RESUMO
Macrophages are the primary cell type orchestrating bioresorbable vascular graft (BVG) remodeling and infiltrate from three sources: the adjacent native vessel, circulating blood, and transmural migration from outer surface of the graft. To elucidate the kinetics of macrophage infiltration into the BVG, we fabricated two different bilayer arterial BVGs consisting of a macroporous sponge layer and a microporous electrospun (ES) layer. The Outer ES graft was designed to reduce transmural cell infiltration from the outer surface and the Inner ES graft was designed to reduce cell infiltration from the circulation. These BVGs were implanted in mice as infrarenal abdominal aorta grafts and extracted at 1, 4, and 8 weeks (n = 5, 10, and 10 per group, respectively) for evaluation. Cell migration into BVGs was higher in the Inner ES graft than in the Outer ES graft. For Inner ES grafts, the majority of macrophage largely expressed a pro-inflammatory M1 phenotype but gradually changed to tissue-remodeling M2 macrophages. In contrast, in Outer ES grafts macrophages primarily maintained an M1 phenotype. The luminal surface endothelialized faster in the Inner ES graft; however, the smooth muscle cell layer was thicker in the Outer ES graft. Collagen fibers were more abundant and matured faster in the Inner ES graft than that in the Outer ES graft. In conclusion, compared to macrophages infiltrating from the circulating blood, transmural macrophages from outside promote the acute inflammatory-mediated response for vascular remodeling and subsequent collagen deposition within BVGs. STATEMENT OF SIGNIFICANCE: To elucidate the kinetics of macrophage infiltration into the bioresorbable vascular graft (BVG), two different bilayer arterial BVGs were implanted in mice as infrarenal abdominal aorta grafts. Cell migration into BVGs was higher in the inner electrospun graft which cells mainly infiltrate from outer surface than in the outer electrospun graft which cells mainly infiltrate from the circulating blood. In the inner electrospun grafts, the majority of macrophages changed from the M1 phenotype to the M2 phenotype, however, outer electrospun grafts maintained the M1 phenotype. Collagen fibers matured faster in the Inner electrospun graft. Compared to macrophages infiltrating from the circulating blood, transmural macrophages from outside promote the acute inflammatory-mediated response for vascular remodeling and subsequent collagen deposition within BVGs.
Assuntos
Implantes Absorvíveis , Prótese Vascular , Movimento Celular , Colágeno , Inflamação , Macrófagos , Remodelação Vascular , Animais , Macrófagos/metabolismo , Macrófagos/patologia , Camundongos , Inflamação/patologia , Camundongos Endogâmicos C57BL , Masculino , Aorta Abdominal/patologiaRESUMO
In the development of small-diameter vascular grafts, it is crucial to achieve early-stage endothelialization to prevent thrombus formation and intimal hyperplasia. Silk fibroin (SF) from Bombyx mori is commonly used for such grafts. However, there is a need to expedite endothelialization post-implantation. In this study, we functionalized SF with Arg-Glu-Asp-Val (REDV) (SF + REDV) using cyanuric chloride to enhance endothelialization. The immobilization of REDV onto SF was confirmed and the amount of immobilized REDV could be calculated by 1H NMR. Furthermore, the conformational changes in Tyr, Ser, and Ala residues in [3-13C]Tyr- and [3-13C]Ser-SF due to REDV immobilization were monitored using 13C solid-state NMR. The REDV immobilized onto the SF film was found to be exposed on the film's surface, as confirmed by biotin-avidin system. Cell culture experiments, including adhesiveness, proliferation, and extensibility, were conducted using normal human umbilical vein endothelial cells (HUVEC) and normal human aortic smooth muscle cells (HAoSMC) on both SF and SF + REDV films to evaluate the impact of REDV on endothelialization. The results indicated a trend towards promoting HUVEC proliferation while inhibiting HAoSMC proliferation. Therefore, these findings suggest that SF + REDV may be more suitable than SF alone for coating small-diameter SF knitted tubes made of SF threads.
