RESUMO
Aromatic amines (AAs), a characteristic pollutant with electron-donating groups in textile industry, having high reactivity with reactive chlorine free radicals, is probably the precursor of chlorinated aromatic products in advanced oxidation treatment. In this study, Fe2+/peroxydisulfate (PDS)/Cl- and Fe2+/H2O2/Cl-systems were used to treat four kinds of AAs (5-Nitro-o-toluidine (NT), 4-Aminoazobenzol (AAB), O-Aminoazotoluene (OAAT), 4,4'-Methylene-bis(2-chloroaniline) (MBCA)) in simulated wastewater, and the selectivity of various reactive species to AAs, the oxidation law and pathway of AAs were explored. The results showed that dichloride anion radical (Cl2·-) could effectively oxidize four AAs, and chlorine radical (·Cl) was strongly reactive to AAB and MBCA, especially MBCA. The largest f - (Fukui function) of MBCA is 0.0822, which is the lowest of the four AAs, so ·Cl might be more sensitive to electrophilic point than hydroxyl radical (·OH). The oxidation pathway of NT and MBCA showed that ·Cl mainly played the role of electron transfer to AAs instead of generating chlorinated products, but the addition of ·OH to -NH2 generated aromatic nitro compounds with higher toxicity than NT and MBCA. Therefore, the electron transfer of ·Cl and Cl2·- could not only improve the removal of AAs but also reduce the generation of toxic products. This study found that the reactivity of reactive chlorine free radicals was not necessarily related to chlorination, which provided a theoretical basis for the further studies into the formation mechanism of chlorination products.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Cloro , Águas Residuárias , Peróxido de Hidrogênio , Poluentes Químicos da Água/análise , Purificação da Água/métodos , Oxirredução , Cloretos , Aminas , Catálise , Raios UltravioletaRESUMO
In the oxidation treatment of textile dyeing sludge, the quantitative and transformation laws of organic chlorine are not clear enough. Thus, this study mainly evaluated the treatment of textile dyeing sludge by Fenton and Fenton-like system from the aspects of the influence of Cl-, the removal of polycyclic aromatic hydrocarbons (PAHs) and organic carbon, and the removal and formation mechanism of organic chlorine. The results showed that the organic halogen in sludge was mainly hydrophobic organic chlorine, and the content of adsorbable organic chlorine (AOCl) was 0.30 mg/g (dry sludge). In the Fenton system with pH=3, 500 mg/L Cl-, 30 mmol/L Fe2+ and 30 mmol/L H2O2, the removal of phenanthrene was promoted by chlorine radicals (â¢Cl), and the AOCl in sludge solid phase increased to 0.55 mg/g (dry sludge) at 30 min. According to spectral analysis, it was found that â¢Cl could chlorinate aromatic and aliphatic compounds (excluding PAHs) in solid phase at the same time, and eventually led to the accumulation of aromatic chlorides in solid phase. Strengthening the oxidation ability of Fenton system increased the formation of organic chlorines in liquid and solid phases. In weak acidity, the oxidation and desorption of superoxide anion promoted the removal and migration of PAHs and organic carbon in solid phase, and reduced the formation of total organic chlorine. The Fenton-like system dominated by non-hydroxyl radical could realize the mineralization of PAHs, organic carbon and organic chlorines instead of migration. This paper builds a basis for the selection of sludge conditioning methods.
Assuntos
Hidrocarbonetos Policíclicos Aromáticos , Esgotos , Esgotos/química , Cloretos , Peróxido de Hidrogênio/química , Cloro , Têxteis , Halogênios , Oxirredução , CarbonoRESUMO
The magnetization roasting with coal as primary reductants adds cost and causes environmental pollution. Therefore, it is of great importance to investigate the biomass application as a reductant for magnetization roasting to recover iron from low-utilization iron tailings for emission mitigation and green utilization. This study systematically investigated the impact of biomass (pyrolysis gas from agricultural and forestry waste) as a reductant on the conversion of iron tailings to magnetite in magnetization roasting. Additionally, the thermal decomposition of biomass, phase transformation and microstructure evolution of iron tailings were analyzed by TG, XRD, BET, and other methods to elucidate the conversion mechanism for facilitating magnetized hematite in iron tailings with biomass-derived gas. The results showed that woody biomass was a more appropriate reductant for magnetization roasting; 650 °C was the optimal temperature for the complete transformation of hematite to magnetite by reduction roasting with biomass waste. Through magnetic separation, the concentrate with an iron grade of 62.04% and iron recovery of 95.29% was obtained, and the saturation magnetization was enhanced from 0.60 emu/g to 58.03 emu/g of iron tailings. During the magnetization roasting, CO and H2 generated from biomass reduced the hematite in tailings particles from interior to exterior, forming a loose structure with rich microfissures, facilitating the subsequent separation operations. This study offers a novel reference for applying biomass to exploit hematite minerals and shows the potential of biomass for energy savings and emission reduction in the utilization of iron tailing resources.
