The wingspan suspension approach: A modified semilunar technique for multiple areas of recession.

BACKGROUND: Gingival recession can be considered an undesirable condition that results in the exposure of the root surface. There are many techniques that can be employed to address gingival recession; however, they frequently involve a second surgical site. Other approaches have been introduced in the past to address this concern, and this case study discusses the use of a modified technique to achieve root coverage. METHODS: A patient presented to the periodontics clinic with concerns regarding gingival recession. A modification to the semilunar technique was employed to address the recession, whereas double sling sutures were utilized to maintain the coronal repositioning of the flap. RESULTS: Maxillary central incisors initially presented with 2-3 mm of facial recession and root coverage was achieved by use of a modified surgical semilunar approach. No rebound noted over a 6-month period, newly established gingival margin deemed clinically stable. CONCLUSIONS: This case study provides an alternative to addressing gingival recession in the maxillary anterior region, when <3 mm of recession is noted. Avoidance of a second surgical procedure and/or donor site is of particular benefit, as well as maintenance of the blood supply. KEY POINTS: Why is this case new information? There is insufficient evidence on the use of a modified wingspan incision design Phenotype modification with elimination of a second surgical site is most ideal for the patient. What are the keys to successful management of this case? Comprehensive diagnosis and proper case selection Meticulous flap management and adequate release to allow for repositioning without tension Appropriate use ofsuture and suturing technique. What are the primary limitations to success in this case? Thin periodontal phenotype Poor oral hygiene and plaque accumulation postoperatively Loss to follow-up.

Optimizing esthetic zone periodontal regeneration in a 1-2-wall infrabony defect using recombinant human platelet-derived growth factor BB and ß-tricalcium phosphate: A case report.

OBJECTIVE: Periodontitis is an inflammatory condition induced by subgingival bacterial dysbiosis, resulting in inflammatory-mediated destruction of tooth-supporting structures, potentially leading to the formation of infrabony defects. This case report describes the treatment of a patient who presented with a combination 1-2-wall defect on tooth 21. To maintain the residual periodontal attachment and minimize esthetic consequences, a regenerative approach was performed using recombinant human platelet-derived growth factor-BB (rh-PDGF-BB) and ß-tricalcium phosphate (ß-TCP). MATERIALS AND METHODS: At the time of postscaling/root planing reevaluation, a 34-year-old Asian male initially diagnosed with molar/incisor pattern stage III grade C periodontitis exhibited a 6-mm residual probing depth on the mesiopalatal aspect of tooth 21. Periodontal regenerative surgery was performed using rh-PDGF-BB with ß-TCP, without the use of a membrane. RESULTS: At the 1-year follow-up, a significant reduction in probing depth and radiographic evidence of bone fill were observed. Additionally, re-entry surgery for implant placement at site tooth 23 confirmed bone fill in the defect on tooth 21. CONCLUSION: These results demonstrate the efficacy of rh-PDGF-BB with ß-TCP in enhancing periodontal regeneration and support its use as a treatment option when treating poorly contained infrabony defects in the esthetic zone.

Immediate single-tooth replacement with acellular dermal matrix allogeneic bone and ossifying collagen scaffold: A case series.

The pursuit of predictable implant success in the aesthetic zone continues as technology develops. Creating stable marginal bone and an optimal peri-implant mucosal environment is the foundation for a long-term healthy and aesthetic implant treatment outcome. Tissue stability is dependent on multiple factors, including the regenerative materials used to create the peri-implant supporting tissues and maintain the tissue volume. The present study aims to describe a technique that combines a flapless approach to extract hopeless teeth in the aesthetic zone and implant insertion using an acellular dermal matrix placed to contain the coronal aspect of an innovative ossifying collagen scaffold designed to promote neoformation of vital native bone. This technique combines a minimally invasive approach with the application of a novel biomaterial that offers stable augmentation of the gingival thickness as well as bone fill in the facial gap, the space between the implant and the buccal plate, to ensure predictable aesthetic results. A collection of cases are presented to demonstrate the surgical technique and the situation over a follow-up period of 22 months. Pre- and post-treatment CBCT imaging were utilised to quantify the stability or changes noted in the alveolar bone, and pre-and post-treatment intraoral scanning were used for the same purpose in the peri-implant phenotype. This case series presents stable and aesthetic clinical outcomes evaluated through digital assessment.

Three-dimensional printing of the human lung pleural cavity model for PDT malignant mesothelioma.