Assuntos
Bombyx , Fibroínas , Animais , Humanos , Fibroínas/química , Bombyx/química , Células Endoteliais , Peptídeos/química , Espectroscopia de Ressonância Magnética/métodos , SedaRESUMO
We have developed a functionalized silk fibroin (BSF) that can serve as an improved fundamental material for dressings by specifically capturing growth factors secreted during the healing process and supplying them to cells accumulated in the wound area to enhance the tissue regeneration efficiency. When considering the design of heparin-modified BSF, there is a difficulty with binding to high-molecular-weight polysaccharides without disrupting the hydrophobic crystalline structure of the BSF. In this study, a low-molecular-weight pharmaceutical heparin, dalteparin, was selected and cross-linked with the tyrosine residue presence in the BSF non-crystalline region. When targeting 3D porous applications like nanofiber sheets, as it is crucial not only to enhance biological activity but also to improve handling by maintaining stability in water and mechanical strength, a trade-off between improved cell affinity and reduced mechanical strength depending on crystalline structure was evaluated. The use of dalteparin maintained the mechanical strength better than unfractionated heparin by reducing the effect on disturbing BSF recrystallization. Film surface hydrophilicity and cell proliferation induction were significantly higher in the dalteparin group. For BSF functionalization, using purified heparin was an effective approach that achieved a balance between preserving the mechanical properties and induction of tissue regeneration, offering the potential for various forms in the future.
RESUMO
Animal-derived xenogeneic biomaterials utilized in different surgeries are promising for various applications in tissue engineering. However, tissue decellularization is necessary to attain a bioactive extracellular matrix (ECM) that can be safely transplanted. The main objective of the present study is to assess the structural integrity, biocompatibility, and potential use of various acellular biomaterials for tissue engineering applications. Hence, a bovine pericardium (BP), porcine pericardium (PP), and porcine tunica vaginalis (PTV) were decellularized using a Trypsin, Triton X (TX), and sodium dodecyl sulfate (SDS) (Trypsin + TX + SDS) protocol. The results reveal effective elimination of the cellular antigens with preservation of the ECM integrity confirmed via staining and electron microscopy. The elasticity of the decellularized PP (DPP) was markedly (p < 0.0001) increased. The tensile strength of DBP, and DPP was not affected after decellularization. All decellularized tissues were biocompatible with persistent growth of the adipose stem cells over 30 days. The staining confirmed cell adherence either to the peripheries of the materials or within their matrices. Moreover, the in vivo investigation confirmed the biocompatibility and degradability of the decellularized scaffolds. Conclusively, Trypsin + TX + SDS is a successful new protocol for tissue decellularization. Moreover, decellularized pericardia and tunica vaginalis are promising scaffolds for the engineering of different tissues with higher potential for the use of DPP in cardiovascular applications and DBP and DPTV in the reconstruction of higher-stress-bearing abdominal walls.
RESUMO
Silk fibroin (SF) has attracted attention as a base biomaterial that could be suitable in many applications because of its shape and structure. Highly functional SF has been developed to promote tissue regeneration with heparin conjugation. However, the hydrophobic three-dimensional structure of SF makes it difficult to bind to high-molecular-weight and hydrophilic compounds such as heparin. In this study, sufficient heparin modification was achieved using tyrosine residues as reaction points to improve cellular response. As it was considered that there was a trade-off between the improvement of water wettability and cell responsiveness induced by heparin modification, influences on the structure, and mechanical properties, the structure and physical properties of the SF conjugated with heparin were extensively evaluated. Results showed that increased amounts of heparin modification raised heparin content and water wettability on film surfaces even though SF formation was not inhibited. In addition, the proliferation of endothelial cells and fibroblasts were enhanced when a surface with sufficient heparin assumed its potential in assisting wound healing. This research emphasizes the importance of material design focusing on the crystal structure inherent in SF in the development of functionalized SF materials.
