Chronicles of plutonium peroxides: spectroscopic characterization of a new peroxo compound of Pu(IV).

Although hydrogen peroxide (H2O2) has been highly used in nuclear chemistry for more than 75 years, the preparation and literature description of tetravalent actinide peroxides remain surprisingly scarce. A new insight is given in this topic through the synthesis and thorough structural characterization of a new peroxo compound of Pu(IV).

Magnesium and magnesium alloy dissolution by high intensity focused ultrasound: erosion/cavitation vs. Wave propagation.

The dissolution of metals, influenced by mechanical and chemical factors, plays a crucial role in various applications. Ultrasonic irradiation has been explored for its ability to enhance dissolution rates and modify surface characteristics. In this study, we investigate the dissolution of magnesium (Mg) and magnesium alloys under high-intensity focused ultrasound (HIFU) conditions with frequency sweeping (wobbling). Our findings reveal distinct effects of cavitation and acoustic streaming on the dissolution process. For pure magnesium, ultrasonic treatment significantly increases dissolution rates compared to silent conditions. Negative frequency sweeps result in the highest dissolution rates, linked to increased cavitation activity, while positive sweeps reduce dissolution rates but maintain acoustic streaming effects. The removal of surface oxides is accelerated in all sonication conditions. Macro- and micro-roughness patterns on the surface correspond to the wobbling frequency range, with wavelengths matching the average ultrasonic frequency. However, dissolution is not uniform across the sample, and preferential attack occurs at the focal point during negative frequency sweeps. In contrast, magnesium alloys exhibit lower dissolution rates than pure Mg. The alloy's mechanical properties make it less susceptible to cavitation erosion but more sensitive to acoustic streaming-induced dissolution. Grain boundaries are preferentially attacked, revealing differences between ductile pure Mg and the harder, more cavitation-resistant, alloy. This study highlights the complex interplay between cavitation and acoustic streaming in the dissolution of magnesium and its alloys under HIFU conditions, shedding light on the limits and potential applications of this technique, particularly in microstructure analysis.

Micrometric drilling of (meta-)studtite square platelets formed by pseudomorphic conversion of UO2 under high-frequency ultrasound.

Pseudomorphic transformations are related to chemical conversions of materials while conserving their shape and structural features. Structuring ceramic shapes this way can be used to tailor the physico-chemical properties of materials that can benefit particular applications. In the context of spent nuclear fuel storage interacting with radiolysis products, the sonochemical behavior of powdered UO2 was investigated in dilute aqueous solutions saturated with Ar/(20 %)O2 (20 °C). Optimized parameter settings enabled the complete conversion of UO2 micrometric platelets into uranyl peroxide precipitates, referred to as (meta-)studtite [(UO2(O2)(H2O)2)xH2O] with x = 2 or 4. While the most acidic conditions yielded elongated crystal shapes in agreement with a dissolution/reprecipitation mechanism, softer conditions allowed the pseudomorphic transformation of the platelet shape oxide suggesting a complex formation mechanism. For specific conditions, this unprecedented morphology was accompanied with the formation of a hole in the platelet center. Investigations revealed that the formation of the drilled polymorphs is related to a perfect blend of H+, in-situ generation of H2O2 and high-frequency ultrasound, and is most probably related to the sono-capillary effect. These insights pave the way for new sonochemical approaches dedicated to the preparation of material polymorphs tailoring specific structural properties.

Ultrasonically controlled synthesis of UO2+x colloidal nanoparticles.

Actinide colloids and nanoparticles (NPs) currently constitute a topic of strong interest due to their potential role in advanced nuclear energetics and the environmental migration of radioactivity. A better understanding of the physico-chemical properties of nanoscale actinide oxides requires robust synthesis approaches. In this work, UO2+x NPs were successfully prepared by sonochemistry from U(IV) solutions previously stabilised in a hydrochloric medium (20 kHz, 65 °C, Ar/(10%)CO). Colloidal suspensions were found to be composed of crystalline and spherical NPs showing a UO2-like structure and measuring 18.0 ± 0.1 nm (SAXS, HR-TEM and PXRD techniques). In comparison with the controlled hydrolysis approach used as a reference, sonochemistry appears to be a simple and original synthesis route providing larger, better defined and more crystalline UO2+x NPs with a narrower size distribution. These well-defined NPs offer new opportunities for the preparation of reference actinide materials devoted to fundamental, technological and environmental studies.