OBJECTIVE: The primary aim was to investigate emerging 3D printing and optical acquisition technologies to refine and enhance photodynamic therapy (PDT) dosimetry in the management of malignant pleural mesothelioma (MPM). MATERIALS AND METHODS: A rigorous digital reconstruction of the pleural lung cavity was conducted utilizing 3D printing and optical scanning methodologies. These reconstructions were systematically assessed against CT-derived data to ascertain their accuracy in representing critical anatomic features and post-resection topographical variations. RESULTS: The resulting reconstructions excelled in their anatomical precision, proving instrumental translation for precise dosimetry calculations for PDT. Validation against CT data confirmed the utility of these models not only for enhancing therapeutic planning but also as critical tools for educational and calibration purposes. CONCLUSION: The research outlined a successful protocol for the precise calculation of light distribution within the complex environment of the pleural cavity, marking a substantive advance in the application of PDT for MPM. This work holds significant promise for individualizing patient care, minimizing collateral radiation exposure, and improving the overall efficiency of MPM treatments.

A novel investigational preclinical model to assess fluence rate for dental oral craniofacial tissues.

OBJECTIVE: Photodynamic Therapy (PDT) and Photobiomodulation (PBM) are recognized for their potential in treating head and neck conditions. The heterogeneity of human tissue optical properties presents a challenge for effective dosimetry. The porcine mandible cadaver serves as an excellent model and has several similarities to human tissues of the dental oral craniofacial complex. This study aims to validate a novel modeling system that will help refine PDT and PBM dosimetry for the head and neck region. METHODS AND MATERIALS: Light transmission was analyzed through several tissue combinations at distances of 2 mm to 10 mm. Maximum light fluence rates (mW/cm2) were compared across tissue types to reveal the effects of tissue heterogeneity. RESULTS: The study revealed that light fluence is affected by tissue composition, with dentin/enamel showing reduced transmission and soft tissue regions exhibiting elevated values. The porcine model has proven to be efficient in mimicking human tissue responses to light, enabling the potential to optimize future protocols. CONCLUSION: The porcine mandible cadaver is a novel model to understand the complex interactions between light and tissue. This study provides a foundation for future investigations into dosimetry optimization for PDT and PBM.

Maintaining tooth-implant distance following root amputation of a compromised adjacent tooth: A clinical case report.

BACKGROUND: Edentulous sites with limited horizontal tooth-implant distance pose a challenge to clinicians. This case report describes root amputation of an adjacent compromised molar to maintain an optimal tooth-implant distance METHODS AND RESULTS: A 41-year-old female was referred for extraction and implant placement to replace her left, maxillary second premolar (#13), which had been diagnosed with a vertical root fracture. Extraction and ridge preservation of #13 was completed without complication. The 4-month postsurgical clinical examination revealed a narrow mesial-distal distance (5.69 mm) of the edentulous space (#13), which was influenced by the degree of divergence of the mesial buccal root of tooth #14. Cone-beam computed tomography (CBCT) analysis verified a periapical lesion on the mesial-buccal root of tooth #14. The amputation of the endodontically compromised mesial-buccal root of #14 was treatment planned to provide space and facilitate placement of a standard diameter implant without compromising the implant or adjacent teeth. Crestal bone levels were verified and maintained at the 1 year postoperative follow-up. CONCLUSION: The findings of the case report demonstrate how root amputation of a compromised molar is an alternative solution for managing spatial limitations in contemporary implant dentistry. More studies are required to assess the reliability and long-term success of this approach. KEY POINTS: Why is this case new information? There is insufficient evidence on the long-term efficacy of narrow-diameter implants. Clinical treatment guidelines are not sufficiently available. This paper presents an alternative approach to managing a specific scenario where mesial-distance distance is limited using root amputation of an adjacent compromised tooth. What are the keys to successful management of this case? Comprehensive diagnosis and stringent case selection Multidisciplinary treatment planning Evidence-based decision making What are the primary limitations to success in this case? Very specific clinical application; adjacent compromised tooth Long-term follow up is required.

Osseodensification versus lateral window technique for sinus floor elevation with simultaneous implant placement: A randomized clinical trial on patient-reported outcome measures.