Assuntos
Ferro , Substâncias Redutoras , Biomassa , Óxido Ferroso-Férrico , Ferro/química , MagnetismoRESUMO
Nitrogenization is an effective method for improving the capacitive deionization (CDI) performance of porous carbon materials. In particular, polymer organic frameworks with heteroatom doping, containing an ordered pore structure and excellent electrochemical stability, are ideal precursors for carbon materials for high-performance CDI. In this study, a nitrogen-enriched micro-mesoporous carbon (NMC) electrode was fabricated by carbonizing a Schiff base network-1 at 500, 600, and 700 °C. Scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, N2 adsorption-desorption, the contact angle of water, cyclic voltammetry, and electrochemical impedance spectroscopy were used to characterize the morphological structure, wettability, Brunauer-Emmett-Teller surface areas, and electrochemical performance of the NMCs. The results showed that the NMC carbonized at 600°C achieved the best specific capacitance (152.33 F/g), as well as a high electrosorption capacity (25.53 mg/g) because of its chemical composition (15.57% N) and surface area (312 m2/g). These findings prove that NMC is viable as an electrode material for desalination by high-performance CDI applications.
Assuntos
Carbono , Polímeros , Capacitância Elétrica , Eletrodos , NitrogênioRESUMO
Chlorophenols (CPs) are toxic contaminants that tend to accumulate in textile dyeing sludge and pose a threat to the environment through the disposal process. To comprehensively evaluate CPs in sludge, the characteristics and risks of CPs from five textile dyeing plants (TDPs) were investigated in this study. The total concentration of 19 CPs (Σ19 CPs) varied from 170.90 to 6290.30 ng g-1 dry weight (dw), among which high-chlorine phenols accounted for the greatest proportion. The ecological screening level (ESL) of CPs was used to judge their pollution levels, while the risk quotient (RQ) value and dioxin conversion rate were used to analyze their potential risk. The results indicated that CPs may pose a moderate to high risk to the environment. The Fenton process was used to condition the hazardous sludge, and a higher content of CPs was found after conditioning. A lower rate of CP increase was achieved with a reagent dose of 180 mmol/L, H2O2:Fe2+ = 1:1, pH of 3-4 and reaction time of 30 min. In summary, the work helps to address the general knowledge gap in the textile dyeing industry and provides a reference for further research.
Assuntos
Clorofenóis , Esgotos , Peróxido de Hidrogênio , Indústria Têxtil , TêxteisRESUMO
The main content of this work is to investigate the removal of polycyclic aromatic hydrocarbons (PAHs: phenanthrene, anthracene, and fluoranthene) from simulated sludge solid phase employing an Fenton/Cl- system under various Cl- contents and pH values. The steady-state concentrations of the hydroxyl, chlorine, and dichloride anion radicals ([·OH]ss, [·Cl]ss, and [Cl2·-]ss) in heterogeneous system were first measured using tert-butanol, nitrobenzene, and benzoic acid. The outcomes exhibited that increasing the Cl- content from 50 to 2000 mg/L (pH = 3.0) or raising the pH from 3.0 to 5.0 (1000 mg/L Cl-) caused [·OH]ss to continuously decrease and [Cl2·-]ss and the concentration of superoxide anions (HO2·/O2·-) to continuously increase. When the pH was 3.0 and the Cl- concentration was 1000 mg/L, [·Cl]ss had a maximum value of 9.27 × 10-14 M. Combining the results of PAH removal, radical quenching, and product analysis, it was found that ·Cl in the Fenton/Cl- system promoted the oxidative degradation of phenanthrene without forming chlorination byproducts. Furthermore, HO2·/O2·- was helpful in removing anthracene and fluoranthene. Under the environment of high Cl- content (≥1000 mg/L), PAHs could be removed more effectively by using HO2·/O2·-. This investigation underpins further study on the regulation of reactive species and the efficient degradation of target organic matter in Fenton/Cl- system, and provides a basis for studying the formation of chlorinated or toxic byproducts in the process of treating textile dyeing sludge by Fenton.
