Revision of the oxygen reduction reaction on N-doped graphenes by grand-canonical DFT.

Nitrogen-doped graphenes were among the first promising metal-free carbon-based catalysts for the oxygen reduction reaction (ORR). However, data on the most efficient catalytic centers and their catalytic mechanisms are still under debate. In this work, we study the associative mechanism of the ORR in an alkaline medium on graphene containing various types of nitrogen doping. The free energy profile of the reaction is constructed using grand-canonical DFT at a constant electrode potential in combination with an implicit electrolyte model. It is shown that the reaction mechanism differs from the generally accepted one and depends on the surface potential and doping type. In particular, as the potential decreases, coupled electron-proton transfer changes to sequential electron and proton transfer, and the potential at which this occurs depends on the doping type. It has been shown that oxygen chemisorption is the limiting step. The electrocatalytic mechanism of the nitrogen dopants involves reducing the oxygen chemisorption energy. Calculations predict that, at different potentials, different types of nitrogen impurities most effectively catalyze the ORR.

Roughness Factors of Electrodeposited Nanostructured Copper Foams.

Copper-based electrocatalytic materials play a critical role in various electrocatalytic processes, including the electroreduction of carbon dioxide and nitrate. Three-dimensional nanostructured electrodes are particularly advantageous for electrocatalytic applications due to their large surface area, which facilitates charge transfer and mass transport. However, the real surface area (RSA) of electrocatalysts is a crucial parameter that is often overlooked in experimental studies of high-surface-area copper electrodes. In this study, we investigate the roughness factors of electrodeposited copper foams with varying thicknesses and morphologies, obtained using the hydrogen bubble dynamic template technique. Underpotential deposition (UPD) of metal adatoms is one of the most reliable methods for estimating the RSA of highly dispersed catalysts. We aim to illustrate the applicability of UPD of lead for the determination of the RSA of copper deposits with hierarchical porosity. To find the appropriate experimental conditions that allow for efficient minimization of the limitations related to the slow diffusion of lead ions in the pores of the material and background currents of the reduction of traces of oxygen, we explore the effect of lead ion concentration, stirring rate, scan rate, monolayer deposition time and solution pH on the accuracy of RSA estimates. Under the optimized measurement conditions, Pb UPD allowed to estimate roughness factors as high as 400 for 100 µm thick foams, which translates into a specific surface area of ~6 m2·g-1. The proposed measurement protocol may be further applied to estimate the RSA of copper deposits with similar or higher roughness.

Maximizing Roughness Factors in Oxide-Derived Copper Coatings through Electrodeposition Parameters for Enhanced Electrocatalytic Performance.

The pursuit of novel techniques for obtaining dispersed copper-based catalysts is crucial in addressing environmental issues like decarbonization. One method for producing nanostructured metals involves the reduction of their oxides, a technique that has found widespread use in CO2 electroreduction. Currently, the intrinsic activities of oxide-derived copper electrocatalysts produced via different routes cannot be compared effectively due to the lack of information on electrochemically active surface area values, despite the availability of electrochemical methods that enable estimation of surface roughness for highly dispersed copper coatings. In this study, we aim to explore the potential of oxide-derived copper to achieve a high electrochemically active surface area by examining samples obtained from acetic and lactic acid deposition solutions. Our results revealed that Cu2O oxides had distinct morphologies depending on the electrodeposition solution used; acetate series samples were dense films with a columnar structure, while electrodeposition from lactic acid yielded a fine-grained, porous coating. The roughness factors of the electroreduced films followed linear relationships with the deposition charge, with significantly different slopes between the two solutions. Notably, a high roughness factor of 650 was achieved for samples deposited from lactic acid solution, which represents one of the highest estimates of electrochemically active surface area for oxide-derived copper catalysts. Our results highlight the importance of controlling the microstructure of the electrodeposited oxide electrocatalysts to maximize surface roughness.

Biodistribution of Mesenchymal Stromal Cells Labeled with [89Zr]Zr-Oxine in Local Radiation Injuries in Laboratory Animals.