OBJECTIVES: To compare patient-reported outcome measures and additional surgical outcomes after sinus floor elevation (SFE) with osseodensification (OD) versus lateral window (LW), both with simultaneous implant placement. MATERIALS AND METHODS: Twenty participants requiring single-implant rehabilitation with residual bone height (RBH) ≤4 mm were enrolled. Pain experience, quality of life (QoL) via the Oral Health Impact Profile-14 (OHIP-14), analgesics intake, and other symptoms were self-reported for a week on a daily basis. Surgery duration, complications, and implant stability quotient at baseline (ISQ T0 ) and after 6 months (ISQ T6 ) were registered. Participants were followed up for 1 year. RESULTS: From Day 0 (day of surgery) to Day 3, pain experience was significantly lower (p < 0.05) in the OD group. OHIP-14 score was significantly lower (p < 0.05) in the OD group on all postoperative days, except on Day 5. Average analgesics intake was significantly lower (p < 0.001) in the OD group. Surgery mean duration was significantly higher (p < 0.001) in LW compared to OD (71.1 ± 10.4 vs. 32.9 ± 5.3 min). After osseointegration period, all implants were successfully restored with screw-retained crowns. CONCLUSIONS: Within the limitations of this study, it can be concluded that OD and LW techniques were similarly effective in SFE with simultaneous implant placement when RBH ≤ 4 mm. However, OD significantly outperformed LW in pain experience, impact on self-perceived QoL, surgery duration, postoperative edema, and analgesics intake.

Facially Driven Digital Workflow for Maxillary and Mandibular Milled Implant- Retained Overdentures Using Two Different Unsplinted Attachment Systems: Case Report.

Unsplinted attachment systems for implant overdentures offer various benefits for edentulous patients, including cost-effectiveness, enhanced cleansability, and less need for manual dexterity. This article describes a facially driven digital workflow for fabricating a maxillary implant overdenture retained by conometric-style attachments (Atlantis® Conus) with a palateless design opposing an implant overdenture retained by standard attachments (LOCATOR®). This procedure provides a predictable and accurate technique to digitally scan the master casts with wax rims for articulation and to guide the digital teeth design set-up for a predictable esthetic outcome. The removable prosthesis workflow involves virtual teeth set-up, a 3D-printed trial denture, a milled definitive prosthesis, and intraoral pick-up for both unsplinted attachment systems. The clinical and laboratory steps are described.

Clinical Comparison of Vascular Bleeding Time Creep Between Osseodensification and Conventional Drilling of Implant Osteotomy Sites.

This study compared the onset of vascular bleeding between osseodensification and conventional drilling of implant osteotomy sites. Patients with type III trabecular bone requiring a single missing tooth replacement were included and allocated to either Group A (test) or Group B (control). In Group A, the osseodensification group (OD), an implant osteotomy was carried out using Densah Burs (Versah) in the counterclockwise direction; in Group B, the standard drilling group (SD), Densah Burs were run in the clockwise direction. An endoscope was introduced into the osteotomy to visualize and measure the time taken for initiation of bleeding (BI) and for blood to fill the osteotomy site (BF). A total of 40 osteotomy sites (23 in the maxilla and 17 in the mandible) were included in this cross-sectional study. The mean age of study participants was 50.1 ± 8.28 years. The mean BI time for Groups A and B was 18.54 ± 2.48 seconds and 16.89 ± 1.92 seconds, respectively (P = .02); the mean BF time for Groups A and B was 41.92 ± 3.19 seconds and 37.95 ± 2.73 seconds, respectively (P < .001). Osseodensification does not seem to negatively affect or induce loss of bone vascularity. Clinicians should note that osseodensified sites might take slightly longer to fill with blood following an osteotomy.

Living cellular constructs for keratinized tissue augmentation: A 13-year follow-up from a split-mouth randomized, controlled, clinical trial.

BACKGROUND: A 13-year follow-up was conducted of a short-term investigation of the use of living cellular construct (LCC) versus free gingival graft (FGG) for keratinized tissue width (KTW) augmentation in natural dentition, to evaluate the long-term outcomes and assess the changes occurring since the end of the original 6-month study. METHODS: Twenty-four subjects out of the original 29 enrolled participants were available at the 13-year follow-up. The primary endpoint was the number of sites demonstrating stable clinical outcomes from 6 months to 13 years (defined as KTW gain, stability, or ≤0.5 mm of KTW loss, together with reduction, stability, or increase of probing depth, and recession depth [REC] ≤0.5 mm). Secondary outcomes included the assessment of KTW, attached gingiva width (AGW), REC, clinical attachment level, esthetics, and patient-reported outcomes at the 13-year visit, assessing the changes from baseline to 6 months. RESULTS: Nine sites per group (42.9%) were found to have maintained stable (≤0.5 mm or improved) clinical outcomes from 6 months to 13 years. No significant differences were observed for the clinical parameters between LCC and FGG from 6 months to 13 years. However, the longitudinal mixed model analysis showed that FGG delivered significantly better clinical outcomes over 13 years (p < 0.01). LCC-treated sites exhibited superior esthetic outcomes compared to FGG-treated sites at 6 months and 13 years (p < 0.01). Patient-evaluated esthetics were significantly higher for LCC over FGG (p < 0.01). Patient overall treatment preference was also in favor of LCC (p < 0.01). CONCLUSIONS: A similar stability of the treatment outcomes from 6 months to 13 years was found for LCC- and FGG-treated sites, with both approaches shown to be effective in augmenting KTW and AGW. However, superior clinical outcomes were found for FGG over 13 years, while LCC was associated with better esthetics and patient-reported outcomes than FGG.