RESUMO
Bioabsorbable arterial grafts can potentially improve patency and neovessel formation; however, their application in clinical settings has not been realized. In this study, we developed bioabsorbable gradient sheets based on silk fibroin (SF) and polyvinyl alcohol (PVA) with a core-shell nanofibrous structure. This gradient sheet was expected to promote vascular remodeling while we maintained its physical properties and a gradual degrading process from the luminal surface. ESP was conducted at various flow rates for SF and PVA to achieve the multilayer gradient structure. Furthermore, the elasticity of the gradient sheet could be increased by increasing the PVA flow rate; however, this reduced the tensile strength of the core-shell fibers. Notably, the physical properties of the gradient sheet did not degrade even after 7 days of immersion in a phosphate buffer saline solution, which indicates that the structure could maintain its structural integrity while resisting arterial pressure. In vitro experiments revealed that the number of endothelial cells attached to the SF/PVA sheet was notably higher than that on the cell-culture dish. The gradient sheets were implanted in rat abdominal aortas and explanted after 14 days to confirm acute-phase patency and vascular remodeling. The gradient sheets constructed with SF composed of polyurethane and PVA improved the ease of handling of the material, and these sheets resulted in a favorable vascular remodeling outcome. Our results strongly suggest that the SF/PVA-based gradient sheets described in this study can serve as a novel design for bioabsorbable arterial grafts upon further modifications.
Assuntos
Fibroínas , Nanofibras , Implantes Absorvíveis , Animais , Células Endoteliais , Fibroínas/química , Nanofibras/química , Álcool de Polivinil/química , Ratos , Seda/químicaRESUMO
Medical sheets are useful in surgically repair vascular disease. To avoid long-term side effects, they are to be replaced with regenerated tissue after implantation. Silk fibroin is a fibrous protein secreted by silkworm. The advantage of silk fibroin is its biocompatibility and has been used as regenerative artificial materials. The problem of its biodegradability is that the effect is time consuming. In this study, SVVYGLR peptide was used to expect promoting cell migration and accelerating the biodegradation of silk fibroin. Silk fibroin and polyurethane-based medical sheets with or without SVVYGLR peptide were implanted in rat abdominal aorta (silk fibroin/polyurethane/SVVYGLR peptide versus silk fibroin/polyurethane). The result of histological evaluation indicated that the new cell layer created under both sheets was composed of endothelial cells, smooth muscle, and fibroin in both sheets and similar to a native vessel. Both sheets did not show any excessive inflammation or calcification, and moderate biodegradability was observed. The decrease of silk fibroin indicated the biodegradability of all sheets. Silk fibroin/polyurethane/SVVYGLR peptide had many small vessels in the regenerated tissue than silk fibroin/polyurethane. This appearance indicated that SVVYGLR peptide promoted the angiogenesis in the regenerative tissue. This study suggested that SVVYGLR peptide could give the angiogenic-promoting activity to silk fibroin-based vascular repairing sheet.
Assuntos
Fibroínas , Animais , Células Endoteliais , Oligopeptídeos , Poliuretanos , Ratos , SedaRESUMO
PURPOSE: To understand the complication and histopathological characteristics between the Silk Fibroin/Polyurethanes (SF/PU) and the host response, and to unveil the compatibility of the patch in diabetes individuals. METHODS: Rats were divided into DM and control (CT) groups, and the DM group was induced with streptozotocin. All groups underwent the SF/PU patch implantation in the abdominal aorta, and the implanted patches were evaluated at one, two, three, and four weeks after implantation. RESULTS: DM group had more fibrosis formation and a delayed endothelialization compared to the CT group. There was no evidence of chronic inflammation in both DM and CT groups. CONCLUSIONS: Fibrosis in hyperglycemic individuals could promote the formation of new vascular structures in the implanted patch such as endothelial and vascular smooth muscle cells. In summary, the SF/PU patch was no serious complications when implanted under hyperglycemia, and the patch was suitable to implant in diabetes mellitus.
