Niobium-based single-atom catalyst promoted fractionation of lignocellulose in choline chloride-lactic acid deep eutectic solvent.

Pretreatment is the key step to convert lignocelluloses to sustainable biofuels, biochemicals or biomaterials. In this study, a green pretreatment method based on choline chloride-lactic acid deep eutectic solvent (ChCl-LA) and niobium-based single-atom catalyst (Nb/CN) was developed for the fractionation of corn straw and further enzymatic hydrolysis of cellulose. With this strategy, significant lignin removal of 96.5 % could be achieved when corn straw was pretreated by ChCl-LA (1:2) DES over Nb/CN under 120 °C for 6 h. Enzymatic hydrolysis of the cellulose-enriched fraction (CEF) presented high glucose yield of 92.7 % and xylose yield of 67.5 %. In-depth investigations verified that the high yields of fractions and monosaccharides was attributed to the preliminary fractionation by DES and the deep fractionation by Nb/CN. Significantly, compared to other reported soluble catalysts, the synthesized single-atom catalyst displayed excellent reusability by simple filtration and enzymatic hydrolysis. The recyclability experiments showed that the combination of ChCl-LA DES and Nb/CN could be repeated at least three times for corn straw fractionation, moreover, the combination displayed remarkable feedstock adaptability.

Surface-Enhanced Raman Spectroscopy for Monitoring the Biochemical Changes Due to DNA Mutations Induced by CRISPR-Cas9 Genome Editing in the Aspergillus niger Fungus.

In this study, surface-enhanced Raman spectroscopy (SERS) technique, along with principal component analysis (PCA) and partial least-squares discriminant analysis (PLS-DA), is used as a simple, quick, and cost-effective analysis method for identifying biochemical changes occurring due to induced mutations in the Aspergillus niger fungus strain. The goal of this study is to identify the biochemical changes in the mutated fungal cells (cell mass) as compared to the control/nonmutated cells. Furthermore, multivariate data analysis tools, including PCA and PLS-DA, are used to further confirm the differentiating SERS spectral features among fungal samples. The mutations are caused in A. niger by the clustered regularly interspaced palindromic repeat CRISPR-Cas9 genomic editing method to improve their biotechnological potential for the production of cellulase enzyme. SERS was employed to detect the changes in the cells of mutated A. niger fungal strains, including one mutant producing low levels of an enzyme and another mutant producing high levels of the enzyme as a result of mutation as compared with an unmutated fungal strain as a control sample. The distinctive features of SERS corresponding to nucleic acids and proteins appear at 546, 622, 655, 738, 802, 835, 959, 1025, 1157, 1245, 1331, 1398, and 1469 cm-1. Furthermore, PLS-DA is used to confirm the 89% accuracy, 87.7% precision, 87% sensitivity, and 88.9% specificity of this method, and the value of the area under the curve (AUROC) is 0.67. It has been shown that surface-enhanced Raman spectroscopy is an effective method for identifying and differentiating biochemical changes in genome-modified fungal samples.

Surface-enhanced Raman spectroscopy for characterization of filtrates of blood serum samples from patients with tuberculosis obtained by 50 kDa filtration devices.

The ability of surface-enhanced Raman spectroscopy (SERS) to generate spectroscopic fingerprints has made it an emerging tool for biomedical applications. The objective of this study is to confirm the potential use of Raman spectroscopy for early disease diagnosis based on blood serum. In this study, a total of sixty blood serum samples, consisting of forty from diseased patients and twenty (controls) from healthy individuals, was used. Because disease biomarkers, found in the lower molecular weight fraction, are suppressed by higher molecular weight proteins, 50 kDa Amicon ultrafiltration centrifugation devices were used to produce two fractions from whole blood serum consisting of a filtrate, which is a low molecular weight fraction, and a residue, which is a high molecular weight fraction. These fractions were then analyzed, and their SERS spectral data were compared with those of healthy fractions. The SERS technique was utilized on blood serum, filtrate and residue of patients with tuberculosis to identify characteristic SERS spectral features associated with the development of disease, which can be used to differentiate them from healthy samples using silver nanoparticles as a SERS substrate. For further analysis, the effective chemometric technique of principal component analysis (PCA) was used to qualitatively differentiate all the analyzed samples based on their SERS spectral features. Partial least squares discriminant analysis (PLS-DA) accurately classified the filtrate portions of healthy and tuberculosis samples with 97% accuracy, 97% specificity, 98% sensitivity, and an area under the receiver operating characteristic (AUROC) curve of 0.74.