BACKGROUND: Tracking the migration pathways of living cells after their introduction into a patient's body is a topical issue in the field of cell therapy. Questions related to studying the possibility of long-term intravital biodistribution of mesenchymal stromal cells in the body currently remain open. METHODS: Forty-nine laboratory animals were used in the study. Modeling of local radiation injuries was carried out, and the dynamics of the distribution of mesenchymal stromal cells labeled with [89Zr]Zr-oxine in the rat body were studied. RESULTS: the obtained results of the labelled cell distribution allow us to assume that this procedure could be useful for visualization of local radiation injury using positron emission tomography. However, further research is needed to confirm this assumption. CONCLUSIONS: intravenous injection leads to the initial accumulation of cells in the lungs and their subsequent redistribution to the liver, spleen, and kidneys. When locally injected into tissues, mesenchymal stromal cells are not distributed systemically in significant quantities.

Advantages of a Solid Solution over Biphasic Intercalation for Vanadium-Based Polyanion Cathodes in Na-Ion Batteries.

The efficient operation of metal-ion batteries in harsh environments, such as at temperatures below -20 °C or at high charge/discharge rates required for EV applications, calls for a careful selection of electrode materials. In this study, we report advantages associated with the solid solution (de)intercalation over the two-phase (de)intercalation pathway and identify the main sources of performance limitations originating from the two mechanisms. To isolate the (de)intercalation pathway as the main variable, we focused on two cathode materials for Na-ion batteries: a recently developed KTiOPO4-type NaVPO4F and a well-studied Na3V2(PO4)2F3. These materials have the same elemental composition, operate within the same potential range, and demonstrate very close ionic diffusivities, yet follow different (de)intercalation routes. To avoid any interpretation uncertainties, we obtained these materials in the form of particles with merely identical morphology and size. A detailed electrochemical study revealed a much lower capacity and energy density retention for phase-transforming Na3V2(PO4)2F3 compared to NaVPO4F, which exhibits a single-phase behavior over a wide range of Na concentrations. The reasons for the inferior rate capability and temperature tolerance for the phase-separating Na3V2(PO4)2F3 material should be affiliated with slow phase boundary propagation. We hope that the comprehensive information on limiting factors provided for both mechanisms is useful for the further optimization of electrode materials toward a new generation of high-power and low-temperature metal-ion batteries.

Effect of Radiation Therapy on Composition of Lymphocyte Populations in Patients with Primary Breast Cancer.

BACKGROUND: Radiation therapy (RT) is an important step in the treatment of primary breast cancer as it is one of the leading contributors to cancer incidence among women. Most patients with this disease acquire radiation-induced lymphopenia in the early post-radiation period; however, little is known about the effect of RT on the composition of lymphocyte populations in such patients. This study was aimed at investigating the effect of adjuvant remote RT-performed in the classical mode for patients with primary breast cancer-on the main components of cell-mediated immunity (major lymphocyte populations), including those in patients receiving chemotherapy. METHODS: Between 2020 and 2022, 96 patients with stage I-III breast cancer were included in this study. All patients in the final stage of complex treatment received RT via a 3D conformal technique (3DCRT). The clinical target volume of this RT included the breast or chest wall and locoregional lymphatics. Flow cytometry was used to assess the levels and phenotypes of circulating lymphocytes before and after RT (no more than 7 days before and after RT). The evaluation of the impact of polychemotherapy (PCT) was conducted to determine whether it was a risk factor for the onset of radio-induced lymphopenia (RIL) in the context of RT. RESULTS: When assessing the immune status in the general group of patients (n = 96), before the start of adjuvant external beam radiotherapy (EBRT), the average number of lymphocytes was 1.68 ± 0.064 × 109/L; after the course of adjuvant EBRT, it decreased to 1.01 ± 0.044 × 109/L (p < 0.001). When assessing the absolute indicators of cellular immunity in the general group of patients with BC after a course of adjuvant EBRT, significant dynamics were revealed by the changes in all cell populations of lymphocytes (paired t-test, p < 0.05). CONCLUSION: The adaptive immune system in breast cancer patients changed in the early post-radiation period. The absolute levels of B-, T- and natural killer cells significantly reduced after RT regardless of whether the patients previously underwent chemotherapy courses. RT for patients with primary breast cancer should be considered in clinical management because it significantly alters lymphocyte levels and should be considered when assessing antitumor immunity, as significant changes in T-cell immunity have been observed. In addition, the identified changes are critical if specific targeted therapy or immunotherapy is needed.

Safety profile of paediatric COVID-19 vaccines: An analysis of the US Vaccine Adverse Event Reporting System.