Synthesis and multi-scale properties of PuO2 nanoparticles: recent advances and open questions.

Due to the increased attention given to actinide nanomaterials, the question of their structure-property relationship is on the spotlight of recent publications. Plutonium oxide (PuO2) particularly plays a central role in nuclear energetics and a comprehensive knowledge about its properties when nanosizing is of paramount interest to understand its behaviour in environmental migration schemes but also for the development of advanced nuclear energy systems underway. The element plutonium further stimulates the curiosity of scientists due to the unique physical and chemical properties it exhibits around the periodic table. PuO2 crystallizes in the fluorite structure of the face-centered cubic system for which the properties can be significantly affected when shrinking. Identifying the formation mechanism of PuO2 nanoparticles, their related atomic, electronic and crystalline structures, and their reactivity in addition to their nanoscale properties, appears to be a fascinating and challenging ongoing topic, whose recent advances are discussed in this review.

First observation of [Pu6(OH)4O4]12+ cluster during the hydrolytic formation of PuO2 nanoparticles using H/D kinetic isotope effect.

New insights are provided about the formation mechanism of PuO2 nanoparticles (NPs) by investigating an unprecedented kinetic isotope effect observed during their hydrolytic synthesis in H2O or D2O and attributed to OH/OD zero point energy difference. The signature of a Pu(IV) oxo-hydroxo hexanuclear cluster, appearing as an important intermediate during the formation of the 2 nm PuO2 NPs (synchrotron SAXS/XAS), is further revealed indicating that their formation is controlled by H-transfer reactions occurring during hydroxo to oxo-bridge conversions.

Sonoluminescence emission spectra of a 3.6 MHz HIFU in sweeping mode.

Use of sweeping mode with a 3.6 MHz High Intensity Focused Ultrasound (HIFU) allows cavitation activity to be controlled. This is especially true in the pre-focal zone where the high concentration of bubbles acts as an acoustic reflector and quenches cavitation above this area. Previous studies attributed the enhancement of cavitation activity under negative sweep to the activation of more bubble nuclei, requiring deeper investigations. After mapping this activity with SCL measurements, cavitation noise spectra were recorded. The behavior of the acoustic broadband noise follows the sonochemical one i.e., showing the same attenuation (positive scan) or intensification (negative scan) of cavitational activity. In 1 M NaCl 3.7 mM 2-propanol solution saturated by a mixture of Ar-15.5%O2-2.2%N2, intensities of SL spectra are high enough to allow detection of several molecular emissions (OH, NH, C2, Na) under negative frequency sweeps. This is the first report of molecular emissions at such high frequency. Their intensities are low, and they are very broad, following the trend obtained at fixed frequency up to 1 MHz. Under optimized conditions, CN emission chosen as a spectroscopic probe is strong enough to be simulated, which is reported for the first time at such high frequency. The resulting characteristics of the plasma do not show any spectral difference, so bubble nature is the same in the pre-and post-focal zone under different sweeping parameters. Consequently, SL and SCL intensification was not related to a change in plasma nature inside the bubbles but to the number of cavitation bubbles.

Simultaneous H/D and 13C/12C Anomalous Kinetic Isotope Effects during the Sonolysis of Water in the Presence of Carbon Monoxide.

Splitting of water molecules driven by ultrasound plays a central role in sonochemistry. While studies of sonoluminescence revealed the formation of a plasma inside the cavitation bubble, much less is known about the contribution of plasma chemical processes to the sonochemical mechanisms. Herein, we report for the first time sonochemical processes in water saturated with pure CO. The presence of CO causes a large increase in the H/D kinetic isotope effect (KIE) to αH = 14.6 ± 1.8 in a 10% H2O/D2O mixture under 20 kHz ultrasound. The anomalous H/D KIE is attributed to electron quantum tunneling in the plasma produced by cavitation. In addition, CO2 formed simultaneously with hydrogen during the sonochemical process is enriched with the 13C isotope, which indicates a V-V pumping mechanism typical for non-equilibrium plasma. Both observed KIEs unambiguously point to the contribution of quantum effects in sonochemical mechanisms.

Ultrasonically assisted conversion of uranium trioxide into uranium(vi) intrinsic colloids.

