RESUMO
The oxidation of wine may be beneficial or harmful to its quality. On the one hand, controlled oxidation can lead to the development of desirable sensory characteristics for red wine, such as enhanced color stability. Alternatively, oxidation can lead to white wine browning and a decrease in fruity aromas, and the development of an off flavor and wine polyphenols are also involved. The presence of glutathione (GSH) can help mitigate the negative effects of oxidation by acting as a protective antioxidant. In order to better understand the antioxidant role played by GSH, wine polyphenols oxidation experiments by electrochemical means in the presence of GSH were carried out. The oxidation behavior of polyphenols representing different phenolic classes commonly found in wines, including protocatechuic acid (PCA), caffeic acid (CAF), epicatechin (EC), and rutin (Ru), was investigated using cyclic voltammetry and bulk electrolysis. We identified the oxidation products and reaction pathways of these polyphenols using ultra-high-performance liquid chromatography coupled with mass spectrometry (UPLC-MS), in both the absence and the presence of glutathione (GSH). UPLC-MS was utilized to demonstrate that, in the presence of glutathione (GSH), the four molecules were subjected to electrochemical oxidation, resulting in the formation of mono- and bi-glutathione conjugates. A two-electron oxidation process combined with the removal of two protons is the first step in transforming polyphenol molecules. As a result, the corresponding quinone is formed. The quinone can then be reduced back to its original form by glutathione (GSH), or it can interact further with GSH to produce mono- and bi-glutathione conjugates. These results contribute to understanding and predicting the oxidative degradation pathway of polyphenols in wine. Understanding this process seems important for winemakers to control and optimize the sensory characteristics of their wines.
RESUMO
Recently, the growing demand for a renewable and sustainable fuel alternative is contingent on fuel cell technologies. Even though it is regarded as an environmentally sustainable method of generating fuel for immediate concerns, it must be enhanced to make it extraordinarily affordable, and environmentally sustainable. Hydrogen (H2 ) synthesis by electrochemical water splitting (ECWS) is considered one of the foremost potential prospective methods for renewable energy output and H2 society implementation. Existing massive H2 output is mostly reliant on the steaming reformation of carbon fuels that yield CO2 together with H2 and is a finite resource. ECWS is a viable, efficient, and contamination-free method for H2 evolution. Consequently, developing reliable and cost-effective technology for ECWS was a top priority for scientists around the globe. Utilizing renewable technologies to decrease total fuel utilization is crucial for H2 evolution. Capturing and transforming the fuel from the ambient through various renewable solutions for water splitting (WS) could effectively reduce the need for additional electricity. ECWS is among the foremost potential prospective methods for renewable energy output and the achievement of a H2 -based economy. For the overall water splitting (OWS), several transition-metal-based polyfunctional metal catalysts for both cathode and anode have been synthesized. Furthermore, the essential to the widespread adoption of such technology is the development of reduced-price, super functional electrocatalysts to substitute those, depending on metals. Many metal-premised electrocatalysts for both the anode and cathode have been designed for the WS process. The attributes of H2 and oxygen (O2 ) dynamics interactions on the electrodes of water electrolysis cells and the fundamental techniques for evaluating the achievement of electrocatalysts are outlined in this paper. Special emphasis is paid to their fabrication, electrocatalytic performance, durability, and measures for enhancing their efficiency. In addition, prospective ideas on metal-based WS electrocatalysts based on existing problems are presented. It is anticipated that this review will offer a straight direction toward the engineering and construction of novel polyfunctional electrocatalysts encompassing superior efficiency in a suitable WS technique.
RESUMO
The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO2 reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C3 N4 is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7â eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C3 N4 is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C3 N4 with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C3 N4 to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C3 N4 were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO2 reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C3 N4 based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.
RESUMO
Natural polyphenols are omnipresent and are an integral part of the human diet as well as quinones. Glutathione (GSH) is present in a significant amount inside cells and consequently, GSH conjugates of polyphenols will be encountered in the body. In the current work, voltammetry and liquid chromatography-mass spectrometry were carried out to characterize the reaction mechanism of the electrochemical oxidation of polyphenolic rosmarinic acid (RA) with GSH nucleophiles in aqueous solution. Electrochemical investigation of RA revealed that two consecutive transfer steps (which depend on pH) of two electrons and protons occur during the reversible oxidation of RA. Moreover, it was found that the first oxidation step is associated with the 3,4-dihydroxyphenyl lactic acid moiety, whereas the second oxidation step corresponds to the oxidation of the caffeic acid one. By using ultrahigh-performance liquid chromatography-diode array detection-mass spectrometry (UPLC-DAD-MS) in the negative ion mode, the oxidation pathways of RA in the presence of GSH were analyzed, and a total of four RA-GSH conjugates were identified. The oxidative degradation pathway of RA can be better apprehended and forecasted by the acquired results in this study.
