RESUMO
Due to the considerable potential of ultra-compact and highly integrated meta-optics, multi-functional metasurfaces have attracted great attention. The mergence of nanoimprinting and holography is one of the fascinating study areas for image display and information masking in meta-devices. However, existing methods rely on layering and enclosing, where many resonators combine various functions effectively at the expense of efficiency, design complication, and complex fabrication. To overcome these limitations, a novel technique for a tri-operational metasurface has been suggested by merging PB phase-based helicity-multiplexing and Malus's law of intensity modulation. To the best of our knowledge, this technique resolves the extreme-mapping issue in a single-sized scheme without increasing the complexity of the nanostructures. For proof of concept, a multi-functional metasurface built of single-sized zinc sulfide (ZnS) nanobricks is developed to demonstrate the viability of simultaneous control of near and far-field operations. The proposed metasurface successfully verifies the implementation of a multi-functional design strategy with conventional single-resonator geometry by reproducing two high-fidelity images in the far field and projecting one nanoimprinting image in the near field. This makes the proposed information multiplexing technique a potential candidate for many high-end and multi-fold optical storage, information-switching, and anti-counterfeiting applications.
RESUMO
Metasurfaces have shown remarkable potential to manipulate many of light's intrinsic properties, such as phase, amplitude, and polarization. Recent advancements in nanofabrication technologies and persistent efforts from the research community result in the realization of highly efficient, broadband, and multifunctional metasurfaces. Simultaneous control of these characteristics in a single-layered metasurface will be an apparent technological extension. Here, we demonstrate a broadband multifunctional metasurface platform with the unprecedented ability to independently control the phase profile for two orthogonal polarization states of incident light over dual-wavelength spectra (ultraviolet to visible). In this work, multiple single-layered metasurfaces composed of bandgap-engineered silicon nitride nanoantennas are designed, fabricated, and optically characterized to demonstrate broadband multifunctional light manipulation ability, including structured beam generation and meta-interferometer implementation. We envision the presented metasurface platform opening new avenues for broadband multifunctional applications including ultraviolet-visible spectroscopy, spatially modulated illumination microscopy, optical data storage, and information encoding.
RESUMO
The efficient control of optical light at the nanoscale level attracts marvelous applications, including thermal imaging, energy harvesting, thermal photovoltaics, etc. These applications demand a high-bandwidth, thermally robust, angularly stable, and miniaturized absorber, which is a key challenge to be addressed. So, in this study, the simple and cost-effective solution to attain a high-bandwidth nanostructured absorber is demonstrated. The designed nanoscale absorber is composed of a simple and plain circular ring of nickel metal, which possesses many interesting features, including a miniaturized geometry, easily fabricable design, large operational bandwidth, and polarization insensitivity, over the previously presented absorbers. The proposed nanoscale absorber manifests an average absorption of 93% over a broad optical window from 400 to 2800 nm. Moreover, the detailed analysis of the absorption characteristics is also performed by exciting the optical light's various incident and polarization angles. From the examined outcome, it is concluded that the nanostructured absorber maintains its average absorption of 80% at oblique incident angles in a broad wavelength range from 400 to 2800 nm. Owing to its appealing functionalities, such as the large bandwidth, simple geometry, low cost, polarization insensitivity, and thermal robustness of the constituting metal, nickel (Ni), this nano-absorber is made as an alternative for the applications of energy harvesting, thermal photovoltaics, and emission.
RESUMO
Multi-functional metasurfaces have attracted great attention due to the significant possibilities to realize highly integrated and ultra-compact meta-devices. Merging nano-printing and holographic information multiplexing is one of the effective ways to achieve multi-functionality, and such a merger can increase the information encoding capacity. However, the current approaches rely on stacking layers and interleaving, where multiple resonators effectively combine different functionalities on the cost of efficiency, design complexity, and challenging fabrication. To address such challenges, a single meta-nanoresonator-based tri-functional metasurface is proposed by combining the geometric phase-based spin-decoupling and Malus's law intensity modulation. The proposed strategy effectively improves information capacity owing to the orientation degeneracy of spin-decoupling rather than layer stacking or super-cell designs. To validate the proposed strategy, a metasurface demonstrating two helicity-dependent holographic outputs is presented in far-field, whereas a continuous nano-printing image is in near-field. It is also employed on CMOS-compatible and cost-effective hydrogen amorphous silicon providing transparent responses for the whole visible band. As a result, the proposed metasurface has high transmission efficiency in the visible regime and verifies the design strategy without adding extra complexities to conventional nano-pillar geometry. Therefore, the proposed metasurface opens new avenues in multi-functional meta-devices design and has promising applications in anti-counterfeiting, optical storage and displays.â.