Assuntos
Hidrocarbonetos Policíclicos Aromáticos , Esgotos , Cloro , Superóxidos , TêxteisRESUMO
In this study, polycyclic aromatic hydrocarbons (PAHs) at practical concentrations in the simulated sludge treated by the Fe2+/H2O2 and Fe2+/peroxymonosulfate (PMS) systems were evaluated in terms of the PAHs (phenanthrene, anthracene, fluoranthene) removal, element migration, Cl- effect, and chlorination by-product formation. The results indicated that according to the removal rate of PAHs, the optimal dosage of the Fe2+/PMS system (∑PAHs removal rate was 64.66⯱â¯2.82 %) was 1/30 of that for the Fe2+/H2O2 system (∑PAHs removal rate was 78.63⯱â¯0.38 %). The elemental contents in the simulated sludge were mainly affected by the extent of advanced oxidation and the amount of generated iron flocs. By studying the PAHs removal, free chlorine formation, total organochlorine content, and PAHs products in Fe2+/H2O2/Cl- and Fe2+/PMS/Cl- systems, it was found that chlorine radicals (·Cl) had high reactivity with phenanthrene and fluoranthene, whereas dichloride anion radicals (Cl2·-) exhibited the opposite behavior. Furthermore, PAHs were oxidized by ·Cl and hydroxyl radical in the Fe2+/H2O2/Cl- system, whereas PAHs and their products were chlorinated by free chlorine and ·Cl in the Fe2+/PMS/Cl- system to six chlorinated by-products such as Cl-PAHs (9-Cl-phenanthrene, 2-Cl-anthracene, 9,10-Cl2-anthracene, 3-Cl-fluoranthene). These results provide some useful suggestions for the safe advanced oxidation process treatment of textile dyeing sludge.
RESUMO
This research aimed to evaluate the alga Scenedesmus obliquus toxicity induced by textile-dyeing effluents (TDE). The toxicity indicator of TDE in alga at the physiological (algal growth), biochemical (chlorophyll-a (Chl-a) synthesis and superoxide dismutase (SOD) activity) and structural (cell membrane integrity) level were investigated. Then we further study the relationship among toxicity indicators at physiological and biochemical level, and supplemented by research on algal biomacromolecules. According to the analysis of various endpoints of the alga, the general sensitivity sequence of toxicity endpoints of Scenedesmus obliquus was: SOD activity > Chl-a synthesis > algal growth. The stimulation rate of SOD activity increased from day 3 (57.25%~83.02%) to day 6 (57.25%~103.81%), and then decreased on day 15 (-4.23%~-32.96%), which indicated that the antioxidant balance system of the algal cells was destroyed. The rate of Chl-a synthesis inhibition increased gradually, reaching 19.70%~79.39% on day 15, while the rate of growth inhibition increased from day 3 (-12.90%~10.16%) to day 15 (-21.27%~72.46%). Moreover, the algal growth inhibition rate was positively correlated with the inhibition rate of SOD activity or Chl-a synthesis, with the correlation coefficients were 0.6713 and 0.5217, respectively. Algal cells would be stimulating to produce excessive reactive oxygen species, which would cause peroxidation in the cells, thereby destroying chloroplasts, inhibiting chlorophyll synthesis and reducing photosynthesis. With increasing exposure time, irreversible damage to algae can lead to death. This study is expected to enhance our understanding of the ecological risks through algal tests caused by TDE.
Assuntos
Scenedesmus , Poluentes Químicos da Água/análise , Clorofila , Clorofila A , Têxteis , Águas ResiduáriasRESUMO
Ion-exchange polymer and modified carbonization bacterial cellulose (CBC) electrodes were fabricated using varying amounts of cation-exchange polymers (glutaric acid (GA) and sulfosuccinic acid (SSA)) and assembled within an asymmetric capacitive deionization unit (p-CDI). The performance of selective NO2- electro-adsorption was studied. The AC/CBC-SSA group showed a better salt adsorption capacity (14.56 mg/g) and nitrite removal efficiency (71.01%) than the AC/CBC-GA (10.72 mg/g, 47.83%) and AC/AC (4.81 mg/g, 12.74%) groups. It was confirmed that the CBC-SSA/GA electrodes enhanced nitrite selectivity and increased the adsorption capacity, and the total amounts of adsorbed anions increased when the applied voltage was increased from 0.8 to 1.2 V, while the molar fraction of nitrate decreased. The competitive and preferential adsorption of anions was further investigated using different binary solutions of anions and occurred in the following sequence: NO2- >SO42- >NO3- >F-≈ Cl-. Furthermore, the p-CDI units were applied to remove nitrite in real wastewater samples, and the results showed that they had excellent reusability and application for use in dyeing wastewater treatment.