Assuntos
Glutationa , Cromatografia Líquida , Cinamatos , Depsídeos , Eletroquímica , Glutationa/química , Glutationa/metabolismo , Humanos , Espectrometria de Massas , Ácido RosmarínicoRESUMO
A simple and sensitive poly(gallic acid)/multiwalled carbon nanotube modified glassy carbon electrode (PGA/MWCNT/GCE) electrochemical sensor was prepared for direct determination of the total phenolic content (TPC) as gallic acid equivalent. The GCE working electrode was electrochemically modified and characterized using scanning electron microscope (SEM), cyclic voltammetry (CV), chronoamperometry and chronocoulometry. It was found that gallic acid (GA) exhibits a superior electrochemical response on the PGA/MWCNT/GCE sensor in comparison with bare GCE. The results reveal that a PGA/MWCNT/GCE sensor can remarkably enhance the electro-oxidation signal of GA as well as shift the peak potentials towards less positive potential values. The dependence of peak current on accumulation potential, accumulation time and pH were investigated by square-wave voltammetry (SWV) to optimize the experimental conditions for the determination of GA. Using the optimized conditions, the sensor responded linearly to a GA concentration throughout the range of 4.97 × 10(-6) to 3.38 × 10(-5) M with a detection limit of 3.22 × 10(-6) M (S/N = 3). The fabricated sensor shows good selectivity, stability, repeatability and (101%) recovery. The sensor was successfully utilized for the determination of total phenolic content in fresh pomegranate juice without interference of ascorbic acid, fructose, potassium nitrate and barbituric acid. The obtained data were compared with the standard Folin-Ciocalteu spectrophotometric results.
RESUMO
To estimate the biological preference of synthetic small drugs towards DNA target, new metal based chemotherapeutic agents of nano-sized Cr(III), Fe(II), Co(II) and Ni(II) Schiff base complexes having N,N,O donor system were synthesized and thoroughly characterized by physic-chemical techniques. The redox behavior of the Cr(III), Fe(II) and Co(II) complex was investigated by electrochemical method using cyclic voltammetry. IR results proven that the tridentate binding of Schiff base ligand with metal center during complexation reflects the proposed structure. Magnetic and spectroscopic data give support to octahedral geometry for Cr(III) and Fe(II) complexes and tetrahedral geometry for Ni(II) and Co(II) complexes. The activation thermodynamic parameters, such as, E(â), ΔH(â), ΔS(â) and ΔG(â) are calculated using Coats-Redfern method by analyzing the TGA data. The particle size of the investigated metal complexes was estimated by TEM. In addition to, the interaction of the nanosized complexes with CT-DNA was estimated by electronic absorption, viscosity and gel electrophoresis. These techniques revealed that the complexes could bind to CT-DNA through intercalation mode. Moreover, the in vitro cytotoxic and antiviral activities of the nanosized complexes were checked against Herpes Simplex virus and Tobacco Mosaic viruses. Moreover, investigation of antioxidant activities of the new nanosized compounds was done by ABTS assay. Among the compounds tested, Fe(II) complex showed the strongest potent radical scavenging activity with percent of 58.60%. Furthermore, the antimicrobial bustle of the prepared compounds was screened against different types of bacteria and fungi and the results show that all metal complexes have superior activity than its free ligand.
Assuntos
Anti-Infecciosos/farmacologia , Antioxidantes/farmacologia , DNA/efeitos dos fármacos , Nanopartículas Metálicas/química , Naftalenos/química , Cromo/química , Cobalto/química , Cristalografia por Raios X , Técnicas Eletroquímicas , Compostos Ferrosos/química , Cinética , Ligantes , Testes de Sensibilidade Microbiana , Estrutura Molecular , Níquel/química , Análise Espectral , Termodinâmica , TermogravimetriaRESUMO
A polypyrrole-multiwalled carbon nanotubes modified glassy carbon electrode-based sensor was devised for determination of ferulic acid (FA). The fabricated sensor was prepared electrochemically using cyclic voltammetry (CV) and characterized using CV and scanning electron microscope (SEM). The electrode shows an excellent electrochemical catalytic activity towards FA oxidation. Under optimal conditions, the anodic peak current correlates linearly to the FA concentration throughout the range of 3.32 × 10-6 to 2.59 × 10-5 M with a detection limit of 1.17 × 10-6 M (S/N = 3). The prepared sensor is highly selective towards ferulic acid without the interference of ascorbic acid. The sensor applicability was tested for total content determination of FA in a commercial popcorn sample and showed a robust functionality.