AIM: To provide further evidence on the safety profile of COVID-19 vaccines in paediatrics by analysing the spontaneous reports of adverse effects related to these vaccines. METHODS: Reports related to US paediatric population (from 0 to 17 years) vaccinated with authorised COVID-19 vaccines were extracted from Vaccine Adverse Event Reporting System from December 2020 to 17 November 2022. We conducted a descriptive analysis of Adverse Events Following Immunization (AEFI), calculating reporting rate of serious AEFIs and focusing on myocarditis and Guillain-Barré Syndrome after mRNA COVID-19 vaccines. RESULTS: Overall, 52 720 reports were retrieved: 77% (40541)-Pfizer-BioNTech, 19% (10083)-Moderna, a small proportion for other vaccines 4% (2096). Most of AEFIs were non-serious and listed in corresponding SPCs. Of serious AEFIs, 96% were related to the Pfizer-BioNTech vaccine. Roughly 91% (47874) were related to people from 6 to 17 years, a small percentage of 9% (4773) to the younger group (0-5 years). In both groups, most of the reports were related to mRNA vaccines and the percentage of AEFIs experienced by females were similar to males. CONCLUSIONS: Data showed that events most frequently reported were non-serious and listed in the corresponding SPCs, extending the evidence of safety of COVID-19 vaccines authorised in the United States in children.

Comparative Safety Profiles of Oncology Biosimilars vs. Originators in Europe: An Analysis of the EudraVigilance Database.

In the last decades, the clinical management of oncology patients has been transformed by the introduction of biologics. The high costs associated with the development and production of biologics limit patient access to these therapies. The expiration of exclusive patents for biologics has led to the development and market introduction of biosimilars, offering the reduction of costs for cancer treatments. Biosimilars are highly similar to the reference products in terms of structure, biological activity, efficacy, safety, and immunogenicity. Therefore, the monitoring of biosimilars' safety in real-world clinical practice though pharmacovigilance is essential. This study aimed to analyze the post-marketing pharmacovigilance data of biosimilar monoclonal antibodies used in oncology and compare them with respective reference products. Data of a 2-year period (1 January 2021-31 December 2022) were retrieved from EudraVigilance, and descriptive and comparative analysis were performed using the Reporting Odds Ratio to evaluate the distribution of medicine-reaction pairs related to biosimilars of three antitumor biological products and their corresponding reference products: bevacizumab, rituximab, and trastuzumab. The results showed that most frequently reported ADRs for biosimilars were non-serious and consistent with the safety profiles of reference products. These findings provide reassurance regarding safety equivalence of biosimilars and support their use as valid alternatives to originator biologics.

Evaluation of Changes in Some Functional Properties of Human Mesenchymal Stromal Cells Induced by Low Doses of Ionizing Radiation.

Each person is inevitably exposed to low doses of ionizing radiation (LDIR) throughout their life. The research results of LDIR effects are ambiguous and an accurate assessment of the risks associated with the influence of LDIR is an important task. Mesenchymal stromal cells (MSCs) are the regenerative reserve of an adult organism; because of this, they are a promising model for studying the effects of LDIR. The qualitative and quantitative changes in their characteristics can also be considered promising criteria for assessing the risks of LDIR exposure. The MSCs from human connective gingiva tissue (hG-MSCs) were irradiated at doses of 50, 100, 250, and 1000 mGy by the X-ray unit RUST-M1 (Russia). The cells were cultured continuously for 64 days after irradiation. During the study, we evaluated the secretory profile of hG-MSCs (IL-10, IDO, IL-6, IL-8, VEGF-A) using an ELISA test, the immunophenotype (CD45, CD34, CD90, CD105, CD73, HLA-DR, CD44) using flow cytometry, and the proliferative activity using the xCelligence RTCA cell analyzer at the chosen time points. The results of study have indicated the development of stimulating effects in the early stages of cultivation after irradiation using low doses of X-ray radiation. On the contrary, the effects of the low doses were comparable with the effects of medium doses of X-ray radiation in the long-term periods of cultivation after irradiation and have indicated the inhibition of the functional activity of MSCs.

Evaluation of the Efficiency of Photoelectrochemical Activity Enhancement for the Nanostructured LaFeO3 Photocathode by Surface Passivation and Co-Catalyst Deposition.

Perovskite-type lanthanum iron oxide, LaFeO3, is a promising photocathode material that can achieve water splitting under visible light. However, the performance of this photoelectrode material is limited by significant electron-hole recombination. In this work, we explore different strategies to optimize the activity of a nanostructured porous LaFeO3 film, which demonstrates enhanced photoelectrocatalytic activity due to the reduced diffusion length of the charge carriers. We found that surface passivation is not an efficient approach for enhancing the photoelectrochemical performance of LaFeO3, as it is sufficiently stable under photoelectrocatalytic conditions. Instead, the deposition of a Pt co-catalyst was shown to be essential for maximizing the photoelectrochemical activity both in hydrogen evolution and oxygen reduction reactions. Illumination-induced band edge unpinning was found to be a major challenge for the further development of LaFeO3 photocathodes for water-splitting applications.