Surface enhanced Raman spectroscopy for the characterization of the metabolites of the biodesulfurization of dibenzothiophene carried out by Tsukamurella paurometabola.

Large amount of sulphur is released by the combustion of fossil fuels in the form of SoX which affects human health and leads to acid rain. To overcome this issue, it is essential to eliminate sulphur moieties from heterocyclic organo-sulphur compounds like Dibenzothiophene (DBT) present in the petrol. In this study Surface enhanced Raman scattering (SERS) spectroscopy is used to analyze the desulfurizing activity of Tsukamurella paurometabola bacterial strain. The most prominent SERS peaks observed at 791, 837, 944 and 1032 cm-1, associated to C-S stretching, are solely observed in dibenzothiophene and its metabolite-I (DBTS) but absent in 2-Hydroxybiphenyl (metabolite-II) and extraction sample of supernatant as a result of biodesulfurization. Moreover, the SERS peaks observed at 974 (characteristic peak of benzene ring) and 1015 cm-1 is associated to C-C ring breathing while 1642 and 1655 cm-1 assigned to CC bonds of aromatic ring. These peaks are only observed in 2-Hydroxybiphenyl (metabolite-II) and extraction sample of supernatant as a result of biodesulfurization. Notably, these peaks are absent in the Dibenzothiophene and its metabolite-I which indicate that aromatic ring is carrying sulfur in this fraction. Moreover, multivariate data analytical tools like principal component analysis (PCA) and PCA-loadings are applied to further differentiate between dibenzothiophene and its metabolites that are Dibenzothiophene sulphone (metabolite-I) and 2-Hydroxybiphenyl (metabolite-II).

Surface-enhanced Raman spectroscopy for the characterization of bacterial pellets of Staphylococcus aureus infected by bacteriophage.

Drug-resistant pathogenic bacteria are a major cause of infectious diseases in the world and they have become a major threat through the reduced efficacy of developed antibiotics. This issue can be addressed by using bacteriophages, which can kill lethal bacteria and prevent them from causing infections. Surface-enhanced Raman spectroscopy (SERS) is a promising technique for studying the degradation of infectious bacteria by the interaction of bacteriophages to break the vicious cycle of drug-resistant bacteria and help to develop chemotherapy-independent remedial strategies. The phage (viruses)-sensitive Staphylococcus aureus (S. aureus) bacteria are exposed to bacteriophages (Siphoviridae family) in the time frame from 0 min (control) to 50 minutes with intervals of 5 minutes and characterized by SERS using silver nanoparticles as SERS substrate. This allows us to explore the effects of the bacteriophages against lethal bacteria (S. aureus) at different time intervals. The differentiating SERS bands are observed at 575 (C-C skeletal mode), 620 (phenylalanine), 649 (tyrosine, guanine (ring breathing)), 657 (guanine (COO deformation)), 728-735 (adenine, glycosidic ring mode), 796 (tyrosine (C-N stretching)), 957 (C-N stretching (amide lipopolysaccharides)), 1096 (PO2 (nucleic acid)), 1113 (phenylalanine), 1249 (CH2 of amide III, N-H bending and C-O stretching (amide III)), 1273 (CH2, N-H, C-N, amide III), 1331 (C-N stretching mode of adenine), 1373 (in nucleic acids (ring breathing modes of the DNA/RNA bases)) and 1454 cm-1 (CH2 deformation of saturated lipids), indicating the degradation of bacteria and replication of bacteriophages. Multivariate data analysis was performed by employing principal component analysis (PCA) and partial least squares-discriminant analysis (PLS-DA) to study the biochemical differences in the S. aureus bacteria infected by the bacteriophage. The SERS spectral data sets were successfully differentiated by PLS-DA with 94.47% sensitivity, 98.61% specificity, 94.44% precision, 98.88% accuracy and 81.06% area under the curve (AUC), which shows that at 50 min interval S. aureus bacteria is degraded by the replicating bacteriophages.