Assuntos
Águas Residuárias , Purificação da Água , Adsorção , Celulose , Eletrodos , Íons , Nitritos , Polímeros , ÁguaRESUMO
Chlorobenzenes (CBs) present in synthetic dyes are discharged into natural waters during the treatment of textile dyeing wastewater, which may have adverse effects on human and environment. In this study, the existence and removal of 12 CBs in different units of five treatment plants were examined. The ecological risk of CBs in textile dyeing wastewater was assessed by ambient severity (AS) and risk quotients (RQs). The results showed that trichlorobenzene, tetrachlorobenzene, pentachlorobenzene and hexachlorobenzene were ubiquitous in textile dyeing wastewater, and their distribution was similar. In one of the plants, the content of hexachlorobenzene was found to be as high as 9.277 µg/L in the raw water, which was an oil-water mixture. In other plants, there was no significant difference in the content and composition of CBs among influent and effluent suggesting that the conventional wastewater treatment plants cannot improve the existence of them. Monochlorobenzene and dichlorobenzene were not detected, which may have been related to strong volatility, biochemical properties, and weak instrument sensitivity. In the treatment process and effluent, trichlorobenzene is the main pollutant and accounted for 39.51% of all CB. CB removal was found only in the anaerobic system, while the aerobic system did not have the corresponding removal effect on CB and total organic carbon. According to ecological risk assessment, CBs in effluent has not been found the significant potential harm to human health (AS < 1), but posed moderate ecological risk to aquatic ecosystem (RQs > 0.1).
Assuntos
Clorobenzenos/análise , Corantes/análise , Indústria Têxtil , Águas Residuárias/química , Poluentes Químicos da Água/análise , Purificação da Água/métodos , China , Ecossistema , Medição de RiscoRESUMO
In this study, the mixing mechanism and phase transition process of different metals during the sintering of tailings bricks with four different metal oxides (CuO, PbO, ZnO, and CdO) at temperatures ranging from 700 to 1100⯰C for 2â¯h were investigated. The properties of the sintered product was characterized and analyzed, and the results showed that the main crystalline phases are quartz, cristobalite, hematite, and mullite while the metal oxides are ascribed to copper ferrite spinel (CuFe2O4), gahnite (ZnAl2O4), zinc ferrite spinel (ZnFe2O4), lead feldspar (PbAl2Si2O8), and cadmium feldspar (CdAl2Si2O8). Further analysis indicates that the heavy metals were transited into spinel or silicate structures with favorable efficiency. This indicates a good heavy-metal fixation effect from the structural change after the sintering process. Finally, the leaching experiments of the sintered samples suggest that the metal leaching decreased to a low and stable value when the sintering temperature was higher than 950⯰C, which meets the China standard (GB 5085.3-2007). The above results indicate that the sintering process facilitates the combination of Cu, Zn, Pb and Cd offering an effective and safe method for the application of materials that contain tailings.