The Influence of Implant Design Features on the Bone Healing Pathway: An Experimental Study in Sheep.

This study evaluated how implant design features influence osseointegration. Two implant macrogeometries and surface treatments were evaluated: (1) progressive buttress threads with an SLActive surface (SLActive/BL), and (2) inner and outer trapezoidal threads with a nanohydroxyapatite coating over a dual acid-etched surface (Nano/U). Implants were placed in the right ilium of 12 sheep, and histologic and -metric analyses were conducted after 12 weeks. Percentages of bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) within the threads were quantified. Histologically, the SLActive/BL group showed greater and more intimate BIC than the Nano/U group. In contrast, Nano/U group depicted woven bone formation within the healing chambers, between the osteotomy wall and implant threads, and bone remodeling was evident at the outer thread tip. Significantly higher BAFO was seen in the Nano/U group than the SLActive/BL group at 12 weeks (P < .042). Different implant design features influenced the osseointegration pathway, supporting further investigations to describe the differences and clinical performance.

Rationale for Implant Site Preservation With Absorbable Bone Scaffolds

Minimizing alveolar ridge atrophy after tooth removal is crucial for the preservation of the alveolar ridge dimensions for future implant placement and subsequent prosthetic rehabilitation. Methods such as bone grafting have been used extensively but generally focus mainly on maintenance of bone volume and less so on bone quality. To achieve enhanced bone quality, it is important that residual bone graft material particles get replaced by new vital bone. This article describes the rationale for and a technique demonstrating implant site preservation with absorbable bone scaffolding to not only maintain alveolar bone anatomy but also improve bone quality for the long-term stability and success of implant therapy.

Double-up Technique for Correction of Ridge Contour Deficiencies.

Implant site preservation has become standard treatment for the management of extraction sites to avoid or limit alveolar ridge atrophy following tooth extraction. Multiple techniques and materials have been utilized because of their ability to enhance bone healing and bone-forming capacity in extraction sockets and maintain alveolar ridge dimension for optimal implant placement. This article describes a novel method of contour ridge augmentation using a ribose-based cross-linked multilayered dual soft- and hard-tissue absorbable scaffold that also yields exceptional dental implant esthetics.

A Biologic Perspective on the Use of Partial Extraction Therapy in Implant Dentistry.

Many clinical procedures have been developed over the past 20 years that are aimed at minimizing the volumetric loss that occurs when a tooth is removed. One procedure that has been developed and refined in an effort to overcome alternate procedural limitations is partial extraction therapy (PET). Integral to this technique is the purposeful retention and shaping of a portion of the root of the extracted tooth. While it is generally understood that the PET procedure has a positive effect on the retention of hard- and soft-tissue volume with minimal complications, clinicians should have a biologic understanding of why favorable results are able to be achieved with this technique, as the literature is lacking such a biologic discussion.

Lasso Guided Bone Regeneration Technique for the Management of Implant Fenestration Defects.

Implant placement in the anterior maxilla provides many unique challenges to the clinician, including esthetics and potential alveolar bone anatomic variations. The depth of the implant osteotomy is a key consideration to avoid a fenestration defect, which could necessitate subsequent treatment. Treatment options for such defects include bone augmentation with or without implantoplasty. Bone augmentation for the correction of dehiscence or fenestration defects on restored dental implants can be difficult due to the grafted site being close to the margin of the flap, thereby favoring premature bone graft and/or barrier membrane exposure. This article describes the management of an implant fenestration defect using lasso guided bone regeneration, a contemporary technique for bone augmentation and alveolar reconstruction designed to maximize predictability and tissue quality by combining fast-absorbing bone replacement materials with long-lasting barrier membranes and stabilization with internal periosteal sutures.

Osseodensification Effective for Immediate Molar Replacement.