Surface-enhanced Raman spectroscopy for comparison of biochemical profile of bacteriophage sensitive and resistant methicillin-resistant Staphylococcus aureus (MRSA) strains.

Methicillin-resistant Staphylococcus aureus (MRSA) is gram positive bacteria and leading cause of a wide variety of diseases. It is a common cause of hospitalized and community-acquired infections. Development of increasing antibiotic-resistance by methicillin-resistant S. aureus (MRSA) strains demand to develop alternate novel therapies. Bacteriophages are now widely used as antibacterial therapies against antibiotic-resistant gram-positive pathogens. So, there is an urgent need to find fast detection techniques to point out phage susceptible and resistant strains of methicillin-resistant S. aureus (MRSA) bacteria. Samples of two separate strains of bacteria, S. aureus, in form of pellets and supernatant, were used for this purpose. Strain-I was resistant to phage, while the other (strain-II) was sensitive. Surface Enhanced Raman Spectroscopy (SERS) has detected significant biochemical changes in these bacterial strains of pellets and supernatants in the form of SERS spectral features. The protein portion of these two types of strains of methicillin-resistant S. aureus (MRSA) in their relevant pellets and supernatants is major distinguishing biomolecule as shown by their representative SERS spectral features. In addition, multivariate data analysis techniques such as principal component analysis (PCA) and a partial least squares-discriminant analysis (PLS-DA) were found to be helpful in identifying and characterizing various strains of S. aureus which are sensitive and resistant to bacteriophage with 100% specificity, 100% accuracy, and 99.8% sensitivity in case of SERS spectral data sets of bacterial cell pellets. Moreover, in case of supernatant samples, the results of PLS-DA model including 95.5% specificity, 96% sensitivity, and 96.5% accuracy are obtained.

Surface-Enhanced Raman Scattering (SERS) in Combination with PCA and PLS-DA for the Evaluation of Antibacterial Activity of 1-Isopentyl-3-pentyl-1H-imidazole-3-ium Bromide against Bacillus subtilis.

In the current study, surface-enhanced Raman scattering (SERS) was performed to evaluate the antibacterial activity of lab-synthesized drug (1-isopentyl-3-pentyl-1H-imidazole-3-ium bromide salt) and commercial drug tinidazole againstBacillus subtilis. The changes in SERS spectral features were studied for unexposed bacillus and exposed one with various dosages of drug synthesized in the lab (1-isopentyl-3-pentyl-1H-imidazole-3-ium bromide salt), and SERS bands were assigned associated with the drug-induced biochemical alterations in bacteria. Multivariate data analysis tools including principal component analysis (PCA) and partial least-squares discriminant analysis (PLS-DA) have been utilized to analyze the antibacterial activity of the imidazole derivative (lab drug). PCA was employed in differentiating all the SERS spectral data sets associated with the various doses of the lab-synthesized drug. There is clear discrimination among the spectral data sets of a bacterial strain treated with different concentrations of the drug, which are analyzed by PLS-DA with 86% area under the curve in receiver operating curve (ROC), 99% sensitivity, 100% accuracy, and 98% specificity. Various dominant spectral features are observed with a gradual increase in the different concentrations of the applied drug including 715, 850, 1002, 1132, 1237, 1396, 1416, and 1453 cm-1, which indicate the possible biochemical changes caused in bacteria during the antibacterial activity of the lab-synthesized drug. Overall, the findings show that imidazole and imidazolium compounds generated from tinidazole with various alkyl lengths in the amide substitution can be effective antibacterial agents with low cytotoxicity in humans, and these results indicate the efficiency of SERS in pharmaceuticals and biomedical applications.

Rapid Identification and Quantification of Adulteration in Methyl Eugenol using Raman Spectroscopy Coupled with Multivariate Data Analysis.