RESUMO
The remarkable potential of metasurface holography promises revolutionary advancements for imaging, chip-integrated augmented/virtual reality (AR/VR) technology, and flat optical displays. The choice of constituent element geometry constrains many potential applications purveyed through polarization-independent optical response. The limited capabilities and degree of freedoms in commonly used meta-atoms restrict the design flexibility to break the conventional trade-off between polarization-insensitivity and bandwidth. Here, we propose a geometric phase-enabled novel design strategy to break this conventional trade-off. The proposed strategy ensures the realization of broad-band polarization-insensitivity through a simplified design procedure. An identical output wavefront manipulation is achieved by adjusting the phase delay freedom of geometric phase engineering under different incident polarization conditions. For proof of concept, a metahologram device is fabricated by an optimized complementary metal-oxide-semiconductor (CMOS)-compatible material of hydrogenated amorphous silicon (a-Si:H). This metahologram device reproduces the required hologram with high image fidelity and efficiency under different polarization scenarios of white light incidence. Due to the simple design strategy, low computational cost, and easy fabrication, the proposed technique can be an excellent candidate for realizing polarization-insensitive metahologram devices.
RESUMO
Secure packaging and transportation of light-sensitive chemical and biomedical test tubes are crucial for environmental protection and public health. Benefiting from the compact form factor and high efficiency of optical metasurfaces, we propose a broad-band polarization-insensitive flexible metasurface for the security of sensitive packages in the transport industry. We employ both the propagation and the geometric phase of novel TiO2 resin-based anisotropic nanoresonators to demonstrate a flexible and broad-band polarization-insensitive metasurface in the visible domain. The ultraviolet nanoimprint lithographic technique (UV-NIL) is used to fabricate high-index TiO2 nanoparticle-embedded-resin (nano-PER) structures that are patterned on a flexible substrate. This novel approach provides swift single-step fabrication without secondary fabrication steps such as deposition and etching. Moreover, replicating and transforming patterns over flexible substrates make the proposed technique highly suitable for large-throughput commercial manufacturing. As the proposed metahologram manifests high transmission efficiency in the visible domain, such flexible metaholographic platforms could find several exciting applications in bendable/curved displays, wearable devices, and holographic labeling for interactive displays.
RESUMO
Terahertz (THz) metamaterial absorbers have realized a prodigious reputation due to the limitation of natural absorbing materials in this range. Getting wideband absorption characteristics is challenging and arduous, especially in the THz band. Self-similar repeated fractal elements offer a promising solution to attain broadband absorption response due to their inherent multiple resonance characteristics. Therefore, by captivating the advantage of fractal geometry, we proposed a dual and wideband meta-absorber operating in the THz regime. The metamaterial absorber design comprises the assembly of self-similar square-shaped blocks arranged in a specific pattern to construct the fractal geometry. The proposed THz absorber demonstrates 90% absorption under normal incident waves for two operating bands from 9.5-10.55 THz and 12.3-13.35 THz. The suggested metamaterial absorber also shows good and stable absorption responses under different oblique incidence angles for transverse electric (TE) and transverse magnetic (TM) wave polarization. Moreover, this absorber manifests over 85% absorptivity in its entire operating range (9-14 THz) under the incidence angle of 60° and 70° for TM mode. Furthermore, it gives a polarization-insensitive behavior under the effect of different polarization angles. This kind of wideband absorber catches fascinating applications in THz detection, imaging, cloaking, and optoelectronic devices.
RESUMO
Helicity-multiplexed metasurfaces based on symmetric spin-orbit interactions (SOIs) have practical limits because they cannot provide central-symmetric holographic imaging. Asymmetric SOIs can effectively address such limitations, with several exciting applications in various fields ranging from asymmetric data inscription in communications to dual side displays in smart mobile devices. Low-loss dielectric materials provide an excellent platform for realizing such exotic phenomena efficiently. In this paper, we demonstrate an asymmetric SOI-dependent transmission-type metasurface in the visible domain using hydrogenated amorphous silicon (a-Si:H) nanoresonators. The proposed design approach is equipped with an additional degree of freedom in designing bi-directional helicity-multiplexed metasurfaces by breaking the conventional limit imposed by the symmetric SOI in half employment of metasurfaces for one circular handedness. Two on-axis, distinct wavefronts are produced with high transmission efficiencies, demonstrating the concept of asymmetric wavefront generation in two antiparallel directions. Additionally, the CMOS compatibility of a-Si:H makes it a cost-effective alternative to gallium nitride (GaN) and titanium dioxide (TiO2) for visible light. The cost-effective fabrication and simplicity of the proposed design technique provide an excellent candidate for high-efficiency, multifunctional, and chip-integrated demonstration of various phenomena.