Assuntos
Metais Pesados , China , Cobre , Temperatura , ZincoRESUMO
Studies on the oxidation products of organic pollutants and their toxicity in textile dyeing sludge after the sludge was treated by the advance oxidation processes were limited, since textile dyeing sludge was a complicated mixture. For the first time, simulated sludge was used to study the degradation mechanism of 3,3'-dimethoxybenzidine (DMB) during the combined ultrasound-Mn(VII) treatment. The toxicity of DMB and its products was also evaluated. The results indicated that the compositions and microstructures of polyaluminium chloride (PAC)- and polyferric sulphate (PFS)-based simulated sludge were similar to those of real textile dyeing sludge. The optimum conditions of ultrasound-Mn(VII) treatment were: a KMnO4 dosage of 40⯵M, an ultrasound power density of 0.36â¯Wâ¯cm-3, and a reaction time of 20â¯min. 98.24% of DMB and 63.04% of total organic carbon (TOC) in the simulated sludge were removed. Six products, that is, 2-nitroanisole, 3-methoxy-4-nitrophenol, vanillylmandelic acid, vanillyl alcohol, m-anisic acid, and benzoic acid, were identified by GC-MS and LC-MS-MS. It was noted that all of these identified products were also detected in the real textile dyeing sludge after the ultrasound-Mn(VII) treatment. All of them were less toxic than DMB. Moreover, 53.30% and 54.80% of toxicity toward the alga Desmodesmus subspicatus and the bacterium Vibrio fischeri were removed in simulated sludge, respectively. Therefore, simulated sludge was helpful for studying a pollutant's degradation mechanism in the complex sludge mixtures. The results would also provide some useful suggestions for the sludge disposal after the sludge was treated by the advance oxidation processes.
Assuntos
Esgotos , Poluentes Químicos da Água , Dianisidina , Oxirredução , Eliminação de Resíduos LíquidosRESUMO
Understanding the occurrence states of persistent organic pollutants such as polycyclic aromatic hydrocarbons (PAHs) in textile dyeing sludge is the key to their further treatment and disposal. Here, the effects of inorganic salts (silicate, sulfate, phosphate, hydroxide, and iron salts) that were typically rich in textile dyeing sludge on PAH adsorption by sludge and PAH degradation by an ultrasound (US) combined zero-valent iron/EDTA/Air (ZEA) system were studied in a simulated sludge system. The results showed that the simulated sludge containing inorganic salts had a larger specific surface area, which was beneficial for the adsorption of PAHs. More low-ring PAHs were adsorbed on the surface of the particles in the simulated sludge because of the inorganic salts, which was conducive to low-ring PAHs degradation by US/ZEA. The PAH removal rates were increased by 15.37% and 11.19%, respectively, in the presence of SiO32- and HPO42-. The yield of hydroxyl radicals (OH) was increased by 42.39% and 66.25% by SiO32- and HPO42-, respectively. The reason was that the oxidation of the ligand ([Feâ ¡(EDTA)]) formed by ethylenediaminetetraacetic acid (EDTA) and divalent iron was promoted by SiO32- and HPO42-. The formation of OH in the US/ZEA system was inhibited by the corrosion inhibition of SO42- on zero-valent iron (ZVI), the reaction of ferric salt with EDTA, and the reaction of Mg(OH)2 with the ligand ([FeIII(EDTA)]). This work provides an essential theoretical insight into the role of the inorganic components of sludge in the removal of PAHs by advanced oxidation processes.
Assuntos
Hidrocarbonetos Policíclicos Aromáticos , Esgotos , Ácido Edético , Ferro , SaisRESUMO
Enhancing industrial sludge detoxification is of scientific and practical significance in confronting urban development and stringent environmental regulations. A strategy combining ultrasound (US) with the zero-valent iron/EDTA/Air (ZEA) process was proven to be eco-friendly, being efficient in the removal of toxic compounds from textile dyeing sludge in our previous studies. In this paper, therefore, the detoxification effects of three advanced oxidation processes (US, ZEA, US/ZEA) on textile dyeing sludge were comparatively evaluated for the first time through alteration of the sludge's physico-chemical parameters (e.g., macronutrients, heavy metals, and persistent organic pollutants) and toxicity (plants and aquatic biota), by which the appropriateness of industrial sludge's agricultural use was assessed. The results showed that US led to the least alteration of the physico-chemical properties, and the treated sludge became less biodegradable, as demonstrated by XPS. With ZEA treatment, persistent organic pollutants (POPs) were degraded by oxidation, and heavy metals were more leachable, leading to effective detoxification with a relatively low sludge dose, but an excessive amount of EDTA would negatively change the fertilizing properties of the sludge. However, the integration of US and ZEA could avoid this situation, as US promoted the degradation of EDTA and POPs, thus causing the least inhibition or even a noticeable stimulation of plant growth when the sludge dosage was 7.5â¯tdw/ha (recommended dosage by the latest legislation in China). Aquatic organism toxicity tests further confirmed that US/ZEA treatment realized the most significant toxicity reduction, leading to the slightest environmental disruption. This study could be instructive in providing guidance for industrial sludge management considering agricultural use.