Identification of adulterants in commercial samples of methyl eugenol is necessary because it is a botanical insecticide, a tephritid male attractant lure that is used to attract and kill invasive pests such as oriental fruit flies and melon flies on crops. In this study, Raman spectroscopy was used to qualitatively and quantitatively assess commercial methyl eugenol along with adulterants. For this purpose, commercial methyl eugenol was adulterated with different concentrations of xylene. The Raman spectral features of methyl eugenol and xylene in liquid formulations were examined, and Raman peaks were identified as associated with the methyl eugenol and adulterant. Principal component analysis (PCA) and partial least-squares regression analysis (PLSR) have been used to qualitatively and quantitatively analyze the Raman spectral features. PCA was applied to differentiate Raman spectral data for various concentrations of methyl eugenol and xylene. Additionally, PLSR has been used to develop a predictive model to observe a quantitative relationship between various concentrations of adulterated methyl eugenol and their Raman spectral data sets. The root-mean-square errors of calibration and prediction were calculated using this model, and the results were found to be 1.90 and 3.86, respectively. The goodness of fit of the PLSR model is found to be 0.99. The proposed approach showed excellent potential for the rapid, quantitative detection of adulterants in methyl eugenol, and it may be applied to the analysis of a range of pesticide products.

Uric acid quantification via colorimetric detection utilizing silver oxide-modified activated carbon nanoparticles functionalized with ionic liquid.

Uric acid (UA) is a significant indicator of human health because it is linked to several diseases, including renal failure, kidney stones, arthritis, and gout. Uric acid buildup in the joints is the source of chronic and painful diseases. When UA is present in large quantities, it causes tissue injury in the joints that are afflicted. In this research, silver oxide-doped activated carbon nanoparticles were synthesized and then functionalized with an ionic liquid. The synthesized nanomaterial assembly was employed as a colorimetric sensing platform for uric acid. Activated carbon offers a large internal surface area that acts as a good carrier for catalytic reactions. A salt-melting approach was used to synthesize the silver oxide-doped activated carbon nanocomposite. The synthesis was confirmed through various techniques, such as UV-vis spectrophotometer, FTIR, XRD, SEM, and EDX. The colorimetric change from blue-green to colorless was observed with the naked eye and confirmed by UV-vis spectroscopy. To obtain the best colorimetric change, several parameters, such as pH, capped NP loading, TMB concentration, hydrogen peroxide concentration, and time, were optimized. The optimized experimental conditions for the proposed sensor were pH 4 with 35 µL of NPs, a 40 mM TMB concentration, and a 4 minutes incubation time. The sensor linear range is 0.001-0.36 µM, with an R2 value of 0.999. The suggested sensor limits of detection and quantification are 0.207 and 0.69 nM, respectively. Potential interferers, such as ethanol, methanol, urea, Ca2+, K+, and dopamine, did not affect the detection of uric acid.

Surface-enhanced Raman spectroscopy for studying the interaction of organometallic compound bis(1,3-dihexylimidazole-2-yl) silver(i) hexafluorophosphate (v) with the biofilm of Escherichia coli.

Escherichia coli biofilms are a major cause of gastrointestinal tract diseases, such as esophageal, stomach and intestinal diseases. Nowadays, these are the most commonly occurring diseases caused by consuming contaminated food. In this study, we evaluated the efficacy of probiotics in controlling multidrug-resistant E. coli and reducing its ability to form biofilms. Our results substantiate the effective use of probiotics as antimicrobial alternatives and to eradicate biofilms formed by multidrug-resistant E. coli. In this research, surface enhanced Raman spectroscopy (SERS) was utilized to identify and evaluate Escherichia coli biofilms and their response to the varying concentrations of the organometallic compound bis(1,3-dihexylimidazole-2-yl) silver(i) hexafluorophosphate (v). Given the escalating challenge of antibiotic resistance in bacteria that form biofilms, understanding the impact of potential antibiotic agents is crucial for the healthcare sector. The combination of SERS with principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) enabled the detection and characterization of the biofilm, providing insights into the biochemical changes induced by the antibiotic candidate. The identified SERS spectral features served as indicators for elucidating the mode of action of the potential drug on the biofilm. Through PCA and PLS-DA, metabolic variations allowing the differentiation and classification of unexposed biofilms and biofilms exposed to different concentrations of the synthesized antibiotic were successfully identified, with 95% specificity, 96% sensitivity, and a 0.75 area under the curve (AUC). This research underscores the efficiency of surface enhanced Raman spectroscopy in differentiating the impact of potential antibiotic agents on E. coli biofilms.