Development of vanadium-based polyanion positive electrode active materials for high-voltage sodium-based batteries.

Polyanion compounds offer a playground for designing prospective electrode active materials for sodium-ion storage due to their structural diversity and chemical variety. Here, by combining a NaVPO4F composition and KTiOPO4-type framework via a low-temperature (e.g., 190 °C) ion-exchange synthesis approach, we develop a high-capacity and high-voltage positive electrode active material. When tested in a coin cell configuration in combination with a Na metal negative electrode and a NaPF6-based non-aqueous electrolyte solution, this cathode active material enables a discharge capacity of 136 mAh g-1 at 14.3 mA g-1 with an average cell discharge voltage of about 4.0 V. Furthermore, a specific discharge capacity of 123 mAh g-1 at 5.7 A g-1 is also reported for the same cell configuration. Through ex situ and operando structural characterizations, we also demonstrate that the reversible Na-ion storage at the positive electrode occurs mostly via a solid-solution de/insertion mechanism.

Resolving the Seeming Contradiction between the Superior Rate Capability of Prussian Blue Analogues and the Extremely Slow Ionic Diffusion.

The superior rate capabilities of metal ion battery materials based on Prussian blue analogues (PBAs) are almost exclusively ascribed to the extremely fast solid-state ionic diffusion, which is possible due to structural voids and spacious three-dimensional channels in PBA structures. We performed a detailed electroanalytical study of alkali ion diffusivities in nanosized cation-rich and cation-poor PBAs obtained as particles or electrodeposited films in both aqueous and non-aqueous media, which resulted in a solid conclusion about the exceptionally slow ionic transport. We show that the impressive rate capability of PBA materials is determined solely by the small size of the primary particles of PBAs, while the apparent diffusion coefficients are 3-5 orders of magnitude lower than those reported in earlier studies. Our finding calls for a reconsideration of the apparent facility of ionic transport in PBA materials and deeper analysis of the charge carrier-host interactions in PBAs.

Enhancement of Catalytic Activity and Stability of La0.6Ca0.4Fe0.7Ni0.3O2.9 Perovskite with ppm Concentration of Fe in the Electrolyte for the Oxygen Evolution Reaction.

The catalytic activity and stability of an iron-nickel based oxygen-deficient perovskite for the oxygen evolution reaction (OER) are drastically improved with the ppm additive of Fe ions to the alkaline electrolyte. The enhancement is attributed to a 1-2 nm restructured Ni0.5Fe0.5Ox(OH)2-x (oxy)hydroxide layer, as demonstrated with scanning transmission electron microscopy. La0.6Ca0.4Fe0.7Ni0.3O2.9 shows almost a four-fold increase in OER activity after Fe addition relative to the as-prepared pristine electrolyte, which demonstrates the low Tafel slope of 44 ± 2.4 mV dec-1 and the superior intrinsic activity of 706 ± 71 A g-1oxide at 1.61 V vs. RHE.

α-TiPO4 as a Negative Electrode Material for Lithium-Ion Batteries.

To realize high-power performance, lithium-ion batteries require stable, environmentally benign, and economically viable noncarbonaceous anode materials capable of operating at high rates with low strain during charge-discharge. In this paper, we report the synthesis, crystal structure, and electrochemical properties of a new titanium-based member of the MPO4 phosphate series adopting the α-CrPO4 structure type. α-TiPO4 has been obtained by thermal decomposition of a novel hydrothermally prepared fluoride phosphate, NH4TiPO4F, at 600 °C under a hydrogen atmosphere. The crystal structure of α-TiPO4 is refined from powder X-ray diffraction data using a Rietveld method and verified by electron diffraction and high-resolution scanning transmission electron microscopy, whereas the chemical composition is confirmed by IR, energy-dispersive X-ray, electron paramagnetic resonance, and electron energy loss spectroscopies. Carbon-coated α-TiPO4/C demonstrates reversible electrochemical activity ascribed to the Ti3+/Ti2+ redox transition delivering 125 mAh g-1 specific capacity at C/10 in the 1.0-3.1 V versus Li+/Li potential range with an average potential of ∼1.5 V, exhibiting good rate capability and stable cycling with volume variation not exceeding 0.5%. Below 0.8 V, the material undergoes a conversion reaction, further revealing capacitive reversible electrochemical behavior with an average specific capacity of 270 mAh g-1 at 1C in the 0.7-2.9 V versus Li+/Li potential range. This work suggests a new synthesis route to metastable titanium-containing phosphates holding prospective to be used as negative electrode materials for metal-ion batteries.