Under oxidizing conditions, the corrosion of spent nuclear fuel may lead to the leaching of radionuclides including soluble uranyl-based species. The speciation of the generated chemical forms is complex and the related potential formation of colloidal species appears surprisingly poorly reported in the literature. Their formation could however contribute significantly to the mobility of radionuclides in the environment. A better knowledge in the speciation and reactivity of these species appears particularly relevant. This study describes the preparation and characterization of intrinsic uranium(vi) colloids from amorphous and crystalline UO3 in pure water assisted by 20 kHz ultrasound. In the presence of carbon monoxide preventing the sonochemical formation of hydrogen peroxide, ultrasonic treatment boosts the conversion of UO3 powder into (meta-)schoepite precipitates and yields very stable and notably concentrated uranium(vi) nanoparticles in the liquid phase. Using HR-TEM, SAXS and XAS techniques, we confirmed that the colloidal suspension is composed of quasi-spherical nanoparticles measuring ca. 3.8 ± 0.3 nm and exhibiting a schoepite-like crystallographic structure. The proposed method demonstrates the possible formation of environmentally relevant U(vi) colloidal nanoparticles appearing particularly interesting for the preparation of reference systems in the absence of added ions and capping agents.

Impact of bubble coalescence in the determination of bubble sizes using a pulsed US technique: Part 2 - Effect of the nature of saturating gas.

Knowledge on cavitation bubble size distribution, ambient radius of bubbles is of interest for many applications that include therapeutic and diagnostic medicine. It however becomes a hard quest when increasing the ultrasonic frequency, when direct observation of bubble dynamics is no longer possible. An indirect method based on the estimation of the bubble dissolution time under pulsed ultrasound (362 kHz) is used here under optimized conditions to derive ambient radii of cavitation bubbles in water saturated with He, Ar, Xe, O2, N2 and air: 3.0 µm for Ar, 1.2 µm for He, 3.1 µm for Xe, 2.8 µm for O2, around 1 µm for N2 and air. If the pulse on-time is increased, bubble coalescence occurs, the extent of which is rather limited for Ar but extremely high for He or N2.

Impact of bubble coalescence in the determination of bubble sizes using a pulsed US technique: Part 1 - Argon bubbles in water.

A powerful experimental approach to measure the size distribution of bubbles active in sonoluminescence and/or sonochemistry is a technique based on pulsed ultrasound and sonoluminescence emission. While it is an accepted technique, it is still lacking an understanding of the effect of various experimental parameters, including the duration of the pulse on-time, the nature of the dissolved gas, the presence of a gas flow rate, etc. The present work, focusing on Ar-saturated water sonicated at 362 kHz, shows that increasing the pulse on-time leads to the measurement of coalesced bubbles. Reducing the on-time to a minimum and/or adding sodium dodecyl sulfate to water allows to reducing coalescence so that natural active cavitation bubble sizes can be measured. A radius of 2.9-3.0 µm is obtained in Ar-saturated water at 362 kHz. The effects of acoustic power and possible formation of a standing-wave on coalescence and measured bubble sizes are discussed.

Sonochemical decontamination of magnesium and magnesium-zirconium alloys in mild conditions.

UNGG cladding nuclear wastes constitute a huge volume of Mg-based materials that raises economic and safety concerns, particularly due to their radioactivity coupled to the potential generation of H2 gas under deep underground disposal. Their significant decontamination would result in more secure and less expensive storage, with a better containment of the separated long-lived radioisotopes that could enter in a classical channel. Sonication of genuine UNGG cladding materials and simulants at 345 kHz in 0.01 M oxalic acid solution (20 °C) allowed the structuring of their surfaces with the observation of homogeneously distributed craters of 20-40 µm in diameter. After a thorough characterization and comparison of the ultrasound effects generated at the surface, the various samples were artificially contaminated and characterized before sonication. The complete and rapid sonochemical decontamination of Mg-based materials was then observed, in addition to the removal of the carbon layer promoting corrosion on the inner UNGG cladding. The extension of sonication allows the neo-formed brucite (Mg(OH)2) and zirconium-based phases to accumulate on the surface, thus contributing in a slight but continuous surface recontamination process. This phenomenon results from the re-adsorption of uranyl cations from the solution which can be avoided by optimizing the duration of treatment.

Sonocatalytic degradation of EDTA in the presence of Ti and Ti@TiO2 nanoparticles.