Effect of deficit irrigation combined with Bacillus simplex on water use efficiency and growth parameters of maize during vegetative stage.

The production of crops depending on many factors including water, nutrient, soil types, climate and crops types, water stress and drought is in one of the important factors affecting crop productivity. The experiment was conducted in pots to evaluate the effect of biofertilizers (Bacillus simplex) with deficit irrigations on the early development and growth of maize crop under greenhouse condition. Pre sowing seed was inoculated with strain of bacteria (B+/B-) and different irrigation levels (no stress: 100% (I1) and deficit irrigation: 75 (I2), 50 (I3), 25 (I4) % of required water amount to reach pot capacity) was performed. Data was collected on different morphological characteristics and root characteristic of maize crop. Highest plant height (125 cm), stem diameter (18.02 mm), leaf area (350 cm- 2), plant weight (180.42 g in fresh, 73.58 g in dry), root length (92.83 cm) root ((91.70 g in fresh, (28.66 g in dry) weight were recorded in pots applied with 100% irrigation followed by 75%. Bacillus treated plants showed significant increase in leaf area (214.20 cm- 2), plant fresh weight (91.65 g) and dry weight (42.05 g), root length (79.20 cm), root fresh (53.52 g) and dry weight (16.70 g) compared with control (without bacteria). Likewise highest relative water content of leaf was observed with I3 followed by I2 and I1 respectively. Highest water use efficiency was recorded as 0.67 g pot- 1 mm- 1 in I1 with B + treatment. Likewise, Bacillus inoculated pots resulted in increased water use efficiency (0.44 g pot- 1 mm- 1) compared with no application (0.36 g pot- 1 mm- 1). It can be endorsed from the outcome that Bacillus inoculation increased plant biomass, root biomass of maize and water use efficiency during early growth stage of maize despite of water stress and can be used under limited water condition for crop combating during moderate to lower stress conditions.

Surface-enhanced Raman spectroscopy of the filtrate portions of the blood serum samples of breast cancer patients obtained by using 30 kDa filtration device.

Raman spectroscopy is reliable tool for analyzing and exploring early disease diagnosis related to body fluids, such as blood serum, which contain low molecular weight fraction (LMWF) and high molecular weight fraction (HMWF) proteins. The disease biomarkers consist of LMWF which are dominated by HMWF hence their analysis is difficult. In this study, in order to overcome this issue, centrifugal filter devices of 30 kDa were used to obtain filtrate and residue portions obtained from whole blood serum samples of control and breast cancer diagnosed patients. The filtrate portions obtained in this way are expected to contain the marker proteins of breast cancer of the size below this filter size. These may include prolactin, Microphage migration inhabitation factor (MIF), γ-Synuclein, BCSG1, Leptin, MUC1, RS/DJ-1 present in the centrifuged blood serum (filtrate portions) which are then analyzed by the SERS technique to recognize the SERS spectral characteristics associated with the progression of breast cancer in the samples of different stages as compared to the healthy ones. The key intention of this study is to achieve early-stage breast cancer diagnosis through the utilization of Surface Enhanced Raman Spectroscopy (SERS) after the centrifugation of healthy and breast cancer serum samples with Amicon ultra-filter devices of 30 kDa. The silver nanoparticles with high plasmon resonance are used as a substrate for SERS analysis. Principal Component Analysis (PCA) and Partial Least Discriminant Analysis (PLS-DA) models are utilized as spectral classification tools to assess and predict rapid, reliable, and non-destructive SERS-based analysis. Notably, they were particularly effective in distinguishing between different SERS spectral groups of the cancerous and non-cancerous samples. By comparing all these spectral data sets to each other PLSDA shows the 79 % accuracy, 76 % specificity, and 81 % sensitivity in samples with AUC value of AUC = 0.774 SERS has proven to be a valuable technique for the rapid identification of the SERS spectral features of blood serum and its filtrate fractions from both healthy individuals and those with breast cancer, aiding in disease diagnosis.