Assuntos
Materiais Biocompatíveis/química , Fibroínas/química , Poliuretanos/química , Seda/química , Animais , Vasos Sanguíneos , Hiperglicemia , Masculino , Teste de Materiais , Ratos , Ratos Sprague-Dawley , Engenharia TecidualRESUMO
Silk fibroin (SF) produced by the domesticated wild silkworm, Samia cynthia ricini (S. c. ricini) is attracting increasing interest owing to its unique mechanical properties, biocompatibility, and abundance in nature. However, its utilization is limited, largely due to lack of appropriate processing strategies. Various strategies have been assessed to regenerate cocoon SF, as well as the use of aqueous liquid fibroin (LFaq) prepared by dissolution of silk dope obtained from the silk glands of mature silkworm larvae in water. However, films cast from these fibroin solutions in water or organic solvents are often water-soluble and require post-treatment to render them water-stable. Here, we present a strategy for fabrication of water-stable films from S. c. ricini silk gland fibroin (SGF) without post-treatment. Aqueous ethanol induced gelation of fibroin in the posterior silk glands (PSG), enabling its separation from the rest of the silk gland. When dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), the SGF-gel gave a solution from which a transparent, flexible, and water-insoluble film (SGFHFIP) was cast. Detailed structural characterization of the SGFHFIP as-cast film was carried out and compared to a conventional, water-soluble film cast from LFaq. FTIR and 13C solid-state NMR analyses revealed both cast films to be α-helix-rich. However, gelation of SGF induced by the 40%-EtOH-treatment resulted in an imperfect ß-sheet structure. As a result, the SGF-gel was soluble in HFIP, but some ß-sheet structural memory remains, and the SGFHFIP as-cast film obtained has some ß-sheet content which renders it water-resistant. These results reveal a structure water-solubility relationship in S. c. ricini SF films that may offer useful insights towards tunable fabrication of novel biomaterials. A plausible model of the mechanism that leads to the difference in water resistance of the two kinds of α-helix-rich films is proposed.
Assuntos
Bombyx/química , Fibroínas/química , Propanóis/química , Água/química , Aminoácidos/análise , Animais , Varredura Diferencial de Calorimetria , Espectroscopia de Ressonância Magnética Nuclear de Carbono-13 , Conformação Proteica em alfa-Hélice , Solubilidade , Soluções , Espectroscopia de Infravermelho com Transformada de Fourier , Termogravimetria , Difração de Raios XRESUMO
Formation of the α-helical conformation in the poly-l-alanine (PA) sequence regions, subsequent structural transition to ß-sheet during natural spinning, and presence of residual α-helices in Samia cynthia ricini (S. c. ricini) native silk fiber have been experimentally proven. However, the aggregation state of the residual α-helices, and their influence on the mechanical deformation behavior in native fiber remain unclear. Here we show that the α-helices form an ordered aggregation state with a hexagonal packing in the aqueous solution, some of which remain during natural spinning. X-ray scattering and differential scanning calorimetry (DSC) analyses revealed occurrence of a structural transition of the residual α-helices to the ß-sheet structure, accompanied by disappearance of the plateau region in the force-strain curve, due to heat-treatment at ~220 °C. On the basis of X-ray scattering before and after tensile stretching of S. c. ricini native silk, a direct connection between the plateau region and the α-helix to ß-sheet structural transition was confirmed. Our findings demonstrate the importance of the PA sequence regions in fiber structure formation and their influence on the tensile deformation behavior of S. c. ricini silk, features believed to be essentially similar in other saturniid silks. We strongly believe the residual ordered α-helices to be strategically and systematically designed by S. c. ricini silkworms to impart flexibility in native silk fiber. We anticipate that these knowledge forms a basis for fruitful strategies in the design and development of amino acid sequences for artificial silks with desired mechanical properties.