The sonocatalytic degradation of EDTA (C0 = 5 10-3 M) in aqueous solutions was studied under 345 kHz (Pac = 0.25 W mL-1) ultrasound at 22-51 °C, Ar/20%O2, Ar or air, and in the presence of metallic titanium (Ti0) or core-shell Ti@TiO2 nanoparticles (NPs). Ti@TiO2 NPs have been obtained using simultaneous action of hydrothermal conditions (100-214 °C, autogenic pressure P = 1.0-19.0 bar) and 20 kHz ultrasound, called sonohydrothermal (SHT) treatment, on Ti0 NPs in pure water. Ti0 is composed of quasi-spherical particles (30-150 nm) of metallic titanium coated with a metastable titanium suboxide Ti3O. SHT treatment at 150-214 °C leads to the oxidation of Ti3O and partial oxidation of Ti0 and formation of nanocrystalline shell (10-20 nm) composed of TiO2 anatase. It was found that Ti0 NPs do not exhibit catalytic activity in the absence of ultrasound. Moreover, Ti0 NPs remain inactive under ultrasound in the absence of oxygen. However, significant acceleration of EDTA degradation was achieved during sonication in the presence of Ti0 NPs and Ar/20%O2 gas mixture. Coating of Ti0 with TiO2 nanocrystalline shell reduces sonocatalytic activity. Pristine TiO2 anatase nanoparticles do not show a sonocatalytic activity in studied system. Suggested mechanism of EDTA sonocatalytic degradation involves two reaction pathways: (i) sonochemical oxidation of EDTA by OH/HO2 radicals in solution and (ii) EDTA oxidation at the surface of Ti0 NPs in the presence of oxygen activated by cavitation event. Ultrasonic activation most probably occurs due to the local heating of Ti0/O2 species at cavitation bubble/solution interface.

Physical and chemical characterization of shock-induced cavitation.

A strong impact on a water surface induces a shock wave propagation with a significant pressure variation leading to cavitation bubble formation. A new shock induced cavitation reactor described in this work was characterized by physical and chemical techniques. Water hammer model verification with Joukowsky approach allowed to determine the wave speed propagation and gas fraction in water submitted to shock. These values were used for frequency analysis and compared with direct bubble visualization in order to estimate the influence of the experimental parameters on the shock-induced cavitation. Thereby, the shock wave contains a broad spectrum as decomposed into frequencies. This multi-frequency nature induces heterogeneous bubbles with calculated radii of 0.01 to 3.5 mm and observed radii of 0.01 to 2.8 mm depending on experimental conditions (initial pressure, impact height, gas atmosphere). For the first time, the formation of hydroxyl radicals was proven under impact-induced cavitation. The concentration of radicals increases with increasing number of successive impacts, reaching ca. 1.3 µmol.L-1 after 500 impacts in the presence of 20% O2-Ar as saturating gas. Radical generation seems to be relatively independent of the impact height but strongly depend on the type of gas saturating water, being substantially lower in the presence of air. Moreover, radical generation increases when decreasing the initial pressure and depends on the frequency at which water is impacted by the piston. Nevertheless, yield of OH radicals during shock-induced cavitation remains much lower than that produced by power ultrasound.

Sonochemical dissolution of nanoscale ThO2 and partial conversion into a thorium peroxo sulfate.

The influence of the sample morphology and experimental conditions towards the sonochemical dissolution of nanoscale ThO2 samples in sulfuric acid media is described. Significant sonochemical dissolution rates and yields are observed at 20 kHz under Ar/O2 atmosphere in dilute 0.5 M H2SO4 at room temperature, contrasting with the generally-reported high refractory behavior for ThO2. The dissolution of ThO2 combines the physical effects driven by acoustic cavitation phenomenon, the complexing affinity of Th(IV) in sulfuric medium and the sonochemical generation of H2O2. These sonochemical conditions further allow the observation of the partial conversion of ThO2 into a scarce Th(IV) peroxo sulfate with 1D morphology resulting from one or both following processes: dissolution/reprecipitation or formation of an intermediate Th(IV) surface complex.

Acoustic noise spectra under hydrothermal conditions.

Acoustic noise spectra were studied for the first time in overheated water using sonohydrothermal reactor operating at 20 kHz ultrasound in the temperature range from 25 to 200 °C at the autogenic pressure of 1-14 bar. The obtained results highlighted a dominating role of stable cavitation during ultrasonic treatment of hot water. Heating of sonicated water results in the formation of large number of nonlinearly oscillating bubbles synchronous with the driving frequency. At 200 °C, the acoustic spectra also display strong subharmonic and multiple ultraharmonic bands. Moreover, cavitation bubbles formed at 200 °C exhibit chaotic and random motions. It has been shown that the addition of TiO2 nanoparticles to hydrothermal water heated at 200 °C allows to eliminate subharmonic/ultraharmonic bands and stochastic oscillations as well. This effect was assigned to Pickering-like bubble stabilization due to the particle accumulation at the bubble surface.