In-silico evaluation of natural alkaloids against the main protease and spike glycoprotein as potential therapeutic agents for SARS-CoV-2.

Severe Acute Respiratory Syndrome Corona Virus (SARS-CoV-2) is the causative agent of COVID-19 pandemic, which has resulted in global fatalities since late December 2019. Alkaloids play a significant role in drug design for various antiviral diseases, which makes them viable candidates for treating COVID-19. To identify potential antiviral agents, 102 known alkaloids were subjected to docking studies against the two key targets of SARS-CoV-2, namely the spike glycoprotein and main protease. The spike glycoprotein is vital for mediating viral entry into host cells, and main protease plays a crucial role in viral replication; therefore, they serve as compelling targets for therapeutic intervention in combating the disease. From the selection of alkaloids, the top 6 dual inhibitory compounds, namely liensinine, neferine, isoliensinine, fangchinoline, emetine, and acrimarine F, emerged as lead compounds with favorable docked scores. Interestingly, most of them shared the bisbenzylisoquinoline alkaloid framework and belong to Nelumbo nucifera, commonly known as the lotus plant. Docking analysis was conducted by considering the key active site residues of the selected proteins. The stability of the top three ligands with the receptor proteins was further validated through dynamic simulation analysis. The leads underwent ADMET profiling, bioactivity score analysis, and evaluation of drug-likeness and physicochemical properties. Neferine demonstrated a particularly strong affinity for binding, with a docking score of -7.5025 kcal/mol for main protease and -10.0245 kcal/mol for spike glycoprotein, and therefore a strong interaction with both target proteins. Of the lead alkaloids, emetine and fangchinoline demonstrated the lowest toxicity and high LD50 values. These top alkaloids, may support the body's defense and reduce the symptoms by their numerous biological potentials, even though some properties naturally point to their direct antiviral nature. These findings demonstrate the promising anti-COVID-19 properties of the six selected alkaloids, making them potential candidates for drug design. This study will be beneficial in effective drug discovery and design against COVID-19 with negligible side effects.

Quantitative analysis of cephalexin in solid dosage form by Raman spectroscopy and chemometric tools.

OBJECTIVE: To use Raman Spectroscopy for qualitative and quantitative evaluation of pharmaceutical formulations of active pharmaceutical ingredient (API) of Cephalexin. SIGNIFICANCE: Raman Spectroscopy is a noninvasive, nondestructive, reliable and rapid detection technique used for various pharmaceutical drugs quantification. The present study explores the potential of Raman Spectroscopy for quantitative analysis of pharmaceutical drugs. METHOD: For qualitative and quantitative analysis of Cephalexin API, various standard samples containing less and more concentration of API than commercial tablet was prepared. To study spectral differences, the mean plot of all the samples was prepared. For qualitative analysis, Principal Component Analysis (PCA) and for quantitative analysis Partial Least Square Regression analysis (PLSR) was used. Both of these are Multivariate data analysis techniques and give reliable results as published in previous literature. RESULTS: PCA model distinguished all the Raman Spectral data related to the various Cephalexin solid dosage formulations whereas the PLSR model was used to calculate the concentration of different unknown formulations. For the PLSR model, RMSEC and RMSEP were determined to be 3.3953 and 3.8972, respectively. The prediction efficiency of this built PLSR model was found to be very good with a goodness of the model value (R2) of 0.98. The PLSR model also predicted the concentrations of Cephalexin formulations in the blind or unknown sample. CONCLUSION: These findings demonstrate that the Raman spectroscopy coupled to PLSR analysis could be regarded as a fast and effectively reliable tool for quantitative analysis of pharmaceutical drugs.