Assuntos
Bombyx/química , Fibroínas/ultraestrutura , Peptídeos/química , Agregados Proteicos , Animais , Bombyx/fisiologia , Fibroínas/isolamento & purificação , Temperatura Alta , Larva/química , Larva/fisiologia , Teste de Materiais , Peptídeos/isolamento & purificação , Maleabilidade , Conformação Proteica em alfa-Hélice , Conformação Proteica em Folha beta , Resistência à TraçãoRESUMO
SF/polyurethane composite non-woven sheet was fabricated to evaluate the cardiovascular tissue engineering materials in the wet state. The compatibility and microstructure analyses were carried out on the fabricated SF/polyurethane composite non-woven sheet by thermal analysis and solid-state NMR analysis in the wet state. To evaluate the modulus of elasticity, a tensile test was performed and supported with dynamic viscoelasticity and mechanical analysis. Results showed that SF/polyurethane composites form domains within the non-woven sheet and are in a finely dispersed state while maintaining their structures at a scale of several tens of nm. Moreover, an increase of the loss tangent with low elastic modulus proved that a micromolecular interaction occurs between silk fibroin (SF) and polyurethane molecules.
RESUMO
PURPOSE: The surgical sheets that are currently used for congenital cardiovascular surgery have several drawbacks, including material deterioration, calcification, and pseudo-intimal proliferation resulting in hemodynamic disturbance. The aim of this study was to evaluate a newly developed sheet made from a combination of silk fibroin (SF) and a synthetic polymer, thermoplastic polyurethane (TPU), for surgical use. METHODS: The hybrid SF/TPU sheet was a non-woven fabric with nanofibers that was made using the electrospinning method. The mechanical properties of the SF/TPU sheet were characterized. To determine its biocompatibility, part of the wall of the canine descending aorta was replaced with a SF/TPU sheet as a patch. The patches were removed after 3 months and a histological examination was performed. RESULTS: The flexibility, water permeability, and suture retention strength of the SF/TPU sheet were excellent and equivalent to those of existing sheets. The SF/TPU sheet had excellent handling properties and fit well into the vascular wall without needle hole bleeding. The histological examination revealed that the intimal tissue was restored well over the intraluminal surface of the explanted SF/TPU sheet, the absence of calcium deposition, and minimal inflammatory reaction, without signs of degradation. CONCLUSION: The SF/TPU sheet had excellent mechanical properties and tissue biocompatibility. These favorable features and possible biodegradability of the SF portion warrant a long-term follow-up study.
Assuntos
Implante de Prótese Vascular/métodos , Procedimentos Cirúrgicos Cardiovasculares/métodos , Fibroínas , Nanofibras , Poliuretanos , Seda , Animais , Aorta Torácica/cirurgia , Materiais Biocompatíveis , Cães , ElasticidadeRESUMO
Life-threatening cardiovascular anomalies require surgery for structural repair with cardiovascular patches. The biomaterial patch, derived from Bombyx mori silk fibroin (SF), is used as an alternative material due to its excellent tissue affinity and biocompatibility. However, SF lacks the elastomeric characteristics required for a cardiovascular patch. In order to overcome this shortcoming, we combined the thermoplastic polyurethane, Pellethane® (PU) with SF to develop an elastic biocompatible patch. Therefore, the purpose of this study was to investigate the feasibility of the blended SF/PU patch in a vascular model. Additionally, we focused on the effects of different SF concentrations in the SF/PU patch on its biological and physical properties. Three patches of different compositions (SF, SF7PU3 and SF4PU6) were created using an electrospinning method. Each patch type (n = 18) was implanted into rat abdominal aorta and histopathology was assessed at 1, 3, and 6 months post-implantation. The results showed that with increasing SF content the tensile strength and elasticity decreased. Histological evaluation revealed that inflammation gradually decreased in the SF7PU3 and SF patches throughout the study period. At 6 months post-implantation, the SF7PU3 patch demonstrated progressive remodeling, including significantly higher tissue infiltration, elastogenesis and endothelialization compared with SF4PU6. In conclusion, an increase of SF concentration in the SF/PU patch had effects on vascular remodeling and physical properties. Moreover, our blended patch might be an attractive alternative material that could induce the growth of a neo-artery composed of tissue present in native artery.