Assuntos
Resíduos Industriais , Esgotos/química , Têxteis , Purificação da Água/métodos , Agricultura/métodos , China , Poluentes Ambientais/análise , Poluentes Ambientais/toxicidade , Metais Pesados/análise , Metais Pesados/toxicidade , Reciclagem/métodos , Testes de Toxicidade , Ondas Ultrassônicas , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/toxicidadeRESUMO
In this paper, a novel strategy integrating ultrasound (US) with a Fenton-like (zero-valent iron/EDTA/air, ZEA) process was proposed for the removal of the refractory and carcinogenic aromatic amines (AAs) in textile dyeing sludge for the first time. The operating condition was optimized as 1.08 W/cm3 ultrasonic density, 15 g/L ZVI, and 1.0 mM EDTA, which could reach degradation efficiencies of 51.79% in US, 72.88% in ZEA, and 92.40% in US/ZEA system after 90-min reaction. Quenching experiments showed that electron transfer reactions generated by the iron ligands in ZEA brought about various reactive oxidative species (ROS), in which Fe (IV), O2Ë-, and ËOH dominated the degradation. US induced sludge disintegration by ultrasonic shear, proven by particle size decrease and supernatant organic matter upsurge, which helps ROS contact with those pollutants in the sludge cavities. Besides, US facilitated the iron redox cycle for oxygen activation by promoting the corrosion of ZVI and stripping considerable ferric ions from sludge iron oxides which were verified by SEM, XRF, and XPS. Graphical abstract.
Assuntos
Corantes/química , Têxteis , Eliminação de Resíduos Líquidos/métodos , Poluentes Químicos da Água/química , Aminas , Corrosão , Peróxido de Hidrogênio , Ferro , Oxirredução , EsgotosRESUMO
A strategy of immobilizing lead in the framework of ferrite-ceramic matrix, to reduce its environmental hazard was explored in this study. The mechanisms of incorporating lead into lead ferrites (δ-phase (2PbO·Fe2O3), γ-phase (PbO·(2-2.5)Fe2O3) and ß-phase (PbO·(5-6)Fe2O3)) was revealed by observing the phase transformation in the products. The δ-phase was dominantly formed at low temperature of 700-800⯰C at Pb/Fe of 1/1-1/3. The significant growth of γ-phase was observed at 750-850⯰C and Pb/Fe of 1/4-1/7. The ß-phase substantially formed at 900-1000⯰C with Pb/Fe of 1/7-1/12. The transformation of δ-phase to γ-phase and/or ß-phase indicated the destruction of δ-phase unit and reconstruction of γ-phase and ß-phase units during sintering process. However, the transformation of γ-phase into ß-phase suggested a structure conversion process, local structural changes arose as a consequence of the addition of Fe2O3. When comparing the leaching ability of δ-, γ- and ß-phase, the results showed the superiority of ß-phase for lead immobilization over the longer leaching period.
Assuntos
Poluentes Ambientais/isolamento & purificação , Compostos Férricos/química , Temperatura Alta , Ferro/química , Chumbo/isolamento & purificação , Cerâmica/químicaRESUMO
Temperature is an important parameter for the performance of bioelectrochemical systems (BESs). Energy-intensive bulk water heating has been usually employed to maintain a desired temperature for the BESs. This study concerns a proof-of-concept of a light-to-heat photothermal electrode for solar heating of a local electroactive biofilm in a BES for efficient microbial energy harvesting at low temperatures as a replacement for bulk water heating approaches. The photothermal electrode was prepared by coating Ti3 C2 Tx MXene sunlight absorber onto carbon felt. The as-prepared photothermal electrode could efficiently raise the local temperature of the bioelectrode to approximately 30 °C from low bulk water temperatures (i.e., 10, 15, and 20 °C) under simulated sunlight illumination. As a result, highly efficient microbial energy could be harvested from the low-temperature BES equipped with a photothermal electrode without bulk water heating. This study represents a new avenue for the design and fabrication of electrodes for temperature-sensitive electrochemical and biological systems.