Recent developments in lignin-based fluorescent materials.

Biomass-based fluorescent materials are an alternative to plastic-based materials for their multifunctional applications. Lignin, an inexpensive and easily available raw material, demonstrates outstanding environment-responsive properties such as pH, metal ions, dyes sensing, bioimaging and so on. To date, only a little work has been reported on the synthesis of lignin-based fluorescent materials. In this review report, synthetic approaches and light-responsive applications of lignin-based fluorescent carbon dots and other materials are summarized. The results reveal that lignin-based fluorescent carbon dots are prepared by hydrothermal method, exhibit small size <10 nm, reveal significant quantum yield, biocompatibility, non-toxicity, photostability and display substantial tunable emission and can be efficiently employed for sensing, bioimaging and energy storage applications. Finally, the forthcoming challenges, investigations, and options open for the chemical and/or physical modification of lignin into fluorescent materials for future applications are well-addressed. To our knowledge, this is the first comprehensive review report on lignin-based fluorescent materials and their light-responsive applications. In addition, this review will attract remarkable consideration and thrust for the researchers and biochemical technologists working with the preparation of lignin-based fluorescent materials for broad applications.

Characterization of three different benzimidazolium ligands and their organo-selenium complexes by using density functional theory and Raman spectroscopy.

In the present study, Raman spectroscopy (RS) along with density functional theory (DFT) calculations have been performed for the successful characterization and confirmation of the formation of three different selenium-based N-heterocyclic carbene (NHC) complexes from their respective salts. For this purpose, mean RS features and DFT calculations of different ligands and their respective selenium NHC complexes are compared. The identified characteristic RS and DFT features, of each of these ligands and their selenium complexes, show that the polarizability of benzimidazolium rings increases after complex formation with selenium. This has been shown by the enhanced intensity of the associated Raman peaks, therefore, confirming the formation of newly formed bonds. The complex formation is also confirmed by the identification of several new peaks in the spectra of complexes and these Raman bands were absent in the spectra of the ligands. Moreover, Raman spectral data sets are analyzed using a multivariate data analysis technique of Principal Component Analysis (PCA) to observe the efficiency of the RS analysis. The results presented in this study have proved the RS technique, along with DFT, an undoubtedly fast approach for the confirmation of synthesis of selenium based NHC-complexes.

Raman Spectroscopy for the Quantitative Analysis of Solid Dosage Forms of the Active Pharmaceutical Ingredient of Febuxostat.

Raman spectroscopy has been used to characterize and quantify the solid dosage forms of the commercially available drug febuxostat. For this purpose, different formulations consisting of the febuxostat (API) and excipients with different concentrations of the API are prepared and analyzed by Raman spectroscopy to identify different spectral features related to the febuxostat API and excipients. Multivariate data analysis tools such as principal component analysis (PCA) and partial least-squares regression (PLSR) analysis are used for qualitative and quantitative analyses. PCA has been found to be useful for the qualitative monitoring of various solid dosage forms. PLSR analysis has led to the successful prediction of API concentration in the unknown samples with a sensitivity and a selectivity of 98 and 99%, respectively. Moreover, the root-mean-square error (RMSE) of calibration and validation of the PLSR model has been found to be 2.9033 and 1.35, respectively. Notably, it is found to be very helpful for the comparison between the self-made formulations of febuxostat and commercially available febuxostat tablets (40 and 80 mg) of two different brands (Gouric and Zurig). These results showed that Raman spectroscopy can be a useful and reliable technique for identifying and quantifying the active pharmaceutical ingredient (API) in commercially available solid dosage forms.

Synthesis, Characterization, and Evaluation of Antifungal Activity of 1-Butyl-3-hexyl-1H-imidazol-2(3H)-selenone by Surface-Enhanced Raman Spectroscopy.