Assuntos
Prótese Vascular , Fibroínas/química , Poliuretanos/química , Seda/química , Remodelação Vascular , Animais , Materiais Biocompatíveis/química , Adesão Celular , Masculino , Teste de Materiais , Ratos , Ratos Sprague-DawleyRESUMO
Patch grafts are widely used in various kind of vascular surgeries such as detect repair or dilation of vascular stenosis. Expanded polytetrafluoroethylene (ePTFE) patches are flexible and handle well, but have shown problems with calcification as they are non-bioabsorbable and therefore permanently remain in the body. It is important to develop an alternative biocompatible patch. Silk fibroin (SF) was developed as a biocompatible material, but it lacks of the elasticity required for surgery as a patch. Polyurethane (PU) is also a well-known elastomer so this study focused on the SF and the PU blend materials with a weight ratio of 5:5 (SF/PU). To evaluate the SF/PU patch, the patches were implanted into the abdominal aortas of rats, using the ePTFE patch in the control group. Because it was more flexible the SF/PU patch was easier to implant than the ePTFE patch. At 1 week after implantation, the SF/PU patch had been infiltrated with cells and collagen fiber. The ePTFE control patch did not accumulate collagen fiber until 3 months and calcification occurred at 4 weeks. The SF/PU patch did not present any signs of calcification for 3 months. This study addressed the problems associated with using SF in isolation and showed that the SF/PU patch can be considered as a useful alternative to the ePTFE to overcome the problem of calcification.
Assuntos
Aorta Abdominal/efeitos dos fármacos , Prótese Vascular , Vasos Sanguíneos/efeitos dos fármacos , Fibroínas/química , Poliuretanos/química , Animais , Aorta Abdominal/fisiologia , Materiais Biocompatíveis/química , Vasos Sanguíneos/fisiologia , Bombyx , Calcinose , Colágeno/química , Elasticidade , Inflamação , Masculino , Teste de Materiais , Desenho de Prótese , Ratos , Ratos Sprague-Dawley , Túnica Média/fisiologiaRESUMO
Samia cynthia ricini (S. c. ricini) is one of the wild silkworms. Their silk fibroins have been paid attention as potentially valuable biomedical materials as well as Bombyx mori silk fibroins, but detailed information on the packing arrangement of the fibers is still not currently well understood at a molecular level. In this study, 34 mer model peptides, GGAGGGYGGDGG(A)12GGAGDGYGAG with different 13C labeled positions have been synthesized as a typical sequence of the primary structure of S. c. ricini silk fibroins made up of tandemly repeated sequences of polyalanine as the crystalline region and glycin-rich sequences as the non-crystalline region. The heterogeneous structure was obtained from the determination of the fraction of several conformations depending on the position of the Ala residue by 13C cross polarization/magic angle spinning NMR. The packing arrangement was studied by 13C dipolar assisted rotational resonance NMR and packing in a staggered arrangement rather than a rectangular arrangement of this peptide with an anti-parallel ß-sheet structure was clarified, which is in good agreement with our previous report on the packing arrangement of (Ala)7 with an anti-parallel ß-sheet structure.
Assuntos
Bombyx/metabolismo , Fibroínas/química , Peptídeos/química , Sequência de Aminoácidos , Animais , Isótopos de Carbono/química , Marcação por Isótopo , Simulação de Dinâmica Molecular , Ressonância Magnética Nuclear Biomolecular , Peptídeos/síntese química , Estrutura Secundária de Proteína , Seda/químicaRESUMO
Films from silk fibroin protein are one of the most promising biomaterials because of their exquisite balance between mechanical properties and biocompatibility. Numerous schemes have been proposed for processing fibroin film, utilizing liquid silk fibroin (LSF) or regenerated silk fibroin (RSF). The films cast from LSF or RSF in the solution state are water-soluble, and therefore require postproduction treatment inducing ß-sheet formation, to render them insoluble in water. Many kinds of postproduction treatments, using alcohol-water solution, water vapor, or controlled temperature, have been developed. However, the tuning and reproducibility of such treatments are quite sensitive and frequently render the fibroin films less flexible or even brittle because of the formation of an over content of ß-sheet. To overcome this, we developed a novel scheme for fibroin processing using silk-gland fibroin (SGF). The essence of this scheme is to create a softly solidified fibroin-gel state of the silk glands with an imperfect ß-sheet structure, by treating them with an ethanol/water mixture. Such a fibroin gel was found to dissolve in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP). The SGF film cast from the HFIP solution shows a flexible and water-insoluble nature with high reproducibility. In addition to this improvement, the SGF film produced by this method contains a significantly low level of residual HFIP molecules compared to the traditional RSF films prepared from an HFIP solution. The mechanism underlying these advantageous characteristics was investigated from the structural viewpoint, by using techniques such as 13C solid-state NMR, differential scanning calorimetry, and wide-angle X-ray diffraction.