Probing the local structure of nanoscale actinide oxides: a comparison between PuO2 and ThO2 nanoparticles rules out PuO2+x hypothesis.

Actinide research at the nanoscale is gaining fundamental interest due to environmental and industrial issues. The knowledge of the local structure and speciation of actinide nanoparticles, which possibly exhibit specific physico-chemical properties in comparison to bulk materials, would help in a better and reliable description of their behaviour and reactivity. Herein, the synthesis and relevant characterization of PuO2 and ThO2 nanoparticles displayed as dispersed colloids, nanopowders, or nanostructured oxide powders allow to establish a clear relationship between the size of the nanocrystals constituting these oxides and their corresponding An(iv) local structure investigated by EXAFS spectroscopy. Particularly, the first oxygen shell of the probed An(iv) evidences an analogous behaviour for both Pu and Th oxides. This observation suggests that the often observed and controversial splitting of the Pu-O shell on the Fourier transformed EXAFS signal of the PuO2 samples is attributed to a local structural disorder driven by a nanoparticle surface effect rather than to the presence of PuO2+x species.

Hypothesis about electron quantum tunneling during sonochemical splitting of water molecule.

Quantum tunneling in chemistry is often attributed to the processes at low or near room temperatures when the rate of thermal reactions becomes far less than the rate of quantum tunneling. However, in some rapid processes, quantum tunneling can be observed even at high temperatures. Herein, we report the experimental evidence for anomalous H/D kinetic isotope effect (KIE) during sonochemical dissociation of water molecule driven by 20 kHz power ultrasound measured in H2O/D2O mixtures saturated with Ar or Xe. Hydrogen released during ultrasonic treatment is enriched by light isotope. The observed H/D KIE (α = 2.15-1.50) is much larger than what is calculated assuming a classical KIE for Tg = 5000 K (α = 1.15) obtained from the sonoluminescence spectra in H2O and D2O. Furthermore, the α values sharply decrease with increasing of H2O content in H2O/D2O mixtures reaching a steady-state value close to α = 1.50, which also cannot be explained by O-H/O-D zero-point energy difference. We suggest that these results can be understood in terms of quantum electron tunneling occurring in nonequilibrium picosecond plasma produced at the last stage of cavitation bubble collapse. Thermal homolytic splitting of water molecule is inhibited by extremely short lifetime of such plasma. On the contrary, immensely short traversal time for electron tunneling in water allows H2O dissociation by quantum tunneling mechanism.

Effect of NaCl salt on sonochemistry and sonoluminescence in aqueous solutions.

The presence of salts in a solution is known to affect sonochemistry, but until now no consensus has been reached in the literature on how and why a salt influences sonochemistry. The present study focuses on the effect of NaCl on sonochemical activity and sonoluminescence at 362-kHz frequency in aqueous solutions saturated with He and Ar. It is shown that the presence of salt has a multiple impact: the global population of active bubbles decreases due to the decreasing gas solubility, new chemical reactions involving Na and Cl atoms occur that influence hydrogen and hydrogen peroxide yields and the standing wave component of the US wave is enhanced, favoring sonoluminescence emission. Interestingly, the effect of salt greatly depends on the nature of the saturating gas: for instance, strong acidification occurs under He, while it is limited under Ar.

Deciphering the Crystal Structure of a Scarce 1D Polymeric Thorium Peroxo Sulfate.

The preparation and structural characterization of an original Th peroxo sulfate dihydrate, crystallizing at room temperature in the form of stable 1D polymeric microfibres is described. A combination of laboratory and synchrotron techniques allowed solution of the structure of the Th(O2 )(SO4 )(H2 O)2 compound, which crystallizes in a new structure type in the space group Pna21 of the orthorhombic crystal system. Particularly, the peroxide ligand coordinates to the Th cations in an unusual µ3 -η2 :η2 :η2 bridging mode, forming an infinite 1D chain decorated with sulfato ligands exhibiting simultaneously monodentate and bidentate coordination modes.