In the present research work, a selenium N-heterocyclic carbene (Se-NHC) complex/adduct was synthesized and characterized by using different analytical methods including FT-IR, 1HNMR, and 13CNMR. The antifungal activity of the Se-NHC complex against Aspergillus flavus (A. flavus) fungus was investigated with disc diffusion assay. Moreover, the biochemical changes occurring in this fungus due to exposure of different concentrations of the in-house synthesized compound are characterized by surface-enhanced Raman spectroscopy (SERS) and are illustrated in the form of SERS spectral peaks. SERS analysis yields valuable information about the probable mechanisms responsible for the antifungal effects of the Se-NHC complex. As demonstrated by the SERS spectra, this Se-NHC complex caused denaturation and conformational changes in the proteins as well as decomposition of the fungal cell membrane. The SERS spectra were analyzed using two chemometric tools such as principal component analysis (PCA) and partial least-squares discriminant analysis (PLS-DA). The fungal samples' SERS spectra were differentiated using PCA, while various groups of spectra were discriminated with ultrahigh sensitivity (98%), high specificity (99.7%), accuracy (100%), and area under the receiver operating characteristic curve (87%) using PLS-DA.

Qualitative and Quantitative Analysis of Azithromycin as Solid Dosage by Raman Spectroscopy.

Active pharmaceutical ingredients (APIs) and excipients are main drug constituents that ought to be identified qualitatively and quantitatively. Raman spectroscopy is aimed to be an efficient technique for pharmaceutical analysis in solid dosage forms. This technique can successfully be used in terms of qualitative and quantitative analysis of pharmaceutical drugs, their APIs, and excipients. In the proposed research, Raman spectroscopy has been employed to quantify Azithromycin based on its distinctive Raman spectral features by using commercially prepared formulations with altered API concentrations and excipients as well. Along with Raman spectroscopy, principal component analysis and partial least squares regression (PLSR), two multivariate data analysis techniques have been used for the identification and quantification of the API. For PLSR, goodness of fit of the model (R2) was found to be 0.99, whereas root mean square error of calibration was 0.46 and root mean square error of prediction was 2.42, which represent the performance of the model. This study highlights the efficiency of Raman spectroscopy in the field of pharmaceutics by preparing pharmaceutical formulations of any drug to quantify their API and excipients to compensate for the commercially prepared concentrations.

Assessing Adherence to Royal College of Surgeons Guidelines: A Closed-Loop Audit of Operation Notes in a Tertiary Healthcare Unit.

Introduction Accurate, comprehensive, and legible operation notes are essential for maintaining patient records, supporting healthcare professionals, and facilitating research. The study focused on adherence to Royal College of Surgeons (RCS) guidelines established in 2008. Despite the guidelines, poor documentation practices have been reported globally. This audit seeks to address this issue and enhance documentation quality. Methodology The audit evaluated 19 parameters as defined in the 2014 RCS operative note guidelines. Data collection occurred during the initial cycle, spanning from March to April 2023, encompassing all surgical procedures at Hayatabad Medical Complex (HMC). Subsequently, a re-audit took place in July 2023 to gauge enhancements following a survey and educational intervention that took place in June 2023. The process included the formation of an audit team, securing ethical approval, and implementing a comprehensive methodology for data collection and analysis. The study spanned two data collection cycles to comprehensively assess improvements. Results Comparing initial and re-audit cycles (n = 390 and n = 108, respectively), improvements were observed in several documentation aspects. Parameters such as surgery date, elective/emergency classification, and names of key personnel showed significant enhancement. Notable improvements were also seen in the recording of operative details, complications, extra procedures, and post-operative care instructions. In our department, an educational survey was conducted to gain insights into compliance rates. This survey underscored the significance of adhering to RCS guidelines, identified the factors influencing adherence, and proposed strategies for improvement. Conclusion The audit affirmed the significance of adhering to RCS guidelines for operation note documentation. The study demonstrated improvements in documentation practices, emphasising the importance of accurate records for patient care, research, and ethical standards. The findings validate RCS guidelines as a tool for the identification of defects in documentation and thus as a guide that highlights where improvements are necessary. Addressing challenges identified in this audit can drive the department towards becoming a model for RCS guideline adherence and showcasing high-quality surgical documentation and patient-centred care.