RESUMO
Amyloid A (AA) amyloidosis can be induced by the administration of amyloid fibrils to animals under inflammatory conditions. Silk fibroin (SF) is a main component protein of bombic silk and has amyloid-like features. The amyloidogenesis of SF solution in mice has been previously reported. Recently, the biochemical properties of silk have attracted increasing attention, and research and development have been undertaken regarding applications other than as a clothing material. However, the risk of AA amyloidosis from exposure to SF-related products is unknown. In this study, we examined the amyloidogenesis of several SF-related products that vary in preparation method or route of injection in a mouse model of amyloidosis. The results revealed that amyloid deposits were rarely observed in mice exposed to SF solution or feed supplemented with SF powder. On the other hand, heavy amyloid deposits were observed in some mice implanted with SF non-woven fabric by abdominal operation. Congo red staining of SF solutions under polarized light and electron microscopy indicated that SF solution in this study had no amyloid-like structures. We found that SF-related products occasionally promote amyloidogenesis, but have a low potential for amyloidosis.
Assuntos
Amiloide/química , Amiloidose/etiologia , Fibroínas/efeitos adversos , Animais , Vermelho Congo/química , Modelos Animais de Doenças , Feminino , Masculino , Camundongos , Camundongos Endogâmicos C3H , Camundongos Endogâmicos DBA , Pós , Proteína Amiloide A Sérica/químicaRESUMO
Interest in vascular grafts has recently grown because more patients are undergoing procedures that involve these grafts. However, smaller grafts with diameters <6 mm made from conventional biomaterials are associated with a high incidence of thrombosis, and therefore the development of improved materials suitable for small vascular grafts is highly desirable. In this paper, four kinds of recombinant Bombyx mori silk fibroins were prepared using transgenic techniques for use as silk vascular graft with a diameter of <6 mm. The peptide sequence TS(CDPGYIGSRAS)8 derived from the laminin B1 chain or the combination of two kinds of sequences, TS(CDPGYIGSRAS)8 and (TGRGDSPAS)8 derived from fibronectin, was incorporated into the light (L)-chain or the heavy (H)-chain of the silk fibroin. The fractions of the incorporated peptide sequences range from 0.8% to 7.2% by weight in the recombinant silk fibroins. This incorporation causes a very small increase in the random coil fraction of silk fibroin and a decrease in the tensile strength. Compared with native silk fibroin, the adhesive activities of mouse endothelial and smooth muscle cells increase significantly with the recombinant silk fibroin films incorporating only the TS(CDPGYIGSRAS)8 sequence independent of the L- or H-chains. A similar tendency was observed for the high migration activities of the endothelial cells in vitro and also the longer migration distance of the endothelial cell from the anastomotic part of rat abdominal aorta in vivo when this recombinant silk fibroin was used as a coating material for the silk graft. In view of the results, the recombinant silk fibroin incorporating the laminin peptide sequence can be potentially used as a vascular graft material.
RESUMO
Bombyx mori silk fibroin (SF) shows remarkably earlier calcification than bovine serum albumin, indicating advantage of the SF scaffold for bone regeneration. We provide evidence for the first time, that SF not only activate early differentiation markers of osteoblasts, but also activate expression of the late differentiation markers.