RESUMO
Textile dyeing wastewater was the focus of much research because of its adverse effect on aquatic biota. In the present research, textile dyeing influent and effluent samples were collected from four textile dyeing wastewater treatment plants (TDPs) in Guangdong province, China, and their conventional indicators and toxicity were examined to reveal relationships. The relationship between toxicity and chemical oxygen demand (COD) was clearly established at individual TDPs. Results indicated the highest removal efficiencies of 94.4%, 90.6%, 91.9%, 94.6%, 92.8% and 97.5% for TOC, mixed-liquor volatile suspended solids (MLVSS), COD, ammonia nitrogen (NH3-N), total phosphorus (TP) and colour, respectively. The primary clarifier used in TDP3 and TDP4 was beneficial for removing macromolecular organic substances, and membrane filtration and sedimentation basin employed at TDP1 and TDP2, respectively, helped to remove toxic substances. Toxicity to V. fischeri or D. subspicatus was found to be related to certain conventional indicators such as TOC, COD, TP, colour, and MLVSS, and was positively correlated with COD in different textile dyeing effluents (R2 > 0.84). It was recommended that the relationship between toxicity and COD in wastewater should be established individually at each plant. Therefore, this study could be useful in providing suggestions for guiding effluent management when no toxicity experiments were conducted.
Assuntos
Indústria Têxtil , Águas Residuárias/toxicidade , Poluentes Químicos da Água/toxicidade , Amônia/análise , Análise da Demanda Biológica de Oxigênio , China , Resíduos Industriais/análise , Oxigênio , Fósforo/análise , Eliminação de Resíduos Líquidos/métodos , Águas Residuárias/química , Poluentes Químicos da Água/análise , Purificação da Água/métodosRESUMO
Cadmium(II) ion can affect the anode performance of bioelectrochemical systems (BES); however, how the presence of Cd2+ affect the extracellular electron transfer of anodic electrochemically active biofilms (EABs), the microbial viability and species composition of microorganism on the anode remain poorly understood. Here, we investigated the inhibitory effect of Cd2+ at different concentrations on the electrochemical performance and the biofilm community in mixed-culture enriched BES. The electrochemical performance of the BES was not inhibited at 2â¯mgâ¯L-1 Cd2+, while higher concentrations of 5-20â¯mgâ¯L-1 resulted in the decrease in the maximum power density, with 0.34⯱â¯0.01â¯Wâ¯m-2 at 5â¯mgâ¯L-1, 0.28⯱â¯0.01â¯Wâ¯m-2 at 10â¯mgâ¯L-1, and 0.17⯱â¯0â¯Wâ¯m-2 at 20â¯mgâ¯L-1, respectively. When adding 30â¯mg/L Cd2+, there was almost no power output. The decline of the power output was possibly ascribed to the suppressed viability and the change of species richness as evident from confocal laser scanning microscopy and microbial community analysis. Cyclic voltammogram and electrochemical impedance spectroscopy revealed that high concentration of Cd2+ exceeding 5â¯mgâ¯L-1 can inhibit the secretion of outer membrane cytochromes, thus reducing the electron transfer between the EABs and the anode surface. Analysis of bacterial structures showed a decrease in Geobacter accompanied by an increase in Stenotrophomonas and Azospira in response to Cd2+ at 10 and 20â¯mgâ¯L-1. This study added to the in-depth analysis of the inhibition of Cd2+ on EABs, and provided new insights into the removing Cd2+ and organics simultaneously in BES.
Assuntos
Fontes de Energia Bioelétrica/microbiologia , Biofilmes/efeitos dos fármacos , Cádmio/química , EletrodosRESUMO
This study quantitatively determined the extraction of lead from CRT funnel glass and examined the mechanisms of thermally reducing lead in the products of sintering Pb-glass with carbon in the pre-heated furnace. The experimentally derived results indicate that a 90.3â¯wt% lead extraction efficiency can be achieved with 20â¯wt% of C addition at 950⯰C for 3â¯min under air. The formation of viscous semi-liquid glass blocked the oxygen supply between the interaction of C and Pb-glass, and was highly effective for the extraction of metallic Pb. A maximum of 87.3% lead recover was obtained with a C to Na2CO3 ratio of 1/3 at 1200⯰C. The decrease of C/Na2CO3 ratio enhanced the metallic lead recovery by increasing the glass viscosity for effective sedimentation of metallic lead in the bottom. However, with the further increase of temperature and treatment time, re-vitrification of lead back to silicate-glass matrix was detected in both Pb-glass/C and Pb-glass/C/Na2CO3 systems. The findings indicated that with proper controls, using C as an inexpensive reagent can effectively reduce treatment time and energy, which is crucial to a waste-to-resource technology for economically recovering lead from the waste CRT glass.