The Misconception of Mg2+ Insertion into Prussian Blue Analogue Structures from Aqueous Solution.

Prussian blue analogues (PBAs) are commonly believed to reversibly insert divalent ions, such as calcium and magnesium, rendering them as perspective cathode materials for aqueous magnesium-ion batteries. In this study, the occurrence of Mg2+ insertion into nanosized PBA materials is shown to be a misconception and conclusive evidence is provided for the unfeasibility of this process for both cation-rich and cation-poor nickel, iron, and copper hexacyanoferrates. Based on structural, electrochemical, IR spectroscopy, and quartz crystal microbalance data, the charge compensation of PBA redox can be attributed to protons rather than to divalent ions in aqueous Mg2+ solution. The reversible insertion of protons involves complex lattice water rearrangements, whereas the presence of Mg2+ ion and Mg salt anion stabilizes the proton (de)insertion reaction through local pH effects and anion adsorption at the PBA surface. The obtained results draw attention to the design of proton-based batteries operating in environmentally benign aqueous solutions with low acidity.

Evaluation of the Effectiveness of Mesenchymal Stem Cells of the Placenta and Their Conditioned Medium in Local Radiation Injuries.

BACKGROUND: The search for an effective therapy for local radiation injuries (LRI) is urgent; one option is mesenchymal stem cells (MSC) derived from the placenta and their conditioned medium for the regenerative processes of the skin. METHODS: We used 80 animals, randomly assigned to four groups: control (C) animals that did not receive therapy; control with the introduction of culture medium concentrate (CM); introduction of MSCs (PL); introduction of CMPL. LRI modeling was performed on an X-ray machine at a dose of 110 Gy. Histological and immunohistochemical tests were performed. RESULTS: On the 112th day, the area of the open wound surface in the CMPL group was 6.7 times less than in the control group. Complete healing of the open wound surface of the skin in the CM group was observed in 40%, in CMPL 60%, in the PL group 20%, and in the C group there were no animals with a prolonged wound defect. A decrease in inflammatory processes was observed in the CMPL group. CONCLUSIONS: the use of a concentrate of conditioned MSCs (CMPL group) in severe LRI in laboratory animals accelerates the transition of the wound process to the stage of regeneration and epithelization.

Monoclinic α-Na2FePO4F with Strong Antisite Disorder and Enhanced Na+ Diffusion.

A new monoclinic α-polymorph of the Na2FePO4F fluoride-phosphate has been directly synthesized via a hydrothermal method for application in metal-ion batteries. The crystal structure of the as-prepared α-Na2FePO4F studied with powder X-ray and neutron diffraction (P21/c, a = 13.6753(10) Å, b = 5.2503(2) Å, c = 13.7202(8) Å, ß = 120.230(4)°) demonstrates strong antisite disorder between the Na and Fe atoms. As revealed with DFT-based calculations, α-Na2FePO4F has low migration barriers for Na+ along the main pathway parallel to the b axis, and an additional diffusion bypass allowing the Na+ cations to go around the Na/Fe antisite defects. These results corroborate with the extremely high experimental Na-ion diffusion coefficient of (1-5)·10-11 cm2·s-1, which is 2 orders of magnitude higher than that for the orthorhombic ß-polymorph ((5-10)·10-13 cm2·s-1). Being tested as a cathode material in Na- and Li-ion battery cells, monoclinic α-Na2FePO4F exhibits a reversible specific capacity of 90 and 80 mAh g-1, respectively.

High-level expression of biologically active human follicle stimulating hormone in the Chinese hamster ovary cell line by a pair of tricistronic and monocistronic vectors.

