Tunable higher-order orbital angular momentum using polarization-maintaining fiber.

For the first time, to the best of our knowledge, light with orbital angular momentum (OAM) of ±2ℏ per photon is produced using commercially available polarization-maintaining fiber with modal purity of 96%. Twist measurements demonstrate that the average orbital angular momentum can be continuously tuned between ±2ℏ. The authors consider beams of non-integer OAM, created using the presented method, as superpositions of integer OAM states.

Compact diode laser source for multiphoton biological imaging.

We demonstrate a compact, pulsed diode laser source suitable for multiphoton microscopy of biological samples. The center wavelength is 976 nm, near the peak of the two-photon cross section of common fluorescent markers such as genetically encoded green and yellow fluorescent proteins. The laser repetition rate is electrically tunable between 66.67 kHz and 10 MHz, with 2.3 ps pulse duration and peak powers >1 kW. The laser components are fiber-coupled and scalable to a compact package. We demonstrate >600 µm depth penetration in brain tissue, limited by laser power.

Simultaneous control of orbital angular momentum and beam profile in two-mode polarization-maintaining fiber.

We report simultaneous control of the orbital angular momentum (OAM) and beam profile of vortex beams generated in two-mode polarization-maintaining optical fiber. Two higher-order eigenmodes of the fiber are combined to form optical vortices. Reduced coherence between the fiber modes decreases the mode purity. Varying the coherence of the fiber modes changes the average OAM while maintaining a constant annular intensity profile. Additionally, a donut mode has been shown to be insensitive to bends and twists in the fiber.

Quantitative measurement of the orbital angular momentum of light with a single, stationary lens.

We show that the average orbital angular momentum (OAM) of twisted light can be measured simply and robustly with a single stationary cylindrical lens and a camera. Theoretical motivation is provided, along with self-consistent optical modeling and experimental results. In contrast to qualitative interference techniques for measuring OAM, we quantitatively measure non-integer average OAM in mode superpositions.

Continuously tunable orbital angular momentum generation using a polarization-maintaining fiber.

We demonstrate the generation of orbital angular momentum (OAM) in a two-mode polarization-maintaining (PM) optical fiber. We combine two linearly polarized modes of PM fiber to generate linearly polarized optical vortex beams with OAM. The average OAM can be finely varied by changing the phase between modes. We have quantitatively measured the resulting OAM to vary between ±1ℏ per photon while varying the relative phase between the LP11e- and LP11o-like fiber modes. The modal purity is 97%.

Electrowetting lenses for compensating phase and curvature distortion in arrayed laser systems.

We have demonstrated a one-dimensional array of individually addressable electrowetting tunable liquid lenses that compensate for more than one wave of phase distortion across a wavefront. We report a scheme for piston control using tunable liquid lens arrays in volume-bound cavities that alter the optical path length without affecting the wavefront curvature. Liquid lens arrays with separately tunable focus or phase control hold promise for laser communication systems and adaptive optics.

Measurement of the M² beam propagation factor using a focus-tunable liquid lens.

We demonstrate motion-free beam quality M² measurements of stigmatic, simple astigmatic, and general astigmatic (twisted) beams using only a focus-tunable liquid lens and a CCD camera. We extend the variable-focus technique to the characterization of general astigmatic beams by measuring the 10 second-order moments of the power density distribution for the twisted beam produced by passage through multimode optical fiber. Our method measures the same M² values as the traditional variable-distance method for a wide range of laser beam sources, including nearly TEM(00) (M²≈1) and general astigmatic multimode beams (M²≈8). The method is simple and compact, with no moving parts or complex apparatus and measurement precision comparable to the standard variable-distance method.

Simulation of electrowetting lens and prism arrays for wavefront compensation.

A novel application of electrowetting devices has been simulated: wavefront correction using an array of electrowetting lenses and prisms. Five waves of distortion can be corrected with Strehl ratios of 0.9 or higher, utilizing piston, tip-tilt, and curvature corrections from arrays of 19 elements and fill factors as low as 40%. Effective control of piston can be achieved by placing the liquid lens array at the focus of two microlens arrays. Seven waves of piston delay can be generated with variation in focal length between 1.5 and 500 mm.