2+ is the guest cation and XO42- is the guest anion). To discuss the role of the guest cations (M2+ = Sr2+ and Ca2+) on the rotation of AlO4 in the oxygen tetrahedral framework in the I43m phase, the crystal structure parameters and the probability density function of the guest ions in SAS and CAS have been investigated via synchrotron radiation X-ray powder diffraction by considering Gram-Charlier expansions. The interatomic distances between the M2+ and O2- ions evaluated from the maximum positions in the probability density distribution are almost equal to the sum of the ideal ionic radii of the M2+ and O2- ions. This result suggests that the geometry of the AlO4 tetrahedral framework and the fluctuation of the guest ions are mainly caused by steric effects between the M2+ and O2- ions.

Structural Transition with a Sharp Change in the Electrical Resistivity and Spin-Orbit Mott Insulating State in a Rhenium Oxide, Sr3Re2O9.

We report the successful synthesis, crystal structure, and electrical properties of Sr3Re2O9, which contains Re6+ with the 5d1 configuration. This compound is isostructural with Ba3Re2O9 and shows a first-order structural phase transition at ∼370 K. The low-temperature (LT) phase crystallizes in a hettotype structure of Ba3Re2O9, which is different from that of the LT phase of Sr3W2O9, suggesting that the electronic state of Re6+ plays an important role in determining the crystal structure of the LT phase. The structural transition is accompanied by a sharp change in the electrical resistivity. This is likely a metal-insulator transition, as suggested by the electronic band calculation and magnetic susceptibility. In the LT phase, the ReO6 octahedra are rotated in a pseudo-a0a0a+ manner in Glazer notation, which corresponds to C-type orbital ordering. Paramagnetic dipole moments were confirmed to exist in the LT phase by muon spin rotation and relaxation measurements. However, the dipole moments shrink greatly because of the strong spin-orbit coupling in the Re ions. Thus, the electronic state of the LT phase corresponds to a Mott insulating state with strong spin-orbit interactions at the Re sites.

Antiferroelectric to Antiferroelectric-Relaxor Phase Transition in Calcium Strontium Sulfoaluminate.

Structural phase transitions of calcium strontium sulfoaluminate series, (Ca1-xSrx)8[AlO2]12(SO4)2 ((CS)AS-x) with x = 0.80-1.00, are systematically investigated by powder X-ray diffraction, dielectric measurements, and pyroelectric measurements, to clarify a phase diagram of (CS)AS-x (x = 0.80-1.00). A pure strontium sulfoaluminate, (CS)AS-1.00, is found to undergo three phase transitions, which take place successively on cooling from a prototypical cubic phase with the symmetry of Im3̅m. Though the room-temperature phase of (CS)AS-1.00 was previously reported to be of polar Pcc2, the pyroelectric measurements clarified a nonpolar character of the crystal symmetry. The dielectric measurements suggest a possibility of an antiferroelectric ground state of (CS)AS-x in the Sr-rich compositions. As x decreases, the ground state changes to a short-range-ordered state, implying a unique phase transition from the antiferroelectric state to the antiferroelectric-relaxor state. The present study provides an intriguing playground for designing new ferro/antiferroelectric materials.

Simple method to detect triclofos and its metabolites in plasma of children by combined use of liquid chromatography tandem-mass spectrometry and gas chromatography-mass spectrometry.

Triclofos sodium (TCS) and chloral hydrate (CH) are widely used as sedatives for children, but no analytical method to simultaneously monitor concentrations of blood TCS, CH and their metabolites, trichloroacetic acid (TCA) and trichloroethanol (TCEOH), has been reported. The present study aimed to develop a simple analytical method for TCS and its metabolites (TCA, TCEOH and CH) in small-volume plasma from children. After acidification of specimens, TCS formic acid adduct or the metabolites derivatized using water/sulfuric acid/methanol (6:5:1, v/v) were measured by combined use of liquid chromatography tandem-mass spectrometry and gas chromatography mass-spectrometry. The limits of detection and quantification levels (µg/ml) were 0.10 and 0.29 for TCS, 0.24 and 0.72 for TCA, 0.10 and 0.31 for TCEOH, and 0.25 and 0.76 for CH, respectively. The mean recoveries were 82.8-107% for TCS, 85.4-101% for TCA, 91.6-107% for TCEOH, and 88.9-109% for CH. Within-run and between-run precision (percent of relative standard deviation, %RSD) using this method ranged from 1.1 to 15.7% and 3.6 to 13.5%, respectively, for TCS and all of its metabolites. The calibration curves were obtained with standard spiked plasma, and all of the coefficients of determination were more than 0.975. Subsequently, we applied the present method to plasma taken from five children after sedation induced by CH and TCS. In addition to TCS and CH, elevated TCA and TCEOH concentrations were detected. This new method can be applied for the pharmacokinetic analysis of TCS and its metabolites and the determination of the optimal TCS dosage in children.