Recombinant human follicle stimulating hormone (FSH), produced in Chinese hamster ovary (CHO) cells, is widely used for treatment of fertility disorders and is subject to biosimilars development. Cell lines with high specific productivities may simplify the FSH production process. Here, we used our previously established expression system based on vector p1.1 to create new cell lines secreting heterodimeric FSH protein. To this end, we linked open reading frames of both FSH subunits by the wild-type internal ribosome entry site from the encephalomyocarditis virus (EMCV IRES). Intact and double-negative for the dihydrofolate reductase CHO cells were stably transfected by the FSH-coding plasmids. Stably transfected intact cells showed higher level of the FSH secretion and were utilized for subsequent methotrexate-driven transgene amplification, which doubled their productivity. The excess of the free α-subunit was corrected by transfecting the cells by the additional p1.1-based plasmid encoding the ß-subunit of the FSH. Clonal cell lines obtained secreted mostly the heterodimeric FSH and possessed specific productivities up to 12.3±1.7 pg/cell/day. Candidate clonal cell line C-P1.3-FSH-G4 maintained a constant specific productivity for at least 2 months of culturing without the section pressure. The resulting FSH protein conformed to the international pharmaceutical quality criteria as evidenced by the receptor binding kinetics, distribution pattern of hormone isoforms and biological activity. In conclusion, our expression system offers a simple and cost-effective approach to production of FSH.

α-VPO4: A Novel Many Monovalent Ion Intercalation Anode Material for Metal-Ion Batteries.

In this paper, we report on a novel α-VPO4 phosphate adopting the α-CrPO4 type structure as a promising anode material for rechargeable metal-ion batteries. Obtained by heat treatment of a structurally related hydrothermally prepared KTiOPO4-type NH4VOPO4 precursor under reducing conditions, the α-VPO4 material appears stable in a wide temperature range and possesses an interesting "sponged" needle-like particle morphology. The electrochemical performance of α-VPO4 as the anode material was examined in Li-, Na-, and K-based cells. The carbon-coated α-VPO4/C composite exhibits 185, 110, and 37 mA h/g specific capacities respectively at the first discharge and around 120, 80, and 30 mA h/g at consecutive cycles at a C/10 rate. The considerable capacity drop after the first cycle in Li and Na cells is presumably due to irreversible alkali ion consumption taking place upon alkali-ion de/insertion. The EDX analysis of the recovered electrodes revealed an uptake of ∼23% of Na after the first discharge with significant cell parameter alteration validated by operando XRD measurements. In contrast to the known ß-VPO4 anode materials, both Li and Na de/insertion into the new α-VPO4 proceed via an intercalation mechanism with the parent structural framework preserved but not via a conversion mechanism. The dimensionality of alkali-ion migration pathways and diffusion energy barriers was analyzed by the BVEL approach. Na-ion diffusion coefficients measured by the potentiostatic intermittent titration technique are in the range of (0.3-1.0)·10-10 cm2/s, anticipating α-VPO4 as a prospective high-power anode material for Na-ion batteries.

Clonal chromosomal and genomic instability during human multipotent mesenchymal stromal cells long-term culture.

BACKGROUND AIMS: Spontaneous mutagenesis often leads to appearance of genetic changes in cells. Although human multipotent mesenchymal stromal cells (hMSC) are considered as genetically stable, there is a risk of genomic and structural chromosome instability and, therefore, side effects of cell therapy associated with long-term effects. In this study, the karyotype, genetic variability and clone formation analyses have been carried out in the long-term culture MSC from human gingival mucosa. METHODS: The immunophenotype of MSC has been examined using flow cytofluorometry and short tandem repeat (STR) analysis has been carried out for authentication. The karyotype has been examined using GTG staining and mFISH, while the assessment of the aneuploidy 8 frequency has been performed using centromere specific chromosome FISH probes in interphase cells. RESULTS: The immunophenotype and STR loci combination did not change during the process of cultivation. From passage 23 the proliferative activity of cultured MSCs was significantly reduced. From passage 12 of cultivation, clones of cells with stable chromosome aberrations have been identified and the biggest of these (12%) are tetrasomy of chromosome 8. The random genetic and structural chromosomal aberrations and the spontaneous level of chromosomal aberrations in the hMSC long-term cultures were also described. CONCLUSIONS: The spectrum of spontaneous chromosomal aberrations in MSC long-term cultivation has been described. Clonal chromosomal aberrations have been identified. A clone of cells with tetrasomy 8 has been detected in passage 12 and has reached the maximum size by passage 18 before and decreased along with the reduction of proliferative activity of cell line by passage 26. At later passages, the MSC line exhibited a set of cells with structural variants of the karyotype with a preponderance of normal diploid cells. The results of our study strongly suggest a need for rigorous genetic analyses of the clone formation in cultured MSCs before use in medicine.