A fairly common treatment modality for anterior and posterior single-rooted teeth, immediate implant placement in molar areas is less prevalent. Technical challenges can arise when creating an implant osteotomy in a fresh extraction socket of a multi-rooted tooth. Also, the proximity to important anatomic structures and the difficulty in achieving adequate implant stability in wide sockets can also be hindrances. The principles of osseodensification may be utilized as part of a novel, predictable technique for immediate molar replacement with an implant. This article discusses the osseodensification technique, including such key factors as site assessment, radiographic evaluation, minimally traumatic tooth removal, implant positioning, and instrumentation.

Enhanced Tissue Quality Result of Evolution of Biomaterials in Implant Dentistry.

Not until the concept of restoratively driven implant dentistry was proposed did surgeons start using surgical guides as a reference for implant dentistry. Because implant placement solely based on bone availability was no longer acceptable, surgeons were now faced with a new challenge: overcoming the lack of alveolar bone volume in the most ideal restorative position where implants should be placed.

Effects of Osseodensification on Immediate Implant Placement: Retrospective Analysis of 211 Implants.

Osseodensification is a new method of bone instrumentation for dental implant placement that preserves bulk bone and increases primary implant stability, and may accelerate the implant rehabilitation treatment period and provide higher success and survival rates than conventional methods. The aim of this retrospective study was to evaluate and discuss results obtained on immediate implant placement with immediate and delayed loading protocols under Osseodensification bone instrumentation. This study included private practice patients that required dental implant rehabilitation, between February 2017 and October 2019. All implants were placed under Osseodensification and had to be in function for at least 12 months to be included on the study. A total of 211 implants were included in the study, with a 98.1% total survival rate (97.9% in the maxilla and 98.5% in the mandible). For immediate implants with immediate load, 99.2% survival rate was achieved, and 100% survival rate for immediate implant placement without immediate load cases. A total of four implants were lost during this period, and all of them were lost within two months after placement. Within the limitations of this study, it can be concluded that Osseodensification bone instrumentation provided similar or better results on survival rates than conventional bone instrumentation.

Soft tissue phenotype modification predicts gingival margin long-term (10-year) stability: Longitudinal analysis of six randomized clinical trials.

AIM: To assess the prognostic value of soft tissue phenotype modification following root coverage procedures for predicting the long-term (10-year) behaviour of the gingival margin. MATERIALS AND METHODS: Participants from six randomized clinical trials on root coverage procedures at the University of Michigan were re-invited for a longitudinal evaluation. Clinical measurements were obtained by two calibrated examiners. A data-driven approach to model selection with Akaike information criterion (AIC) was carried out via multilevel regression analyses and partial regression plotting for changes in the level of the gingival margin over time and interactions with the early (6-month) results of soft tissue phenotypic modification. RESULTS: One-hundred and fifty-seven treated sites in 83 patients were re-assessed at the long-term recall. AIC-driven model selection and regression analyses demonstrated that 6-month keratinized tissue width (KTW) and gingival thickness (GT) influenced the trajectory of the gingival margin similarly in a concave manner; however, GT was the driving determinant that predicted significantly less relapse in the treatments, with stability of the treated gingival margin obtained beyond values of 1.46 mm. CONCLUSIONS: Among a compliant patient cohort, irrespective of the rendered therapy, the presence of at least 1.5 mm KTW and 1.46 mm GT was correlated with the long-term stability of the gingival margin.

Molar Septum Expansion with Osseodensification for Immediate Implant Placement, Retrospective Multicenter Study with Up-to-5-Year Follow-Up, Introducing a New Molar Socket Classification.

The ideal positioning of immediate implants in molar extraction sockets often requires the osteotomy to be in the interradicular septum, which can be challenging in some cases, with traditional site preparation techniques. Patients who had undergone molar tooth extraction and immediate implant placement at five different centers, and followed up between August 2015 and September 2020, were evaluated. Inclusion criteria were use of the osseodensification technique for implant site preparation. The primary outcome was septum width measurement pre-instrumentation and osteotomy diameter post expansion. Clinical outcomes, such as implant insertion torque (ISQ) and implant survival rate, were also collected. A total of 131 patients, who received 145 immediate implants, were included. The mean overall septum width at baseline was 3.3 mm and the mean osteotomy diameter post instrumentation was 4.65 mm. A total of ten implants failed: seven within the healing period and three after loading; resulting in a cumulative implant survival rate of 93.1%. This retrospective study showed that osseodensification is a predictable method for immediate implant placement with interradicular septum expansion in molar extraction sockets. Furthermore, it allowed the introduction of a new molar socket classification. In the future, well-designed controlled clinical studies are needed to confirm these results and further explore the potential advantages of this technique.